Drilling of tubewell and providing and installation of single phase motor pumps at Piplinaka ward no. 2 in Ujjain city.

Drilling of perfectly vertical bore hole of a diameter suitable to receive 150mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 150mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. 20.4/255

in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. 20.4.1

in all types of rocks. 20.4.2

Drillingof perfectly vertical boreholeof 150mm diameteruptodesireddepthbelowgroundlevel in all typesof rock includingall workspertaining to drilling such as transportation, installation and removal of drilling machine etc. complete

Drilling of perfectly vertical bore hole of a diameter suitable to receive 125mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 125mm nominal diameter M.S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete. 20.2/254

in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc.

in all types of rocks.

Supply of I.S.I. markedG.I. casing pipe (Plain) medium class in 4 to 7meters length one end fitted with socket as per I.S.1239(Part-1&Part-2)1992 with IVth revision (Up-to-date amendments)

125 MM Dia

150 MM Dia

Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 2.5 Sq.mm multi strand 11.5.1/165 MPPHED SOR

Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor11.6/165 MPPHED SOR

Providing, laying, Jointing & field testing of PE pipes made from 100% virgin material (Earlier know as hight Density Polyethylene pipes, PE 100) conforming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 40 mm dia 10 Kg/cm2 2.1.1/32 MPPHED SOR

Providing and fixing following check (non-return) valves Class II, conforming to IS-778/1984 (Reaffirmed 2005) female ends, tested to 21.00 Kg/cm2. 40 mm dia 3.8.5/49 MPPHED SOR

Providing and fixing G. I. Bend 900 in G.I. Pipe line including cutting threading testing etc. complete (Old work) conforming to IS 1879 40 mm dia 3.27.5/54 MPPHED SOR

Please Enable Macros to View BoQ information