Supply, Installation, Testing, and Commissioning (SITC) of 33 kV Transmission Line and 2x3.15 MVA PSS for providing power supply to Kurki Industrial Estate, under Electrical Section, Harirajpur, Khordha

Amount

Part A- Supply and Laying of 33kV, 3C 400sqmm U/G Cable for line length of 0.6 CKM without spare run (Refer SLD)(To be executed by Party and maintained by TPCODL under 6% deposit scheme)

Supply of materials for 33kV, 3Core, 400sqmm Aluminium, XLPE insulation UG Cable ( without spare cable) with accessories

Length of 33kV 3C, 400sqmm cable (open trench)

Supply of 33kV 3Core 400sqmm Aluminium, XLPE insulation UG Cable (SC rating of cable in kA- 37.7kA and SC rating of Armour in kA-20kA). Complete in all respect as per the Technical specification and direction of EIC.

Supply of Outdoor end termination kits Heat Shrinkable type suitable for 33kV, 3Core, 400sqmm, HT UG Cable kits Complete in all respect as per the Technical specification and direction of EIC.

Supply of materials for High Density Polyethelene (HDPE) pipe 160mm diameter, PE 80- PN8 for laying of 33kV UG cable. Complete in all respect as per the specification and direction of EIC.

Part A- Erection, Commissioning & Testing of 33kV new line by 3Core, 400sqmm, XLPE UG cable with spare

Laying, Commissioning & Testing of 33kV, 3Core, 400sqmm XLPE insulation (extruted type) UG cable with spare by open trench method. Complete in all respect as per the specification and direction of EIC.

Erection of Outdoor end termination kits Heat Shrinkable type suitable for 33kV, 3Core, 400sgmm, HT UG cable kits. Complete in all respect as per the specification and direction of EIC.

Laying of 160mm dia PE 80-PN8, HDPE pipe inside open trench. Complete in all respect as per the specification and direction of EIC.

Part A- Civil works with supply of all materials like cement, MS tor rod, brick, coarse & fine aggregates and labour, T&P, etc for UG Cable Trench

Earth work excavation of soil (1mtr. width X 1.2mtr.depth) Route Length .Complete in all respect as per the specification and direction of EIC.

Earth work excavation of soil. Complete in all respect as per the specification and direction of EIC.

Earth work excavation of hard rock. Complete in all respect as per the specification and direction of EIC.

Back filling with excavated soil outside and above the trench. Complete in all respect as per the specification and direction of EIC.

Supply and erection of GI Pipe of dia. 150mm, Class-B (8Mtr.). Complete in all respect as per the specification and direction of EIC.

Supply and Erection of Cable Route Marker along the cable route at an interval of 30mtrs with civil works.Complete in all respect as per the specification and direction of EIC.

Part B-Construction of 33/11 KV Primary Substation with 2X3.15 MVA Trf.,including complete Control Room Building and All Equipment Supply, Erection, Commissioning, Testing, Civil Works with supply of all materials, Labour, T&P etc. As per technical specification and scope of work

36kV Indoor AIS/SIS Equipment and accessories Jo 33/11kV AlS Substation as detailed below

Supply of 33kV Incoming Line Feeder Indoor AIS Panel consisting of 36kV VCB Breaker (2 no.s), Transformer Indoor AIS Panel (2 no.s), 33kV Bus coupler Indoor AIS Panel (1 no.) and 2 nos PT panel- Total 7No's Switch panel board CTR 800-400/5-5 for Incoming & Bus-coupler, 600-300/5-5-5 for Transformer. Bus Bar size 1250Amp Cu. Each Breaker Rating is 1250Amp & Draw out type. The module shall be provided with complete Feeder & Transformer Feeder protection system to suit for SCADA (BCPU, Numerical Differential Relay having inbuilt of REF protection, Multi-function Meter & other provisions as per tech spec).Energy meter shall be provided on each Incoming & outgoing breakers. Complete in all respect as per the Technical specification and direction of EIC.

Lighting Arrester

Supply of 30kV,10kA, Metal Oxide Class-2 (Station Class), Surge Arrester (for 33kV Incoming Line, HT side of 2nos. Power Transformers and 33/0.433kV Station Transformer) -Outdoor Type with Surge Counter.Complete in all respect as per the Technical specification and direction of EIC.

Supply of 12kV,10kA, Metal Oxide, Class-2 (Station Class), Surge Arrester with out surge counter( For Transformers)-outdoor type.Complete in all respect as per the Technical specification and direction of EIC.

11kV Equipment (Indoor Type)

Supply of 11kV Indoor Air Insulated switchgear Panel consisting of Breaker- 1250A, Busbar- 1250A(Copper) & CT (1200-600/5-5-5A) of 2 Nos. for Transformer Protection, Air Insulated switchgear Panel consisting of Breaker-630A Busbar-1250A (Copper) CT (600-300/5-5A) of 4 Nos. for Feeder protection, 1 No.of 11kV Bus-Coupler Indoor AIS Panel consisting of Breaker-1250A, Bus-bar- 1250A (Copper), Relay,CT (1200-600/5-5A), 2 Nos. 11kV, 2 Core, Single Phase, IVT (11/√3 kV / 110/√3-110/√3V), 3nos in a set, in a separate draw out chamber with Digital Voltmeter inside Control Room separately for Bus-1 & Bus-2 plug in type with disconnector. Relays to be installed on the panel, Multi-function Meter to be installed above the panel, Energy meter to be installed on the panel,as per technical specification and scope of work.

SCADA

Supply of Pre-Wired RTU Panel.Complete in all respect as per the technical specification and direction of EIC.

Supply of Managed Laver2 Ethernet Switch (RTU Panel) .Complete in all respect as per the technical specification and direction of EIC.

Supply of Networking Accessories. Complete in all respect as per the technical specification and direction of EIC.

Supply of Signal Interface Panel (4G Modem cum Router).Complete in all respect as per the technical specification and direction of EIC.

Supply of CMR with Mounting Base for Digital Inputs.Complete in all respect as per the technical specification and direction of EIC.

Supply of Interposing Relay for Digital Output.Complete in all respect as per the technical specification and direction of EIC.

Supply of Instrumentation Cable 12 C X 0.5 mm2, Armored cable for Status and Indications.Complete in all respect as per the technical specification and direction of EIC.

Supply of Instrumentation Cable 7 C X 1.5 mm2, Armored for Control Output.Complete in all respect as per the technical specification and direction of EIC.

Supply of Twisted Pair Shielded & Over all shielded Instrumentation Cable 5 P X 1.0 mm2, Armored for Analog Input.Complete in all respect as per the technical specification and direction of EIC.

Supply of 4 C X 4 mm2 Copper cable for extension of CT & PT.Complete in all respect as per the technical specification and direction of EIC.

Supply of 2 C X 4 mm2 Cable for DC Power Supply.Complete in all respect as per the technical specification and direction of EIC.

Supply of 4P X 0.36 mm2, Armored Communication Cable for MFM.Complete in all respect as per the technical specification and direction of EIC.

Supply of Armored CAT6 UTP Cable. Complete in all respect as per the technical specification and direction of EIC.

Supply of Un-Armored CAT6 UTP Cable.Complete in all respect as per the technical specification and direction of EIC.

Supply of Electronic Earthing and Earth Pit.Complete in all respect as per the technical specification and direction of EIC.

Supply of Multi Function Meter.Complete in all respect as per the technical specification and direction of EIC.

Supply of Industrial grade Serial Server.Complete in all respect as per the technical specification and direction of EIC.

Transformer and Accessories

Supply of 3.15 MVA. 33/11kV Power Transformer DYn11 (Outdoor Installation) with Accessories.Complete in all respect as per the technical specification and direction of EIC.

Supply of 100 KVA 33/0.433kV Energy efficient Station Transformer with HV & LV BOX.Complete in all respect as per the technical specification and direction of EIC.

Supply of Transformer Monitoring Unit (TMU).Complete in all respect as per the technical specification and direction of EIC.

Substation Earthing System GI

Supply of Earthing Conductor 75X10 mm (5.89 Kg/Mtr.) GI Flat for laying (spacing maximum 2m both ways).Complete in all respect as per the technical specification and direction of EIC.

Supply of Earthing Conductor: 50X6 mm (2.4Kg./Mtr.) GI Flat for Raiser from the burial earth mat to equipment, structure etc.).Complete in all respect as per the technical specification and direction of EIC.

Supply of Earthing Device & Associated Accessories (Heavy duty GI Perforated Pipe of ID=40mm & OD=50mm with 3000mm long for treated Earth Pit) as per Drawing.Complete in all respect as per the technical specification and direction of EIC.

33, 11 and Station Trf Structure

Supply of (125x70x5) mm Gl joist 5Mtr (13.3kg / Mtr.) (04 nos for one Power Transformer) for supporting of 33kV Cable 11kV cable (Unit Wt=0.0665 MT) & 10 mm thick MS plate size 250X250 mm at the bottom of the RS Joist duly welded & the MS plate to be suitably grouted to the floor for the rigidity.Complete in all respect as per the technical specification and direction of EIC.

Supply of (100 X 50 x5) mm Gl Channel (9.56kg / Mtr) (2Mtr- 06 nos for one Power Transformer) for supporting of 33kV & 11kV power Cable (Unit Wt = 0.01912 MT).Complete in all respect as per the technical specification and direction of EIC.

Supply of GI Nuts & Bolts etc. for column and beam & Equipment Structures.Complete in all respect as per the technical specification and direction of EIC.

Supply of High Density Polvethylene (HDPE) pipe 160 mm diameter PN-8 Complete in all respect as per the technical specification and direction of EIC.

Supply of LTDB for 100KVA, 33/0.433kV Station Transformer.Complete in all respect as per the technical specification and direction of EIC.

33 and 11 kv Power and Control, XLPE cables

Supply of 1C X 400 sqmm,33 KV, XLPE, Power cable Armored, aluminium conductor, stranded, inciuding their termination materials like glands,lugs,tagging etc. as required as per technical specificatio and scope of works.

Supply of 33 KV 1C X 400 sq.mm. Heat Shrink In Door cable end termination kit complete with all accessories and tagging etc. as per technical specifications and scope of the works.

Supply of 33 KV 1CX 400 sq.mm. Heat Shrink Out Door cable end termination kit complete with all accessories and tagging etc. as per technical specifications and scope of the works.

Supply of 33kV, 3Core, 95sqmm Aluminium, XLPE insulation UG Cable with spare (SC rating of cable in kA- 9kA and SC rating rating of Armour in kA- 9kA) For Station Trf.Complete in all respect as per the technical specification and direction of EIC.

Supply of Outdoor end termination kits Heat Shrinkable type suitable for 33kV, 3Core, 95sqmm, HT UG Cable kits for Station Trf.Complete in all respect as per the technical specification and direction of EIC.

Supply of Indoor termination kits Heat Shrinkable type suitable for 33kV, 3Core, 95sqmm, HT UG Cable kits for Station Trf.Complete in all respect as per the technical specification and direction of EIC.

Supply of 3C X 400 sqmm,11 KV, XLPE, 3 phase Power cable Armored, aluminium conductor, stranded, including their termination materials like glands, lugs, tagging etc. as required as per technical specifications and scope of the works.

Supply of 11 KV, 3C X 400 sqmm Heat Shrink In Door cable termination kit complete with all accessories and tagging etc. as per technical specifications and scope of the works.

Supply of 11 KV, 3C X 400 sqmm Heat Shrink Out Door cable termination kit complete with all accessories and tagging etc. as per technical specifications and scope of the works.

Control Cables (Copper Armoured)

Supply of 4 Core x 2.5 mm² Complete in all respect as per the technical specification and direction of EIC.

Supply of 7 Core x 2.5 mm² Complete in all respect as per the technical specification and direction of EIC.

Supply of 10 Core x 2.5 mm² Complete in all respect as per the technical specification and direction of EIC.

Supply of 12 Core x 2.5 mm² Complete in all respect as per the technical specification and direction of EIC.

Supply of 1 Core X 16 mm² Aluminium cable from Battery to Battery Charger & Battery Charger to DCDB

1.1 kV XLPE Power Cables

Supply of XLPE 4 Core x 150mm² ( for Station Transformer output). Complete in all respect as per the technical specification and direction of EIC.

Supply of XLPE 4 Core x 95mm² ( for Oil Filtration Machine Connection). Complete in all respect as per the technical specification and direction of EIC.

Supply of XLPE 4 Core x 35mm² (for Switchyard Lighting).Complete in all respect as per the technical specification and direction of EIC.

Supply of XLPE 4 Core x 16mm² (for Switchyard Lighting).Complete in all respect as per the technical specification and direction of EIC.

Supply of XLPE 2 Core x 16mm² (for Switchyard Lighting).Complete in all respect as per the technical specification and direction of EIC.

Battery & Battery Charger

Supply of 48V maintenance free VRLA Battery.Complete in all respect as per the technical specification and direction of EIC.

Supply of 48V, Float cum Boost Battery Charger.Complete in all respect as per the technical specification and direction of EIC.

Part B- ERECTION TESTING & COMMISSIONING WORKS OF FOLLOWING EQUIPMENT (As per Technical Specification)

Erection, Commissioning, Testing of 33kV Equipment for (INDOOR Sub-Station

Erection of 33kV Incoming Line Feeder Indoor AIS Panel consisting of 36kV VCB Breaker (2 no.s), Transformer Indoor AIS Panel (2no.s), 33kV Bus coupler Indoor AIS Panel (1 no.s) and 2 no PT panel - Total 7No's Switch panel board . CTR 800-400/5-5-5 for Incoming & Bus coupler, 600-300/5-5-5 for Transformer. Bus Bar size 1250Amp. Each Breaker Rating is 1250 Amp & Draw out type.The module shall be provided with complete Feeder & Transformer Feeder protection system to suit for SCADA (BCPU, Numerical Differential Relay having inbuilt of REF protection, Multi-function Meter & other provisions as per tech spec).Energy meter shall be provided on each Incoming & outgoing breaker.Complete in all respect as per the direction of EIC.

Lightning Arrester

Erection of 30kV, 10kA, Metal Oxide, Class-2 (Station Class), Surge Arrester (for 33kV Incoming Line, HT side of 2nos. Power Transformers and 33/0.433kV Station Transformer) - Outdoor Type with Surge Counter. Complete in all respect as per the direction of EIC.

Erection of 12kV, 10kA, Metal Oxide, Class-2 (Station Class), Surge Arrester with out surge counter( For Transformers & Out Going Feeders) - Outdoor type.Complete in all respect as per the direction of EIC.

Erection, Commissioning, Testing of 11kV Equipment (Indoor Type)

Erection of 11kv, upto 1250A VCB panel board Switchgear ( 2 incoming, 4 Outgoing, 1 Bus coupler, 2 Bus PT).Complete in all respect as per the direction of EIC.

Erection, Commissioning, Testing of SCADA

SCADA FOR Primary Substation. Complete in all respect as per the direction of EIC.

Erection, Commissioning, Testing of Transformer and TMU

3.15 MVA, 33/11kV Power Transformer DYn11 (Outdoor Installation) with Accessories.Complete in all respect as per the direction of EIC.

100 KVA 33/0.433kV Energy efficient Station Transformer along with HT & LT cable connection.Complete in all respect as per the direction of EIC.

Erection of Transformer Monitoring Unit (TMU).Complete in all respect as per the direction of EIC.

Erection, Laying of Substation Earthing System Gl

Earthing Conductor 75X10 mm (5.89 Kg/Mtr. )Gl Flat for laying(spacing maximum 2m both ways).Complete in all respect as per the direction of EIC.

Earthing Conductor: 50X6 mm (2.4Kg./Mtr.) GI Flat for Raiser from the burial earth mat to equipment, structure etc.Complete in all respect as per the direction of EIC.

Earthing Device & Associated Accessories (Heavy duty GI Perforated Pipe of ID=40mm & OD=50mm with 3000mm long for treated Earth Pit) as per Drawing.Complete in all respect as per the direction of EIC.

Erection of System GI 33, 11 and Station Trf Structure

(125x70x5) mm Gl joist 5Mtr (13.3kg / Mtr) (04 nos for one Power Transformer) for supporting of 33kV Cable & 11kV cable (Unit Wt=0.0665 MT) & 10 mm thick MS plate size 250X250 mm at the bottom of the RS Joist duly welded & the MS plate to be suitably grouted to the floor for the rigidity.Complete in all respect as per the direction of EIC.

(100 x 50 x6) mm GI Channel (9.56kg / Mtr) (2Mtr - 06 nos for one Power Transformer) for supporting of 33kV & 11kV power Cable (Unit Wt=0.01912 MT).Complete in all respect as per the direction of EIC.

GI Nuts & Bolts etc. for column and beam & Equipment Structures.Complete in all respect as per the direction of EIC.

Supply & Erection of GI Pipe of dia. 150mm, Class-B.Complete in all respect as per the direction of EIC.

High Density Polyethylene (HDPE) pipe 160 mm diameter PN-8.Complete in all respect as per the direction of EIC.

LTDB for 100KVA, 33/0.433kV Station Transformer along with all cable connection & fixing

Laying of 33kV and 11 kv Power and Control cables

1C X 400 sqmm, 33 KV, XLPE, Power cable Armored, aluminium conductor, stranded, including their termination materials like glands, lugs, tagging etc. as required as per technical specifications and scope of the works.

33 KV 1C X 400 sq.mm. Heat Shrink In Door cable end termination kit complete with all accessories and tagging etc. as per technical specifications and scope of the works.

33 KV 1C X 400 sq.mm. Heat Shrink Out Door cable end termination kit complete with all accessories and tagging etc. as per technical specifications and scope of the works

Laying, Commissioning & Testing of 33kV, 3Core, 1Run, 95sqmm, XLPE insulation (extruted type) UG cable with spare by open trench method.Complete in all respect as per the direction of EIC.

Erection of Outdoor end termination kits Heat Shrinkable type suitable for 33kV, 3Core, 95sgmm, HT UG cable kits.Complete in all respect as per the direction of EIC.

Erection of Indoor end termination kits Heat Shrinkable type suitable for 33kV, 3Core, 95sgmm. HT UG cable kits.Complete in all respect as per the direction of EIC.

3C X 400 sqmm, 11 KV, XLPE, 3 phase Power cable Armored, aluminium conductor, stranded, including their termination materials like glands, lugs, tagging etc. as required as per technical specifications and scope of the works.

11 kv, 3C x 400 sqmm Heat Shrink In Door cable end termination kit complete with all accessories and tagging etc. as per technical specifications and scope of the works

11 KV, 3C X 400 sqmm Heat Shrink Out Door cable end termination kit complete with all accessories and tagging etc. as per technical specifications and scope of the works

Control Cables (Copper Armoured)

Erection of 4 Corex 2.5 mm² .Complete in all respect as per the direction of EIC.

Erection of 7 Core x2.5 mm².Complete in all respect as per the direction of EIC.

Erection of 10 Core x 2.5 mm².Complete in all respect as per the direction of EIC.

Erection of 12 Core x2.5 mm².Complete in all respect as per the direction of EIC.

Erection of 1 Core x16 mm² Aluminium cable from Battery to Battery Charger & Battery Charger to DCDB. Complete in all respect as per the direction of EIC.

Laying of 1.1 kV XLPE Power Cables

Erection of XLPE 4 Core x 150 mm² (for Station Transformer output).Complete in all respect as per the direction of EIC.

Erection of XLPE 4 Core x 95 mm²( for Oil Filtration Machine Connection).Complete in all respect as per the direction of EIC.

Erection of XLPE 4 Core x 35 mm²( For Switchyard Lighting ).Complete in all respect as per the direction of EIC.

Erection of XLPE 4 Core 16 mm²( For Switchyard Liqhting).Complete in all respect as per the direction of EIC.

Erection of XLPE 2 Core 16mm²(for Switchyard Lighting).Complete in all respect as per the direction of EIC.

Erection, Commissioning,Wiring &Testing of Battery & Battery Charger

48 V ,100 AH maintenance free VRLA Battery (Set. 4 Nos. of 12V Battery with 150AH).Complete in all respect as per the direction of EIC.

48V Float cum Boost Battery Charger (15 A float charging, 25 A boost charginq).Complete in all respect as per the direction of EIC.

Erection,Commissioning,Wiring &Testing of Sub-station Lighting And Fire Fighting System.

SITC of 8way LDB with accessories

SITC of Sub-Station Switchyard Lighting ,Control Room Lighting (it includes supply of fixtures Lamps (LED) with switch gear, GI Conduit , GI octogonal Poles(if required to considering the local wind speed) etc.(120Wx 4 sets and 100Wx6 sets out side the control room, 20 Watt LED fixtures-10 sets(may be increased as per suitable LUX) inside control room. Control Room wiring to be done with Copper wires as per the requirement (Lighting fixtures are to be fixed rigidly On the Column at a suitable height with GI tubular pole so that the required lux as per the technical specification is maintained).

SITC of 1.5 Ton capacity Split Air Conditioning units with Remote control facility: Including supply of split Air conditioner 5 Star rated, voltage stabiliser, control boxes etc. for completing the A.C scheme. (AS per specification) for control room.

SITC of 1400 WW sweep 250Volt AC Celling Fan .Complete in all respect as per the direction of EIC.

SITC of 300 mm sweep 70W AC Exhaust Fan (for Battery room and Toilet).Complete in all respect as per the direction of EIC.

Fire Detection Alarm System

SITC of Main Fire ALARM Control Panel (UI /FM /UIc/Vds Approved),Intelligent Addressable Modular Fire Alarm Control Panel based on 32 bit microprocessors including the following as per specification., A. Battery charger, B. SMF Batteries for 72 Hrs back-up, C. Enclosure, D. min.240 character LCD display,( Other specification as mentioned). E. The panel should be modular,decentralized, with CPU /master control unit, Loop cards, relay and interface card by means of duplicated electronics means hardware redundancy with full functionality., F. The panel must provide MODBUS/ RS485 port for integration with SCADA. G. The loop should be capable to have at least 50 elements / devices.Complete in all respect as per the direction of EIC.

SITC of Intelligent Addressable multi sensor Detector- (Smoke+ Fixed Tempt. + Rate of rise tempt.) For ceiling (UL /FM/ULC/Vds Approved) inclusive base and other installation accessories. (must have inbuilt short circuit isolator.)

SITC of Intelligent Addressable multi sensor Detector- (Smoke + Fixed Tempt. + Rate of rise tempt.) For trench (UL /FM/ULC/Vds Approved) inclusive base and other installation accessories. (must have inbuilt short circuit isolator,).Complete in all respect as per the direction of EIC.

SITC of Response Indicator ( Twin LED transparent type).Complete in all respect as per the direction of EIC.

SITC of Addressable manual Call Point (must have inbuilt short circuit isolator(UL /FM /ULC/Vds Approved).Complete in all respect as per the direction of EIC.

SITC of Electronic Hooter/Multi tone sounder (must have inbuilt short circuit isolator,) (UL /FM /ULC/Vds Approved) Indoor type.Complete in all respect as per the direction of EIC.

SITC of 2 Core X 1.5 sq.mm copper conductor, armored, RED colour FRLS PVC sheathed signal Cable confiring to IS standards and specifications.Complete in all respect as per the direction of EIC.

SITC of Supply & erection of 4Cx2.5sqmm copper armoured FRLS cable confirming to IS standard with accessories (Gland, lug, saddle, etc.).Complete in all respect as per the direction of EIC.

SITC of Supply & erection of steel wire reinforced flexible conduct pipe (16MM) with all accessories.Complete in all respect as per the direction of EIC.

SITC of Supply & erection of Surge Arrester.Complete in all respect as per the direction of EIC.

SITC of Lightning arrester Rod in Top of PSS Building along with all accessories.Complete in all respect as per the direction of EIC.

Fire Fighting System (portable and wheel mounted sets for control room)

SITC of Foam type- 5 Ltrs.Complete in all respect as per the direction of EIC.

SITC of CO2-4.5 Kgs.Complete in all respect as per the direction of EIC.

SITC of Dry powder 4.5 Kg.Complete in all respect as per the direction of EIC.

SITC of Fire Bucket with GI Stand with Gl Canopy arrangement (4nos. in one Stand=1 Set).Complete in all respect as per the direction of EIC.

AC& DC System for Auxiliary supply

AC System

SITC of ACDB as per specification.Complete in all respect as per the direction of EIC.

SITC of Main Lighting Distribution Board (as per specification).Complete in all respect as per the direction of EIC.

SITC of Indoor Lighting Distribution Board as per specification.Complete in all respect as per the direction of EIC.

SITC of Receptable Panel near Power Transformer.Complete in all respect as per the direction of EIC.

DC System

SITC of 48V DC Distribution Board as per specification.Complete in all respect as per the direction of EIC.

SITC of Water Cooler with water purifier system as per Technical Specification.Complete in all respect as per the direction of EIC.

SITC of Maintenance Testing Equipment as per Technical Specification Complete in all respect as per the direction of EIC.

SITC of Tools and Plants (T&P's) Requirement as per Technical Specification

SITC of Office Furniture as per Technical Specification.

Laying of Materials for Installation of Power Transformer on Plinth (as per Drawing )

SITC of 90 lb Rail 5.4 mts (2.7x2) 44.62 per mtr Transformer each (Unit Wt=0. 240 MT).Complete in all respect as per the direction of EIC.

SITC of (500x500x10) mm Gl plate 6 nos Transformer each (Unit Wt=0.013 MT).Complete in all respect as per the direction of EIC.

SITC of (65x65x5) mm Gl angle of 5.4 mts length.4.9 kg/mtr. Transformer each (Unit Wt=0.026MT).Complete in all respect as per the direction of EIC.

SITC of Chequered plate 1000X300X5.6 mm thick for Cable Trench in side Control Room 12 Mtr.Complete in all respect as per the direction of EIC.

Part B- Civil Works with supply of all materials like Cement. MS tor rod, Brick, Coarse & Fine Agregrates & Labour.T&P etc

Contour survey,plotting the contour on graph sheet and marking the finished ground level

Cutting for Levelling and disposal of excess earth either in low laying area in sub-station or outside.

Filling of S/S area with borrowed earth (rolling & compacting of filled up soil before taking measurement). Upto 3M depth.

OUT DOOR DRAIN to DISCHARGE SWITCHYARD/ WATER FROM WASH BASIN AND CONTROL ROOM ROOF (10 mts

Excavation in all lype soil (1.35x10x0.7)

PCC(1:3:6 )(1.35x10x0.1)

PCC (1:2:4) (0.3x10x0.05)

Brick Masonary with cement mortar (1:5) (0.25x10x0.925+1/2x0.15x0. .93x 10)+(0.25x 10x0.925)

Plastering with Cement mortar (1:6) (2x0.25x 10+2x0.925x10+1x0.925x10+1x1.0x10)

Switch Yard and COMPOUND WALL For PILE Foundation for SBC Upto 10, for Open Cast for SBC more than 10 (FOR 50x40 MTR AREA), as per technical specification and scope of work.

Construction of 2.5Mtr height (Above NGL) Compound-wall (with RCC column & beam with M-20 Grade concrete) along the property line of the sub-station as per technical specification and instruction of Engineer in Charge.(the size of the bricks shall be 250mm having 1st class Fly-ash brick having compressive strength with 75kg/cm2). This also includes excavation in all types of soil or rocks, backfilling ,and disposal of excess earth (Brick works rested on RCC Beam and RCC Column & footings including Cement Plastering Cement wash, Wall Painting two coats with weather coat. Provision of the boundary wall Fencing with Gl Grill of 700 mm height (20Kg / Mtr) fixing at the top of the wall. It includes supply of all. the materials of the fencing.

Boring and casting 300 mm dia single under reamed pile of 3.00 m. long with R.C.C. M-20 using 20 mm down graded chips with cost of all materials, Steel Rods, labours, T&P etc. & all other machinaries required for Compound Wall work etc.complete D all respect as per latest specification & direction of the Engineer In charge at a spacing of 3.3m c/c

Power Transformer wilth Switch Yard GI Chain Linking Fencing with 2 Mtr Height.

Power Transformer Foundation/ One (3.15 MVA)

Excavation in all type soil per Tfr.(3X3X1.1 mtr)

PCC(1:3:6) per Tfr.(3X3X0.075 mtr)

RCC ( 1:1.5:3) per Tfr. As per drawing

RRHG stone grouting with sand per Tfr

Construction of 100kVA 33/0.4 kV station Trf. Plinth

Excavation in all type soil (2.5X2.5X0.750mtr)

PCC (1:3:6 ) (2.5X2.5X0.075 mtr)

RCC (1:1.5:3 ) (1.5X1.5X0.1 mtr)

Brick Masonary work (2.5x2.5x.925+2x(.5 x1.5x2.25) (1:5)

Cement Plasterinq (1:6) (1.5x2.25x4) +(1.5x1.5) 20mm thick

Construction of oil sump pit for Transformer (1.6 X 1.6 X 2.3)

Excavation of Earth(2.0x2.0x2.1)

PCC (1:3:6) 2X2X0.1

RCC(1:1.5:3) 1.6X1.6X0.1 for Top Slab

Brick Masonary work(2x2.1+2x1.6)x0.25x2.3 (1:5)

Cement Plastering (1:6) 2.3 (4x2.1+ 4x1.6 )+ 1.6x1.6

Drainage for Oil sump pit with 250 dia hume pipe

ROAD (6 Mtrs wide) Length of the road 20 mtrs

Excavation in all type soil 0.5mx1mx5m

Boulder Packinq 0.5mx1mx5m

Water base course -I 0.075mx1mx5m

Water base course -II 0.075mx1mx5m

PCC(1:2:4) 0.1mx1mx5m

Fly ash Brick masonary in cement mortar (1:6) using the bricks of size 10" x 5" x 3" of crushing strength not less than 75 Kg/ centimetre square with dimensional tolerance 3% after immersing the bricks for 6 hours in water before use including hoisting to required height placing in position scaffolding, splays cutting, circular moulding, corbelling ,chamfering and similar such type of work watering and curing etc. including cost, conveyance, royalty, cess, and taxes of all other materials machinaries scaffolding all labour T&P articles required for the work etc. complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer-in-charge.

(125x70x5) mm RS Gl joist 5Mtr (STATION)

Excavation with back filling L 1mxW 1xD 2

Baffle Wall

Excavation with back filling 4.2mx0. 75mx0.5m

PCC 1:3:6 4.2mx0.75mx0. .1m

RCC 1:1.5:3 0.75x3.8x0.2+ 0.5x3.4x0.2 +2.5x3x0.15

PCC (1:4:8) With cement For S/S area(75 mm) per Sq. mts.(8x16x0.075)

Metal Spreading 100 mm. per Sq. mts. Area of spreading.

Switchgear Cum Control Room (22x10Mts) (column & beam based) (as per specification & Inclusive of doors, windows, collapsible gate, PHD fittings, electrification, inner cable trench, Two nos main doors with concrete pillars, beams) etc. as per Technical specification in Civil section. Layout Drawing

Switchgear Cum Control Room For Pile foundation in FLOOD AREA (with SBC upto 10)

Boring and casting 300 mm dia single under reamed pile of 5.00 m. long with R.C.C. M-20 using 20 mm down graded chips with cost of all materials, labours, T&P etc. & all other machinaries required for the work etc. Complete in all respect as per latest specification direction of the Engineer in charge.

Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed the with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up required depth and depositing the excavated materials away from the work site within initial leads and lifts including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire running charges of water pumps sundries T&P& all other machinaries required for the work etc. Complete in all respect as per latest specification & direction of the Engineer in charge.

Supplying and filling in foundation and plinth with good river sand well watered and rammed in layers not exceeding 23 cm in each layer including all leads and Slifts, cost of all materials labour,cess, sundries, T&P required for the work etc Complete in all respect as per latest specification & direction of the Engineer in charge.

Providing and lying plain cement concrete of proportion (1:3:6) in foundation and plinths cement 40 mm. size black hard crusher broken granite stone metal and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading. unloading, royalties and taxes of all materials and cost of all labours. cess, sundries, T&P all other machinaries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc. Complete in all respect as per latest specifications & direction of the Engineer in charge.

KB. Brick masonary in cement mortar (1:6) using the bricks of size 10" x 5" x 3" of crushing strength not less than 100 kg/centimeter square with dimensional tolerance 3% after immersing the bricks for 6 hours in water before use including hoisting to reauired height placing in position scafflding, splays cutting, circular moulding, corbelling, chamfering and similar such type of work watering and curing etc. including cost, conveyance,royalty,cess and taxes of all other materials machinaries scaffolding all labour T&P articles required for the work etc.complete in all respect as per the latest specification confirming to relevant IS Specification and direction of the Engineer in charge.

In Foundation and Plinth

Ground Floor

RCC work M-20 grade as per approved designs and drawings having e minimum compressive strength (in work test) 200 Kg./ Sqcm.in 15 cm. cubes at 28 days after mixing and test conducted In accordance with I.S.456 and I.S 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips screened and washed sharp sand for mortar of approved quality from approved quarry, to be mixed in concrete mixture with approved quality cement including hoisting. lowering laying and compacting concrete by using vibrators, watering and curing for 28 days, centering and shuttering and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes and cess of all materials, cost of all labours, sundries. T&P & all other machinaries required for the work but excluding cost and conveyance of M.S. or Tor steel and binding wires etc.Complete in all respect as per latest specification & direction of the Engineer in charge

Pile cap & Grade beam

R.C.C. wall

Plinth Beam

Column & Beam- Ground Floor

Lintel-Ground Floor

65mm thick R.C.C.Chajja- Ground Floor

Roof slab - Ground Floor

Staircase- Ground Floor

Cutting Straightening coiled or bent up M.S. rods or Tor steel welding or jointing if necessary, bending, binding, tying the grills as required for R.C.C. works, providing fan hooks where necessary and hoisting, lowering and placing in proper position according to approved designs and drawings including Cost, conveyance, loading, unloading. taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S. rod/ Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost etc. complete in all respect as per directionof the Engineer-in-charge.

Ground Floor

Supplying,fitting and fixing vitrified tile 60x60cm plain Ivory 8 to 10 mm thick in floors of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, takes labour T&P etc. required for the work. complete in all respect as per the latest specification and direction of the Engineer-in-charge.

Supplying fitting and fixing vitrified tile 60x60cm plain lvory 8 to 10 mm thick in dado of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, takes labour T&P etc. required for the work etc. complete in all respect as per the latest specification and direction of the Engineer-in-charge.

Supplying,fitting and fixing Floor of size 40cmx40cm/ 30cmx30cm in floors on 25mm thick bed of cement mortar 1:1 (1cement :1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles of required thickness of approved quality including cost of all materials takes labour T&P etc. required for the work.etc complete in all respect as per the latest specification and direction of the Engineer-in-charqe.

Providing fitting fixing Glazed /Ceramic tiles of size 20cmX30cm & 6.5 to 6.7mm thick of size up to 0.10sqm in wall dados skirting and on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing and polishing complete including cost of precast tiles etc. complete in all respect as per the latest specification and direction of the Engineer-in-charge.

Supplying fitting and fixing 5"x2(1/2)" size Dressed seasoned Sal wood chaukaths including cost, conveyance royality taxes of all materials, labour, all other machinaries, T&P articles required for the work complete in all respect as per the direction of the Engineer-in-Charge.

Supplying, fitting and fixing 30mm/32mm flush door shutter (Non-Sal hard wood frame fixed with 4mm BWR ply on both sides of frame. including cost conveyance royality taxes of all materials. labour, all other machinaries T& P articles required for the work complete in all respect as per the direction of the Engineer-in-Charge.

Providing and fixing of sliding windows of approved make to be febricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick "D" quality, galvanized as per IS-277 with zinc of 120 Gm/ Sqm.) including cost conveyance royality taxes of all materials. labour, all other machinaries, T&P articles required for the work complete in all respect as per the direction of the Engineer-in-Charge. DOUBLE SHUTTER SLIDING WINDOW

Providing and fixing of FRP door frame including cost conveyance royality taxes of all materials, labour, all other machinaries, T& P articles required for the work complete in all respect as per the latest specification and direction of the Engineer-in-Charge.

Providing and fixing of FRP door shutter including cost conveyance royality taxes of all materials, labour, all other machinaries, T&P articles required for the work complete in all respect as per the latest specification and direction of the Engineer-in-Charge.

Providing 16mm. thick cement plaster with cement mortar of mix (1:6) with approved quality cement with screened and washed sharp sand for mortar and finished smooth to the surface over brick work after racking out the joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cess and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge

Ground Floor

Providing 12mm. thick cement plaster with cement mortar of mix (1:6) with approved quality cement and screened and washed sharp sand for mortar and finished smooth to the surface over brick work after racking out the Joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes,cess, of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charger in charge.

Ground Floor

Providing 12mm. thick cement plaster with cement mortar of mix (1:3) with approved quality cement with screened and washed sharp sand for mortar and finished smooth to the surface in ceiling and R.C.C. surface after chipping the surface in all floors including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cess, and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for work etc. complete in all respect as desired Aa the Engineer in charge

Ground Floor

Providing and finishing the wall surface with two coat of cement wash including scaffolding all labour,cost,conveyance, cess taxes of all materials, T&P articles,brushes all other machineries required for the work complete all respect confirming to relevant I.S Specification and direction of the Engineer-in-Charge

Ground Floor

Supplying fitting and fixing of M.S shutter made out of M.S Angle 40mmx40mmx6mmm, M.S.Flat 19 mm x5 mm size ,M.S. guide, top hood cover etc. as per design provided including cost, conveyance, royalities of all materials, cost of all labour, T&P articles required for the work etc. complete in all respect confirming to relevant I.S specification and direction of the Engineer-in Charge.

Supplying, fitting and fixing of M.S grill made out of M.S M.S.Flat 19 mm x 5 mm size, as per design provided including cost, conveyance, royalities of all materials, cost of all labour, T&P articles required for the work etc. complete in all respect confiring to relevant I.S specification and direction of the Engineer-in Charge

Wall painting 2 coats with acrylic distemper over one coat Of wall primer of approved shade on new work to give an a even shade in all floors at all height including scafolding,cost of brushes including cost of paint ,cost conveyance, royality of all materials ,labour,T&P articles required for the work etc. complete in all respect as per the latest specification and direction of the Engineer-in-charge.

Ground Floor

Painting two coats with weather coat on exterior walls surface of approved quality and approved shade over a coat of primer in all floors at all height approved quality and shade including cleaning and sand papering the surface and making surface smooth with cost, conveyance, loading, unloading, and taxes of all materials, cost of all labour, sundries, T&P scaffolding etc. required for the work complete in all respect as directed by Engineer-in-charge

Ground Floor

Painting two Coats with approved colour synthetic enamel paint on wood / iron work in all floors at all height including scafolding cost conveyance royality of all materials labour.T&P articles required for the work etc. complete in all respect as per the latest specification and direction of the Engineer-in-charqe.

Providing cement concrete (1:1.5:3) using 12mm size black hard crusher broken granite stone chips, screened & washed sharp sand for mortar of approved quality and from approved quarry, including hoisting. lowering. laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P & all other machinaries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc. Complete in all respect as per latest specification & direction of EIC.

Supplying,fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance,taxes of all materials, labour, T&P etc. required for the complete in all respect.

Providing and fixing M.S. fan clamp type-l of 16mm dia M.S. bar bent to shape with hooked ends in R.C.C. slab during laying including painting the exposed portion of loop as per standard design complete as directed by the Engineer-in-charge.

Providing 12mm. thick cement plaster in cement mortar of mix (1:4) with neat cement punning with approved quality cement with screened and washed sharp sand for mortar and finished smooth to the surface in ceiling and R.C.C. surface after chipping the surface in septic tank including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cess, and taxes of all materials and cost of all labours, sundries T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge.

Providing neat cement punning with approved quality cement finished smooth to the surface etc. complete with cost conveyance, loading unloading, royalties, cess and taxes of all materials and cost of all labours, sundries T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge

40 mm thick grading concrete with cement concrete (1:2:4) using 12mm and down graded b.h.g. chips to the roof surface with water proofing cement compound finished smooth over RCC slab including hoisting and laying in position watering and curing for required number of days finished to smooth surface and desired slope including cost, conveyance, royalty and taxes of all materials, labour, T&P articles required for the work etc. complete In all respect confirminq to relevant I.S specification and direction of the Engineer-in-Charqe.

Providing Fitting, fixing of Aluminium Door with OEL or equivalent anodized AL. door section as vertical member, as top, as bottom and middle member and 8mm plain glass fixed to door to be completed including all cost of labour T&P hire charges of drilling machine labour charges etc.complete In all respect confirminq to relevant I.S specification and direction of the Engineer-in-Charqe..

Supply & Fixing of alluminium Ventilator with 8 mm thick glass as per approved drawing

Finishing surface of wall with Acrylic wall Putty(water Based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes. labour, T&P etc. complete in all respect as desired by the Engineer in charge..

Septic Tank

Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed upto the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps, sundries T&P all other machinaries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Supplying and filling in foundation and plinth with good river sand well watered and rammed in layers not exceeding 23 cm in each layer including all leads and lifts, cost of all materials, labour,cess. sundries, T&P required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge

Providing and lying plain cement concrete of proportion (1:3:6) in foundation and plinths using approved quality cement 40 mm. size black hard crusher broken granite stone metal and screened, washed sharp sand for mortar of aporoved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P& all other machinanies required for the work including shoring, shuttering and dewatering if required including hire& running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge

RCC work M-20 grade as per approved designs and drawings having minimum compressive strength (in work test)200 kg/ Sqcm.in 15 cm. cubes at 28 days after mixing and test conducted in accordance with 1.S.456 and I.S 516 using 12mm. to 20 mm. size black hard crusher broken granite stone chips, screened and washed sharp sand for mortar of approved quality from approved quarry. to be mixed in concrete mixture with approved quality cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centering and shuttering and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes and cess of all materials and cost of all labours, cess, sundries, T&P& all other machinanies required for the work but excluding cost and conveyance of M.S. or Tor steel and binding wires etc..complete in all respect as per latest specification & direction of the Engineer in charge

P.H. Fitting (Internal & External) to Switch-Gear -Cum -Control Room

Supplying all materials,labours,taxes and tools and plants for fitting and fixing of PVC pipes of following nominal bore conforming to ASTM-D-1785 (Schedule-80) including fittings and laying as per the site requirement etc., all complete including testing as per the direction and specification of Engineer-in-charge.

15 mm dia

20 mm dia

25 mm Blp

40 mm dia

50 mm dia

Supplying all material, labour,T&P & fitting,fixing the following different water Supply fittings of approved make with including supply of all necessary jointing materials etc. all complete as directed by the Engineer-in-charge.

25 mm dia Ball valve

50 mm dia Ball valve

25 mm dia F.W. valve

50 mm dia F.W. valve

Supplying all labour T&P and cutting holes in brick masonry wall for taking pipes through and mending good the damages with supply of all required materials etc. complete as per the direction of the Engineer-incharge

For 15mm to 50mm CPVC pipe to pass in 125mm to 250mm thick wall

Supplying all labour T&P and materials and making grooves in brick walls vertically and horizontally to the required depth and width for fixing pipes & fittings of sizes 15mm dia to 25mm dia in the grooves, testing the pipe line against leakage, and filling the grooves with cement mortar(1:4) to bring the surface to original level including cost of mortars, curing and conveyance of materials etc. complete as per direction of the Engineer-in-charge.

Supplying all materials , labour T&P and fittings of approved quality required for fixing of NP or CP Brass or GM fixtures of following sizes and specification with leak proof threaded joints tightened with spun yarn and white zinc or any tightened with spun yarn and white zinc or any including testing and rectification of detects, after testing complete as perdirection of Engineer-in-charge.

Bibcock

Lonq Body Bibcock

Pillar cock

Angular stop cock

Soap Holder

Towel ring

Toilet paper holder

Glass self 22"

Towel rail 24"

Shower arm 190mm long light

CP Grating

Concealed stop cock

Connecting Pipe

Basin with pedestal

Providing and fixing vitreous China water closet (European with seat and lid), of Cerra Cascade "CASINO", CP brass buffers, 10 liter cascade dual flushing cistern hinges & rubber with fittings and brackets, 40 mm flush bend of CP brass.20mm overflow pipe with special & mosquito proof coupling complete, painting on brackets and making good the walls and floors wherever required.

Providing and fixing vitreous China water closet Indian type of Orissa pattern Size (580mmx440mm) of approved quality with PVC Slimeline (Parryware make) 12.5 ltr capacity low level cistrn with hinges & rubber with fittings and brackets. 40mm flush bend of CP brass 20 mm overflow pipe with specials & mosquito proof coupling complete painting on brackets and making good the walls and floors wherever required.

Providing and fixing vitreous China water urinal of Cerra/Parry ware with fittings and brackets, flush bend of CP brass, and making good the walls and floors wherever required.

Supply of all materials, labour, T&P,fitting and fixing in all a floors fixed type bevelled plate glass mirror of size 600mm x450mm x 5.5mm thick best Indian make, supply of 13mm thick asbestos backing and CP Brass Screw including cost, conveyance, taxes of all materials complete as per specification and direction of Engineer-in-charge(Make-Modi Guard/Belgium)

Supply of all materials, joining materials ,labour and T&P and laying UPVC SWR PIPES of Standard make with ISI Mark duly approved by the Engineer-in-charge including jointing, earthwork in excavation of trenches in all kind of soil to the required depth and refilling of pipe line trenches in 0.3048 mtrs layers with 300 mm deep sand around cushion duly watered and rammed or fixing to walls, floors with Supply of necessary clamps, nails and cutting the pipe to length with wastage including supply of all Clamps Clips Endcaps & jointing materials etc., complete as per standard specification and direction of Engineer-in-charge.

100mm dia (ISI Marked)

150mm dia (ISI Marked)

Supplying all materials, labour T&P for jointing of the UPVC SWR SEWER pipe & fittings of standard make duly approved by the Engineer-in-charge suitably required for fixing on 100mm dia soil waste pipe complete with requisite testing as directed by Engineer-in-charge.

100mm dia "P" Trap

100mm dia Bend Plain

100mm Door Bend

100 mm dia Single Junction with Door

100 mm dia double Junction with Door

100mm dia Teminal Guard

100mm dia. Floor trap

Supplying all materials, labor T&P for jointing of the UPVC SWR SEWER pipes & fittings of standard make duly approved by the Engineer-in-charge suitably required for fixing on 100mm dia soil waste pipe complete with requisite testing as directed by Engineer-in-charge

100mm Pipe

Fixing of UPVC vent pipes Including labour & T&P all complete as directed by the Engineer-in-charge

100mm Pipe

100mm Vent Cowl

Supplying all materials labour T&P and constructing inspection chamber C.C.(1:4:8) on bed with hard stone metal size 40mm and 250mm K.B.Bricks work having crushing strength 75 Kg to 99 Kg/cm2 in cement mortar (1:4), R.C.C. roof slab with 500mm dia light pattern factory made SFRC M.H cover with frame, moulding and shaping the channel and benching with C.C. 1:2:4 with hard granite chips 12mm size, 12mm thick C.P 1:3 including cement punning inside cavity around the Cement plaster (1:3) outside the chamber, earth work in excavation In all kinds of soil and refilling the cavity around the chamber as per detail drawing & design and specification including cost, conveyance, taxes etc. all complete as directed by Engineer-in-charge.

750mmx 750mm x450mm

Providing and fixing 2000 litres capacity P.V.C Over head (Sintex make) tank with all piping and valve arrangement with all labour & materials ,including cost, T&P scaffolding etc., complete as directed by the Engineer-in-charge.

2000 Ltr Capacity

Watering system like 150 mm dia, 100 Mtr deep bore well (PVC pipe to be used) 1 HP submersivele pump, switch yard water hydrant system for pouring water into the earth pits, tap for garden, including PVC pipes & other accessories required etc.

RRHG retaing wall with 1:5 cement mortar Considering 0.6 mt height of retaining wall above the existing ground level per Meter as per Drawing TOTAL 74 Mtrs

Excavation in all type of soil(0.8 Cum Mtr)

PCC (1:4:8)200 mm thick. With cement (0.2 Cum/ Mtr)

PCC (1:2:4) 50 mm thick With cement( 0.02 Cum/ Mtr)

RRHG Cement Masonary(1:5) With cement (0.86 Cum /Mtr)

Laying of cable trench with supply of GI Cable Trench material & all Civil works

Laying of 2 tier 2 rows cable trench (internal width 1500 mm,depth 680 mm, with 75X75X6 mm support angles fixed RCC column of 250 X 250 mmwith ladder type cable tray (45X45X5mm two angles at both side having welded flats of 25X5mm at a gap of 150mm) for Power & control Cable. It includes supply of GI Cable Trench materials. supply of all civil items as per site requirement and as per detail drawing & design and specification including cost, conveyance, taxes etc. all complete as directed by Engineer-in-charge.

Laying of 2 tier 1rows cable trench (internal width 750 mm,depth 680 mm, with 65X65X6 mm support angles fixed RCC column of 250 X 250 mm& with ladder type cable tray (45X45X5mm two angles at both side having welded flats of 25X5 mm at a gap of 150mm) for power & control Cable It includes supply of GI Cable Trench materials, supply of all civil items as per site requirement and as per detail drawing & design and specification including cost, conveyance, taxes etc.all complete as directed by Engineer-in-charge.

Laying of 2 tier 1 rows cable trench (internal width 500 mm,depth 580 with 50X50X6 mm support angles fixed RCC column of 250 X 250 mm & with ladder type cable tray (45X45X5mm two angles at both side having welded flats of 25X5mm at a gap of 150mm) for Power & control Cable. It includes supply of GI Cable Trench materials, supply of all civil items as per site requirement and as per detail drawing & design and specification including cost, conveyance, taxes etc. all complete as directed by Engineer-in-charge.

Excavation of Earth for 13 Mtr. long poles pit. (1000mm X 500mm X 2275mm)= 1.14 Cu.mtr .), as per technical specification and scope of work.

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX2200mm) = 0.55 Cu.mtr as per technical specification and scope of work

Couping of poles in ratio 1:1.5:3 with dimension 500X500X450)= 0.1125 Cu mtr, as per technical specification and scope of work.

Excavation of Earth for 11 Mtr. long poles pit. (1000mm X 500mm X 1875mm)= 0.94 Cu.mtr.), as per technical specification and scope of work.

Concreting of poles in ratio 1:1.5:3 (500mmX500mmX1800mm) = 0.45 Cu.mtr as per technical specification and scope of work.

Couping of poles in ratio 1:1.5:3 with dimension(500X500X450)= 0.1125 Cu mtr, as per technical specification and scope of work.

Fixing of stay set with 0.5Cum cement concrete foundation PCC 1:3:6 size C 900mmx600mmx900mm) using 40mm BHG metal with all labor and material, including excavation and required backfling, as per technical specification and scope of work.

Making of earth chamber with 50mm thick RCC Slab (with 8mm rod) cover for earth pit of size 450mmX450mm X600 mm depth as per direction of Engg in Charge.

Construction of 600mm dia Hume Pipe Single row culvert and approach road for Control room-cum- Swith gear room.

Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders except sheet rock and boulders requiring blasting including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site within initial leads and lifts, including shoring, shuttering & dewatering (if required) with cost of labour,cess, hire & running charges of water pumps sundries T&P & all other machinaries required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Supplying and filling in foundation and plinth with good river sand well watered and rammed in layers not exceeding 23 cm in each layer including all leads and lifts, cost of all materials, labour,cess, sundries, T&P required for the work etc.complete in all respect as per latest specification & direction of the Engineer in charqe.

Providing and lying plain cement concrete of proportion (1:3:6) in foundation and plinths using approved quality cement 40 mm. Size black hard crusher broken granite stone metal and screened, washed sharp sand for mortar of approved quality and from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid layers not exceeding 15 cm. thick in each layer including cost, conveyance, loadines, unloading, royalties and taxes of all materials and cost of all labours, cess, sundries, T&P all other machinaries required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Providing cement concrete of M-15 grade using 20mm down graded black hard crusher broken granite stone chips,screened washed sharped sand of approved quality and from approved quarry, including hoisting, lowering. laying,concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading. unloading, royalties and taxes of all materials and cost of all labours, cess,sundries, T&P & all other machinaries required for the work including shoring,shuttering and dewatering if required including hire & running charges of water pump etc.complete in all respect as per latest specification & direction of Engineer in charge.

Providing.laying and fixing In position R.C.C.hume pipes with collars jointed with cement mortar 1:3 complete with cost of all materials. and cost of all labours. cess sundries. T&P & all other machinaries required for the work etc.complete respect as per latest specification direction of the Engineer in charge.

Providing rough stone dry packing for guard walls & retaining walls including cost conveyance of all materials and cost of all labours cess, sundries T&P etc.complete in all respect as per latest specification & direction of the Engineer in charge.

Rolling and compacting to sub grade or formation loosening cutting ordinary earth for 0.15 Mtr. depth including watering and rolling by PRR as per specification and direction of Engineer-in-Charge. (Data for 100sqm x 0. 15m= 15Cum)

Conveying from the stacks supplying, spreading morrum & sand mixture to proper camber and consolidation with H.R.R. including watering as per specification and direction of Engineer-in-Charge

Soling the road surface with soling stones including filling the interstices with moorum and rolling with PRR including cost conveyance of all materials and cost of all labours, cess, sundries, T&P etc.complete in all respect as per latest specification& direction of the Engineer in charqe.

Supplying and filling in sub base of road with borrowed earth including rolling &compacting all works complete as per specification and instruction of engineer. Payment shall be made for compacted volume only as per spot levels taken at 2 intervals before start of work and a after completion of the filling works.

Part C- Construction of 33 KV 4 Pole using WPB GI Pole 160x152(13Mtr. Long,30.44KG/Mtr) with 2 nos. of isolator without earth switch & LA and 1 no of isolator with earth switch & LA.(To be executed by party andmaintenance by TPCODL under 6% deposite sceme)

Supply and erection of 13mtr long 160 x 152 WPB pole (GI) (30.44KG/Mtr.). Including excavation of pole pit in all king of soil with depth upto 1/6th of pole height. Complete in all respect as per the specification and direction of EIC.

Supply and installation of Top Channel 100X50X6mm, 9.56 KG/Mtr. each channel length 4.3 mtr., 8 no's channel required =(8x9.56x4.3). Complete in all respect as per the specification and direction of EIC.

Supply and installation of Fish Plate 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 24 no's required = (24x2.36x0.280).Complete in all respect as per the specification and direction of EIC.

Supply and installation of Isolator Support Support Cahnnel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 2 no's channel required =(2x7. 14x4. 37 Isolator. Complete in all respect as per the specification and direction of EIC.

Supply and installation of Double Pole Belting Channel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 8 no's channel required =( 8x7.14x4.3). Complete in all respect as per the specification and direction of EIC.

Supply fabrication and installation of 50x50x6mm.Gl Bracing Angle, 4.5Kg./mtr., each angle length 4.927 mtr., 8 nos angle required = (8x4.5x4.927). Complete in all respect as per the specification and direction of EIC.

Supply and installation of Isolator Operating Down Pipe Support Cahnnel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 0.8 Mtr.,1 no channel required =( 1x7.14x0.8)/ Isolator. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Down Pipe Diagonal Support Angle, 4.5Kg./mtr., each angle length 0.388mtr., 1 no angle required (1x4.5x0.388)/ Isolator Complete in all respect as per the specification and direction of EIC.

Supply & installation of Down Pipe Base Support Angle, 4.5Kg /mtr.,each angle length 0.34mtr., 1 no angle required n (1x4.5x0.340)/ Isolator. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Isolator Support Side Cahnnel 100X50X6mm, 9.56 KG/Mtr., each channel length 0.5 mtr., 2 no's channel required =( 2x9.56x0.5)/ Isolator. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Danger Plate, 2 no's.. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Gi Pipe Earthing 40mm. 3 Mtr. Long). Complete in all respect as per the specification and direction of EIC.

Supply & installation of 50x6mm GI Flat for earthing, 2.36kg/mtr., (15 Mtr. For L.A, 4 Mtr for Isolator Body, 2.5 mtr. For mesh formation and 5 mtr. For raising). Complete in all respect as per the specification and direction of EIC.

Supply & installation of GI barbed wire anticlimbing device 3 Kg. Per support, 4 no's qty. required =(4x3kg). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 16 no's =(16x0.59x0.510). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Lightning Arrester(30KV,10KA) (Station Class,class-2). Complete in all respect as per the specification and direction of EIC.

Supply & installation of 33KV 1250 A ISLTR 48V DC W/O E/S- GI BOX. Complete in all respect as per the specification and direction of EIC.

Supply & installation of 33KV 1250 A ISOLATOR 25KA W E/S-SS BOX. Complete in all respect as per the specification and direction of EIC.

Supply & installation of H W fitting(B&S) 90KN,4 Bolt. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Disc insulator (B&S)90 KN polymer. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Wedge Connector for 232 sq.mm AAA conductor. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Paddle Clamp For Wedge Connector for 232 sq.mm AAA conductor. Complete in all respect as per the specification and direction of EIC.

Supply, paving and Stringing of 232 sq.mm AAA conductor. Complete in all respect as per the specification and direction of EIC.

Supply & installation of GI Nut . Bolt & Washer of different sizes. Complete in all respect as per the specification and direction of EIC.

Supply and painting of Black paint as required and direction of EIC.

Supply & installation of Poly Carbonate Bird Guard. Complete in all respect as per the specification and direction of EIC.

Supply and painting of Yellow colour paint for background as required and direction of EIC.

Part C- Cost of Civil Works.

Mass concreting of Pole ratio 1:1.5:3 (500mmX500mmX2200mm)= 0.55Cu.Mtr .Complete in all respect as per the specification and direction of EIC.

Couping with ratio 1:1.5:3 with dimension( 500X500X450)= 0.1125 Cu mtr. Complete in all respect as per the specification and direction of EIC.

Construction Earthing chamber including installation of earthing pipe. Making earthing chamber including excavation, soil treatment with bentonide powder, calculation of earth resistance including Installation of 3Mtr Gl pipe 40mm/50mm including welding of GI flat around pipe. Complete in all respect as per the specification and direction of EIC.

Part D- Construction of 2 no of 33kv DP with Isolator and without Earth Switch using 13 Mtr WPB GI Pole(Refer SLD Point E & G) and construction of 1no of 33KV DP with isolator and Earth switch using 13 Mtr WPB Pole(Refer SLD Point H) .

Supply and erection of WPB (GI) Pole 160x152 (13Mtr. Long, 30.44KG/ Mtr. Including excavation of pole pit in all king of soil with depth upto 1/6th of pole height. Complete in all respect as per the specification and direction of EIC.

Supply and installation of Top Channel 100X50X6mm, 9.56 KG/Mtr., each channel length 4.3 mtr., 2 no's channel required =( 2x9.56x4.3).Complete in all respect as per the specification and direction of EIC.

Supply and installation of Fish Plate 50x6 mm., 2.36 kg/Mtr. each 0.280 mtr. length 6 no's required = (6x2.36x0.280).Complete in all respect as per the specification and direction of EIC.

Supply and installation of Insulator Support Cahnnel 75X40X4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr 1 no's channel required =( 1x7.14x4.3).Complete in all respect as per the specification and direction of EIC.

Supply and installation of Isolator Support Cahnnel 75X40X 4.8mm., 7.14KG/Mtr. , each channel length 4.3 Mtr., 2 no's channel required =( 2x7.14x4.3). Complete in all respect as per the specification and direction of EIC.

Supply and installation of Double Pole Belting Channel 75X40X4.8mm., 7.14KG/Mtr., each channel length 4.3 Mtr., 4 no's channel required =(4x7.14x4.3) .Complete in all respect as per the specification and direction of EIC.

Supply and installation of 50x50x6mm GI Bracing Angle. 4.5Kg /mtr., each angle length 4.927 mtr., 4 nos angle required =(4x4.5x4.927).Complete in all respect as per the specification and direction of EIC.

Supply and installation of Isolator Operating Down Pipe Support Cahnnel 75X40X 4.8mm., 7.14KG/Mtr., each channel length 0.8 Mtr.,1 no channel required =( 1x7.14x0.8). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Down Pipe Diagonal Support Angle, 4.5Kg./mtr., each angle length 0.388mtr., 1 no angle required (1x4.5x0.388).Complete in all respect as per the specification and direction of EIC.

Supply & installation of Down Pipe Base Support Angle, 4.5Kg /mtr.,each angle length 0.34mtr., 1 no angle required n (1x4.5x0.340). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Isolator Support Side Cahnnel 100X50X6mm, 9.56 KG/Mtr., each channel length 0.5 mtr., 2 no's channel required =( 2x9.56x0.5). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Danger Plate, 2 no's.. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510). Complete in all respect as per the specification and direction of EIC.

Supply & installation of H.T. Stay clamp, 50x8 mm. flat, 3.14Kg/Mtr., 0.511 Mtr. Length 2 no's qty. required ( 1 Pair). Complete in all respect as per the specification and direction of EIC.

Supply & installation of H.T. Stay set (Complete). Complete in all respect as per the specification and direction of EIC.

Supply & installation of H.T. Stay Insulator Type-C(2 No's.). Complete in all respect as per the specification and direction of EIC.

Supply & installation of 7/8 SWG Stay Wire 15kg /stay. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Gi Pipe Earthing 40mm. 3 Mtr. Long. Complete in all respect as per the specification and direction of EIC.

Supply & installation of 50x6mm GI Flat for earthing, 2.36kg/mtr., (15 Mtr. For L A, 4 Mtr for Isolator Body, 2.5 mtr. For mesh formation and 2.5 mtr. For raising)= 24x2.36. Complete in all respect as per the specification and direction of EIC.

Supply & installation of GI barbed wire anticlimbing device 3 Kg. Per support. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 8 no's =(8x0.59x0.510). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Lightning_Arrester (30KV,10KA) (Station Class, cass-2). Complete in all respect as per the specification and direction of EIC.

Supply & installation of 33 KV 1250 AMP Double break (Turn & twist center rotating) isolator without earth switch with PI(Polymer). Complete in all respect as per the specification and direction of EIC.

Supply & installation of 33KV 1250 A ISOLATOR 25KA W E/S-SS BOX. Complete in all respect as per the specification and direction of EIC.

Supply & installation of 33KV pin insulator polymer. Complete in all respect as per the specification and direction of EIC.

Supply & installation of H W fitting(B&S) 90KN,4 Bolt. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Disc insulator (B&S)90 KN polymer. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Wedge Connector for 232 sq.mm AAA conductor . Complete in all respect as per the specification and direction of EIC.

Supply & installation of Paddle Clamp For Wedge Connector for 232 sq.mm AAA conductor. Complete in all respect as per the specification and direction of EIC.

Supply & installation of GI Nut . Bolt & Washer of different sizes. Complete in all respect as per the specification and direction of EIC.

Supply and painting of Black paint as required and direction of EIC.

Supply & installation of Poly Carbonate Bird Guard. Complete in all respect as per the specification and direction of EIC.

Supply and painting of Yellow colour paint for background as required and direction of EIC.

Part D- Cost of Civil Works.

Fixing of 33KV line Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts, including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size (500mmx500mmx800mm) using 20mm BHG metal with all labour and material (Excavation of earth will be done of size 500X500X1500 mm.).Complete in all respect as per the specification and direction of EIC.

Mass concreting of Pole ratio 1:1.5:3 (500mmX500mmX2200mm)= 0.55Cu.Mtr .Complete in all respect as per the specification and direction of EIC.

Couping with ratio 1:1.5:3 with dimension( 500X500X450)= 0.1125 Cu mtr. Complete in all respect as per the specification and direction of EIC.

Construction Earthing chamber including installation of earthing pipe. Making earthing chamber including excavation, soil treatment with bentonite powder, calculation of earth resistance including Installation of 3Mtr Gl pipe 40mm/50mm including welding of GI flat around pipe. Complete in all respect as per the specification and direction of EIC.

Part E- Construction of 4 No of 11 KV DP with Isolator and Earth Switch for 4 no of 11KV out going Feeders.

Supply and erection of WPB GI) Pole 160x152 (11Mtr. Long 30. 44KG/Mtr.). Including excavation of pole pit in all king of soil with depth upto 1/6th of pole height. Complete in all respect as per the specification and direction of EIC.

Supply and installation of Top Channel 100X50X6mm, 9.56 KG/Mtr. each channel length 3 mtr., 2 no's channel required =(2x9.56x3).Complete in all respect as per the specification and direction of EIC.

Supply and installation of Fish Plate 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required = (6x2.36x0.280). Complete in all respect as per the specification and direction of EIC.

Supply and installation of AB switch Mounting Channel 75X40X4. 8mm, 7.14KG/Mtr, each channel length 3 Mtr-. 2 no's channel required =( 7.14x3x2). Complete in all respect as per the specification and direction of EIC.

Supply and installation of AB Switch Side Support Channel 100X50X6mm,9.56 KG/Mtr., each channel length 0.35 mtr., 2 no's channel required )= (9.56x2x0.35). Complete in all respect as per the specification and direction of EIC.

Supply fabrication and installation of Channel Support for down Pipe 75X40X4.8mm., 7.14KG/Mtr., each channel length 0.8 Mtr. 1 no's channel required =(7.14x0.8x1). Complete in all respect as per the specification and direction of EIC.

Supply and installation of Double Pole Belting Channel 75X40X4.8mm., 7.14KG/Mtr., each channel length 3.0 Mtr.. 4 no's channel required =(7.14x3x4). Complete in all respect as per the specification and direction of EIC.

Supply & installation of 50x50x6mm. GI Bracing Angle, 4.5Kg./mtr., each angle length 3.512 mtr., 4 nos angle required = (4.5x3.512x4).Complete in all respect as per the specification and direction of EIC.

Supply & installation of Danger Plate, 2 no's.. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510). Complete in all respect as per the specification and direction of EIC.

Supply & installation of H.T. Stay clamp, 50x8 mm. flat, 3.14Kg/Mtr., 0.511 Mtr. Length 2 no's qty. required ( 1 Pair). Complete in all respect as per the specification and direction of EIC.

Supply & installation of H.T. Stay set (Complete). Complete in all respect as per the specification and direction of EIC.

Supply & installation of H.T. Stay Insulator Type-C. Complete in all respect as per the specification and direction of EIC.

Supply & installation of 7/8 SWG Stay Wire 15kg /stay. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Gi Pipe Earthing 40mm. 3 Mtr. Long. Complete in all respect as per the specification and direction of EIC.

Supply & installation of 50x6mm GI Flat for earthing, 2.36kg/mtr., (12.5 Mtr. For L A, 3 Mtr for Abswitch Body, 2.5 mtr. For mesh formation and 2.5 mtr. For raising)= 20.5x2.36. Complete in all respect as per the specification and direction of EIC.

Supply & installation of GI barbed wire anticlimbing device 3 Kg. Per support,2 nos qty required= (2x3kg). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Back Clamp for anticlimbing device 25X3 mm. Flat, 0.59Kg/Mtr. Flat of 0.510mtr length 8 no's =(8x0.59x0.510). Complete in all respect as per the specification and direction of EIC.

Supply & installation of Lightning Arrester (12KV,10KA) (Station Class, cass-2). Complete in all respect as per the specification and direction of EIC.

Supply & installation of 11KV 800A ISOLATOR ith E/S SS Box. Complete in all respect as per the specification and direction of EIC.

Supply & installation of 11KV pin insulator polymer. Complete in all respect as per the specification and direction of EIC.

Supply & installation of H W fitting(B&S) 70KN, 3 Bolt. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Disc insulator (B&S) 70KN polymer. Complete in all respect as per the specification and direction of EIC.

Supply & installation of Wedge Connector for 100 sq.mm AAA conductor. Complete in all respect as per the specification and direction of EIC.

Supply & installation of GI Nut . Bolt & Washer of different sizes. Complete in all respect as per the specification and direction of EIC.

Supply and painting of Black paint as required and direction of EIC.

Supply & installation of Poly Carbonate Bird Guard. Complete in all respect as per the specification and direction of EIC.

Supply and painting of Yellow colour paint for background as required and direction of EIC.

Supply, paving and Stringing of 100 sq.mm AAA conductor. Complete in all respect as per the specification and direction of EIC.

Part E- Cost of Civil Works.

Fixing of 11KV line Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts, BA will do the excvation including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size (500mmx500mmx800mm) using 20mm BHG metal with all labour and material as per TPCODL drawing & Standards.Complete in all respect as per the specification and direction of EIC.

Mass concreting of Pole ratio 1:1.5:3 (500mmX500mmX1800mm)= 0.45Cu.Mtr .Complete in all respect as per the specification and direction of EIC.

Couping with ratio 1:1.5:3 with dimension( 500X500X450)= 0.1125 Cu mtr. Complete in all respect as per the specification and direction of EIC.

Construction Earthing chamber including installation of earthing pipe. Making earthing chamber including excavation, soil treatment with bentonide powder, calculation of earth resistance including Installation of 3Mtr Gl pipe 40mm/50mm including welding of GI flat around pipe. Complete in all respect as per the specification and direction of EIC.

A.G. ENTERPRISES (BID ID -2771322)

AADYA URJA SOLUTIONS PRIVATE LIMITED (BID ID -2772422)

PABITRA ELECTRICAL WORKSHOP (BID ID -2748540)

AKHANDALAMANI ELECTRICALS AND CONSTRUCTION (BID ID -2752670)