Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance RZ 151 BLOCK Y NEW ROSHANPURA PAPRAWAT ROAD NAJAFGARH SOUTH WEST DELHI DELHI 110043 | WEST DELHI | DELHI | 110043 | Admitted-Finance |
Tender Value
₹1.8 L
EMD Value
₹3,564
Closing Date
22 Dec 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer (Civil Division-III)
Room No- MZ-137, Main Building, IIT Delhi, Hauz Khas, New Delhi-110016
Extension of IRD section at mezzanine floor in academic area at IIT Delhi.
2022_IIT_727774_1
IITD/WORKS(SP-4037)/2022
Open Tender
Miscellaneous Works
Works
10 days
Indian Institute of Technology Delhi
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Registrar IIT Delhi
₹3,564
28 Dec 2022
7 Dec 2022
23 Dec 2022
7 Dec 2022
22 Dec 2022
7 Dec 2022
Amount
1) Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
1.1) 1.0 mm thick
2) Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
2.1) Hot finished welded type tubes
3) Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
4) Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
4.1) Size of Tile 600x600 mm
5) Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :
5.1) GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.
6) Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
6.1) Water thinnable cement primer
7) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
8) Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.
8.1) Two coats
9) Providing and fixing self adhesive frosted/decorative film on glass partition and glass door and windows of approoved design and make all complete as per direction of Engineer-in-charge.
10) Providing and fixing 12 mm thick frameless toughened glass in partition of approved brand and manufacture, including making necessary holes etc for fixing the fittings but excluding the cost of fittings all complete as per direction of Engineer-in-charge.
11) Providing and fixing Stainless door lock of Ozone make (Model-OPL-1)/Dorma / Hettich for glass door to be fixed at bottom of door i/c necessary cutting and making good the floor etc complete.
12) Providing and fixing wall to Glass connector of Ozone make (OGC-4A) /Dorma / Hettich Complete as per Direction of Engineer-in-charge
13) Providing and fixing Over Pannel Fitting of Ozone make (MODEL-OPF-1)/Dorma / Hettich Complete as per Direction of Engineer-in-charge.
14) Providing and fixing Over Pannel Fitting of Ozone make (MODEL-OPF-2) or Equivalent Complete as per Direction of Engineer-in-charge.
15) Providing and fixing top Pivot of Ozone make (MODEL-OFS-ACC-GDP) or Equivalent Complete as per Direction of Engineer-in-charge.
16) Providing and fixing Floor spring of Ozone make (MODEL FS-9000) or Equivalent Complete as per Direction of Engineer-in-charge.
17) Providing and fixing G.I. powder coated U shape Chanel & wall Angle in top For supporting the Toughened Glass as per direction of Engineering-charge.
18) Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). 8mm thick commercial ply conforming to IS : 1328 BWR type
M/S BINDRA AND SONS
MODERN CONCEPT CONSTRUCTIONS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .