Andaman Nicobar

Active

Works

Civil Works - Buildings

Renovation of 23 Classroom of Govt. Middle School Billiground under Sub Division No.III, Swadesh Nagar, NACD, APWD, Mayabunder including IEI

Chief Engineer Andaman Public Works Department (APWD)

EE, NACD, APWD, Mayabunder | North And Middle Andaman, Andaman And Nicobar Islands

Amount: ₹1.3 CrCloses: 5 Oct 2026

Timeline

Published24 Sept 2026
Submission Opens30 Sept 2026
Pre-Bid Meeting30 Sept 2026
Closes5 Oct 2026
Bid Opening5 Oct 2026

Tender Value

₹1.3 Cr

EMD Value

₹2.6 L

Closing Date

5 Oct 2026, 3:00 pm

Tender Inviting Organisation

Name

EE, NACD, APWD, Mayabunder

Address

EE, NACD, APWD, Mayabunder

Work Description

Renovation of 23 Classroom of Govt. Middle School Billiground under Sub Division No.III, Swadesh Nagar, NACD, APWD, Mayabunder including IEI

Tender Information

Tender ID

2026_APWD_24795_1

Reference Number

NIT No. 12/SE/CC-I/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Percentage

Period of Work

180 days

Location

EE, NACD, APWD, Mayabunder

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredCopy of EMD (.pdf)

RequiredCertificate of Work Experience (.pdf)

RequiredAffidavit as per clause 1.2.1 of CPWD 6 on Indian Non-Judicial Bond/Stamp paper. (.pdf)

RequiredCertificate of Registration for GST (Good Service Tax) (.pdf)

RequiredFinancial progress as per Form C- 3 at page No. 48 (.pdf)

RequiredUndertaking as per Sl. No. 1.2.2 (.pdf)

Required10 (Ten) years Financial Audited Statement of Account from a Chartered Accountant at page No. 49 (.pdf)

Finance

RequiredTender document (.pdf)

Requiredboq (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹2.6 L

Pre-Bid Meeting

Meeting Place

Conference Hall of SEs Office

Important Dates

Last Activity

24 Sept 2026

Published

24 Sept 2026

Bid Opening

5 Oct 2026

Download Starts

24 Sept 2026

Download Ends

5 Oct 2026

Submission Starts

30 Sept 2026

Pre-Bid Meeting

30 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (73 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1.01	1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources).	7.41	cum	11,072.48	₹82,047.08
2	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth.	66.2	cum	1,137.35	₹75,292.57
3Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
3.01	Fixed to openings /wooden frames with rawl plugs screws etc.	198	kg	361.79	₹71,634.42
4	Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)	120	each	347.37	₹41,684.4
5Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
5.01	300x16 mm	20	each	460.3	₹9,206
6Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
6.01	200x10 mm	20	each	151.33	₹3,026.6

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.65 MB

Work Item Documents

Tenderdocument.pdf

Tender Documents • 2.58 MB

BOQ_26243.xls

BOQ • 0.48 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1.01	1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources).	7.41	cum	11,072.48	₹82,047.08
2	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth.	66.2	cum	1,137.35	₹75,292.57
3Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
3.01	Fixed to openings /wooden frames with rawl plugs screws etc.	198	kg	361.79	₹71,634.42
4	Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)	120	each	347.37	₹41,684.4
5Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
5.01	300x16 mm	20	each	460.3	₹9,206
6Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
6.01	200x10 mm	20	each	151.33	₹3,026.6

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1.01

1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources).

7.41

cum

11,072.48

₹82,047.08

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling & dressing & finishing the top smooth.

66.2

cum

1,137.35

₹75,292.57

3Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

3.01

Fixed to openings /wooden frames with rawl plugs screws etc.

198

361.79

₹71,634.42

Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

120

each

347.37

₹41,684.4

5Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

5.01

300x16 mm

each

460.3

₹9,206

6Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

6.01

200x10 mm

each

151.33

₹3,026.6