Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC | L1 | Accepted-AOC Lowest bid. | |
| 2 | L2₹23.4 L+₹85,805 (3.81%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹24.2 L+₹1.7 L (7.62%)Rejected-Finance 451 NEAR RADHA KRISHAN MANDIR VPO MAMUN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-Finance Other than lowest bid. |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
6 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH MAMUN
GE SOUTH MAMUN PATHANKOT-145001
ADDN/ ALTN TO CUPBOARDS OF BLDG NOS NP -1 TO NP-06 OF AN AD REGT AT MAMUN MIL STN UNDER GE (S) MAMUN
2023_MES_628713_2
GE(S)/M-55/2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
GE SOUTH MAMUN
AS PER NIT
8 documents required · 8 mandatory
₹500
GE SOUTH MAMUN
₹54,000
Yes
2 Mar 2024
16 Jan 2024
13 Feb 2024
16 Jan 2024
6 Feb 2024
23 Jan 2024
Amount
Taking down cement plaster on brick walls or stone walls or concrete surface of any description etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall, applying 2mm thick wall care putty and making the surface even & smooth and applying two coats of oil bound distemper complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall, applying 2mm thick wall care putty and making the surface even & smooth and applying two coats of oil bound distemper complete all as specified and directed.
Taking down old unserviceable wooden cupboard of area exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.
M & L for steel almirah bed side locker made of mild steel sheet 1 mm thick all joints welding and fixing with wall, with two coats of synthetic enamel paint all as specified and directed as shown on drawing. Note :- size shall be 760mm, long, 440mm wide and 1270mm high. The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top sides, back, bottom and Front of almirah shall be of 1 mm thick mild steel. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet. Front shutters shall have two leaves. A steel chromium plated handle 100mm long shall be provided to the shutter. A threeway locking device shall be provided to front shutters. Each leaf of front shutter shall be hinged with two numbers butt hinges 75mm long and shutters shall be side hung. All joints and welding, fixing shall be done in accordance with standard workmanship. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of red oxide primer after preparation of steel surfaces synthetic. Painting shall be done with spray machine. Rest all as shown on drawings complete all as specified and directed.
M&L for steel screw bolt with hexagonal or sqaure heads at one end and screwed the other or screwed both ends, each screwd end to be fitted with washers and one hexagonal or squae nut all as spd and directed
M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, surface finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, haunching, benching, kerbs, mud stops, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
M&L for brick work using fly ash bricks, old size bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in beams, cantilevers, bressumers, lintels, shelves complete all as specified and directed.
M/S NARESH KUMAR SHARMA
RD Engineers
Bidder Name
RD Engineers
M/S TARA CHAND CONSTRUCTION CO.
M/S NARESH KUMAR SHARMA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .