REPAIR TO TOILET KITCHEN AND BATHROOM IN DOMESTIC AREA AT DAPPAR

Amount

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for cement plastering 5mm thick in cement mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plastering 15mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for prep of newly plastered surface applying two coat of OBD over one coat of primer (light shade)by using roller/brush over a coat of 1.5 mm thick wall care putty , complete all as specified and directed.

M&L for preparation of newely plaster surfaces of ceiling and applying three coats of white wash complete all as specified.

M & L for preparation of newely plasterd surfaces of external walls applying two coat of cement base paint over a coat of primer complete all as specified & as directed by Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises

M & L for joint free non-Skid whilte ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge

M&L Non skid coloured Ceramic tiles 7 to 8mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, as in skirting, over 10mm thick plaster CM (1:3) complete all as specified.set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified.

M&L for glazed ceramic white tiles in vertical surfaces such as skirting,dados and riser to steps etc size450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over including 10mm thick plaster CM (1:4) complete all as specified.

Dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors aprons etc

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border and the like works and flooring etc, 15-16 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified.

S&F in repairs vitreous china wash hand basin white flat back of size 630x450mm including brackets including waste pipe etc complete all as specified and directed by Enge-in-Charge.

S&F in repairs 32mm Waste pipe fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down shutters exc 1 Sqm and n exc exceeding 2.0 Sq. each complete all as specified and directed.

S&F 35mm thick glazed and skelton shutters 2nd class hard wood , open rebated and prepared to receive glass , gauze Ec ( without sash bars), edges of framing plain , chamferd or rounded. Fitted with cut and mitre beads for securing glass etc.; sizes of members of shutters as specified in ssr part 1 , secton 8 , clause 8.24 (a) ; supplied and fitted to chowkhats complete all as specified and directed.

S&F factory made flush shutters 30 mm thick solid core construction , with block board core and plywood face panels , commercial type on both sides complete all as specified and directed.

S & F anodised aluminum frame for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. including powder coating to minimum thickness of powder coating 50 micron complete all as specified and directed by Engr-in-charge.

S&F anodised aluminum window and ventilators shutters , fixed type without sash bars , aluminium section , weighimg 0.55kg/m including necessary joining cleats , glazing clips, rubber packing , anodised aluminium snap beading , screws etc complete all as specified.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 150mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge

S&F 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge

S&F Galvanised mild steel wire cloth thickness 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty/screws/nails in squares not exc 0.5 Sqm in each pane complete all as specified and directed including hacking out old glass.

S&F in repair 3.0 mm thick figured glass , pinched type or with oil putty/screws/nails in squares n exc 0.5 sq.m each pane completely as specified and directed by Engr-in- charge.

S & F 150mm Aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium, alloy and fixed complete all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue and 150 mm overall length of cover plate, anodised, with hard drawn steel spring , fixed in floor

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed complete all as specified and directed.

S&F in repairs 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed complete all as specified and directed.

M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair 15mm Bib tap standard of PTMT white colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified.

Taking up or down existing steel tubing and connections, 15mm bore complete all as directed and specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Refixing 15mm bore GI steel water tubing medium grade fixed to walls complete all as specified.

Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified.

Demolition in cement concrete (unreinforced) in ground floors and paving not exc 15 cm thickness (below or above ground level)

M&L Plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded aggregate) as in filling of sunken portion complete all as specified and directed.

M & L 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, toweled to even and smooth finish without using extra cement complete all as specified directed.

M & L priming surfaces and applying normal tratment ( for moderate conditions) using glass fibre base bitumen felt grade 2 completely and directed by Engr in charge

Material and labour for providing 3 mm thick APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric ( wt. not less than 150 gms/sqm ) land on primed surface by forced application complete all as specified and directed by Engr-in-charge

S&F 25 mm dia GI pipe medium grade (spouts) tubes galvanised with all fittings complete all as specified and directed.

S&F in repairs vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including provn of lime concrete bedding and taking down existing of any description/size includeing 600mm long body P trap fixed with IWC complete in all respect all as specified.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe in repair completed all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including jet spray complete in all respect all as specified.

S&F10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified.

PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction,including all fitting elbow, tees, sockets, bends etc. laid in walls & floors for connecting bottle traps & nahani trap complete all as specified.

M&L cast iron nahani/floor/multifloor trap 100 mm dia including jointing with solvent cement in repair fixed in cement concrete (1:2:4) type B1complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe,100mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls/laid in floors and making necessary connections, fixed as in repair complete all as specified and directed.

S&F CI Bends (any radius), for 100mm bore CI piipes diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified.

S&F cast iron junction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified.

M&L fixed in repair cast iron cowls of 100 mm dia complete all as specified and directed.

S&F in repair CI gully traps, Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' fixed in repair complete all as directed and specified.

S&F in repair stainless steel sink with drainage board, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460 with bowl size 410x 330 x 160 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair overhead shower 125mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified approved by AGE(I)

M&L in repair for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed.

S&F in repair Sink Cock wall mounted with swinging spout and with wall flange and swan neck, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified.

M&L plain fillets as in 2nd class hard wood square rectangular in section wrought secured with screws sectional area exc 6 but n. exc 13 Sqcm. Complete all as specified and directed.

M&L Prelaminated particle board,18/19 mm thcik both side interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F Piano/continuous hinge of size 40 mm (when open) stainless steel complete all as specified.

S&F harrision rail stainless steel tubing of 25 mm dia chromium plated 1.6 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets fency type, stops etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F 125mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repair CP waste coupling/round strainer of 110mm dia to kitchen sink and making good with white cement disturbed portion complete all as specified and as directed.

M/S Mahal Enterprises (BID ID -3170328)

S M BUILDERS (BID ID -3170828)

M/s Guddu Builders (BID ID -3170923)

power house batteries (BID ID -3166859)

HEMANT SURI (BID ID -3166385)