Provisions of internal and external electrifications to Arulmigu Vijaya Varadaraja Perumal Temple, Baburayanpettai, Maduranthakam Taluk, Chengalpattu District.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable Powder coated MS duct with door arrangements on wall and ceiling with accessories with Module GI switch box on wall with wall with 6A one way module switch with module front plate for Open MS duct Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Supply and fixing of 4' 20W single LED fitting with LED complete on wall or ceiling with TW round blocks with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of 18W LED square type fitting with LED (Higher end) on Ceiling with suitable support from ceiling with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of fancy glass shade and 7W 9W LED Bulb

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm Gl bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.

Supply and fixing of 30W LED focus fitting complete on suitable MS angle with suitable MS clamp. (For Urchavar and Guru Bhagavan sannadhi outer)

Supply and fixing of 100W LED Focus / Flood light fitting complete with 1" dia Gl pipe supports between the walls with suitable MS clamps. painting and electrical connections complete.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 450mm 18" Wall Fan (Air Circulator) with Pillar Clamp 1½ x ½ MS flat with bolt and nuts for fixing the Fan on pillar with necessary connection. (Higher end-like Almonard/equivalent)

Supply and run of 50mm x 38mm raceways powder coated duct with cover arrangements complete with MS angle and bolt & nuts complete.

Supply and run of MS flat with nitrle rubber insulation for clamps of size 2' x 1' on pillar with suitable Bolt/nuts and painting of suitable colour.

Supply and fixing of sintex box (SMC) with I no 6-32A SP MCB. 16A bakelite connecter on a hylem sheet ith inter connections complete (For street light lights focus flood lights)

Supply and fixing of 2 nos.6A two module 5 pin socket, 2 nos. 6A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End (Set plug)

Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall land ceiling or in existing duct with continuous earth wire connection of 2.5 sq mm Copper wire with painting of suitable colour.

Supply and run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe in existing duct or on wall with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour

supply and fixing of 65 mm dia. (2-1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of I nos of 80W LED street light fitting with LED (Higher end) with 1 metre 40mm dia. Gl pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour.

Supply and Laying of 4 x 16 sq mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good

Supply and clamping of 4 x 16 sqmm PVC armoured LTUG cable on wall with earth connection.

Supply and fixing of brass cable gland for 4x16 sqmm PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3 1/2x 25 sq.mm PVC LTUG-armoured Alu cable on post or on wali with MS Clamps.

Supply and fixing of brass cable gland for 3 1/2 x 25 sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3 1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Laying of 2 * 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 2 * 10 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 2 * 10 sq.mm PVC armoured LTUG cable with earth connection.

Supply and Fixing of 32A DP MCB in sheet steel enclosure boy with electrical connections complete. For street light control

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply Erection Testing and commissioning of Three compartment LTCT meter box made up of 16 SWG CRCA sheet steel (Length 1200mm x Height 1200mm x width 600mm) with door and lock & key arrangements on suitable angle iron frame support for floor / wall mounting support with supply and fixing of the following interior mounting arrangements with busbar chamber. meter chamber and Terminal box chamber confirming to IE rules

Supply and erection of 1 No. 250 Amps floor mounted cubical panel board fabrication out of 14 SWG sheet steel, dust and vermin proof. suitable for operation on 440V, 3 phases, 50Hz AC supply with bus bar chamber comprising of 4Nos. 1" x 1/4 copper flats for RYB and neutral with 2 Nos. 1" x 1/8 copper flat for earth bus to be provided at the cubical. The following cubical TPN switel with fuse and neutral link. 250A FP MCCB-Ino's (L&T/Siemens) as incoming and 125 A TPN MCCB -9no's (L&T/Siemens) Multifunction meter Ino The main switches to be interconnected with, the bus bar with suitable rigid tinned Copper with necessary hylem sheet separators between bus bars, main switch etc and with double earth connection of the main switches. The panel board to be painted powder coating with stencil marking of the main switches etc with name, capacity, cable size etc., (Panel)

Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. [SD 6641 673

Supply and clamping of 3 1/2 x 120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and fixing of 250A (500V) three phase meter box fabricated with 16 SWG CRCA Sheet comprising of with 3 nos. of 300A fuse units. 1 no. 250 TPN switch with provision for fixing TNEB meter with inter connections and with required accessories on wall complete

Supply and fixing of 250 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor ground for earth connection

Sub Total

Please Enable Macros to View BoQ information