Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.6 LAdmitted-Finance | ₹25.6 L | L1 | Admitted-Finance |
| 2 | L2₹37.5 L+₹11.8 L (46.2%)Admitted-Finance D C 6 SIDCO INDUSTRIAL ESTATE SIDCO INDUSTRIAL ESTATE THUVAKUDI TIRUCHIRAPPALLI TIRUCHIRAPPALLI TAMIL NADU 620015 | TIRUCHIRAPPALLI | TAMIL NADU | 620015 | ₹37.5 L+₹11.8 L (46.2%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical The bidder dose not fulfill the QR |
| 4 | Rejected-Technical D 13 R D AGA ROAD MIDC INDUSTRIAL AREA CHINCHWAD PUNE PUNE MAHARASHTRA 411019 | PUNE | MAHARASHTRA | 411019 | - | - | Rejected-Technical The bidder dose not fulfill the QR |
| Sl No | Description | Qty | Unit | GEECO Enercon Pvt Limited L2 | SIGMA AGRO L1 |
|---|---|---|---|---|---|
| 1.00 | INNER ARM ASSEMBLY FOR CERM & EERM consists
i)Inner Arm Half-2 Nos.
ii)Hex Bolt M16x90-1 nos.(half threaded, grade 4.6)
iii) Hex Bolt M16x40-1 nos.(half threaded, grade 4.6)
iv) hex nuts M16-2 nos.( grade 4.6)
(MOC EN-08 for flats ) as per drawing / sample | 1,200 | Nos. | 4,32,000 ₹5,09,760 | 2,48,400 ₹2,93,112 Lowest |
| 2.00 | OUTER ARM FOR CERM (Total weight 8Kg+/-2.5-5%)
i)Roller wheel- 1 no.
ii) Arm- 2 nos.(10 mm thick flat)
iii)Washer- 2 nos.(45x28x3 mm)
iv)Pin - 2 nos.(L114xdia25mm round bar)
as per drawing / sample
*MOC EN-08 for roller wheel & pin and MS for arms & washers | 600 | Nos. | 5,14,800 ₹6,07,464 | 3,46,200 ₹4,08,516 Lowest |
| 3.00 | SLEEVE BEARING BRACKET ASSY. Consists
i)Sleeve Bearing/CI Liner (in two halves),C.I.FG-210 - 2NOS.
ii)HT hex Nut+ Bolt M12x50- 2nos.
iii)MS Strip (40x40x10)- 4 nos.
iv)Weld type - 6
(MOC FOR LINER SET IS AS PER IS-210 FG-210) as per drawing / sample | 60 | Nos. | - | 37,620 ₹44,391.6 Lowest |
| 4.00 | SET RING (Material EN-08)
ID-50+/-0.5mm , OD-75.0m, Height-18.00mm
Grub Screw,M10x15 mm-2nos. | 50 | Nos. | 13,500 ₹15,930 | 7,850 ₹9,263 Lowest |
| 5.00 | GRIP COUPLING FOR EERM (MOC EN-08 for flat) consists
Grub Screw m10x25 mm -1 no.
as per drawing / sample | 50 | Nos. | 56,200 ₹66,316 | 29,350 ₹34,633 Lowest |
| 6.00 | SHAFT SLEEVE 50 Ø MM (EN-24)
Inner dia -50+/- 0.5 mm
Outer dia-70+/- 0.5 mm
Length- 130+/-1 mm
Thickness-10 mm, | 40 | Nos. | 25,200 ₹29,736 | 14,400 ₹16,992 Lowest |
| 7.00 | SHAFT SLEEVE 40.5 Ø MM (EN-24)
Inner dia -40+/- 0.5 mm
Outer dia-50+/- 0.5 mm
Length- 120+/-1 mm
Thickness-5 mm | 45 | Nos. | 27,945 ₹32,975.1 | 8,415 ₹9,929.7 Lowest |
| 8.00 | PLAIN BEARING ASSEMBLY FOR RAPPING MECHANISM CONSISTS
i)Lower Half -01(IS-210-FG 200)
ii) Upper Half -01 01(IS-210-FG 200)
iii)Hex Bolt M16X120 mm-02 Nos (4.6 Grade half threded)
iv)Hex Nut M16 -02 nos.( 4.6 Grade)
*Casting must be free of all kinds of casting defects. | 1,200 | Nos. | 8,35,200 ₹9,85,536 | 5,24,400 ₹6,18,792 Lowest |
| 9.00 | TOP SLEEVE FOR EMMITING SHAFT DIA.40 MM (MATERIAL EN-8) | 10 | Nos. | 12,700 ₹14,986 | 12,570 ₹14,832.6 Lowest |
| 10.00 | END SHAFT FOR CERM
DIA 50mm
Lenth : 790mm
Hole Dia 17mm
Material : EN-8 as per drawing / sample | 10 | Nos. | 18,000 ₹21,240 | 10,270 ₹12,118.6 Lowest |
Tender Value
₹24.7 L
EMD Value
₹49,400
Closing Date
29 Jul 2025, 11:00 amClosed
CE(CTPP)
202 First Floor Administrative Building Chowki Motipura Chhabra Distt. Baran-325220 Rajasthan
Supply of Spares for ESP system of Unit#1 to 4, CTPP, Chhabra for FY. 2025-26
2025_RRVUN_477001_1
2026/25-26
Open Tender
Mechanical Engineering Items
Item Wise
90 days
CTPP, RRVUNL, Chhabra
As per uploaded tender documents
2 documents required · 2 mandatory
₹590
Account Officer
₹49,400
Yes
4 Oct 2025
12 Jun 2025
30 Jul 2025
12 Jun 2025
29 Jul 2025
12 Jun 2025
INNER ARM ASSEMBLY FOR CERM & EERM consists i)Inner Arm Half-2 Nos. ii)Hex Bolt M16x90-1 nos.(half threaded, grade 4.6) iii) Hex Bolt M16x40-1 nos.(half threaded, grade 4.6) iv) hex nuts M16-2 nos.( grade 4.6) (MOC EN-08 for flats ) as per drawing / sample
OUTER ARM FOR CERM (Total weight 8Kg+/-2.5-5%) i)Roller wheel- 1 no. ii) Arm- 2 nos.(10 mm thick flat) iii)Washer- 2 nos.(45x28x3 mm) iv)Pin - 2 nos.(L114xdia25mm round bar) as per drawing / sample *MOC EN-08 for roller wheel & pin and MS for arms & washers
SLEEVE BEARING BRACKET ASSY. Consists i)Sleeve Bearing/CI Liner (in two halves),C.I.FG-210 - 2NOS. ii)HT hex Nut+ Bolt M12x50- 2nos. iii)MS Strip (40x40x10)- 4 nos. iv)Weld type - 6 (MOC FOR LINER SET IS AS PER IS-210 FG-210) as per drawing / sample
SET RING (Material EN-08) ID-50+/-0.5mm , OD-75.0m, Height-18.00mm Grub Screw,M10x15 mm-2nos.
GRIP COUPLING FOR EERM (MOC EN-08 for flat) consists Grub Screw m10x25 mm -1 no. as per drawing / sample
SHAFT SLEEVE 50 Ø MM (EN-24) Inner dia -50+/- 0.5 mm Outer dia-70+/- 0.5 mm Length- 130+/-1 mm Thickness-10 mm,
SHAFT SLEEVE 40.5 Ø MM (EN-24) Inner dia -40+/- 0.5 mm Outer dia-50+/- 0.5 mm Length- 120+/-1 mm Thickness-5 mm
PLAIN BEARING ASSEMBLY FOR RAPPING MECHANISM CONSISTS i)Lower Half -01(IS-210-FG 200) ii) Upper Half -01 01(IS-210-FG 200) iii)Hex Bolt M16X120 mm-02 Nos (4.6 Grade half threded) iv)Hex Nut M16 -02 nos.( 4.6 Grade) *Casting must be free of all kinds of casting defects.
TOP SLEEVE FOR EMMITING SHAFT DIA.40 MM (MATERIAL EN-8)
END SHAFT FOR CERM DIA 50mm Lenth : 790mm Hole Dia 17mm Material : EN-8 as per drawing / sample
GD screen material as per IS 513,CRCA sheet 2.5mm (as per Drawing),material of hook MS, 4.00mm thick
Emitting rapping shaft I
Emitting rapping shaft II
Emitting rapping shaft III
C.I. Liner in two halves (MOC as per IS 210 FG 210)
Shock bar guide angle
U-Guide/clamp for collecting electrodes, Material - Cold rolled MS sheet IS 513, 2.50 mm thick or as per drawing/sample
Screen Tube for emmitting drives of ESP, Material - MS sheet 5.00 mm thick or as per drawing/sample, item should be painted with red oxide inner/outer side
GEECO Enercon Pvt Limited (BID ID -3223046)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .