REPAIRS TO FLOORING JOINERY PLASTERING AND MISC WORK TO MES BLOCK AND IMSC AT OLD NAVY NAGAR COLABA MUMBAI UNDER GE NW NAVY NAGAR

Amount

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) area not exc 1.50 Sqm complete all as specified and directed

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2;4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts or lugs measured from the face of the joint into the wall complete all as specified and directed

S & F Aluminium, anodised, barrel tower bolts 150mm length of extruded section complete all as specified and directed.

S & F Aluminium handles of size 150mm , cast type, anodised complete all as specified and directed

S&F 100mm size stainless steel medium weight butt hinges complete all as specified and directed

Taking down cement plaster of any discription including raking out joints hacking for key scrubbing down with water & removed debrises out of MoD land complete all as specified and directed.

M&L Plastering on concrete/brick surfaces beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately) As per the ground requirement complete all as specified and directed

M&L Sand faced cement plaster 20 mm thick in two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering,including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing complete all as specified and directed

M & L Applying one coat of Rust remover and rust passivator on exposed reinforcement surfaces at any height complete all as specified and directed. Make :- Pidilite fosroc or equivalent as approved by GE

M&L rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches complete all as specified and directed

All as per item No 12 above but 10mm thick in CM (1:3) in ceilling complete all as specified and directed.

M & L Sand faced cement plaster 10 mm thick as in ceiling in CM 1:3, two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, ,including using richer mix for making corners if necessary, at all places and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing complete all as specified and directed

M&L for preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer including 1.5mm thick wall care putty complete all as specified and directed

M&L preparation of new undecorated surfaces of walls,soffits & fascias of chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions complete all as specified and directed

M&L preparation of old undecorated surfaces of walls,soffits & fascias of chajjas etc and applying one coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions complete all as specified and directed

M&L applying one coat of white wash on old plastred surfaces including preparation of surfaces as in wall complete all as specified and directed

All as per item No 19 above but on ceiling complete all as specified and directed

M&L applying one coat of oil bound emulsion distemper on old decorated surfaces including preparation of surface complete all as specified and directed

M&L applying two coats of oil bound emulsion distemper complete removal of existing treatment of wall by washing, rubbing down complete and over a coat of primer including 1.5mm thick wall care putty complete all as specified and directed

Supply only water proofing compound ISI marked.( DR FIXIT) complete all as specified and directed

Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M & L Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 40 mm thick in flooring, complete all as specified and directed

Demolition of brick or stone / boulder work, built in cement mortar in portion/ part ordered to be dismantled including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed

M & L brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed

M&L brick work with sub class `B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L rendering 15mm thick in CM (1:4) on wall finished even and fair without using extra cement as in patches complete all as specified and directed

M&L applying two coats of white wash on New plastered surfaces including preparation of surfaces complete all as specified and directed

S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as specified and directed

M&L applying one coat of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth complete all as specified and directed

M&L preparation of old painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed

Hacking out broken glass panes of any description from wooden frames fixed with beads complete all as specified and directed.

S&F 4mm thick pin headed type ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed.

M&L for Resecuring or easing & adjusting, wooden door shutters without taking down exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed

M&L for Resecuring or easing & adjusting, wooden door shutters without taking down upto 1 sq. m each complete all as specified and directed

M&L for Shutters exc 1 sq. m and n exc 2 sq. m each Refixing in same opening complete all as specified and directed

M&L for Shutters n. exc 1 sq. m each Refixing in same opening complete all as specified and directed

S&F 125mm extruded aluminium handles, fabricated type anodised fixed in repairs complete all as specified and directed.

S&F 100mm extruded aluminium handles, fabricated type anodised fixed in repairs complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section fixed in repairs complete all as specified and directed.

S&F 100mm aluminium anodised barrel tower bolts of extruded section fixed in repairs complete all as specified and directed.

S&F in repairs 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repairs Pillar taps of 15 mm dia , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S & F in repairs Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding water taps waste chain plugs and porcelian stopper but including brackets complete all as specified and directed

S&F CP brass pillar tap 15mm, screwed down high pressure fancy type complete all as specified and directed

S & F 32 mm dia waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed

S & F PVC connectors of 15 mm size with PTMT nuts of length 600 mm length complete all as specified and directed

S & F PVC waste pipe of 32 mm dia 800 mm length complete all as specified and directed

S & F in repairs PVC waste pipe of 32 mm dia 800 mm length complete all as specified and directed

S & F in repairs CP grating of size 100 mm complete all as specified and directed

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed

S &F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed

S & F 30mm thick Flush shutters, solid core construction, with particle board core both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed

M&L applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces over 10cm width/girth complete all as specified and directed

M&L aluminium powder coated drapery rod of 20 mm dia including curtain rings (minimum 6 Nos for each curtain rod) complete all as specified and directed (Make : as approved by GE)

S&F aluminium powder coated fancy type domes cum bracket (20 mm dia) fixed to both ends of the drapery rod and wall complete all as specified and directed (Make : as approved by GE)

Dismantling of Plain or corrugated FRP CGI /GI chajja any Guage thickness including all fittings and removal from MoD land complete all as specified and directed

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed (a) The flashing, caping, as required will be factory manufactured in required shape out of same material as of roof sheeting and fixed by means of self drilling screws. (b) The payment will be done on the actual finished/covered surface area of the sheet. No separate payment will be made for the lap of sheet and accessories, bolts, nuts, washers, adjustable bolts, ridges, supports for gutters and other fixtures. These are deemed to be included in the quoted rates. (c) The galvalume sheets shall be fixed in isolated locations as in chajjas of width not more than 900 mm.

S & F Framed brackets / purlines of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., conforming to Fe 290 Gde E-165 complete all as specified and directed .

M&L applying two coats of synthetic enamel paint over a coat of red oxide on steel newly surfaces over 10cm width/girth incl preparation of surfaces complete all as specified and directed.

S & F 10mm dia 100 mm long dash through fastners bolts in concrete and brick work. complete all as specified and directed

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm girth & not exc 20 cm girth complete all as specified and directed

M&L for filleting in any position and to any shape of section area n.exc 25 Sqcm in cement sand mortar 1:4 including all mitres, stops, complete all as specified and directed

Demolition of plain cement concrete in any description and any position not otherwise provided for i.e. PCC padding including roof treatment with any type of membrane (APP /glass fibre /hassian base felt) etc complete and taking down the debris from roof of height n.exc. 18m and removing debris outside MoD land complete all as specified and directed

M&L for Providing, cement concrete type B1 1:2:4 (20mm graded stone aggregate) in PCC padding / levelling coarse on roof slab, kerbs or mud stops, rounded or chamfered on edges, laid over RCC roof finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing 10 mm thick rendering on cement concrete surfaces in cement mortar (1:4) mixed with water proofing compound whilst the concrete is green , finished even & smooth without using extra cement compete all as specified and directed. (Note: WPC will be measured & paid separately)

Providing roof treatment as under : - (a) Applying bitumenous primer @ 0.30 litres per sqm over cleaned and dry roof surface including parapet (b) M&L for applying a coat of blown bitumen 85/25 grade @ 1.20 kg per sqm over priming coat of roof . (c) Providing and laying 4mm thick APP modified polyester reinforced water proofing memberane with minimum weight of 3.5 kg/sqm , as spefieid. The APP membrane shall be laid using torch-on application with minimum 10 cm side overla and 15 cm end overlapl. The APP memberane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant. (Make : Pidilite Industries/STP/IWL/Tiki Tar (d) Providing polypropylene/polyester, non-woven geotextile fabric of 150 gsm

Taking down shrubs / vegetation growth from crevices completely, upto any height with all safety equipements and spreading of chemical to burn the roots complete all as specified and directed.

Taking down CI soil/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and directed Inclusive of scaffolding of any hight complete all as specified and directed

S & F CI soil/ waste/ vent pipes in any length with or without ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed.

S & F cast iron sand cast pipes , of 75 mm dia in any length fixed with flat iron clamp complete on walls complete all as specified and directed.

Fixing only CI sand cast pipe 100mm bore duly cleaned, obtained from taking down complete all as specified and directed. .

Fixing only CI sand cast pipe 75 mm bore duly cleaned, obtained from taking down complete all as specified and directed. .

S & F CI bends or tee( any radius ) for soil / waste pipes 100 mm bore diminshing pieces or tapers on walls complete all as specified and directed.

S & F CI branch pieces single (equal or unequal ) ordinary or inverted (spigot or socket type) wirh parallel branches for 100mm bore pipe complete all as specified and directed.

S & F Bends or Tee (any radius), diminishing pieces or tapers (larger bore measured) with oval doors of 75 mm dia complete all as specified and directed.

S & F Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted without oval access doors of bore 75 mm complete all as specified and directed.

Taking down AC rain water pipe any size or pattern incl all fittings heads, shoes, bends, swan necks, including cleaning for refixing or removing to stone complete all as specified and directed. .

S & F PVC (SWR) 110 mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with acess door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends of any radius with acess door complete all as specified and directed.

S & F PVC (SWR) 150 mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with acess door complete all as specified and directed.

S&F 150 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.

Demolition of cement concrete un-reinforced not exc 15 cm thick of any description and at any position and removing the debris outside the MoD land complete all as specified and directed. .

M&L 75 mm thick PCC 1:3:6 type C-1 ( 20 mm graded aggregate ) as in sub base flooring and similar works finished even & fair without using extra cement complete all as specified and directed.

M&L for machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment glossy finish ( reflective type) any shape and size ( as approved by GE) Confirming to IS 15658-2006 of 60 mm thick M-35 Grade as in pavements to required level & gradients set jointed over clean dry sand and sealing the ends using PCC 1;2:4 complete all as specified and directed. Note : Sand filling shall be measured and paid seperately

M&L for sand filling under floors or in foundation including watering Cum and consolidation complete all as specified and directed.

M&L coloured glazed cement concrete tiles 300 x 300 x 25 mm thick, machine pressed , glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:6 complete all as specified and directed.

Dismantling floor, hearth, or wall tiling / stone (marble, granite, kota etc) incuding cement mortar bedding with backing etc & rubbish off the premises complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 300x300x 7 to 8 mm thick in floors etc set & jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the coloured tiles over and including 20 mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300 x 200 x 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the colour of tile as in veritical surfaces over and incluing 10 mm thick cement plaster in cm 1:3 complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons complete all as specified and directed.

M&L machine cut kota stone slab 20 to 25mm thick in treads in window cill (provided in two layers with overlap) & length will be as per the length of windows) over and including 15 mm thick cement screed base in cm 1:3 laid and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and mirror polishing and moulding complete all as specified and directed.

M&L machine cut mirror polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L machine cut pre-polished kota stone slab 20 to 25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of cement concrete un-reinforced not exc 15 cm thick of any description and at any position and removing the debris outside the MoD land complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6 ) type C-1 using 20 mm graded stone aggregate as in plinth protection laid in panels finish the top surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed.

S&F in repair towel rail long 600 mm long of PTMT fixed with and including chromiun plated brass screws and wooden / plastic cleats ( minimum weight 190 gms ) complete all as specified and directed.

Dismentling of old pavar block and removing the same from MoD Land complete all as specified and directed. .

Taking down chawkhats or frame (w/o taking off shutters from the frames) not exc 1.50 sq m each & refixing in same opening after making good complete all as specified and directed.

Taking down chawkhats or frame (w/o taking off shutters from the frames) but not exc 1.50 sq m each complete making good surrounding of the dameged portion of window complete all as specified and directed. .

S&F Aluminium anodised section (minimum thickness of anodising 15 micron) for window / ventilator etc of sliding type comprising frame, shutters, locking arrangements including necessary jamming, glazing pins, neoprene beading, glazing pin screw, rollers, handle complete all as specified and directed. Note: (a) Glazing shall be measured separately. (b) Item shall be paid as per weight of aluminium section. (c) Rate quoted shall be inclusive of neoprene beading, glazing clips, screw etc as required which not be measured for arriving the weight. (d) Rate shall be inclusive of star locking arrangement including complete packing with silicon gel around contacting surface of aluminium and including matching the existing surface area complete all as specified. (e) Aluminium window / ventilator etc to be fixed with cadmium plated screw not more than 300mm c/c .

S&F 4 mm thick plain glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed. .

S & F in repairs anodized aluminium DECO grills 7.5mm thick, as existing grills, DG - 102 complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including cutting of reinforcement cut as required to facilitate demolition including removing of debris out side MoD land complete all as specified and directed. . (Reinforcement cut as reqd to facilitate to demotion)

M&L for providing and applying jacketting around columns/beams ,Wall with micro concrete (Molith-MC) M-40 including all lifts, shuttering , drilling holes and fixing shear anchor complete all as specified and directed. (Note : (a) Reinforcement shall be measured and paid seprately (b) Rates including jacketing, formwork and micro concrete)

M&L for replacement of steel reinforcement with TMT bars of appropriate size where 20 % of cross section is reduced including dismantling of rusted steel including application of rust convertor FEOVERT and applying protective coating IPNET - R B complete all as specified and directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel ire(annealed) not less than 0.9mm dia or securing with clips but 6mm dia and 8 mm dia upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M & L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with epoxy grout material complete all specified and directed.

Cleaning of tilles jointer with brush and filling with white cement mix with water proofing compound complete all as specified and directed.

ASHOK CONSTRUCTION

RAMESH ENTERPRISES