PROVN OF PERIMETER LIGHTING AT ARJAN AREA AND PROVN OF PLUG SOCKET WITH SUBMAIN WIRING AT AFS HASI MARA

Excavation in trenches not exceeding 1.5 metre wide and not exc. 1.5 metre in depth for foundation of pole / stay, or cable trenches and getting out in soft/loose of any type of soil, complete all as specified and as directed.

Returning filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm in soft loose of any type of soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of cross sectional area 25 Sqmm 3.5 core, complete all as specified and directed. Note : Cable protection pipe/cable cover, etc shall be measured and paid seperately.

All as per item No 4.00 here-in before but cross sectional area 70 Sqmm, 3.5 core, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm outer dia, heavy duty, conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

Supply, installation and testing of 8 meter HOT DIP galvanised octagonal steel poles, as per IS 4759 : 1996 / IS 2629 : 1985, including 1200mm inbuilt double armed bracket, 3mm section thickness, top dia 70mm, bottom dia 135mm, base plate 225 x 225 x 16mm and its accessories, including PCC foundation & foundation bolts as per OEM recommendation, complete all as specified and directed.

Supply and fixing LED street light fitting 70 watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, complete all as specified and directed. Note :- 1. The contractor should submit technical literature of proposed make alongwith LM-80 and LM-79 test report from NABL accredited lab during approval of sample. 2. BIS approved silicon gel field potted driver of same OEM for vibration device to be considered. 3. 10 KV surge protection device shall deemed to be in the unit quoted rate. 4. System efficiancy of LED light fittings should be grater than 120 lumen/watt

Supply, fabrication, installation, testing and commissioning of outdoor type LT feeder pillar box of size 1000(H) x 900(W) x 400(D)mm, factory fabricated, wall/floor mounted double door, dust and vermin proof CPRI approved inner parts made of 2.00mm thick CRCA sheet and outer shell of 3.15mm thick CRCA sheet, having rain canopy type, four side slop top, suported on 50 x 50 x 6mm angle iron base frame and legs of 500mm height, painted with texured powder coated paint of thickness not less than 100 micron, after preparation of surface in 8 tanks sheet process system with copper bus bar & strips of size 200 Amp all outgoing switchgears shall have extended strips or extended wire with terminals for easy and comfortable outgoing connection, front and back apenable including locking arrangement including suitable size copper conductor control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation including PCC foundation as per OEM recommendation, with and including the following accessories :- INCOMING: (i) MCCB 100 Amps, AC, 4 pole 415 Volt, 25 KA Breaking capacity, Ics = 100% Icu, 50 Hz with thermal magnetic release range 100A, with suitable rotary extendable handle for operation of MCCB-01 No. (ii) CT's 500 /5 Amp - Set of three. (iii) Digital multi function Meter 0- 500 Volt (4405 series) - 01 No. (iv) RYB Indicating (LED) lamps -03 Nos. (v) MCB SP 6 Amp 'C' curve, 10 KA - 03 Nos. OUTGOING: (i) MCCB 63 Amps, AC, 4 pole, 415 Volt, 36 KA breaking capacity, Ics = 100% Icu, 50 Hz with thermal magnetic release range 63A, with suitable rotary extendable handle for operation - 03 Nos. (iii) Astro time switch - 02 Nos. (iv) 3 pole power contactors type MNX - 02 Nos. (v) Auto manual selector switch -02 Nos. (vi) Terminal 4 pole 63A - 03 Nos.

S& F lP 66 'Weatherproof” Thermoplastic Polycarbonate PC - CFS junction box of 205 x 255 x 112mm with 4 Nos. stud type Terminal along with multi level knockouts as well as from rear side also for cable entries in different sizes for unprotected outdoor (UV resistance) with internally embedded gasket technology (Polyurethane). Lid fasteners shall have captive type thermoplastic screws with quarter turn knob option. The box shall be rust proof, water proof, dust proof, U/V Rays protected and 100% shock proof. The junction box shall fulfill the following standards IEC 6067&22 : Particular requirements for connecting boxes and enclosures. IEC 60695 - 2 - 11 : Glow Wire tested at minimum 960 deg C. impact Resistant : lK 09 ( 10 joule ) Halogen Free in accordance with IEC 60754-2 .with necessary supporting insulators fixed on hylem sheet ,MS sheet steel fixed inside the bottom portion of box to connect the cable gland complete, entire assembly fixed to pole /wall with Gl clamp 20 x 4mm and nuts & bolts, or inside the Copping of pole /Post top including MCB SP 6 Amp 10 KA24O V - 2 Nos, with necessary size copper lugs for connecting cables from junction box to fittings, complete all as specified and directed.