Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC NO 83 THAMMAIAH GARDEN ABBIGERE CHIKKABANAVARA PO BANGALORE 560 090 | BENGALURU URBAN | KARNATAKA | 560090 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹27.1 L+₹52,542.80 (1.98%)Rejected-Finance M S RRK PROJECTS D 306 ADG P CHENNAI 11 3RD CROSS SIR MV LAYOUT VIDHYARANYAPURA POST BANGALORE 560097 | BENGALURU URBAN | KARNATAKA | 560097 | L2 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 3 | L3₹28.3 L+₹1.8 L (6.73%)Rejected-Finance | L3 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 4 | L4₹29.2 L+₹2.7 L (10.1%)Rejected-Finance | L4 | Rejected-Finance Rejected. Quoted rates are higher than L1 | |
| 5 | L5₹32.2 L+₹5.7 L (21.3%)Rejected-Finance 1A BASEMENT 30 31 RAJA HOUSE NEHERU PLACE NEW DELHI | NEW DELHI | NEW DELHI | DELHI | L5 | Rejected-Finance Rejected. Quoted rates are higher than L1 |
Tender Value
Refer Docs
EMD Value
₹59,000
Closing Date
21 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer M AF Jalahalli
Garrison Engineer M AF Jalahalli Bangalore 560013
8711SPECIAL REPAIR TO LIGHITING INFRACTURE AT E ITI AND THREE PHASE POWER SUPPLY AT AFDC UNDER GE M AF JALAHALLI BANGALORE
2022_MES_553958_1
8711/E8
Open Tender
Electrical and Maintenance Works
Item Rate
152 days
Garrison Engineer M AF Jalahalli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF MAINT PUBLIC FUND ACCOUNT
₹59,000
19 Jan 2023
23 Sept 2022
24 Oct 2022
23 Sept 2022
21 Oct 2022
8 Oct 2022
23 Sept 2022 - 30 Sept 2022
Amount
Dismantling & taking down ACSR/AAC conductor of any size from LT over head line and removing from site complete all as specified and directed by Engineer-in-Charge.
Dismantling & taking down shackle/pin insulators of any size and type complete and removal from site complete all as specified and as directed by Engineer-in-Charge.
Dismantling & taking down cross arm, channel, angles, flat iron various size/shape incl nut, bolt and washers etc complete and removal from site complete all as specified and as directed by Engineer-in-Charge.
Dismantling & taking down GI guard wire of any size from LT over head line and removing from site complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in width and not exceeding 1.5 mtr in depth for laying of cables up to proper level complete all as specified and directed by Engr-in-charge.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed by Engr-in-charge.
Removing surplus excavated material from excavation not exc 50 meter and depositing where directed at a level not exc 1.5 meter above the starting point complete all as specified and directed by Engr-in-charge.
Material and labour for Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983 and as directed. Note :- Excavated approved soil shall be ribbed by using sieve to separate composite particles etc as per IS and refiiling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is than gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement only punned thickness only will be considered for paymet.
Material and labour for well burnt as class ‘B’ bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench complete all as speified and directed by Engr-in-charge.
Material and labour for 3 ½ core 185 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheather laying in trenches/cable ducts, fixed to wall/pole complete all as specified and directed
All as per item No 10 b ut 3 ½ core 240 Sqmm
All as per item No 10 but 3 ½ core 120 Sqmm
All as per item No 10 but 3 ½ core 70 sqmm
All as per item No 10 but 3 ½ core 50 Sqmm
All as per item No 10 but 3 ½ core 35 Sqmm
All as per item No 10 but 4 core 25 Sqmm
All as per item No 10 but 4 core 10 Sqmm
Material and labour for Boring of holes under road, pavement hard standings by trenches technology using ultra sound technique and necessary machine includings HDPE pipes of 100 mm dia suitable for 0.4 Mpa working pressure complete all as speified and directed by Engr-in-charge.
Material and labour for Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of plate not less than 1.5 m below ground level connected to and including galvanised earth strip of size 32x6 mm (up or 7.5 mtr length) and GI pipe 40 mm light grade for protection of GI earth strip by means of bolts, nuts, checknuts and washers made out of galvanised iron and connected to earth test point as shown in electrical plate No. 3 of SSR Part-1-2009 and as specified or indicated and testing on completion including excavation and earth work any in type of strata available at site, PCC (1:3:6) type C-1 for earth chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire fabric (xpm) weight not less the (4kg/sqm) funnel with GI watering pipe of 20mm bore medium grade, wire nuts and lugs complete all as speified and directed by Engr-in-charge.
Supply, Fabricate install test and commissioning of Bus bar box out door type totally enclosed dust and vermin proof floor mounting with hinged doors and locking arrangement front and back fabricated out of 3.15 mm thick CRCA sheet including powder coated paint finish including all accessories, provision independent removevable MS plates for fixing cable glands for all sutable for 300sqmm X3.5 core UG cable incomming and out going cables and complete control wiring with 2.5 sqmm copper conductor incuding necessary PCC foundation complete all specified and directed by Engineer-in-Charge. Note :- (1) Rates deemed to be included for suitable lugs and glands for incoming and out going of LT UG cable. (2) The Contractor Shall submit the drawing with sample of accessories for approval before executing the work. INCOMING (a) Aluminium busbar of capacity 400 Amps with eppoxy insulated supports 3 phase and neutral -1 set (b) MCCB 200 Amps 4 pole 36 KA with adjustable type - 01 No
Supply and fix for wiring to suitable street light fitting connection tapping from the line / connecting up from the junction box to the fitting etc with1.5 sqmm multistranded PVC insulated copper conductor including taking old cable all as directed. Note:-Two run of cable copper conductor and non metalic PVC Rigid/ flexiable conduit shall be measured as one unit length.
Supply and fix whether proof PVC junction box approved by CPRI street light control box made out of not less than 2mm thick of size 140mm x 140 mm x 5mm (approx) complete with hinged door locking arrangement and consisting of 2 Nos of suitable size cable glands consisting of 01 No panel mounted connector 4 pole 32A-1 No, MCB SP 6A 10KA-01No, including connecting up with the electrical connections and fixing and clamping complete and all as directed.
Material and labour for One light point controlled by one switch one way 5 Amps point wiring two runs of FRLS PVC insulated unsheathed, 1100 V Grade cable multi stranded copper conductor of size 1.5 sq mm drawing through in and including PVC conduit size of not less than 20mm on surface including provn of metal flush box duly sunkened with modular whit frame of suitable size for mounting modular switch, socket and regulator alongwith earth wire of PVC insulated, unseated, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed for under mentioned items. (Note : Cost of for cutting chesing and making good to disturbed surface all as to match with existing surface are deemed to be included in quote rate).
Supply and fix in replace of 25 watts, 230 V LED light fitting with suitable bracket with connected items complete for Building security LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK07.
Supply and layint of GI pipe light grade for cable protection of size 80mm bore complete with fitting complete all as specified and directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .