Interior and Renovation works in office space of DIPAM at 2nd Floor of Block 14, CGO Complex, New Delhi-03

Grand Total i/c GST @18% 10592574.50 21429667.44

GRAND TOTAL-DSR + NDSR 3,20,22,241.95

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

1 FLOORING WORKS

Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and shuttering-all work

1.01 upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 35 Cum 6326.05 221411.75

ENGINEERED WOODEN FLOORING

Providing and fixing of 14mmm thick engineered Panel 1096-2200x130-207 mm Total thickness 14 mm Numbers of panels

with top layer of 3mm oak with cross edge click installation system and consist of surface layer OAK , middle and bottom layer

-pine. One raw of strips , country grade and finish surface layer of -5 layers of acrylic semi matt lacquer V hardended ( 3

layers of primer lacquer-layers of UV hardened surfacde ceramic lacquer )2. cross edge -click system, transverse lock insert-

HDF average hardness 37Mpa, Dimensional characteristics- consistent with standrd PN-EN 13489.

Providing and fixing made in India Glass mosaic tiles at Floor & finished plain wall surface of size 20 mm x 20 mm x 4 mm in

all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the

wall surface with the help of approved Adhesive AD HOC (2,7 kg) + Epoxy coloured grout FILLGEL PLUS UVR (3 kg) applied

at the rate per sqm. The rate is inclusive of all operation, material and required pattern

Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick

1.04 cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints

with white cement and matching pigments etc., complete.

Supply of 100 mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thichness 1.30 to 1.50mm.

Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

Providing and laying Polished Granite stone flooring & cladding in required design and patterns, in linear as well as curvilinear

portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick

11.56 base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement

1.06 slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent 25.00 Sqm 3908.80 97720.00

TOTAL FLOORING WORKS 684964.75 3486400.00

2 FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power

pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre,

one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre

to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm

dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of

20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs

Digitally signed by AMIT

SINGH 20:48:16 IST

S NO DSR / MR

12.45 DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a

flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as

per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made

with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

STRETCHED FABRIC CEILING : Supply & installationof fabric false ceiling / wall formed out with TRANSLUCENT Printed

fabric coverings made out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width

of 2m, 3m, 4.1m &5.1m with weight of 200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and

uniform with blanq color and light transmission of 50%. The tear strength of fabric should be accordance to CH: 4,5daN; TR:

6,5 daN. The fire rating should be accordance to B-S1, d0. The fabric should be humidity resistant and free of carcinogenic

substances(CMR) or volatile organic Compounds (VOC’s). At labeling in accordance with the French decree no. 2011- 321,

Oeko-Tex standard100 certified. Fabric should be installed with approved manufacturer guidelines. It comes with 10- year

manufacturer guarantee. The installation of TRANSLUCENT Printed fabric should be dry installation & done at room

temperature using PVC, ABS Grippers. ceiling base to be made of MS or Wooden frame finishing to a flush finish of tapered

and square edges in desired design as per architect specification.Supply of LED Lights behind the Fabric Wall/ False ceiling

in modules/ PCB with recommended wattage as per manufacturer's standards to give an effect of ambient lighting. LED of

approved make, LED spacing / Pitch should be atleast 73 -80mm with beam angle of 170 degree, Colour temperature shoud

be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr. LED modules/ PCB should be positioned properly to

provide an even light flow, casting noshadows or dark spots. LED Driver Cost included.

Providing and fixing GI Plain 75mm wide x15mm deep panel upto 6mtr, shall be roll formed out of 0.5mm thick Powder

Coated .The top coat of panel shall be 60 micron polyester coated finish in approved colour. The panel shall be factory cut in

up to 6Mtr OR required length. Accessories Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled

2.03 MR black paint having cut out to hold on panel in a module of 75mm closed. The joint of two carriers shall be joined by means of 30 Sqm 4992.26 149767.79

carrier splices maintaining a module of 75mm .4mm dia galvanized rod with special height adjustment butter fly clips made out

of SS steel sheet. The edge profile G.I.shall be matching with the panel.

Providing and fixing of mineral fibre Acoustic premium, Bubble Finish, 300x1200mmx15mm, NRC = 0.65, Resistance to fire:

2.04 MR REI 90 with Silhouette Black - 15 mm wide grooved grids finished in approved shade. The main runners & coss Tees to have 90 Sqm 2306.00 207540.00

" Click " Installation sytem made of Corrosion - protected high tensile steel or approved equivalent.

Digitally signed by AMIT

SINGH 20:48:16 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing and fixing Acoustic False Ceiling with 0.9 NRC: Mineral Fibre Acoustical Suspended Ceiling System with 15mm

thick Tegular 15/90 Edge Tiles with Suprafine 15mm face exposed grid. The tiles shall have smooth laminated visual with

Humidity Resistance (RH) of 95%, NRC 0.90 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz,

1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 25db as per ASTM E1414, Light Reflectance ≥86% as per

ASTM E-1477, Thermal Conductivity λ = 0.040 W/mK, Colour Global White, Fire Performance of class A2-s1, d0 according to

EN 13501-1 with 15mm Tegular 15/90˚ edge and 8mm drop in module size of 600 x 600mm. The scrim on the face of the tile

shall be cleanable and classified as ISO 14644-1 cleanroom class 5. It shall be suitable for Green Building application, with

Recycled content of 43% and VOC Emissions (French) class of A+. The tile shall have Environmental Product Declaration as

per ISO 14025 and EN 15804+A2. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an

environment friendly product. SUSPENSION: The tile shall be laid on Suprafine 38 with 15 mm wide T - section flanges

colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main

Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall

be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection

limit less than L/360) with a deflection loading of 15kg/m. The end details of the cross tee shall be made of pre hardened steel

and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main

beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg.

The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked

polyester paint with 0T bending capability. All border cross tee/main beam shall be levelled using perimeter fill. To comprise

main runner spaced at 1200mm securely fixed to the structural soffit using suspension system (specifications above) at

1200mm maximum. The First/Last suspension system at the end of each main runner shall not be greater than 450mm from

the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm

long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than

600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees

centrally between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls using

screws at 450mm centre to centre maximum. Installation shall be carried out as per recommended procedure. SUSPENSION

SYSTEM accessories supplied by consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia –

2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally,

adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline

wire to be used for level adjustment during installation purpose in main runners).

TOTAL FALSE CEILING WORKS 916760.00 864179.45

3 WALL FINISHES WORKS

9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position

with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood 1 Cum 131576.95 131576.95

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board

9.21 construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross

3.02 bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 24 Sqm 2015.75 48378.00

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over

all area of door shutter to be measured).

Providing and Fixing-22X922 mm Dtype Handle for wooden doors Material : Stainless Steel. Finish : Satin Stainless Steel

(SSS). of approved make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing SS Mortise Lock Body SB/TB for door thickness 25-50 mm for wooden doors of approved make and

model all complete as per the direction of Engineer-in-charge.

Providing and Fixing Double cylender Floor Spring- for wooden door with Closing Force EN 3 with Maximum door weight 105

Kg. Maximum door width 950mm.Closing speed : 130°

3.06 MR Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested 10 Each 8077.00 80770.00

with 5 Years Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of

Engineer-in-charge.

Digitally signed by AMIT

SINGH 20:48:16 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing and Fixing 22X922 mm Dtype Handle for wooden doors Material : Stainless Steel.Finish : Satin Stainless Steel

(SSS). of approved make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing top and Bottom Strap for wooden doors of approved make and model all complete as per the direction of

Engineer-in-charge.

Providing and Fixing Dead lock Back set- 50 mm with Key Hole for wooden doors of approved make and model all complete

as per the direction of Engineer-in-charge.

Providing and Fixing 60 mm SS Cylinder One side knob and one side regular key (3 key) for wooden doors of approved

make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing Double cylender Floor Spring with Top-Bottom Patch,pivot and Bottom Patch Lock Maximum door

weight 100 Kg. Maximum door width 1000 mm.Closing speed : 120°,Final closing speed : 15-0°. Hold Open (standard): 90°

hold open.Suitable for 10-12 mm glass Weight of floor spring approx : 6kg 5 Years Warranty against manufacturing defect

with 5,00,000 cycles Tested approved make and model all complete as per the direction of Engineer-in-charge.

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including

providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary

holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper

etc.to be paid separately).

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-

blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive

having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4

3.13 MR pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs 30 Sqm 2240.00 67200.00

(indoors) must be endorsed. Contractors payment wouldn't be released until & unless he/she produces orginal warranty

certificate from the manufacturer.

Providing and fixing woodwork 16mm thick forming 600x600mm tiles with Tegular edge. Perforation in the panel will be of

6mm/8mm/10mm or as per architect approval, the wooden ceiling panels to be backed with black acoustic fleece with NRC of

0.4 (NRC 0.8 with 50mm GW of 48kg/m3). The grid should be of “approved make with 24mm/15mm wide T - section flanges

color Black. The main T runner with length and size of 24X38mm/ 15X38mm made from .30mm thick sheet spaced at

3.14 MR 1200mm Centre to Centre and cross T of size 24X25mm / 15X25 made of .3mm thick of 1200mm long spaced between main 25 Sqm 3228.00 80700.00

T at 600mm center to centre to form a grid of 1200X600mm and second cross T of length 600mm and size

24X25mm/15X25mm made of 0.30mm sheet to be interlocked at middle of the 1200X600 mm panel to form grid of

600X600mm and wall angle of size 19X20 The Wooden acoustic panel laminated in desired shade as per Engineer In charge

/ Architect’s approval.

Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by Architect/ Client / Customer,

fixed with compatible neutral grade silicon on a perfectly levelled 12mm thick water proof marine plywood / MDF / Mineral

fibre board which is mounted on RCC wall/any other structure. Lacquered glass must be made industrially (using curtain

coating process); opaque (if viewed against a support wall), uniformly coated with PU lacquer (50 micron thick coating or

3.15 MR more); panel to panel colour consistency (measured by photo spectrometer); highly durable (passes hardness test for 50 Sqm 4408.00 220400.00

minimum 220 oscillations); humidity resistance (conforms to BS EN 1036 1999 or equivalent) ; environmentally friendly

having Low VOC (no lead, no arsenic, no copper, no formaldehyde), low VOC content <100g/l. Silicone used should not react

with lacquer coating (compatible neutral cure silicon)

Digitally signed by AMIT

SINGH 20:48:16 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing and fixing partition upto ceiling height consisting of G.I. frameand required board, including providing and fixing of

frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),

consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor

fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and

0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed ata spacing of 610 mm centre to centre by

6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener

9.105 or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25

3.16 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be

fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick

having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to

metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape,

angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per

manufacture’s specification and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board

conforming to IS: 2095: part 3 (Board with BIS certification marks)

Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab & celling, cladded with Acrylic

Solid Surface 12mm thick sheets straight fabricated on a single face, finished in matte finish, pasted with industrial grade

silicon on a robust substrate. Substrate shall be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural

3.17 MR requirement & duly painted with anti-rust red oxide coating and covered with 12 mm thick water proof ply as per the design 25 Sqm 12039.00 300975.00

and dimensions approved. The proposal includes the cost of preparing appropriate substrate surface over the civil structure

provided, along with material cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS ETC.

Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of Roller

Blindscomprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m,

Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .Thetear

resistance should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch

forquick,easy and safe installation, molded plastic with steel spring support and inserted into the tube end. It shall be drivenby

a ball chain pulley with ball chain and can be positioned at right side or left hand side of the Shade.The Shade whenlowering

or raising, shall be automatically locked in position upon release of the ball chain by means of a built in friction lock.Universal

clutch for left and right hand operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be molded of plastic with a steel

location pin.The plug shall be inserted into the tube end.(Opposite to the Drive Unit) for ease of installation. The SUPPORT

BRACKETS shall be of coated steel & provided with covers and used in right hand or left handpositions differentiated by the

acceptance of the of the rectangular drive unit support or the round idler plug pin.Can beinstalled (a) On Face (b) Ceiling

Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside maximum of 80mm.The ROLLER TUBE shall

be of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shallincorporateakeywayintegral

withthetubetoaccommodatethespline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The

BALLCHAINshall be 2mm diameter cord with 4.5mm diameter acetal balls molded co-axially toit on6mm pitchtoformanendless

ballchain.It is usedforraisingor loweringactionoftheshades.

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per

3.19 MR details of NSL/ Client. Rate to include finishing exposed surfaces of the Pelmet with enamel paint of approved shade or 1mm 90 RM 1627.00 146430.00

WINDOW CILL: Fabricate and install 250x200 (WxH), window cill along external windows. Cill to be constructed out of 18

3.20 MR mm MDF, finished with 1mm. Thk laminate shade as per NSL/ client’s approval. Cost to include edge margin in teak wood 90 RM 1692.00 152280.00

and poilshed in colour matching laminate.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth

3.21 level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 25 Sqm 1018.05 25451.25

3.22 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 25 Sqm 86.45 2161.25

13.4 12 mm cement plaster of mix :

Digitally signed by AMIT

SINGH 20:48:16 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and

smooth complete.

13.60 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

13.60.1 Two or more coats on new work 1500 Sqm 137.85 206775.00

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face,

3.26 and fixed on wooden /steel frame work, complete as per direction of Engineer-in-Charge

9.140.1 12mm thick MDF Board 450 Sqm 1084.60 488070.00

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face,

3.27 and fixed on wooden /steel frame work, complete as per direction of Engineer-in-Charge

MR 4mm thick MDF Board 450 Sqm 656.00 295200.00

Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll

form G.I. sheet with zinc coating of 120 GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm and

0.55mm thick (Base metal thickness) fastened to the floor slab and ceiling soffit using rawl plugs with screw at 600mm

3.28 MR centers, with first & last fixing point at not greater than 50 mm from either end. Boral C studs 50mm wide having one flange of 100 Sqm 946.00 94600.00

34mm, other flange 36mm, lip size 6 mm and 0.55mm thick installed perpendicularly within the flanges of floor and ceiling

channels located directly opposite to each other at not more than 610mm centers. Maintain 5 to 10mm gap between C Stud

and web of U Track.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high

3.29 9.127 density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of

adhesive of approved quality.

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3,

3.30 12.57 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by 250 Sqm 307.35 76837.50

criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

TOTAL WALL FINISHING WORKS 1737166.75 2234546.00

4 MISCELLANEOUS WORKS

Modular kitchen - Under counter storage cabinets:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and

sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply , all ply to be laminated with 0.8 mm laminate.All

shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per

requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick

4.01 MR PVC edge banding, All Shutters finished in high gloss acrylic of approved. The cabinet boxes of floor units will be supported 5 Sqm 23859.00 119295.00

by 100mm height vertical adjustable legs which will be covered with PVC skirting in brushed aluminum finish attached by

hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and rawl plugs. Only

front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet

boxes size would be varies from 400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements

Modular Kitchen - Overhead storage wall units:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and

sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All

shelves should be supported on approved quality SS pins and shall be adjustable for different heights as per

4.02 MR requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick 5 Sqm 17169.00 85845.00

PVC edge banding, All Shutters finished in high gloss acrylic of approved. The unit shall be fixed to the floor/ wall/slab using

metal screws of appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall

be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to

1000X560X710MM (approx.) and join together as per site requirements etc.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels 5 Each 3213.00 16065.00

4.02B MR Providing and fixing baskets 5 Each 3631.00 18155.00

Digitally signed by AMIT

SINGH 20:48:16 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and

the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming

to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20

4.03 22.3 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including 30 Sqm 774.25 23227.50

rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7

kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide

and pasted to each other with bitumen @ 1.7 kg/sqm).

Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-

built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from

roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded

glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc

alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking

having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304

grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100x8mm size for fixing

frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded

at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between

4.04 frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of

approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes, wire

mesh and silicon sealent shall be paid separately).

Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be

Three track three panels sliding door with fly proof SS wire mesh (Two nos glazed & one no wire mesh panels) made of (big

9.147F.4 series) frame 116x45mm & sash 46x82mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double 150 sq m 8766.85 1315027.50

glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6mm

thick clear float glass both side, having 12mm air gap, including providing EPDM gasket, perforated aluminium spacers,

desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-

charge complete.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with

minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the

existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper

4.06 21.17 opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the 8 kg 560.85 4486.80

opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of

4.07 approved steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 500.00 kg 142.30 71150.00

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and

smooth complete.

TOTAL MISCELLANEOUS WORKS 2026609.30 239360.00

Canvas paintings (oil /acrylic medium) Creating design and creation of Art work concept on given subject. With initial visit to

site, preparation of various designs with different material, providing the samples, layout for approval, improvisation in short

5.01 MR listed creative’s and making of final layout for final production by enlargement of drawing as per ratio of actual size, to prepare 20 Sqm 9711.00 194220.00

detailed working shop drawings (full scale) based on the Concept drawings / Views / site conditions.

TOTAL ART WORKS 194220.00

6 HORTICULTURE AND LANDSCAPING WORKS

6.01 MR Supply and Planting Draco plant having 6ft height complete. 20 Each 10354.89 207097.89

Digitally signed by AMIT

SINGH 20:48:16 IST

S NO DSR / MR DESCRIPTION QUANTITY UNIT RATE

DSR ITEM NON DSR ITEM

Supply and Planting Monstera plant having 3-4 ft height complete.

6.03 MR Supply and Planting Lolina plant having 2-3 ft height with Coco-peat, mud and manure complete. 20 Each 1444.89 28897.88

Supply and Planting Seaforthia Palm having ht. 90cm to 1.20 m with 6-8 suckers, well developed, fresh and healthy lush

green leaves from bottom to top complete.

Supply and Planting Rhapis Palm having ht. 90cm to 1.20 m with 15 to 18 equal suckers, well developed, full of fresh and

healthy leaves from bottom to top complete.

Supply of full soil fill conical shaped planters of specified volume and dimensions in stone finish or equivalent. planters to be

indigenously made by rotational moulding, with homogeneous recyclable, industrial grade polymer-resin mix, and textured

surface. planters should have an integrated water outlet hole & plug, single layered peel-proof construction, light weight, rust

6.06 MR proof, uv stabilized, anti-frost feature without any joints, and easy to clean. planter supplier must give 1 year warranty against

any fading or cracking for both indoor and outdoor use. green plant and laying is extra. potting instructions as per company

TOTAL HORTICULTURE AND LANDSCAPING WORKS 486187.10

7.01 MR Company name Logo cut in SS brush 3d letter (SS304) of text ht. 600 and of deph 1.5" font to be cut to sizes and directly

installed on available base as per with approved SS fixtures, including necessary hardware, substructure, extra, as specified 8 Nos. 5600.00 44800.00

and directed by Engineer in charge. The letters shall be back lit.

7.02 MR Various Direction signages of exit and washroom identification with LED glow panel and proper fixture for installation and

connection 20"x9"

7.03 MR Providing making and fixing in position custom made SS siganges of sizes 16"x5"as per Architectural drawings and

instruction with approved SS fixtures, approved base including necessary hardware, substructure extra complete as per detail 21 Nos. 935.00 19634.94

drawing, as specified and directed by Engineer in charge

TOTAL SIGNAGE WORKS 106504.90

Digitally signed by AMIT

SINGH 20:48:16 IST

SCHEDULE OF QUANTITIES - HVAC, AC WORKS

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of 1.6 Ton Heat pump type/ Hot and Cold series

1 MR type invertor 5 star rating Split AC System with 100% copper condensor complete in all respect Each 8 68697.00 549576

as per the directions of engineer in charge

Supply Installation, Testing & Commissioning of 2 Ton Heat pump type/ Hot and Cold series

2 MR type invertor 5 star rating Split AC System with 100% copper condensor complete in all respect Each 19 88073.00 1673387

as per the directions of engineer in charge

Supply, Installation, testing and commissioning including vaccumization and Nitrogen testing

3 MR of nominal sizes suitable for 1.6TR/ 2TR of soft/hard drawn copper refrigerant piping for Split Metre 270 2056.00 555120

Supply, installation, testing and commissioning of uPVC Pipe, complete with fittings, supports,

4 MR U trap arrangement, Clean Plug with 6mm nitrile insulation and accessories as per Metre 270 343.00 92610

specifications, drawings 25 mm dia

5 MR Supply, installation, testing and commissioning suitable MS stand for outddor units of split AC Each 27 3015.00 81405

Total HVAC WORKS 0.00 2952098.00

1 Digitally signed by AMIT

SINGH 20:48:16 IST

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR NO TOTAL AMOUNT TOTAL AMOUNT

DSR NO TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

2021 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY)

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE: 630X460X130

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 6 2554.00 15324.00

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 6 17845.00 107070.00

SET, SIZE: 375X520X400 MM

MR 6 Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE EACH 6 6116.00 36696.00

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

MR 8 ADJUSTABLE WITH WALL FLANGE 15mm EACH 6 4821.00 28926.00

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH

8mm DIA 1.2 METER LONG FLEXIBLE TUBE AND WALL HOOK

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM

CONCEALED CISTERN BODY WITH INSTALLATION

MR 10 KIT & “S-TYPE” DRAIN PIPE CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH EACH 6 10793.00 64758.00

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.10 11 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and

making good the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6 mm thick Each 6

hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

17.34 14 Providing and fixing toilet paper holder

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

18.53 15 quality conforming to IS : 8931

1 Digitally signed by AMIT

SINGH 20:48:16 IST

DSR NO TOTAL AMOUNT TOTAL AMOUNT

DSR NO TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

2021 DSR (INR) NON-DSR (INR)

18.53.1 15 mm nominal bore Each 12 500.35 6004.20

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

17.61 16 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 17 Cutting holes upto 30 X 30 cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 6 362.40 2174.40

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching M 6

18.78 18 surface after housing G.I. pipe etc. 171.80 1030.80

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

18.7 19 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes M 30 325.10 9753.00

18.7.3 25mm nominal outer dia pipes M 15 408.55 6128.25

18.7.4 32mm nominal outer dia pipes M 15 500.95 7514.25

18.7.5 40mm nominal outer dia pipes M 5 674.35 3371.75

18.7.6 50mm nominal outer dia pipes M 5 927.00 4635.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing.

18.8 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes M 20 441.15 8823.00

18.8.2 20mm nominal outer dia pipes M 12 513.75 6165.00

18.8.3 25mm nominal outer dia pipes M 5 626.05 3130.25

18.8.4 32mm nominal outer dia pipes M 5 712.75 3563.75

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

21 standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore Each 1 708.40 708.40

MR 22 Supply, Installation, Commissioning and Testing of 15 Litres Geyser for hot water Each 5 16640.00 83200.00

2 Digitally signed by AMIT

SINGH 20:48:16 IST

DSR NO TOTAL AMOUNT TOTAL AMOUNT

DSR NO TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

2021 DSR (INR) NON-DSR (INR)

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

23 alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

MR nominal size) including cost of shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-

charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 60.00 536.00 32160.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) metre 10.00 416.00 4160.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

MR 24 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

MR complete in all respects.

MR Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser each 10 536.00 5360.00

MR 26 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. each 10 726.00 7260.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover

MR 27 with screws and other required fitting complete as required. each 10 1001.00 10010.00

3 Digitally signed by AMIT

SINGH 20:48:16 IST

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit,

1.10 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface

1.55 / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

A.3 1.5 cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC Metre 4170 433.00 1805610.00

insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core

A.4 1.6 cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC Metre 20 662.00 13240.00

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 226 122.00 27572.00

1.24.5 6 pin 15/16 amp socket outlet Each 54 197.00 10638.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.6 1.26 excluding modular plate as required. Each 50 40.00 2000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

1.27 existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1.14 insulated copper conductor, single core cable in surface/ recessed steel conduit as required

1 1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre

Digitally signed10by AMIT 233.00 2330.00

SINGH 20:48:16 IST

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

B.1 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 10 439.00 4390.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 60 1005.00 60300.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 30 1365.00 40950.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

MR Conductor Cables :

Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

C.2 (a) 3.5 C x 120 Sqmm XLPE cable 874.00 43700.00

(b) 3.5 C x 95 Sqmm XLPE cable RM 20 699.00 13980.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 20 579.00 11580.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 20 426.00 8520.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 20 673.00 13460.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

D.2 connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

2.13 complete with connections, testing and commissioning etc. as required.

2 Digitally signed by AMIT

SINGH 20:48:16 IST

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN

MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A

2.5 tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but

D.4 without MCBs and C75incomer ) as required . (Note : Vertical type MCB

TPDB is normally used where 3 phase outlets are required.)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the

existing MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

E.1 1.24.7 TV socket outlet Set 16 148.00 2368.00

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor,

MR unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as required.

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 5 3603.00 18015.00

E.3 (b) 225mmx38mm(GI) - 3 compartment Mtr 5 2960.00 14800.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at

the intersection of raceways supplied completely with base and cover plates, height adjustable

MR junction box 65-90 mm including all accessories complete in all respect as per the directions of

engineer incharge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.5 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 480 47.00 22560.00

surface/recessed steel/ PVC conduit as required

3 Digitally signed by AMIT

SINGH 20:48:16 IST

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe of SET 4 13838.00 55352.00

2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 200 70.00 14000.00

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA

sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors fabricated

from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear

access for cable alley and with segregated bus-bar chamber with tinned aluminium bus bar and Each 1 279690.00 279690.00

including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch boards

complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

G.1 MR Colour: Gray Powder Coated, as per approved sample.

1 nos, 320 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 400 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -4 Nos.

(b) 40 Amps, TPN, MCB - 6 nos

(c ) 100 Amps TPN MCB - 1 nos

Panel complete as above

H SAFETY ITEMS

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

H.1 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 1 269.00 269.00

front side as required

4 Digitally signed by AMIT

SINGH 20:48:16 IST

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2

H.2 2.22 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 1 292.00 292.00

front side as required

Supply, Installation, Testing and Commissiong of High Efficient 15 kVA Model IGBT Rectifier &

IGBT Inverter, Modular Fault Tolerant designFailure in any one of the module the others keeps

supplying to the load without interruption. Approved Make, 12V VRLA Batteries, 65 AH or

saiuitable for 30 minutes backup. Exide (10 nos on each bank) Make Exide, Accessories (

I.1 MR Cabling between UPS and the Battery upto 10 Mtr distance for each UPS considering cable SET 1 611916.00 611916.00

Routing,Battery Rack and Battery Interlinks, lugs etc ) DC MCCB between UPS and Battery

complete in all respect as per the directions of engineer in charge. UPS shall produce 30

minutes backup.

Total of Electrical items 2949264.00 1441330.00

5 Digitally signed by AMIT

SINGH 20:48:16 IST

S NO DSR/ MR Description UOM Qty Rate DSR Amount Non-DSR Amount

A. UTP Components for Data

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

1 (DSR existing surface/ recessed Steel/ PVC conduit as required METRE 4880 57.00 278160.00

1.53.1) (23 AWG solid copper conductors for Connectivity of Hub room to End Point.High

Supply,Gigabit Ethernet

Installation, U/UTP,

Testing and250 MHz, ClassofE,I/O

Comissioning 23port

AWG, forUnshielded

at Work Station end. Keystone Unshielded Outlet, 180DG C6, Blue

Supply, Installation, Testing and Comissioning of I/O port for CAT6 cable termination

at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

4 MR information outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG 122 400.00 48800.00

U/UTP Patch Cord Blue, LSZH, C6, 2M Nos.

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

5 MR information outlet (I/O) to end user device connectivity. (Rack end), High Speed 122 950.00 115900.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M Nos.

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Data Active

UTP Components for VOICE

Supply , Installtion , Testing and Comissioning of 4 Port British Style Shuttered Face

7 MR Plate white for I/O fixing at user side 122 275.00 33550.00

Total : A - UTP Components 278160.00 336850.00

B 200 Pair MDF Box

1 MR 200 Pair MDF Box with mounting Frame Nos. 1 17500.00 17500.00

2 MR 10 Pair Krone Module Nos. 4 900.00 3600.00

3 MR 25 Pair Riser Cable Mtr. 35 1253.00 43855.00

Total : B - MDF Box 0 64955.00

GRAND TOTAL A+B 278160.00 401805.00

GRAND TOTAL A+B 278160.00 401805.00

Digitally signed by AMIT

SINGH 20:48:16 IST

S No Description Unit Qty Rate DSR Amount Non DSR Amount

A. Active Component for Data, Wifi

Supply instllation testing and commissioning of Access Switch of 48 x 1G POE+, 4 x

SFP+ , 370W PoE, Switching Capacity of switch is of 176 Gbps having Forwarding

performance (64-byte packet size): 130 Mpps, Secure Shell (SSH), RADIUS,

1 TACACS + DRAM 2GB , Flash 2GB , 10K IPv4 Routes ,1K multicast Routes ,16K Nos. 2 246954.00 493908.00

MAC address , 16K flow entries L3 Protcols like OSPF , PBR, MACsec, PIM , QOS

from day-1 , As Approved by NSL Incharge.

SITC of 48 port 10/100/1000 Base T Switch with 4 x 10G SFP+ ports,The Switch

should have 16K MAC address, Should have RJ-45 console port should

support MSTP and DUAL configuration, Should support Static Route Entry: IPv4

124; IPv6 50 , Should support IP-MAC- Port Binding strictly management network

2 devices preventing illegal access and the Man-in- the-middle attack, Should support Nos. 2 187641.00 375282.00

Asymmetric VLAN, Auto Voice VLAN, Should support Cable diagnostics, Time-

based PoE: PoE ports can be turned on/off by port or system through

schedule, Operating Temperature -5 to 50°C (23 to 122°F). As Approved by NSL

3 Supply, Installation, Testing & Commissioning of Modules 10G. Nos. 5 49920.00 249600.00

Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the growing

requirements of wireless networks by delivering a better user experience. The 1830

4 Series extends support to a new generation of Wi-Fi clients, such as smartphones, Nos. 6 68820.00 412920.00

tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or

Wave 2 support.

5 Providing and laying of LC- LC multimode OFC type patch cord for data and voice. Nos. 5 3850.00 19250.00

Supplying, installing, testing and commissioning of Cabinet. Size 24U (800 X 800

mm) (WXD) following accessories, Width (mm) 800, Depth (mm) 800, Approx.Net

Wt (kg) 75, CRCA 'D' Grade thickness (mm) 1.2, RAL 9017(Matt Black), Glass: 4mm

Toughened Tinted Glass Door,Injected one piece polyurethane gasket on frame,

Accessories: Cooling Fan (230V A/C 90 CFM) - 4 Nos, Cable Manager Metal- 4

Nos,PDU 230VAC - 1 No (12 nos. 6A/16A sockets with plugs 6A/16A - 1/1pc & MCB

6 16A/32A -0/1 Pc), cable channel 100mm wide 24U- 2 Nos,Heavy Duty Stationary EACH 2 38551.00 77102.00

shelf M6 screws,washer,cage nuts (nickel coated))3 Nos. Earthling Strips 150mm H -

1 No, Door Lock - 1 No, Castor Wheels (with Brake) - 2 Nos, Castor Wheels (without

Brake) - 2 Nos, Front Metal Band - 1 No. Packing: 5 ply cardboard & Inside 28 ply EP

foam. In the rack there must be maintained 1 U = 1.75 inches space. Nos. 1 etc

complete as required

Total : A - Active Component for Data, Wifi 1628062.00

Digitally signed by AMIT

SINGH 20:48:16 IST

SCHEDULE OF QUANTITIES - CCTV works

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal Proof Dome

camera with 2.8 to 12mm Motorized Lens,Smart IR, up to 30M IR distance,Up to 120 dB

WDR (Wide Dynamic Range),3D DNR (Digital Noise Reduction),H.265+, H.265, H.264,

MJPEG,Corridor mode, Triple streams,3-Axis, IP67, IK10 Vandal Resistant,Colour:

0.005Lux (F1.4, AGC ON), 0 Lux with IR,Video Compression H.265+, H.265, H.264,

1 MR MJPEG,Behavior Detection Intrusion, Crossing line, Motion detection, Object left, Missing Nos 6 32000.00 192000.00

object,Intelligent Identification Face detection, Defocus, Scene Change,PoE (IEEE802.3

af) Power consumption: Max 7.2W,Edge Storage Micro SD Card, Up to 256GB, ANR

Support,Working Environment -40°C ~ +60°C, Humidity ≤ 90% RH(Non-condensing),

Compatible Integration ONVIF (Profile S/G), API.

Supply, Installation, Testing and Commissioning of 16Ch Embedded Network Video

2 MR Recorder with 4 Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, Nos 1 52000.00 52000.00

Redundant power supply, Smart Analytics and ONVIF

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category Only complete etc as

3 MR required.etc.all complete. Nos 2 27000.00 54000.00

Supply, Installation, Testing & Commissioning of 55" Flat Screen HD led (24X7) with

Interfaces include HDMI, DVI, D-sub, Component and Composite input as well as RS-

4 MR 232C and RJ45 for extensive connectivity, remote control and wall mount unit / floor stand Nos 1 68000.00 68000.00

complete with making connections etc complete as reqd.

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 2 6200.00 12400.00

Total : A - CCTV 378400.00

Digitally signed by AMIT

SINGH 20:48:16 IST

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Luminaire Description Image UOM QTY Rate

Supply, Installation, Testing and Commissioing of Modular

recessed/suspended luminaire HPE (High Performance Efficiency) LED (Light

Emitting Diode), system power: 44W, Luminous flux of luminaire 4840 lm, 110

LM/W system efficacy, colour temperature of 4000 K, neutral white, CRI > 80,

230V constant current driver, 70% of luminous flux after 50,000 operating

hours, Energy efficient LEDs, Direct light emission, Luminaire profile in

1 MR aluminium, Polyester powder aluminium white coloured coat applied over a 5- no 7 11760.00 82320.00

stage pre-treatment, Snap fit satin diffuser for a homogenous light distribution

ZHLS(ZERO HALOGEN LOW SMOKE) internal wiring, integral electronic

control gear, Protection class I, IP 40, MacAdam 3, T.H.D ≤ 10%, driver

efficiency ≥ 88%, surge protection of 2.5kV,

Supply, Installation, Testing and Commissioing of Recessed downlightwith

HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system

power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy,

Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours; energy-efficient

2 MR LEDs, direct light emission, housing in die-cast aluminium, Polyester powder no 66 1750.00 115500.00

white coloured coat applied over a 5-stage pre-treatment trim, prismatic

diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW

SMOKE) wiring, Electronic control gear, Protection class II, IP 40,

Supply, Installation, Testing and Commissioing of COB based surface

mounted/pendent downlight, system power: 10W, 110 Lm/W, luminous flux of

luminaire 1100lm, colour temperature of 4000K, 230V constant current driver,

70% of luminous flux after 50,000 operating hours; energy efficient LEDs,

3 MR direct light emission, housing in aluminium, round, polyester Silver powder no 2 4500.00 9000.00

coat applied over a 5-stage pre-treatment, aluminium reflector, 50x80

elliptical beam,Electronic Control Gear, Protection class I, IP20, Ø = 100

Digitally signed by AMIT

SINGH 20:48:16 IST

S NO DSR/MR Luminaire Description Image UOM QTY Rate

Supply, Installation, Testing and Commissioing of Modular recessed luminaire

with HPE (High Performance Efficiency) LED (Light Emitting Diode), system

power: 14W, Luminous flux of luminaire 1540 lm, 120 LM/W system efficacy,

colour temperature of 4000 K, neutral white, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours, Energy efficient

LEDs, Direct light emission, Luminaire profile in aluminium, Polyester powder

4 MR aluminium white coloured coat applied over a 5- stage pre-treatment, Snap fit no 32 3750.00 120000.00

satin diffuser for a homogenous light distribution ZHLS(ZERO HALOGEN

LOW SMOKE) internal wiring, integral electronic control gear,

Protection class I, IP 40, MacAdam 3, T.H.D ≤ 10%, driver efficiency ≥ 88%,

surge protection of 2.5kV, L =1187 mm, B = 64 mm, H = 64 mm, L(ET) = 1175

Supply, Installation, Testing and Commissioing of Recessed downlight

luminaire with HPE (High-Performance Efficiency) LED (Light Emitting Diode)

system power: 8 W, Luminous flux of luminaire 760 lm, Colour temperature of

4000 K, Neutral white, SDCM 3, CRI > 80, 230 V constant current driver, 70%

of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct

5 MR light emission, Luminaire housing in aluminium, Polyester powder-white no 170 1700.00 289000.00

coloured coat applied over a 5- stage pre-treatment, Prismatic diffuser for

homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE)

wiring, electronic control gear, Protection class II, IP 40

Supply, Installation, Testing and Commissioning of LED Strip Light of min 5 W

per meter with all accessories complete in all respect

TOTAL 781720.00

Digitally signed by AMIT

SINGH 20:48:16 IST

SCHEDULE OF QUANTITIES - FIRE ALARM & PA System

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of smoke detector with builtin LED and

17.1.2 1 mounting base complete with all connections etc as required. (Note: must be compatible with No 46 1153.00 53038.00

existing fire alarm system)

Supplying, installation, testing & commissioning of manual call boxes of MS construction in

surfaces/recess with stainless steel chain and hammer assembly complete with glass and

push buttoninstallation,

Supplying, etc. as required.

testing & commissioning of fire alarm sounder with facility to make

announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for

Supplying,with amplifier testing

installation, i/c line matching transformer

& commissioning of 6etczone,

controller with USB,

17.3.1 4 MP3 player (including 6 zone button paging station) with seamless integration facility with main No 1 126411.00 126411.00

fire alarm panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms

operating at 240 Volt AC Supply complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

17.5.2 7 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete Mtr. 276 173.00 47748.00

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

17.5.3 existing surface/ recessed steel conduit of following pairs, cores and size including

8 connections and interconnections etc. as required.

17.5.3.2 Speaker cable Two pair, 2-core, 1.5 sqmm Mtr 340 89.00 30260.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

accessories like coupler etc. as required.

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

backup complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

microphone assembly complete as required.

TOTAL FIRE ALARM WORKS 539486.00 15480.00

1 Digitally signed by AMIT

SINGH 20:48:16 IST

SCHEDULE OF QUANTITIES - EPABX

S.NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S.NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of Analog based EPABX with 8

1 incoming lines and 48 extensions complete in all respect Nos 1 47970.00 47,970.00

Supply Installation, Testing and Commissioning of Analog Speaker Phone with

Digitally signed by AMIT

SINGH 20:48:16 IST

Schedule of Quantities: Furniture

S No Item Specifications Size Qty Rate Amount Ref. Image

Supplying & placing of table of length 1650 0+ side unit ,overall dimension :1650mm x1650 mm x750mm Primary Work Surface-

Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to

top.Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to

top. Secondary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC

membrane pressed on to top.Modesty Panel- Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998

with 0.4mm PVC membrane pressed on to top. Understructure- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and

approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal- Made of 1650mm x1650

25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with mm x750mm

matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998

with 0.4mm PVC membrane pressed on to top.Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long

metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided

for ease of opening.Pedestal is provided with lock for security.The prodcut should be GREENHGUARD & GRIHA certified.

Supplying & placing of table of length 1800+ side unit ,overall dimension :1800mm x2100 mm x750mm Primary Work Surface-

Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to

top.Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to

top. Secondary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC

membrane pressed on to top.Modesty Panel- Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998

with 0.4mm PVC membrane pressed on to top. Understructure- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and

approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal- Made of 1800mm x2100

25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with mm x750mm

matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998

with 0.4mm PVC membrane pressed on to top.Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long

Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided for

ease of opening.Pedestal is provided with lock for security.The prodcut should be GREENHGUARD & GRIHA certified.

Supplying & placing of table of length 2350+ side unit ,overall dimension :2350mm x2350 mm x750mm Primary Work Surface-

Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to

top.Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to

top. Secondary Work Surface- Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC

membrane pressed on to top.Modesty Panel- Made of 25mm thick MDF one side pre- laminate board confirming to IS-14587:1998

with 0.4mm PVC membrane pressed on to top. Understructure- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and

3 Main Desk approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal- Made of 2350mm x 2350 5 1,31,104.00 6,55,520.00

25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with mm x 750mm

matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998

with 0.4mm PVC membrane pressed on to top.Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long

metal Panel Drawer Slides. Drawer extension is 325 MM.Drawers have a soft closing & anti slam mechanism.Handles are provided

for ease of opening.Pedestal is provided with lock for security.The prodcut should be GREENHGUARD & GRIHA certified.

The Back Unit shall be of dimensions 2350mm x 500 x 750mm. It shall be made of 25mm thick MDF – one side prelaminate

boardconfirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-

laminated twinboard of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. Shutters are made of 2350mm x

25mm thick MDF one sidepre laminate board with 0.4mm PVC membrane pressed on top. Shutters have a soft closing & anti slam 500mm x 750mm

mechanism.Handles are provided for ease of opening. Storage is provided with lock for security.

Supplying & placing of confrence Unitized Table of size 3600 X 1500 X 740 mm Work top--Made of 25mm Thick Pre-laminated twin

board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.

Soft closing dual access flap provided for access to power supply and data cables. Understructure-The Under-structure consists of

mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge

banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving 3600mm x

5 Mingle Table the aesthetics. The product has a knock-down construction. Wire Management-A wire raiser made of 0.8mm CRCA MS IS:513. It is 1 61,910.00 61,910.00

epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for

standard 8 module is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg.

HDMI,VGA-A,etc).The product should be GREENGUARD certified.

Digitally signed by AMIT

SINGH 20:48:16 IST

S No Item Specifications Size Qty Rate Amount Ref. Image

Supplying and placing of workstation of size 1200X 600 with KBPT + pedestal :Providing and placing DESK based modular

workstation with System ht - 750 mm .Understructure - The slanted legs with perforated metal modesty in between are connected to

the understructure with the help of PDC Connectors to provide a stable and sturdy base for the worktops. Modesty panel shall be of

Metal 1.2 mm thick CRCA. Wire Management : Metal powder coated power box with wire raiser+D56 is given to pull wires from the 1200mm x

6 Workstation floor junction box upto the power box fixed under neath the worktop. Aluminium access flaps on worktop above power box cut out for 600mm with 16 28,359.00 4,53,744.00

accessing switches.Worktop mounted metal modesty made from 0.8 mm thk CRCA (IS: 513) is provided.Worksurface - out of 25 KBPT + pedestal

mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d.Pedestals flat metal front, full ht free

standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. .The product should be GREENPRO, SCS

IAQ, GRIHA, BIFMA certified.

Modular Panel based Workstation Pentagonal of size 1500mmx1500mm & Panel Height of 1050mm and worktop height of 750mm

with KBPT+ 2 Dr. Pedestal and CPU trolley The panel thickness of 52 mm with tile based configuration. Top tile of fabric laminated 1500mm x

7 Workstation with cutout on the tile for switches. The worktop of 25mm thickenss with PVC edige lipping and frames are CRCA steel power 1500mm x 4 50,267.00 2,01,068.00

coating with base of CRCA legs.The product should be GREENPRO, Greenguard,AIOTA,SCS IAQ, GRIHA, BIFMA certified.The 600mm

OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007 certified.

Supplying & placing of 1 str Sofa:seat foam: the seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional

top layer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should

be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr,

8 Sofa 1 seater upholstered with fabric or leatherette understructre : understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood, 12 30,653.00 3,67,836.00

dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly:

it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.Width (W): 860.0 CM. Depth (D): 905.0 CM.

Height (H): 82.0 CM. Seat Height (SH): 45.0 CM.

Supplying & placing of 2 str Sofa:seat foam: the seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional

top layer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should

be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr,

9 Sofa 2 seater upholstered with fabric or leatherette understructre : understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood. 2 39953.00 79,906.00

dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly:

it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.Width (W): 1460.0 CM. Depth (D): 905.0 CM.

Height (H): 82.0 CM. Seat Height (SH): 45.0 CM.

Supplying & placing of 3 str Sofa:seat foam: the seat should be made of pu foam with density 32 ± 2 kg/cu.mtr having an additional

top layer of j pu foam with density 28 ± 2 kg/cu. seat should be upholstered with fabric or leatherette. 2) back foam: the back should

be made of pu foam with density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 23±2 kg/cu. mtr,

10 Sofa 3 seater upholstered with fabric or leatherette understructre : understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood 12 48908.00 5,86,896.00

dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly:

it should be a welded assembly made in stainless steel (grade ss 202) tube & plate.Width (W): 206.0 CM. Depth (D): 92.0 CM.

Height (H): 82.0 CM. Seat Height (SH): 45.0 CM.

Supplying & placing of Centre Table: Supplying and placing in position of the following specifications. Glass shall be 10+/-0.3mm

thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded

11 Centre Table assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 8 15531.00 1,24,248.00

cm, Depth=60.0 cm, height=34.9 cm.

Supplying & placing of Corner Table: Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in

12 Corner Table SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per 10 10,319.00 1,03,190.00

IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=34.9 cm.

Digitally signed by AMIT

SINGH 20:48:16 IST

S No Item Specifications Size Qty Rate Amount Ref. Image

1. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded

Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner

moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric.

* Full Back Size : 45.5 cm. (W) x 53.0

2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in

Density 45±2 kg/m3, and hardness load 16 ± 2 kgf as per 15:7888 for 25% compression.

3. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are

cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without

need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back

movement during posture changes. The "5" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector

moulded in glass-filled Poly-am)de form the back-spine structure involved in multi-dimensional recline motion.

Workstation chair- The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension

high back (return force) is user weight dependent.

4a ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-

filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6±0.5cm. The Armrest Top is made up of

integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide.

4b PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment

stroke of 9.2 ± 0.3 cm

4c PEDESTAL ASSEMBLY: The pedestal is injection moulded in glass-filled Poly-amide and fitted with 5 nos. in wheel castors.

The pedestal is 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors.

„TWIN WHEEL CASTORS: 5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0±0.1cm heel diameter and

assembled to the pedestal.

Supplying and placing in position high back chair of the following specifications. The seat shall be made up of 1.2+/-0.1cm thick hot

pressed plywood measured as per QA method described and upholstered with synthetic leather over molded High Resilience

polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood. The HR polyurethane foam shall be of

density 55+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be-

49.0cm(W) x 51.4cm(D) and of back shall be 51.8cm(W) x 75.2cm(H). The armrest top is PU molded over metal insert and the

height adjustable armrest structure is powder coated. The armrest height shall be adjustable up to 8.0+/-0.5cm in 8 steps. The

mechanism of the chair shall have following features : 360⁰ revolving type, Front Pivot synchro mechanism, Tilt tension adjustment,

Single point control, 4 position locking with anti shock feature, Seat/back tilting ratio of 1:2. The back can be adjusted in 5 positions

manually for correct position of lumber support. Stroke of height adjsutable spine is 7 cm. The chair shall be provided with pneumatic

height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestial shall be injection molded in black 30% glass filled Nylon

and fitted with 5 nos. twin wheel castors. The size of the pedestal shall be 66.0+/- 0.5 cm pitch-centre-dia (76.1 +/- 1.0 cm with

castors). The twin wheel castors shall be injection molded in black nylon. The seat can be slided horizontally as per user

convenience having a stroke slide of 5 cm. Overall dimensions of Chair shall be, Width of Chair - 76.1cm, Depth of Chair - 76.1cm

as measured from pedestal below. Height from ground - min 102.0 to max 119.0cm. Seat height - min 45.0 to max 55.0cm.

Dimensions tolerance / variations shall be within +/- 1 cm.

Supplying and placing in position visitor chair of the following specifications. The seat shall be made up of 1.2+/-0.1cm thick hot

pressed plywood measured as per QA method and upholstered with synthetic leather over molded High Resilience polyurethane

foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood. The HR polyurethane foam shall be of density 55+/-2kg/m

³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 51.4cm(D) and

15 visitor chair of back shall be 51.8cm(W) x 75.2cm(H).The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. 20 11990.00 2,39,800.00

Tubular frame : the powder coated (DFT 40-60 microns ) tubular frame is cantilever type and made of 2.54=-0.03 cm x 0.2 =-.016

thk M.S.E.R.W tube. Overall Dimensions of Chair shall be Seat Height - min 43.3 to max 54.3cm, Height - min93.5 to max 104.5cm,

Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

Supply of high Back chair. The seat should be made up of 1.2 + 0.1cm thick.hot pressed plywood .The Back should be made up of

injection moulded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn. SEAT SIZE (Depth) 47.0 cm. (W) x 49.5

cm. (D) & BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H). The HR polyurethane seat foam is moulded with density 45+/-2 kg/m3. The

adjustable armrest is designed with the following features -Up-Down adjustment— 8 steps. Height adjustable armrest structure

which is Powder Coated & fitted with an armrest top.The Lumbar support consists of polypropylene pad with moulded polyurethane

foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear

16 High back chair side of the pad. Lumbar pad has an adjustment of 8.0 cm in height. The adjustable tilting mechanism is designed with 360° revolving 12 14770.00 1,77,240.00

type, Single point control.- Front-pivot for tilt with feet resting on ground ensuring more comfort. Tilt tension adjustment & 4-position

locking with anti-shock feature. Seat/back tilting ratio of 1:2. The pneumatic height adjustment has an adjustment stroke of 10.0cnn.

The pedestal is nylon and fitted with 5 nos. twin wheel castors.The pedestal pitch centerdia is 66cm .Neckrest for high back

chair.The product should be SCS IAQ & AIOTA certified.The OEM should be ISO 9001:2015,ISO 14001:2015 & ISO 18001:2007

Digitally signed by AMIT

SINGH 20:48:16 IST

S No Item Specifications Size Qty Rate Amount Ref. Image

Supply of visitor chair of following specifications. The seat assembly shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood and

shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be 47.0 cm. (W) x

48.0 cm. (D). The back asembly shall be made of powder coated (DFT 40-60 microns) tubular frame of dia 2.54 ±0.03cm. x

17 Visitor chair 0.2±0.016cm thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net 36 7611.00 2,73,996.00

fabric with high tenacity yarn. The dimensions of back shall be 46.5 cm (W) x 60.5 cm (H). The HR polyurethane foam shall be

moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. C16

Grand Total 51,05,333.00

Grand Total 51,05,333.00

Digitally signed by AMIT

SINGH 20:48:16 IST

Schedule of Quantities: Dismantling

S No DSR 2021 Description Unit Qty. Rate DSR Amount Non DSR Amount

Demolishing cement concrete manually/ by mechanical means

1 15.2 including disposal of material within 50 metres lead as per

direction of Engineer-in-charge.

a 15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design cu m 20 1239.60 24792.00 0.00

Demolishing R.C.C. work manually/ by mechanical means

including stacking of steel bars and disposal of unserviceable

2 15.3 material within 50 metres lead as per direction of Engineer-in- cu m 5 2928.10 14640.50 0.00

Demolishing brick work manually/ by mechanical means

including stacking of serviceable material and disposal of

3 15.7 unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

Dismantling old plaster or skirting raking out joints and cleaning

4 15.56 the surface for plaster including disposal of rubbish to the sq m 75 45.05 3378.75 0.00

dumping ground within 50 metres lead.

Dismantling doors, windows and clerestory windows (steel or

5 15.12 wood) shutter including chowkhats, architrave, holdfasts etc.

complete and stacking within 50 metres lead :

a 15.12.1 Of area 3 sq. metres and below Each 27 302.70 8172.90 0.00

b 15.12.2 Of area beyond 3 sq. metres Each 22 414.55 9120.10 0.00

Dismantling tile work in floors and roofs laid in cement mortar

6 15.23 including stacking material within 50 metres lead.

a 15.23.2 For thickness of tiles above 25 mm and up to 40 mm sq m 900 93.40 84060.00 0.00

Dismantling stone slab flooring laid in cement mortar including

7 15.25 stacking of serviceable material and disposal of unserviceable sq m 48 219.75 10548.00 0.00

material within 50 metres lead.

Digitally signed by AMIT

SINGH 20:48:16 IST

S No DSR 2021 Description Unit Qty. Rate DSR Amount Non DSR Amount

Dismantling C.I. pipes including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical

8 15.45 means breaking lead caulked joints, melting of lead and

making into blocks including stacking of pipes & lead at site

within 50 metre lead as per direction of Engineer-in-charge:

b 15.45.2 Above 150 mm dia up to 300 mm dia Metre 42 448.15 18822.30 0.00

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous

9 15.52 China) including stacking of useful materials near the site and Each 22 744.60 16381.20 0.00

disposal of unserviceable materials within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows,

fixed glazing and false ceiling including disposal of

10 15.57 unserviceable material and stacking of serviceable material sq m 1325 46.50 61612.50 0.00

with in 50 meters lead as directed by Engineer-in-charge.

Demolishing R.C.C. work by mechanical means and stockpiling

at designated locations and disposal of dismantled materials up

11 15.58 to a lead of 1 kilometre, stacking serviceable and unserviceable cu m 2 2328.55 4657.10 0.00

material separately including cutting reinforcement bars.

Carriage of material by mechanical transport including

loading unloading and stacking

12 Lime, murrum, building rubbish

Grand Total 501385.75 0.00

Grand Total 501385.75 0.00

Digitally signed by AMIT

SINGH 20:48:16 IST

4th Floor Window work

Sr.no Description Unit Rate Qty. Amount

Providing and fixing factory made uPVC white colour

sliding glazed door comprising of uPVC multi-

chambered frame with in-built roller track and sash

extruded profiles duly reinforced with 1.60 ± 0.2 mm

thick galvanized mild steel section made from roll

forming process of required length (shape & size

according to uPVC profile), appropriate dimension

uPVC extruded glazing beads, uPVC extruded interlock

and uPVC extruded Inline sash adaptor (if required),

EPDM gasket, wool pile, zinc alloy (white powder

coated) handle with key on one side of extreme panels

along with zinc plated mild steel multi point locking

having transmission gear with keeps, zinc alloy (white

9.147F powder coated) cresent lock (if required), stainless

steel (SS 304 grade) body with adjustable double

nylon rollers (weight bearing capacity to be 120 kg),

G.I fasteners 100x8mm size for fixing frame to

finished wall and necessary stainless steel screws etc.

Profile of frame & sash shall be mitred cut and fusion

welded at all corners, including drilling of holes for

fixing hardware's and drainage of water etc. After

fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon

sealant over backer rod of required size and of

approved quality, all complete as per approved

drawing & direction of Engineer-in-Charge. (Single/

double glass panes, wire mesh and silicon sealant

Three paidthree

track separately).

panels sliding door with fly proof SS

wire mesh (Two nos glazed & one no wire mesh

panels) made of (big series) frame 116x45mm & sash

9.147F.4 46x82mm both having wall thickness of 2.3 ± 0.2 mm sq m 8766.85 19 166570.15

and single glazing bead/ double glazing bead of

appropriate dimension. (Area of door above 2.00 sqm

Providing and fixing double glazed hermetically sealed

glazing in aluminum windows, ventilators and partition

etc. with 6mm thick clear float glass both side, having

12mm air gap, including providing EPDM gasket,

21.10 perforated aluminum spacers, desiccants, sealant sq m 4013.35 19 76253.65

(Both primary and secondary sealant) etc. as per

specifications, drawings and direction of Engineer-in-

charge complete.

Total 242823.80

providing and fixing fly proof SS wire mesh for sliding

Window with(Area of door above 2.00 sqm upto 5.00

M.R sqm) etc. as per specifications, drawings and direction sq m 4660.00 19 88540

of Engineer-in-charge complete.

providing and fixing handles for sliding Window with)

M.R etc. as per specifications, drawings and direction of Nos 2350.00 6 14100

Engineer-in-charge complete.

Removing the existing window with aluminum frame

M.R and glass of direction of Engineer-in-charge complete. sq m 1340.00 19 25460

M.R Salvage value of existing window material LS 10000 -1 -10000

Total 118100.00

Digitally signed by AMIT

SINGH 20:48:16 IST

S. N. PARTICULAR QUANTITY

1 CUP BOARD 3

2 SIDE RACK 3

5 2 SEATER SOFA 1

6 WINDOW AC 2

7 WALL FAN UNAVAILABLE

8 HOT CASE UNAVAILABLE

1 WOODEN CHAIR 5

OFFICE CHAIR 5

2 MAIN TABLE 1

3 SIDE RACK 4

WALL FAN UNAVAILABLE

7 3 SEATER SOFA 1

8 1 SEATER SOFA 2

9 CENTRE TABLE 1

10 GREEN BOARD 1

2 WOODEN ALMIRAH 1

3 SIDE RACK 5

5 3 SEATER SOFA 1

6 1 SEATER SOFA 2

Digitally signed by AMIT

SINGH 20:48:16 IST

7 CENTRE TABLE 1

9 HOT CASE UNAVAILABLE

2 CUP BOARD 2

3 SIDE RACK 2

5 3 SEATER SOFA 1

6 1 SEATER SOFA 1

7 CENTRE TABLE 1

1 CUP BOARD 1

3 COMPUTER TABLE 5

4 SIDE RACK 3

5 1 SEATER SOFA 1

7 WALL FAN UNAVAILABLE

9 MIRROR UNAVAILABLE

Digitally signed by AMIT

SINGH 20:48:16 IST

2 WOODEN ALMIRAH 1

3 SIDE RACK 4

6 WALL FAN UNAVAILABLE

Digitally signed by AMIT

SINGH 20:48:16 IST

8 1 SEATER SOFA 2

9 3 SEATER SOFA 1

CENTRE TABLE (WITHOUT

1 CUP BOARD 2

4 SIDE RACK 1

5 MEETING TABLE 1

6 3 SEATER SOFA 1

7 1 SEATER SOFA 2

8 CENTRE TABLE 1

1 SIDE RACK 2

3 WINDOW AC 1

1 CUP BOARD 1

5 WINDOW AC 1

1 COMPUTER TABLE 2

Digitally signed by AMIT

SINGH 20:48:16 IST

3 STEEL ALMIRAH 1

5 WALL FAN UNAVAILABLE

7 MIRROR UNAVAILABLE

2 CUP BOARD 1

4 STEEL ALMIRAH UNAVAILABLE

6 CENTRE TABLE 1

7 2 SEATER SOFA 1

9 MIRROR UNAVAILABLE

1 CUP BOARD 1

3 SIDE RACK 1

4 3 SEATER SOFA 1

5 CENTRE TABLE 1

Digitally signed by AMIT

SINGH 20:48:16 IST

1 CUP BOARD 1

3 WINDOW AC 2

Digitally signed by AMIT

SINGH 20:48:16 IST

5 STEEL RACK UNAVAILABLE

7 SIDE RACK 1

8 COMPUTER TABLE 1

9 3 SEATER SOFA 1

10 1 SEATER SOFA 2

11 WALL FAN UNAVAILABLE

12 MIRROR UNAVAILABLE

1 CUP BOARD 2

2 COMPUTER TABLE 1

3 SIDE RACK 2

6 3 SEATER SOFA 1

7 1 SEATER SOFA 2

8 CENTRE TABLE 1

10 WALL FAN 1

1 CUP BOARD 3

2 COMPUTER TABLE 6

Digitally signed by AMIT

SINGH 20:48:16 IST

3 SIDE RACK 3

Digitally signed by AMIT

SINGH 20:48:16 IST

7 MIRROR UNAVAILABLE

1 CUP BOARD 3

2 COMPUTER TABLE 3

3 SIDE RACK 3

4 WALL FAN UNAVAILABLE

8 3 SEATER SOFA 1

9 1 SEATER SOFA 2

10 MIRROR UNAVAILABLE

11 CENTRE TABLE 1

2 COMPUTER TABLE 1

4 STEEL ALMIRAH 1

5 CUP BOARD 1

1 COMPUTER TABLE 1

2 CHAIR UNAVAILABLE

3 SIDE RACK 2

4 STEEL ALMIRAH 1

5 WINDOW AC 1

6 MIRROR UNAVAILABLE

Digitally signed by AMIT

SINGH 20:48:16 IST

3 SIDE RACK 1

4 3 SEATER SOFA 1

5 1 SEATER SOFA 1

6 CENTRE TABLE 1

7 MIRROR UNAVAILABLE

1 CUP BOARD 3

2 COMPUTER TABLE 1

4 SIDE RACK 2

6 3 SEATER SOFA 1

7 1 SEATER SOFA 2

8 CENTRE TABLE 1

10 SPLIT AC 2

2 COMPUTER TABLE 1

3 CUP BOARD 1

4 SIDE RACK 1

6 3 SEATER SOFA 1

Digitally signed by AMIT

SINGH 20:48:16 IST

7 1 SEATER SOFA 2

8 CENTRE TABLE 1

9 MIRROR UNAVAILABLE

10 WINDOW AC 1

1 CUP BOARD 4

2 COMPUTER TABLE 1

3 SIDE RACK 2

5 2 SEATER SOFA 1

6 CENTRE TABLE 1

7 WINDOW AC 1

8 WALL FAN UNAVAILABLE

9 MIRROR UNAVAILABLE

3 COMPUTER TABLE 1

4 SIDE RACK 3

5 CENTRE TABLE UNAVAILABLE

Digitally signed by AMIT

SINGH 20:48:16 IST

2 CUP BOARD 1

3 COMPUTER TABLE UNAVAILABLE

4 SIDE RACK UNAVAILABLE

6 3 SEATER SOFA 1

7 WALL FAN UNAVAILABLE

1 AQUA GUARD UNAVAILABLE

1 ROOM DOORS 30

2 ELECTRICAL WIRE L/S 50 KG

Digitally signed by AMIT

SINGH 20:48:16 IST

SCRAP VALUATION

PARTICULAR QTY VALUE (INR)

1 CUP BOARD 3 1,000

2 SIDE RACK 3 1,800

5 2 SEATER SOFA 1 1,000

6 WINDOW AC 2 3,500

7 WALL FAN UNAVAILABLE

8 HOT CASE UNAVAILABLE

1 WOODEN CHAIR 5 2,000

OFFICE CHAIR 5 1,500

MAIN TABLE 1 1,500

3 SIDE RACK 4 1,800

4 DINING TABLE 1 700

5 WALL FAN UNAVAILABLE

6 SPLIT AC 2 3,500

7 3 SEATER SOFA 1 2,000

8 1 SEATER SOFA 2 1,400

9 CENTRE TABLE 1 700

Digitally signed by AMIT

SINGH 20:48:16 IST

10 GREEN BOARD 1 200

2 WOODEN ALMIRAH 1 1,500

3 SIDE RACK 5 2,000

5 3 SEATER SOFA 1 2,000

6 1 SEATER SOFA 2 1,400

7 CENTRE TABLE 1 700

8 SPLIT AC 2 3,500

9 HOT CASE UNAVAILABLE

2 CUP BOARD 2 1,500

3 SIDE RACK 2 1,000

4 TABLE 1 800

5 3 SEATER SOFA 1 2,000

7 CENTRE TABLE 1 500

8 SPLIT AC 1 1,750

1 CUP BOARD 1 700

3 COMPUTER TABLE 5 3,500

Digitally signed by AMIT

SINGH 20:48:16 IST

4 SIDE RACK 3 1,500

5 1 SEATER SOFA 1 1,400

6 SPLIT AC 3 5,250

Digitally signed by AMIT

SINGH 20:48:16 IST

7 WALL FAN UNAVAILABLE

9 MIRROR UNAVAILABLE

2 WOODEN ALMIRAH 1 1,200

3 SIDE RACK 4 2,000

4 STOOL 1 200

5 SPLIT AC 2 3,500

6 WALL FAN UNAVAILABLE

8 1 SEATER SOFA 2 1,400

9 3 SEATER SOFA 1 2,000

10 CENTRE TABLE (WITHOUT GLASS) 1 500

1 CUP BOARD 2 1,500

2 TABLE 1 800

4 SIDE RACK 1 500

5 MEETING TABLE 1 1,500

6 3 SEATER SOFA 1 2,000

7 1 SEATER SOFA 2 1,400

8 CENTRE TABLE 1 700

9 SPLIT AC 2 3,500

1 SIDE RACK 2 800

Digitally signed by AMIT

SINGH 20:48:16 IST

3 WINDOW AC 1 1,750

1 CUP BOARD 1 500

3 STOOL 1 200

5 WINDOW AC 1 1,750

1 COMPUTER TABLE 2 1,200

2 TABLE 1 500

3 STEEL ALMIRAH 1 1,500

5 WALL FAN UNAVAILABLE

6 SPLIT AC 1 1,750

7 MIRROR UNAVAILABLE

1 TABLE 1 800

2 CUP BOARD 1 700

3 SIDE RACK 1 500

4 STEEL ALMIRAH UNAVAILABLE

6 CENTRE TABLE 1 700

7 2 SEATER SOFA 1 1,500

8 SPLIT AC 1 1,750

9 MIRROR UNAVAILABLE

Digitally signed by AMIT

SINGH 20:48:16 IST

1 CUP BOARD 1 800

3 SIDE RACK 1 500

4 3 SEATER SOFA 1 2,000

5 CENTRE TABLE 1 500

7 SPLIT AC 1 1,750

1 CUP BOARD 1 800

3 WINDOW AC 2 3,500

4 SPLIT AC 1 1,750

5 STEEL RACK UNAVAILABLE

7 SIDE RACK 1 500

Digitally signed by AMIT

SINGH 20:48:16 IST

8 COMPUTER TABLE 1 700

9 3 SEATER SOFA 1 2,000

10 1 SEATER SOFA 2 1,400

11 WALL FAN UNAVAILABLE

12 MIRROR UNAVAILABLE

1 CUP BOARD 2 1,500

2 COMPUTER TABLE 1 700

3 SIDE RACK 2 1,000

6 3 SEATER SOFA 1 2,000

Digitally signed by AMIT

SINGH 20:48:16 IST

7 1 SEATER SOFA 2 1,400

8 CENTRE TABLE 1 700

9 SPLIT AC 2 3,500

10 WALL FAN 1 450

1 CUP BOARD 3 2,000

2 COMPUTER TABLE 6 3,500

3 SIDE RACK 3 1,500

5 WALL FAN 2 900

6 SPLIT AC 2 3,500

7 MIRROR UNAVAILABLE

1 CUP BOARD 3 2,500

2 COMPUTER TABLE 3 1,800

3 SIDE RACK 3 1,500

4 WALL FAN UNAVAILABLE

5 SPLIT AC 2 3,500

8 3 SEATER SOFA 1 2,000

9 1 SEATER SOFA 2 700

10 MIRROR UNAVAILABLE

11 CENTRE TABLE 1 600

2 COMPUTER TABLE 1 800

Digitally signed by AMIT

SINGH 20:48:16 IST

4 STEEL ALMIRAH 1 1,500

5 CUP BOARD 1 700

6 SPLIT AC 1 1,750

1 COMPUTER TABLE 1 500

2 CHAIR UNAVAILABLE

3 SIDE RACK 2 500

4 STEEL ALMIRAH 1 2,000

5 WINDOW AC 1 1,750

6 MIRROR UNAVAILABLE

3 SIDE RACK 1 500

4 3 SEATER SOFA 1 2,000

5 1 SEATER SOFA 1 700

6 CENTRE TABLE 1 600

7 MIRROR UNAVAILABLE

8 SPLIT AC 1 1,750

1 CUP BOARD 3 2,100

2 COMPUTER TABLE 1 800

4 SIDE RACK 2 1,200

6 3 SEATER SOFA 1 2,000

7 1 SEATER SOFA 2 2,800

8 CENTRE TABLE 1 800 signed by AMIT

SINGH 20:48:16 IST

WALL FAN 1 450

10 SPLIT AC 2 3,500

2 COMPUTER TABLE 1 600

3 CUP BOARD 1 1,000

4 SIDE RACK 1 500

3 SEATER SOFA 1 2,000

7 1 SEATER SOFA 2 1,400

8 CENTRE TABLE 1 600

9 MIRROR UNAVAILABLE

10 WINDOW AC 1 1,750

COMPUTER TABLE 1 600

3 SIDE RACK 2 1,000

5 2 SEATER SOFA 1 1,500

CENTRE TABLE 1 800

7 WINDOW AC 1 1,750

8 WALL FAN UNAVAILABLE

9 MIRROR UNAVAILABLE

1 TABLE 1 800

Digitally signed by AMIT

SINGH 20:48:16 IST

2 CHAIR 2 700

3 COMPUTER TABLE 1 500

4 SIDE RACK 3 1,500

5 CENTRE TABLE UNAVAILABLE

6 SPLIT AC 1 1,750

1 TABLE 1 800

2 CUP BOARD 1 1,000

3 COMPUTER TABLE UNAVAILABLE

4 SIDE RACK UNAVAILABLE

6 3 SEATER SOFA 1 2,000

7 WALL FAN UNAVAILABLE

8 SPLIT AC 1 1,750

1 AQUA GUARD UNAVAILABLE

1 ROOM DOORS 30 9,000

2 ELECTRICAL WIRE L/S 50 KG 1,000

TOTAL SCRAP VALUE 285,000

Digitally signed by AMIT

SINGH 20:48:16 IST