Periodical Services to certain Buildings in Offrs FAFA Md Accn Cariappa Vihar in the area of AGE B/R-II under GE (West) Delhi Cantt-10

Amount

NOTE FOR ALL PAINTING AND WATER PROOFING ITEMS:- The following precautionary measures shall be ensured by the contractor before and during execution of the work:- (i) All the painting works and water proofing works shall be got executed through original material manufacturing company and their authorised applicators as approved by GE and contractor should submit MOU with the manufacturing company and their authorised applicator alongwith performance guarantee otherwise recovery of Rs 2000.00 per week will be made from the contractors dues from the date of commencement of work. (ii) Submission of MOU will be mandatery requirement before execution of work as the entire work shall be executed with the approved firm only. (iii) Contractor shall give guarantee from OEM of 5 years for effectiveness of painting carried out by them from the certified date of completion of work. (iv) Contractor shall deposit entire quantity of material(proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-in-Charge/Office in charge of unit. (v) The materials as required shall be issued to contractor by JE/Engineer-in-Charge on daily basis and the empty containers/bags shall be deposited in the store of Engineer-in-Charge by the contractor,for verification as per standard consumption/coverage prescribed by the manufactures. (vi) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor,glasses and joinery. (vii) The work shall be executed in multy storey buildings up to Eight storey height and cost of suitable scaffolding shall be deemed to be included in quoted rates by the tenderer. (viii) The work will be carried out in following steps as appended below:-

M&L for complete removal of old existing treatment of wall(external/internal) and ceiling finished using mechanical dry wall sander machine (having mechanical vacuum mechanism) having RPM not less than 1500,sanding pad of 320 grit or above to completely remove old existing treatment for wall and ceiling surface and ready to take new surface finishes complete all as specified and directed.

M&L for applying waterproof cement based putty @0.8 kg(undiluted) per sq mtr. Of average thickness 2.5mm in two coats on prepared wall(external/internal) and ceiling surfaces as per sr item No 2.00 above in the following steps:-

(i) Filling cracks in wall using crack seal compound Asian smart care crack seal or equivalent.

(ii) Mix the putty powder @ 0.8 kg/sqm by adding 35to40% water by volume or as per approved manufacturer's instruction and mix it with electric putty mixer with the mixing capacity of min 2.5 kg putty per minute upto 5to10 minutes.

(iii) Apply the first coat of the prepared mix with the help of fully automatic airless spary machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI with bottom to top configuration and allow 6-8 hrs to dry the putty surface.

(iv) Apply the second coat of the prepared mix with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI with horizontal configuration.

(v) Allow 6-8 hrs to dry putty surface then prepare the surface by electronic wall sander machine to apply subsequent coats of primer complete all as specified and directed.

Note:-Primer shall be measured and paid seperately under relevant item.

M&L for applying one coat of acrylic water based exterior grade/interior grade primer @0.9ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI on prepared and wall (external) surfaces as per srl item no.1.10 and 1.20 above.Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for applying two coats of anti fungal weather proof grade exterior acrylic emulsion paint of approved tint @1.8 ltrs/10sqm(undiluted) or as per approved manufacturer's instruction over prepared and primed surface of external wall as per srl item No. 1.10 to 1.30 above.Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed. Make:-Apex Ultima Protex Asian paints/Nerolac excel top guard/Berger weather coat long life 10

M&L for applying two coats of oil bound emulsion distemper on prepared and primed wall (internal) and ceiling surfaces as per sr item No 1.10 & 1.30 above of approved tint including priming with alkali resistant primer complete all as specified and directed

M&L for 15 mm thick rendering in ready mix mortar on walls as whole or in patch on any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding and taking down old plastering complete all as specified and directed.

M&L for 5 mm thick rendering in ready mix mortar on ceiling as whole or in patch on any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding and taking down old plastering complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of Oil bound distemper with roller complete over a coat of wall care putty (minimum thickness 1 mm) all as specified and as directed.

M&L for preparation of new surfaces of ceiling and applying two coats of Oil bound distemper with roller complete over wall care putty (minimum thickness 1 mm) all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint with roller over a coat of wall care putty (minimum thickness 1 mm) complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

M&L for removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on the wooden sufaces over 10cm width or girth complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated wall surfaces and applying two coats of cement based paint of required shade complete all as specified and directed.

M&L for preparation of old decorated wall surfaces and applying one coat of cement based paint complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls including filling depressions/chipping or minor repairs with putty and applying one coat of Oil Bound Distemper including cleaning of OBD stains on floor/window/joinery surfaces complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying one coat of Oil bound distemper with roller complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed .

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staples including wooden beading complete all as specified and directed .

S & F 4 mm thick ordinary sheet glass fixed with clips and putty or with aluminium snap beading including hacking out old glass complete all as specified and directed.

Removal of Vegetation from wall and roof by cutting shrubs, wild growth/tree not exc 30cm girth and removing complete vegetation growth from walls including taking out roots from roof/brick walls and making good the disturbed surface with PCC 1:2:4 type B-0 or CM 1:3 as directed by Engr-in-charge and disposing the rubbish from site (MoD land) for upto double storey block complete all as specified and directed

M&L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed

R. S. Associates (BID ID -3414244)