REPAIR TO JOINERY, PLUMBING WORK, FLOORING, PATHWAYS, HARDSTANDING INCLUDING PERIODICAL SERVICES AND OTHER MISC WORKS IN RR UNITS AT KISTWAR, BHANDARKOT AND DUL AREA OF HQ 9 SECTOR UNDER GE (I) 873 EWS

Amount

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposal of unserviceable material, debris and rubbish to a distance not exc. 100m, complete all as specified and as directed.

100mm thick plain cement concrete 1:4:8 type D-2 (40mm graded crushed aggregate) as in sub base, finishing surface even & fair, complete all as specified and directed

50mm thick plain cement concrete 1:2:4 type B-1 (20mm graded crushed aggregate) as in hardstanding/ path, finishing surface even & smooth without using extra cement including use and waste of formwork to divide the area into panels, complete all as specified and directed

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in subbase of floor all as specified and directed by Engr –in Charge

Factory made (rectified) precast concrete rubber moulded designer chequered tiles any colour, shape and size not less then 200mm x 200mm x 25mm thickness (compressive strength not less than 250 Kg/Sqm), pointed with grey cement and pigment over and including 20mm thick CM 1:4 screed bed or bedding layer complete.

75 mm thick plain cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of bitumen 85/25 grade and three part of sand by weight all as specified and directed.

Machine pressed precast concrete interlocking paver block any shape and size as approved by GE confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning, complete all as specified.

25 mm thick plain cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in sub base,complete all as specified and as directed.

Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified.

Black marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified.

Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, size of each slab not be less than 0.28 Square metre, including rubbing and mirror polishing complete over and including 20mm thick screed bed in CM 1:4, complete all as specified.

Taking down cement plaster or cement lime plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Framed work such as grills, grating etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barreD iron doors, ladders, balusters, walkway, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Square metre each including taking out hold fast complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5sqm but not exceeding 4.0 Square metre each including taking out hold fast complete all as specified and directed.

Taking down shutters of any description exceeding 1Square metre and not exceeding 2Square metre each, complete all as specified and directed.

30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Factory made Glazed and skelton shutters 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24 (a) kiln seasoned and pressure treated all as specified.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixed complete alll as specified and shown in relevant drg

Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) all as directed by Engineer-in-Charge.

Extruded aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section of size 200mm ISI marked and fixed, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 250mm long, complete all as specified.

Mild steel butt hinges, medium weight, cold rolled (ISI marked), 100mm long, complete all as specified.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100mm long, complete all as specified.

Aluminium powder coated window with three track window frame with sliding shutters, two shutter with 4mm thick tinted glass and one shutter with stainless steel wire mesh 0.36 nominal dia and width of aperture 1.40mm, fixed with rubber gasket and aluminium beading, clips with all fittings with and including duco pattern grill of size 75mm x 75mm fixed as per manufacturer instructions including making good disturbed surfaces of wall to match with existing, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete, all as specified and directed.

3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete, all as specified and directed.

Stainless steel wire mesh 0.36 nominal dia and width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified.

Stainless steel wire mesh 0.36 nominal dia and width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples, fixed in repair, complete all as specified.

Supply and fxing in repair decorative curtain rod 25 mm dia MS pipe, covered with coloured PVC layer, with and including decorative ends complete all as specified.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

Fixing only 15mm dia GI steel water tubing ,medium grade, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

15mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

Fixing only 20mm dia GI steel water tubing ,medium grade, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

20mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 2 1 0 g m s), high pressure with polyethelyne float and fly nuts including dismantling of existing water tank, complete all as specified and directed.

Bib taps long body 15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, fixed in repairs complete all as specified and directed.

Stop valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed.complete all as specified.

Pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed shank and fly nuts screwed for iron pipe complete for 15mm bore pipe, fixed in repairs all as specified & directed

Brass CP wash basin mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore and fixed in repair, complete all as specified.

Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore and fixed in repair, complete all as specified.

20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

PVC connection 15mm size with length 600mm with PTMT nuts fixed in repair, complete all as specified and directed.

Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(minimum weight 300gms), fixed in repair complete all as specified and directed.

Soap dish chromium plated cast type and fixed including plugs with chromium plated brass screws fixed in repairs complete all as specified and directed.

Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified and directed.

Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling including cutting for and pinning in ends of brackets or erecting stand etc., fixed in repair complete all as specified and directed.

Vitreous china Wash hand basin, superior quality oval type, 550x400mm size fitted in and including 20-25mm thick polished granite top over RCC (M-20 nominal mix) slab of size 750mm x 600mm, 50mm thick including necessary formwok with and including waste coupling150mm long and suitable bottle trap fixed in repair complete all as specified and directed.

Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) incl provision of cement concrte bedding, CI 'P' trap 100mm dia, connection to trap and fushing pipe, anti syphonage fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white, complete incl flushing pipe, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete fixed in repairs complete all as specified and directed.

Vitreous china urinals, bowl type of size 430 x 370 x 340mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified.

PVC valve less syphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints fixed in repairs complete all as specified and directed.

Water jet for EWC chromium plated with PVC connection, fixed in repairs, complete all as specified and as directed.

Health Faucet, ABS body with 1 metre SS braided connection pipe for 15 mm bore pipe, fixed in repairs complete all as specified and directed.

PVC cabinet mirror of size 350mm x 450mm fixed with steel screws and rawl plugs fixed in repairs, complete all as specified and directed.

Stainless steel sink 1mm thick for kitchen or laboratory wih plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm fixed in repairs, complete all as specified.

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in trenches/ floors, fixed in repair, complete all as specified and directed.

PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in trenches/ floors/ fixed to wall, fixed in repair, complete all as specified and directed.

PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified.

PVC (SWR) bends any radius 110mm bore, complete all as specified.

PVC (SWR) bends any radius 75mm bore complete all as specified.

Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of cement base paint over a coat of alkali resistant primer, complete as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats cement base paint of approved brand all as specified and as directed .

Preparation of old plastered or unplastered wall surfaces including washing, scrubbing down and stopping of distermperd surfaces and applying one coat of oil bound distemper, complete all as specified

One coat of synthetic enamel paint including preparation on old painted wooden or wood base surface of any description, not otherwise described over 10cm width or girth, complete, all as specified and directed

Two coat of synthetic enamel paint over a coat of pink primer on new wooden surface of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete, all as specified.

Preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint , complete all as specified.

Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint in camouflage pattern, complete all as specified.

Cleaning and removing all scale and dirt, etc, from tank of capacity 250 - 500 ltr and from mouths of circulating pipes, etc. and writing the item “ Tank cleaning on ---- including the date, month and year of the cleaning on External wall of tanks with synthetic enamel paint all as specified and directed by Engr –in Charge

Cleaning and removing all scale and dirt, etc, from tank of capacity 500 - 1000 ltr and from mouths of circulating pipes, etc. and writing the item “ Tank cleaning on ---- including the date, month and year of the cleaning on External wall of tanks with synthetic enamel paint all as specified and directed by Engr –in Charge

20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight - 210 gms), fixed in repair, complete all as specified and directed.

M/S Girdhari Lal Parihar

Bidder Name

M/S KOTWAL CONSTRUCTIONS

M/S Girdhari Lal Parihar