Tender Document for Laboratory Furniture of PRTL, Jalandhar

5 FEET BENCH TOP FUME HOOD INSERT TYPE GRANITE WORKTOP

5 FEET BENCHTOP HOOD SWINGING TYPE FRONT PANEL COMBINATION SASH, SASH OPENING 28", 30" INTERNAL DEPTH, 60" LENGTH, PHENOLIC RESIN LINER, WITH INSERT TYPE WORKTOP

5 FT FUME HOOD CEILING ENCLOSURE WITH ACCESS DOOR, SIZE:18H x 30D x 60L, CF FOR COMBINATION SASH HOOD,HEIGHT UP TO FALSE CEILING

BASE UNIT FH GENERAL 2 DOOR-35Hx22Dx30L, LV=WITH VENT HOLE AND LOUVERS, 1 NUMBER ADJUSTABLE SHELF, WITH 2 NUMBERS PP TRAY (FOR BOTTOM AND INTERMEDIATE SHELF)

EPOXY LATTICE ASSMBLY FOR 5' BENCHTOP FUMEHOOD

FLOOR STANDING WORKTOP SUPPORT OF SIZE: 35Hx08L

FUME HOOD MICROPROCESSOR BASED AIRFLOW MONITOR AND ALARM -VERTICAL - C/W SM7 SENSOR, SUITABLE POWER ADAPTOR

FUMEHOOD ELECTRICAL SYSTEM-3+3 NOS 6/16A SOCKETS WITH SWITCH, NON FLAME PROOF LIGHT FIXTURE ALONG WITH LED & 15 INTENSITY WITH 3 COLOR SETTINGS CONTROL SWITCH, FUMEHOOD DB AND INTERNAL WIRING WITHIN THE HOOD

FUMEHOOD FRONT CONTROL VALVE FOR COMPRESSED AIR

FUMEHOOD FRONT CONTROL VALVE FOR NITROGEN

FUMEHOOD FRONT CONTROL VALVE FOR RAW WATER

FUMEHOOD FRONT CONTROL VALVE FOR VACUUM.

FUMEHOOD SS304 INTERNAL TUBING UNTIL 150MM ABOVE THE HOOD WITH CAPPED END ( 1/2 FOR VA)

FUMEHOOD SS304 INTERNAL TUBING UNTIL 150MM ABOVE THE HOOD WITH CAPPED END ( 1/4 FOR N2,CA)

FUMEHOOD SS304 INTERNAL TUBING UNTIL 150MM ABOVE THE HOOD WITH CAPPED END (1/2 FOR RW).

PP CUPSINK 3x6x4

REAR SCRIBE - 57Hx00Dx05L

REAR SCRIBE-18Hx00Dx5L, H=HEIGHT UP TO FALSE CEILING

REAR SCRIBE-35Hx00Dx18L

Total Amount (Excluding GST)

Company Name:

Signatory Name:

PUNJAB BIOTECHNOLOGY INCUBATOR

FINANCIAL BID FORMAT

BOQ2 - LAB FURNITURE AND ACCESSORIES

10 MM THICK ACRYLIC SPLASH GAURD WITH SUPPORT SIZE: 18"Hx 35"L

18/19mm THK. GRANITE MARINE EDGE IN RFT

18/19mm THK. GRANITE WORKTOP IN SFT

2 PORT CAT 6A INFORMATION OUTLETS WITH POLYCARBONATE I/O FACE PLATE (DATA)

6/16A, 6M, BENCH MOUNT, 2NOS OF SOCKET & 2NOS OF SWITCH WITH POLYCARBONATE FRONT PLATE FOR NORMAL AREA (RAW POWER)

6/16A, 6M, BENCH MOUNT, 2NOS OF SOCKET & 2NOS OF SWITCH WITH POLYCARBONATE FRONT PLATE FOR NORMAL AREA (UPS POWER)

6/16A, 8M, BENCH MOUNT, 3NOS OF SOCKET & 1NOS OF SWITCH WITH POLYCARBONATE FRONT PLATE FOR NORMAL AREA (UPS POWER)

ACRYLIC PEG BOARD WITH 23 PEGS WITH SS 316L TRAY, 610L x 610mm(H) WITH 90 DEGREE BEND TUBE UPTO SINK

ADJUSTABLE END SCRIBE-29Hx00Dx06L

ADJUSTABLE END SCRIBE-29Hx00Dx07L

ADJUSTABLE END SCRIBE-29Hx00Dx12L

ADJUSTABLE END SCRIBE-35Hx00Dx06L

ADJUSTABLE END SCRIBE-35Hx00Dx07L

ANTI SIPHON BOTTLE TRAP

ANTIVIBRATION TABLE SIZE: 29Hx24Dx 36L, MADE UP OF 80mm x 80mm TUBULAR FRAME WITH 80mm THICK GRANITE TOP, VIBRATION PADS. ACCURACY LEVEL UPTO 4 DECIMAL POINTS, WITH COVERING PANEL

ANTIVIBRATION TABLE SIZE: 35Hx24Dx36L, MADE UP OF 80mm x 80mm TUBULAR FRAME WITH 80mm THICK GRANITE TOP, VIBRATION PADS. ACCURACY LEVEL UPTO 4 DECIMAL POINTS, WITH COVERING PANEL.

APRON RAIL-04Hx02Dx30L

BASE CABINET FINISHED BACK WITH SLIDING DOOR-29Hx02Dx36L

BASE CABINET FINISHED BACK WITH SLIDING DOOR-29Hx02Dx48L

BASE CABINET FINISHED BACK WITH SLIDING DOOR-29Hx02Dx60L

BASE MOLDING 4 FT.

BASE UNIT 1 DOOR 1 DRAWER-29Hx22Dx24L

BASE UNIT 1 DOOR 1 DRAWER-35Hx22Dx24L

BASE UNIT 1 DOOR-35Hx22Dx24L, WITH RECESS PANEL

BASE UNIT 2 DOOR 1 DRAWER-29Hx22Dx30L

BASE UNIT 2 DOOR 1 DRAWER-35Hx22Dx30L

BASE UNIT 2 DOOR 1 DRAWER-35Hx22Dx36L

BASE UNIT 2 DOOR-35Hx22Dx30L, WITH RECESS PANEL

BASE UNIT 2 DOOR-35Hx22Dx36L, WITH RECESS PANEL

BASE UNIT SINK 2 DOOR-35Hx22Dx30L, WITH PP TRAY

BASE UNIT-BLIND CORNER-1 DOOR-29Hx22Dx48L

BASE UNIT-BLIND CORNER-1 DOOR-35Hx22Dx48L

BENCH MOUNT 12" DOUBLE SIDED COLUMN, SIZE: 24Hx12Dx02L, POWDER COATED ACCEENT STRIP & BENCH MOUNTED,SINGLE SIDE ERMD RACEWAY CUTOUT

BENCH MOUNT 12" DOUBLE SIDED COLUMN, SIZE: 24Hx12Dx02L, 1=POWDER COATED ACCEENT STRIP & BENCH MOUNTED,DOUBLE SIDE ERMD RACEWAY CUTOUT.

BENCH MOUNTED 1-WAY WATER FITTING WITH 8" RIGID/SWING GOOSENECK WITH AERATOR FOR RAW WATER

CABLE MANAGER DIA 2.5, BLACK COLOR

CAT 6A INFORMATION OUTLETS WITH POLYCARBONATE I/O FACE PLATE (DATA)

CEILING BRACKET FOR SPOT EXTRACTOR 4x4x38

CEILING MOUNTED PP SPOT EXTRACTOR WITH 15 DIA PP HOOD

CORNER CLIP

DECK MOUNTED DOUBLE HEAD EYE WASH/DRENCH

DOUBLE SIDE SOCKET BOX 04Hx08D

DOUBLE SIDED METAL ELECTRICAL RACEWAY, 05Hx06D

END SCRIBE-29Hx00Dx04L

END SCRIBE-35Hx00Dx04L

GLASS REAGENT SHELF 12x42, SS 316L RETAINING ROD

GLASS REAGENT SHELF 12x43, SS 316L RETAINING ROD

GRANITE SKIRTING. 4x1

KNEE SPACE PANEL-25Hx00Dx30L

KNEE SPACE PANEL-31Hx00Dx30L

L-ANGLE FOR WORKTOP SUPPORT, SIZE: 07Hx07L

METAL ELECTRICAL RACEWAY, 05Hx03D

MS STAND FOR SAFETY CABINETS SIZE=126MM (H) x 863mm(D) x 863mm(L), EXACT DIMENSION AS PER SAFETY CABINET SIZE

OPEN RACK WITH 5 SHELVES, SIZE: 84Hx22Dx36L WITH 4 SIDE METAL LIPPING

PP SINK, SIZE: 600Lx450Dx315Hmm AND BOWL SIZE: 550Lx400Dx315Hmm

REAGENT WORKTOP SUPPORT 12x42

REAGENT WORKTOP SUPPORT 12x43

REAR PANEL SUPPORTING BRACKET 229mm L

REAR SCRIBE-29Hx00Dx04L

REAR SCRIBE-29Hx00Dx05L

REAR SCRIBE-29Hx00Dx09L

REAR SCRIBE-29Hx00Dx11L

REAR SCRIBE-29Hx00Dx13L

REAR SCRIBE-29Hx00Dx14L

REAR SCRIBE-35Hx00Dx13L

REAR SCRIBE-35Hx00Dx14L

REDUCING COUPLER IN PP 51 X 31MM + PP PIPE LENGTHS - ONE FEET LENGTH - DIA. 38MM

SAFETY CABINET FOR SOLVENT STORAGE 60 GAL (FM)(SELF CLOSE) SIZE: 65(H)x34(D)x34(L).

SERVICE ENCLOSURE -12x6x112

SINGLE SIDE DATA SOCKET BOX, 04Hx04Dx06L

SINGLE SIDE SOCKET BOX 04Hx04Dx12L, WITH 6 MODULE CUTOUT

SINK SUPPORT KIT FOR 30" CABINET

TALL UNIT CEILING ENCLOSURE ASSEMBLY 24Hx22Dx36L, HEIGHT UNTIL FALSE CEILING

TALL UNIT CEILING ENCLOSURE ASSEMBLY 24Hx22Dx36L, HEIGHT UNTIL FALSE CEILING,FINISHED BACK

TALL UNIT SWINGING GLAZED - 84Hx22Dx30L

TALL UNIT SWINGING GLAZED - 84Hx22Dx36L

TALL UNIT SWINGING PANEL WITH VENT HOLE AND LOUVERS HAVING 5 NOS. OF HEIGHT ADJUSTABLE SHELVES AND 6 NOS. OF PP TRAYS- 84Hx22Dx36L

WALL CABINET HANGING RAIL FOR 24" CABINET

WALL CABINET HANGING RAIL FOR 30" CABINET

WALL UNIT SWINGING GLAZED - 24Hx13Dx24L

WALL UNIT SWINGING GLAZED - 24Hx13Dx30L

WASTE, 1 1/2" BSP X 76mm

Total Amount (Excluding GST)

Company Name:

Signatory Name:

PUNJAB BIOTECHNOLOGY INCUBATOR

FINANCIAL BID FORMAT

BOQ3 - EXHAUST SYSTEM WITH ACCESSORIES

PP moulded 100mm dia. single leaf Butterfly Manual damper with Both side flanges

PP moulded 150mm dia. single leaf Butterfly Manual damper with Both side flanges

PP moulded 200mm dia. single leaf Butterfly Manual damper with Both side flanges

PP moulded 250mm dia. single leaf Butterfly Manual damper with Both side flanges

PP moulded 300mm dia. single leaf Butterfly Manual damper with Both side flanges

100 Dia Aluminium flexible hose with 150 Dia. Clips for Solvent Equipment

150 Dia Aluminium flexible hose with 200 Dia. Clips for ICPMS Hood

160mm Dia Aluminium flexible hose

200mm Dia Aluminium flexible hose

22 Guage welded GI ducting of Galvanising thickness shall be 120gms/sq.m.(total thickness). the duct fabricattion and shall be as per SMACNA Standard. all ducts are with Both side Corrosion resistant epoxy Powder coating. Ducting to include all fittings like branches, y pieces, elbows, Tee, flanges,threaded rod, rubber lined clamps, anchor fasteners, washer nuts and bolts with MS supports, gaskets

25x25x14g thk GI Bird mesh for dia 100 Bypass end connection, refer drawing

25x25x14g thk GI Bird mesh for dia 100 mm Bypass end connection, refer drawing

25x25x14g thk PP Bird mesh for dia 300 mm Bypass end connection, refer drawing

40 mm PP Slip x Slip x Slip Tee

40mm CTS Slip x MPT Male Adapter 50mm with Chuck Nut

40mm CTS 90-Degree Slip x Slip Elbow

40mm. x 2500mm PP Exhaust Pipe

Dia 400mm and 3mm thickness PVC Transparent flexible connection for inlet & outlet of the blower, refer cluster details.

Fumehood Base cabinet vent connection & Accessories

G1 M8x50 bolts with nuts & washer (Motor and Blower pedestal)

GI 20 Guage 100mm dia. single leaf Butterfly Manual damper with both side flanges with both side epoxy powder coating. For bypass & solvent cabinets

GI 20 Guage 150mm dia. single leaf Butterfly Manual damper with both side flanges with both side epoxy powder coating. For bypass & ICPMS

GI Weather cowl Dia 200 mm, ( 0.54 Sqmts ). Moc:- GI 20 guage

GI Weather cowl Dia 200 mm, ( 0.80 Sqmts ). Moc:- GI 20 guage

M10x100 pin type anchor fasteners

Medium Pressure Direct Driven PP Centrifugal Blower (2650-4500cfm @40-120mm static) with clamp adapter, Electro galvanized stand base frame and fasteners. Refer Cluster details.

Motor 5.5KW/4P TEFC B5/Flange mounted 3phase 50Hz, IE3.Terminal box should be on top side. Motor Shall be compatible for VFD Operation. Refer Cluster details.

Motor Guard with accessories for 0.75KW, refer motor capacity

Motor Guard with accessories for 5.5KW, refer motor capacity

MS Stack support for Centrifugal Blower, ( Kg:- 120 Kgs )

MS Stack support for MS Blower, ( Kg:- 65 Kgs )

MS Stack support for MS Blower, ( Kg:- 70 Kgs )

MS Support for Ducts like threded rod,anchor bolts, c-chanels, clamps, angles, bolts & nuts. Inside lab, within Shaft & outside the building.

PP Weather cowl Dia 400 mm, (1.90 Sqmts )

PP-FRP ducting using 3mm thick PPGL sheets 3mm thick FRP lining using isothelic resin including flanges & bends, gasket, support with threaded rod, clamps, anchor fasteners, washer nuts and bolts including UV resistant painting.

PVC Coated Collapsable hose 100mm Dia with 150mm Dia Clips.

PVC Coated Collapsable hose 300mm Dia with 350mm Dia Clips.

Rubber Pads 150x150x12 Thk. Anti vibration, serrated rubber pads

SISW Direct Driven MS Centrifugal Fan - MS Blower (500 CFM @ 50 mm Static pressure ) including suitable clamp adapter, Electro galvanized stand and fasteners like bolts, nuts and washers , base frame, vibration isolators along with IE3,FLP- 0.75kw/2P, 63A standard motor. (Consider Flame proof motor)

SISW Direct Driven MS Centrifugal Fan - MS Blower (600 CFM @ 60 mm Static pressure ) including suitable clamp adapter, Electro galvanized stand and fasteners like bolts, nuts and washers , base frame, vibration isolators along with IE3, 0.75kw/2P, 63A standard motor.

Vertical single stage packed bed scrubber with integrated water tank. The scrubber capacity is 3250-4200 CFM and made up of PP+FRP material. The approximate size shall be 1200 mm dia & 4000mm ht, complete with packing material,. mist eliminator, inspection window and MS ladder with handrail. Provision for Makeup Water connection with control Valve, Water Level Indicator, provision for Drain connection with Control Valve, Over Flow Pipe with float valve. Scrubber Recirculation Pump with inlet Flange with Y-Strainer, ball valves, Outlet Flange with NRV, Ball Valve. Complete recirculation piping with suitable supports. Inlet and outlet flange for duct connections with gasket and Bolt Nuts. Vertical Seal less Scrubber Pump with enclosure suitable for 117 Lpm flow, 2HP X 1 , 3phase 50Hz, 415Volts. Provision for Dosing connection if any with Valve, Scrubber Mounting Bolt & Nuts. The operating Temperature is upto 60deg C (max.) and Pressure drop across the scrubber shall not be more than 600Pa (approx.). Make up water connection and drain connection shall be in client scope.

Vibration Isolators

Total Amount (Excluding GST)

Company Name:

Signatory Name:

PUNJAB BIOTECHNOLOGY INCUBATOR

FINANCIAL BID FORMAT

BOQ4 - GAS & UTILITY DISTRIBUTION SYSTEM

INLET

CYLINDER MANIFOLD BOQ

Gas Cylinder Holding Structure/ Frame for 1+1 Cyl. MS Enamel Coated

Cylinder Bracket with chain-MS

Nut Bullnose with Sintered Filter inside-SS 316-1/4" NPTM

Check Valve with Cracking Pressure 11 PSI-SS 316-1/4" FNPT x 1/4" OD

Braided flexible hose/Pigtail with Safety Ropes and end fittings as per respective gas Service: Pressure : 250 Bar-SS 316-1/4" OD x 1/4" OD

Gas Particle filter 0.2-0.4 µm-SS 316-1/4" OD

High Flow Semi Auto Changeover Panel for 2 cylinder with PRV 1/4" NPTF PurMSng System-1/4" NPTF) (Flow : 350 LPM)-Brass Nickel Chrome plated Inlet Pr. 150 bar Outlet Pr. 14 bar along with mounting plate

Panel inlet connector

Panel outlet connector

Purge gas outlet connector

2 Way Straight Pattern Ball type shut off Valve-SS 316- 1/4" OD

100mm dial Pressure Gauge with isolation plug valve with measuring range from 0 to 30 bars on main scale. The reading should be in bars and psig-SS 316- 1/4" NPTM

Female Connector

Pressure Relief Valve-SS 316- 1/4" OD

Non Return Valve-SS 316- 1/4" OD

Flash back Arrestor with accessories -SS 316-1/4" OD x 1/4" OD @ Max inlet Pr. 14 Bar

Equal Tee- SS 316-1/4" OD x 1/4" OD

Seamless Tube-SS 316-1/4" OD, 0.035" Wall thickness

Lab Gas Piping and Accessories

Source Connector

2 Way Straight Pattern Ball type shut off Valve-SS 316- 1/2" OD

2 Way Straight Pattern Ball type shut off Valve-SS 316- 1/4" OD

Secondary Pressure Line Regulator with Inlet & Outlet Pressure Gauge (Flow:150 LPM) along with Mounting plate-Brass Chrome plated- 1/4" FNPT x 1/4" FNPT Inlet Pr. 14 bar, Outlet Pr. 0-10 bar

Regulator Connector

Gas Purification Panel inclusive of Moistre trap, Hydrocarbon trap, Oxy trap --SS 316-1/4" OD

Bench Mounted/Point Of Use Regulator with Connector

Bench connector/Equipment connector

Fume hood connector

Pressure Gauge 63 mm Dia with isolation valve, tees and connectors

Vacuum Gauge 63 mm Dia with isolation valve, tees and connectors

Equal Tee- SS 316-1/4" OD OW x 1/4" OD OW

Equal Tee- SS 316-1/2" OD OW x 1/2" OD OW

Seamless Tube-SS 316-1/2" OD, 0.049" Wall thickness

Seamless Tube-SS 316-1/4" OD, 0.035" Wall thickness

Box Clamp with TE nut & SS Allen Screw - Polypropylene- 1/2"

Box Clamp with TE nut & SS Allen Screw - Polypropylene- 1/4"

Pipe identification tag-Acrylic

Anchor fastner 10mm with 10mm stud rod, nuts, washers & accessories-MS-1.5 mtr length

Powder coated profile with end caps-MS-41mm x 41mm x 2mm thk

Gas Bank Shed with necessory accessories

MS Supports

Total Amount (Excluding GST)

Company Name:

Signatory Name:

PUNJAB BIOTECHNOLOGY INCUBATOR

FINANCIAL BID FORMAT

BOQ5 - RAW WATER DISTRIBUTION SYSTEM & ACCESSORIES

Piping & Accessories

Supply, laying, joining, testing and commissioning of CPVC 4120 SDR 11/SCH40 plastic pipe as per ASTM D-2846/ASTM F 441 pipeline with necessary slope. The rate quoted shall include for (All fittings shall be SCH40 as per ASTM F439)necessary Unions,Reducer,Coupling,Tee, Reducer tee, Elbow, Male adapter, Female adapter, End cap, Brass couplings, Flange, Gaskets, clamps Male/Female Adapter brass threaded coupling, Adhesives solution(ASTM F-493), Wall bores cutting through walls, U clamps etc. as per dwg to be considered for all sizes of every 1.5 mts distance. Note: Mode of Pipe measurement will be centreline measurement without any additional measurement for bends, Tee, reducers and fittings, supports etc.

Supply, erection,testing & commissioning of CPVC ball valves with end connections of approved make as per detailed specification with bolts, nuts, gaskets, washers, etc.(as per attached specification).

Supply of Box Clamp Engineering, Procurements of materials, Packing, Loading, Transportation from Vendors Works to Site, Delivery & Unloading at site of Supports for tubes and pipes. The Package shall consist of the following:

CPVC+Brass Source Connector & Auto clave connector

63mm dial Pressure Gauge with isolation plug valve with measuring range from 0 to 15 bars on main scale. The reading should be in bars and psig-SS 316- 1/4" NPTM

Sink connector

Eye wash connector

Fumehood connector

Total Amount (Excluding GST)

Company Name:

Signatory Name:

PUNJAB BIOTECHNOLOGY INCUBATOR

FINANCIAL BID FORMAT

BOQ6 - DRAINGAE SYSTEM & ACCESSORIES

Supply of PPR Pipe Complete with necessary slope and fittings specials like flanges, P-Trap,Drain Trap As per site suitable material like SS304, SS316,PPR end cap, bends, collar, Equal Tee, Reducing Tee, Y-type Tee, gaskets, bolts, nuts, Tagging(Acrylic), washers, unions, heat welding,etc.The rate quoted shall include for necessary wall bores cutting through walls, column, pipe clamps & supports(including required size of anchor fasteners type, Threaded Rods, " U " Clamp & Universal GI clamps with necessary bolts, washer and nuts, suspended in ceiling and Roof slabs etc.) to be considered for all sizes of every 1 mts distance, including earth excavation, chipping of concrete for 150mm & finishing the same with necessary cement works etc.

Total Amount (Excluding GST)

Company Name:

Signatory Name:

PUNJAB BIOTECHNOLOGY INCUBATOR

FINANCIAL BID FORMAT - OPTIONAL ITEMS

BOQ7 - GAS LEAK DETECTION & LOW GAS SYSTEM

Gas Detectors Control and alarm panel (8 Channel): Micro-controller based scanner type monitor. digital display for easy to read gas concentration online on monitor with two window display for channel assessment and actual value of gas analyses per channel. acknowledge function with user friendly operation & programmable by easy soft Key a) Output: two high and low common relay for alarm b) Input supply: 230 VAC For single channe

Hydrogen Gas Detector without display: 3 wire gas transmitter with LED display, 4-20mA output in flameproof enclosure with catalyst sensor for combustible gas. a) Gas to be detected : Hydrogen OR Methane OR Acetylene OR Hydrocarbon OR LPG b) Range : 0 to 100% LEL c) Output: 4 to 20 mA d) Supply voltage: 24V DC e) Detection principal: Catalytic pellistor f) Sensor body: SS316 g) Enclosure: IIC enclosure h) Mounting: Wall mounting OR stand mounting

Oxygen Gas Detector without display : 3 wire gas transmitter flameproof CMRI tested a) Gas to be detected: Oxygen b)Range : 0 to 25% V/V c) Detection method : Electrochemical d)Display : 2-Line e) Digit 8 mm (H) seven segment 8 LEDs to indicate status of instrument f) Setting : By using magnetic pen without opening cover g) Supply voltage : 18 TO 36 VDC, typically 24V DC h) Standard output : 4 to 20 MA current output i) Error detection: During sensor break Or open display shows SENSOR OPEN & during over range display shows OVER RANGE j) Operating temperature: -15 Deg C to +55 Deg k) Protection class : IP-66 l) Cabinet material: Cast aluminium alloy, LM-6

3 Core x 1.5 Sqmm Cable

2 Core x 1.5 Sqmm Cable Power supply - Armoured Copper Cable

Flame proof cable gland

PVC Conduite with clamps, fasteners & accessories with necessary lugs

50 mm width

Tower type Hooter cum flasher : a) Input supply : 24 V DC / 230 V AC b) Output : 100 dB c) Enclosure : Weatherproof d) Dimension : 96 X 96 mm e) Mounting : Wall mounting

Low Gas Annunciator panel with mounting bracket-8 Channel

Junction Box to integrate input signal from contact gauges to LGA panel

Contact gauges

Cable Tray along with stud rods, anchor bolts, washers, saddle clamps, nuts and complete accessories as per site requirements

Total Amount (Excluding GST)

Company Name:

Signatory Name:

PUNJAB BIOTECHNOLOGY INCUBATOR

FINANCIAL BID FORMAT

Designing, supply, installation, testing and commissioning of laboratory furniture, fume & distillation hoods and laying other allied services on TURN KEY basis for Pesticide Residue Testing Laboratories of DoA&FW, Punjab being setup at Jalandhar, Punjab

Total Amount (BOQ1+BOQ2+BOQ3+BOQ4+BOQ5+BOQ6+BOQ7)

GST Amount

Packing forwarding + Freight & Insurance, if any

Any Other, if any

Net FOR Amount Including All (GST + PF + FI etc.)

1. Bidder must quote amount in the given cells, if amount against any cell is included in main component, bidder should put "Zero" value.

2. Taxes must be mentioned, if it is not mentioned, the same shall be treated as included in given rates.

3. This is to certify that the rates quoted above are not more than the rates charged from any Institution/Department/Organization

4. Keeping in view the availability of Funds, optional items can be included in purchase order.

5. Financial Comparison shall be carried out based upon the FOR value of All item including the cost of optional items & other obligations.

Company Name:

Signatory Name: