Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.6 LAccepted-AOC 86 MAHEWA EAST NAINI PRAYAGRAJ U P | PRAYAGRAJ | PRAYAGRAJ | UTTAR PRADESH | 211008 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹25.9 L+₹49,124.50 (1.93%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹28.3 L+₹2.9 L (11.3%)Rejected-Finance 23 47 25D BHAGABARI ROAD ALLAHPUR ALLAHABAD UP | AGRA | UTTAR PRADESH | 282001 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹28.9 L+₹3.4 L (13.4%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹29.0 L+₹3.5 L (13.7%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹37.9 L
EMD Value
₹76,000
Closing Date
27 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Allahabad
Stanley Road, Teliyarganj, Allahabad
Spl repair to certain bldg. (OR Line) of 4 INF DIV ORD unit at Old Cantt Allahabad.
2022_MES_541685_1
8587/E8
Open Tender
Civil Works
Item Rate
180 days
Allahabad
As Per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (East) Allahabad
₹76,000
Yes
29 Sept 2022
28 Jul 2022
29 Aug 2022
28 Jul 2022
27 Aug 2022
13 Aug 2022
28 Jul 2022 - 4 Aug 2022
Amount
Dismantling of AC corrugated or semi corrugated sheet including AC ridges as in roof or wall covering, complete all as specified and directed..
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screws, fixed in repair, complete all as specified and directed.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering / cladding to wall, valley gutter, ridge hips etc, fixed with self tapping screws, fixed in repair, complete all as specified and directed.
Dismantling timber scantlings, as in framed work, 40sq. cm and over in section, in any position, complete all as specified and directed.
Mild steel work in tubular trusses, purlins, rafter, vertical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240, complete all as specified and directed.
Mild steel flat iron wind ties for roof including all necessary drilling, bolting or riveting etc complete all as specified and as directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.
Anodised aluminium snap grid frame work of size 605 mm x 605 mm for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 mm x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.
Non asbestos fibre cement building boards, 4mm thick, fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as speciifed and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Brickwork in half brick thick walls with fly ash bricks, staright or curved on plan to any radius, built in CM 1:4, complete all as specified and directed.
Brickwork with fly ash bricks, straight or curved on plan exceeding 6metre mean radius, built in CM 1:6, complete all as specified and directed.
Taking down cement plaster on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish off the premises, complete all as specified and directed.
Rendering 15mm thick, on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, finished surface even and fair, complete all as specified and directed.
Rendering 15mm thick in CM 1:4, mixed with water proofing compound, on fair faces of brick work or concrete surfaces of walls, finishing the surface even and fair, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
Supply only liquid water proofing compound of approved make, complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved colour over a coat of alkali resistant primer, complete all as specifed and directed.
Preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion paint of approved colour over a coat of primer over 1mm thick wall care putty finish, complete all as specifed and directed.
Demolition of Concrete work (un-reinforced) in ground floors and pavings including floor tiles not exeeding 15 cm thickness (below or above ground level) and removal of debris from the site, complete all as specified and directed.
PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75 mm thick, as in plinth protection laid in bays complete including finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Non - skid Ceramic, jointless coloured tiles 7 to 8 mm thick, size of each tile shall be 600mm x 600mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
Non - skid Ceramic, jointless coloured tiles 7 to 8 mm thick, size of each tile shall be 600mm x 600mm, as in vertical surfaces such as skirting / dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 10 mm thick backing coat in CM 1:3, complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5sq.m but not exceeding 4sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Pressed steel frames for doors of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including preparation of new steel and iron surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. Note: Red oxide primer shall be cattered by the factory itself.
PCC 1:3:6 type C-0 (using 12.5mm crushed stone aggregate) as in fixing of pressed steel frames with and including provision of necessary form work if required complete all as specified and directed.
Flush shutters 35 mm thick, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Second class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each, complete all as specified and directed.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 250mm long, complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed, 200mm long, complete all as specified and directed.
Aluminium alloy handles, cast type, anodised, 150mm long, complete all as specified and directed.
Glazed and skeleton shutters, 35mm thick, second class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with plain, chamfered or rounded mitered beads for securing glass/gauge complete all as specified in SSR Pt- I, section 8, clause 8.24(a) and as directed. Note: Glass or wire cloth, etc. in panels or sash squares shall be measured separately.
Butt hinges, medium weight, cold rolled mild steel, and fixed, 100mm size, complete all as specified and directed.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specifed and direcetd.
Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, 300mm size, fixed in repair, complete all as specified and directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed.
Preparation of new steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Preparation of new wooden surfaces exc 10 cm width or girth with sand or emery paper & applying two coats of synthetic enamel paint over a coat of pink primer , complete all as specified and directed.
Powder coated Aluminium (minimum thickness of powder coating 50 micron of approved colour) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, including concealed type lock for all three shutters, complete all as specified and directed.
Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
Sheet glass, 5.5 mm thick, in square not exceeding 0.5 sq. m in each pane including rubber bead joining cleat for fixing in position for aluminium window/ ventilator, complete all as specified and directed.
Aluminium anodised, barrel tower bolts of extruded section and fixed, 75mm long, complete all as specified and directed.
Floor door stopper of stainless steel body and tongue, anodised, with hard drawn steel spring, fixed in floor, over all length of cover plate shall be 140mm, complete all as speicirfed and directed.
PCC (1:4:8) type D-2 using 40mm graded stone aggregate, 75 mm thick, as in sub base to floor finish, complete all as specified and directed.
Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.
Machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade, complete all as specified and directed.
PCC type-B-1, 1:2:4 using 20mm graded stone aggregate as in Bed blocks, copings, path etc including necessary formwork, complete all as specified and directed.
Stainless steel curtain rod 20mm dia including pair of brackets, complete all as specified and directed.
Providing damp-proof layer in 2 coats of acrylic polymer coating consisting of 1 part acrylic polymer mixed with 2 parts of cementitious powder applied at the rate of 1.4 sqm/kg of mix per coat, complete all as speciifed and directed. Note: (a) Second coat to be applied after 4-6 hours of first coat. (b) 5 days curing to be carried out to the surface before plastering. Make: 'Smart Care damp block 2K' of Asian Paints or equivalent of Dr Fixit, STP, CICA
Taking down carefully point wiring of any type and any description / caping or concealed [light point, fan point or socket point] including removal of battens, pipes, plug sockets, switches, shades, ceiling roses, light fittings etc complete and making good disturbed surface to match the exisitng, complete all as specified and directed.
Taking down main switches, distribution boards and cut outs of any capacity along with the exisitng boards and removing the same from site and making good disturbed surface or portion of walls complete all as specified & directed.
Taking down carefully sub main wiring of any numbers of wire on wooden batten or surface conduit or concealed conduits / casing caping any type complete all as specified & directed.
Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 1.5 sq.mm (nominal area) FR type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories, including provision of concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc, including 1.5 sq.mm FR type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed for the following:-
(a) One light / fan / bell / exhaust fan point, controlled by one one-way 5Amp switch
(b) One 5 pin, 5 Amp socket outlet on the same board with other switches
(c) One 5 pin, 5 Amp socket outlet point on an independent board.
Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 2.5 sq.mm (nominal area) FR type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for socket outlet, 6 pin, 15 Amps including provision of concealed opressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic lmainated sheet of required colour for mounting switch, sockets, fan regulator etc, including 2.5 sq.mm FR type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed.
Switch piano, flush type single pole, one way 5/6 Amp 240 volts, white or ivory, ISI marked, complete all as specified and directed.
Socket outlet, 2 in 1, 5 pin, 5/6 Amps 240 Volts, flush type, fixed in repairs, complete all as specified and directed.
Switch piano, single pole, one way 15 Amp 240 volts, ISI marked, complete all as specified and directed.
Socket outlet, 2 in 1, 6 pin, 15 Amps 240 Volts, flush type, fixed in repairs, complete all as specified and directed.
Ceiling rose, single phase, PVC / polycarbonate, insulated body, three terminals, surface bakelite sheet 63.5mm dia, fixed in repairs, complete all as specified and directed.
Stepped type electronic fan regulator flush type duly fixed on the existing phenolic laminated sheet etc. as required, 240V, humming free, 2 module, ISI marked, fixed in repairs complete all as specified and directed.
Lamp holder, PVC/polycarbonate body with back plate/ cord grip cap suitable for batten/ angle/ pendent fittings, complete all as specified and directed.
Sheet metal enclosure for MCB DBs SPN, 8 way, double door, vertical type, 240 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs, complete all as specified and directed.
Sheet metal enclosure for MCB DBs TPN, 4 way, double door, vertical type, 415 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs, complete all as specified and directed.
MCB, TPN, 63 Amps, 415 V, conforming to 'C' curve, 10kA breaking capacity, complete all as specified and directed.
MCB, SPN, 6 to 32 Amp, 240 Volt, conforming to 'C' curve, 10kA breaking capacity, complete all as specified and directed.
MCB, SP, 6 to 32 Amp, 240 Volt, conforming to 'C' curve, 10kA breaking capacity, complete all as specified and directed.
LED bulk head light fittings 1x10 watt having 600 Lumen enclosed in polycarbonate body, weather proof with co-extruded poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with flexible copper wire or fixed to wall firmly, fixed in repairs, complete all as specified & directed. Make : Havell's Cat Part No. HEXAFT10WLED857SSYMBOPC / Bajaj Model Wee Plus Cat Part No. BIBWP10LED or Philips ENDURA Model No WT202W LED6S CW PSU S1 PC techno-commercially equivalent model in Crompton or as approved by GE.
LED wall mounted tube light fitting, 1x18W, LED 6000K, decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. Make : Havell's Cat Part No. LHEXBHP7INW018 or techno-commercially equivalent model in Crompton or Philips as approved by GE.
LED smartbright spot light fitting, 1x14W, LED 100 lm/W, aluminium housing 5000K, LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. Make: Philips model No ST271T LED 20/840 PSU-EMBIC WH or techno-commercially equivalent model in Crompton/ Havells as approved by GE.
Building security lighting luminaire 36W with unique peanut optics to ensure uniform distribution, hgiher spacing between poles and maintenance free system for city roads and streets, 50% energy saving, IP 66 protection PC and FG cover, high impact resistance complete including LED lamps and all accessories including bracket made out of 25mm bore light grade GI tubing of 1.20metre length bent to shape required and fixed to existing pole or building by means of two Nos MS FI 40mmx6mm clamps with suitable size bolt, nuts and washers and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from fittinge to existing junction boxr of required length, complete all as specified and directed. MAKE:- Cat No. BRP409 LED CW 036 MR FG S1 PSU GR of Philips or Cat No ENDURACITYLITEPLATPLUSSL36WLED757SASYBOPC of Havells or techno-commercially equivalent model in Bajaj / CG
Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth lead of 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:2:4) type B-1 earth chamber and mild steel angle iron frame 25mm x 25mm x 6 mm and 40mm thick pre-cast RCC cover (1:2:4), type B-1 (using 20mm graded crushed aggregate) mix with 6mm dia MS bars @75mm c/c both ways, mild steel handle 12mm dia, PGI funnel and wire mesh, 20mm dia GI pipe light grade(ISI marked) for watering, etc complete all as shown in electrical plate No.3 of SSR Part-1, connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- The quoted rates shall also deemed to include the cost of Earth Test point and earth wire and protection pipe upto 7.5 metre beyond the earth plates electrode.
Sub main wiring complete with 2 runs of 4 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of PVC rigid conduit 20mm dia and accessories connecting terminal ends to DB's including providing 1 run of 4 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring any type and making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 4 sq.mm copper conductor, one run of 4 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.
Taking down / out existing ceiling fan/ exhaust fan for servicing, greasing, replacement of bearing, safety pin, canopy, fan condensor, clamp, rubber reel, nut / bolts as required at site and cleaning and preparing surface, filling cavities with filler including one coat painting with synthetic enamel paint including down rod of approved white colour including marking MES number and refixing in its original position and making all electric connection, complete all as specified and directed.
KRISHNA BAHADUR
Shivagya Engineering
Hi-Tech Constructions
AMARDEEP ENTERPRISES
MS BHAVANA ENTERPRISES
ms shanti sons
G S ENTERPRISES
M/S ATUL CONSTRUCTION
Channa Brothers and Co.
SHIVAM TRADERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .