Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.3 L
EMD Value
₹4,640
Closing Date
25 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Revamping Electrical works in Vigilance Department of Industrial Health Center IHC HAL BC
9456
FM/NE-P/Advt./10/24-25 Dt:03.09.24
Works
Electrical Planning and Contract Section-E and M Dept-FMD-Bangalore
₹0
₹4,640
25 Sept 2024
4 Sept 2024
4 Sept 2024
25 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,
Address for correspondence:
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Cancelled cheque leaf to be uploaded)
PAN No.:
Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs:
Please Enter Turn over in Rupees for all the 3 years
Details of Registered Contractor
ESI No.:
GST Detail:
Please Enter GST Details
Related Document to be uploaded in ePortal
Contact details
Please Enter Contact person Name
Please Enter Mobile No
Valid Electrical contractor licence of appropriate voltage issued by any state Govt. under clause 45 of Indian Electricity Rules 1956 or as amended from time to time
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued within a period 12 months from the final date of submission of tender.
Please Enter Details to 'Name of the Bank' , 'Date of Issue','Value in C89``Rs. in Lakhs
Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender should be either of the following: [Work completion certificates along with LOA/PO/WO should be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender.
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Please Enter Details for Work No II
work done
Type of Work: [Incase of private works the same shall be supported with TDS certificate]
Please Enter Details for Work No III
Details of person holding the power of Attorney :
Related Document to be Uploaded to eProcurement Portal
Please Enter Details for Person holding Power of Attorney
DECLARATION I
Please Accept the Declaration I
DECLARATION II
Please Accept the Declaration II
The payment terms shall be governed as per the terms indicated in General conditions of contract.
Basic Rate to be quoted for each item.Subject work is called on works contract basis and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.
Sucessful offer that is L-1 (Lowest offer) will be determined including GST.
Amount towards GST will be paid along with RAR payment against invoice.
The tenderers are requested to abide by the rules of prevailing GST act.
This BOQ specification has to be read in conjunction with technical specifications and tender drawings. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.
Specification of item
Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Batten type 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 1 No of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.1XT8+LT8-20-865/Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.
Supply, fixing directly to the Lamp holder, testing & commissioning of 9W LED Bulb with base(B22 type), operating on single phase 230V voltage 50 Hz AC supply complete in all respect and as directed by OIC/EIC.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
Supply, installation, testing & commissioning of 250mm dia PVC fresh air fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories including necessary angle frame work for fixing the fresh air fan and making wall panel cutting / opening to fix fresh air fan with louvers, and making good finish around the wall opening both inside & outside etc., complete in all respects and as directed by Engineer-in-charge.
DB & MCB'S, PANELS
4 way (4 + 12), Double door VPTN MCCB DB
63 amps. ratings , 4P MCB, "C" curve, 10 KA breaking capacity.
Supply and fixing 6A to 32 A rating, SP 214V 10kA, "C" curve, miiniature circuit bracker suitable for inducive load of following poles in the exesting MCB DB complete with connections, testing and commessioning etc., as required.
Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring).
Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to two light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.
Wiring to fan point controlled by 1 No. 6A, 250V gr. flush type modular SP switch including providing 1No box type MS/GI Fan hook in ceiling whereever required, 2 module type electronic five stepped speed regulator etc., complete in all respects.
Wiring to exhaust/wall mounting fan point using 6A, 250V gr. flush type modular SP switch housed along with other lighting switches/separate switch box if required and 3pin 6A, 250V gr. modular type socket housed near the exhaust fan complete in all respects.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI Box with modular plate and cover on front on surface or in recess, including providing and fixing 2Nos of 3 pin 5/6A modular socket outlet and one No 5/6 A modular switch, connections etc.,
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
3 x 4 sq. mm (For 16Apower points)
Telephone
Supplying and fixing of Telephone socket outlet on the existing modular plate & switch box including connections but excluding modular plate & box etc. as required.
Supply & drawing of 4 Pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telecommunication cables in the existing surface / recessed PVC conduit as required.
Supply & fixing of 2nos of 2 Module RJ-45 sockets for Two numbers of Data points on the existing modular plate & switch box including connections but excluding modular plate & box etc. as required.
Supply and drawing of UTP 4pair CAT 6 LAN Cable in the existing surface / recessed PVC conduit as required.
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
2 Module
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
3.5C x 25 Sqmm.Al Arm LT cable end joint.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Tender_Notice_ER2935.pdf
TENDER_DOCUMENT • 0.46 MB
Pre_Qualification_ER2935.xlsm
TENDER_DOCUMENT • 0.03 MB
PB_Freeview_2935.pdf
TENDER_DOCUMENT • 0.28 MB
Undertaking_Letter_ER_2935.pdf
TENDER_DOCUMENT • 0.26 MB
Chick_List_ER2935.pdf
TENDER_DOCUMENT • 0.09 MB
Tender_Drawing_No_01_ER2935.pdf
TENDER_DOCUMENT • 0.38 MB
Technical_Bid_2935.pdf
TENDER_DOCUMENT • 2.83 MB
PQ_Freeview_ER2935.pdf
TENDER_DOCUMENT • 0.21 MB
Price_Bid_ER2935.xlsm
TENDER_DOCUMENT • 0.07 MB
ECS_Format_ER2935.pdf
TENDER_DOCUMENT • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .