SPL REPAIR OF SEWAGE LINES AND CONNECTED WORKS FROM CAMP AREA COOK HOUSE TO GATE NO 03 AT GROUND AREA OF CPG UNDER GE (EAST) DELHI CANTT-10

Amount

Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc, or for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Eacavation in trenches n exc 1.5m wide and exc 1.5m but not exc 3.00m in depth for foundation etc, or for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.

Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.

M & L for 300 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete Including demolition and breaking up drain pipes (SGSW/ AC/RCC) set in cement mortar including removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.

M & L for 450 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete Including demolition and breaking up drain pipes (SGSW/ AC/RCC) set in cement mortar including removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.

M & L for 600 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested Including demolition and breaking up drain pipes (SGSW/ AC/RCC) set in cement mortar including removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 300 mm bore incl forming cradles complte all as specified and directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 450 mm bore incl forming cradles complte all as specified and directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 600 mm bore incl forming cradles complte all as specified and directed.

M&L for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete all as specified and as directed.

S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592 of any shape and size as per requirement at site and as directed including demolition of existing manhole covers of any type complete all as specified and as directed.

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair in any position incl scafolding etc, complete all as specified and as directed.

M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel/concrete surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L for preparation of new plaster external wall surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and 1mm thick wall care putty over new surfaces complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of existing PCC complete all as specified and as directed.

M & L for Coloured Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6 including dismantling of existing chequired tiles complete all as specieied and as directed.

M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 80 mm thick, M-40 Grade with grey cement and pigment laid dry in floor/path including dismantling of existing interlocking tiles complete all as specieied and as directed.

M & L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required (Size and pattern as approved by GE) and including demolition of old existing kerb stone of any type and size etc complete all as specified and as directed.

M & L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over and incl 15mm thick rendering in CM 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding including dismantling of existing granite of any type complete all as specified and as directed .

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing Plain or corrugated AC Sheet, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

M & L for Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete including dismantling of existing stone sett flooring of any type complete all as specified and as directed.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, including demolition of existing Plinth protection (PCC) complete all as specified and as directed.

M & L for Mild steel rolled sections Fe-410-W (Gde-E-250) quality B as in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and as directed.

Dismantling old posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground.

M/s Shubh Enterprises

Akhil Enterprises

STAR CONSTRUCTION CO

VIKRANT CONSTRUCTION CO.

garnet engineers contractors

Vipul Construction

M/s Sree Baba Traders