PROVN OF STORAGE ACCN FOR POL BARREL AT AF STN LEH

Amount

Surface excavation n. exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and directed.

Excavation in over areas not exceeding 1.5m in depth and getting out in hard/dense soil, trimming sides, leveling bottom, watering and well ramming bottom, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth and not exceeding 10Sqm on plan and getting out in hard/dense soil, trimming sides, leveling bottom, watering and well ramming bottom, complete all as specified and directed.

Returning, filling in trenches (soil), including spreading, leveling and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.

Removing excavated material exc. 250metre km but n exc. 500metre and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Material and labour, Plain Cement Concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished, complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat, rough finished surface, complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, square, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) or flat, rough finished, complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide on rough finished surfaces of concrete, complete all as specified and directed

Supply and fix in position, mild steel bars TMT, 10m dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

Supply and fix in position, mild steel bars TMT, 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Material and labour, reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, and mass concrete, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in columns, pillars, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, pre-cast cement concrete block masonry with soild blocks type B1, 1:2:4 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

M & L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and reammed including watering complete all as specified and directed.

Material and labour, hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

Material and labour, hardcore of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.

Material and labour, 150mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.

Material and labour, 75mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.

Material and labour, for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour, 100mm thick cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in flooring, complete all as specified and directed.

Material and labour for polythin film black, 150 micron laid in floors.complete all as specified and directed.

Material and labour for cement concret work in pavment/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic meter, thickness of concrete 25 cm or less.complete all as specified and directed.

Material and labour for Finishing surface of concrete roads, pavements by brooming..complete all as specified and directed.

Material and labour for forming 20 mm thick expansion joint, filled with preformed bitumenious filler top 30 mm primed and sealed with sealing compound grade "A" thickness of concrete slabe 250 mm thick..complete all as specified and directed.

Material and labour for Forming contraction (Dummy) joints 65 mm deep X10 mm wide primed & filled with sealing compound grade "A"complete all as specified and directed.

Supply and fix mild steel section for posts or struts including cutting tops to shape as directed drilling holes notching for wire etc. flat iron fillets (for securing wire mesh) including all necessary drilling , bolting etc and similar work conforming to Fe-410-0 complete all as speciofied and directed

Material and labour, for Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick and colour having tensile strength of 50 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Steel rolling shutters 1.25 mm thick lathe, gear operated type with bevel gear box and crank handle with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; complete all as specified and directed

Supply and fix Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed

Material and labour, 18 to 20mm thick kota stone slab flooring (mirror polished), over and including 20mm thick screed bed/ bedding layer in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of kota stone, complete all as specified and directed.

Material and labour, machine cut kota stone slab 16 to 18mm thick as in risers of steps, skirting, dado, pillar & the like, laid over and including 10mm thick backing in cement mortar (1:3), and set with grey cement slurry @ 3Kg/Sqm, jointed and pointed in neat cement slurry mixed with pigment including rubbing and polishing (Mirror finish), complete all as specified and directed.

Material and labour, plain cement concrete (1:3:6) type C-2 using 20mm graded crushed stone aggregate as in plinth protections, 75mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.

Supply and fix, pressed steel frames for doors with one rebate, size of frame 105mmx60mm, including necessary fixing lugs, hinges, lock strick plate, etc, complete all as specified and directed.

Supply and fix, 35mm thick flush shutters, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Supply and fix, steel window with side hung shutter including projecting type hinges with steel handle and steel pegstay complete with glazing bars, dovetailed or welded as per specification, complete all as specified and directed.

Supply & fixing, Sheet glass 3mm thick, plain, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed.

Supply and fix, butt hinges, stainless steel medium weight, with chromium plated brass screws, 100mm size, ISI marked, complete all as specified and directed.

Supply and fix, Aluminium handle,150mm size, fabricated type, anodised, complete all as specified and directed.

Supply and fix, Barrel tower bolts 150mm long, aluminium anodised, of extruded section and fixed, complete all as specified and directed.

Supply and fix, sliding door bolts 250mm long, of extruded sections aluminum alloy, anodized, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminum, dia of bolt 12mm, complete all as specified and directed.

Supply and fix, aluminium drapery rod 28mm dia, ribbed, powder coated any shade, in pieces not exceeding 3m length, including set of fixing brackets, side ball finials and matching rings made from ABS plastics, fixed in repairs, complete all as specified and directed. Make:- AALISHAN - Ivory Pearl Interior Series or equivalent in Appx 'B'.

Supply and fix, particle board, 12mm thickness, grade 1 quality, exterior grade, medium density, flat pressed, BWR grade, prelaminated both sides with decorative type choice laminations as in pelmet boxes or in narrow widths fixed with screws, complete all as specified and directed.

Material and labour, rendering 15mm thick plaster on fair faces of brick walls or concrete surfaces in CM (1:4), in two layers i.e. 10mm in CM (1:6) and 5mm in CM 1:4) mixed with approved WPC as per manufecturer's instructions in 5mm layer only and finished fair & even without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately.

Supply only integral water proofing compound, complete all as specified and directed.

Material and labour, rendering 10mm thick plaster in cement mortar (1:4), on brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour, rendering 5mm thick in CM (1:3) as on ceiling, soffits of beams, chajjas, etc, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour, two coats of cement base cement base paint over a coat of alkali resistant primer including preparation of plastered/ concrete surfaces, complete all as specified and directed.

Material and labour, for two coat of dry distemper over a coat of white wash incl preparation of newly plastered wall surfaces complete all as specified and directed.

Material and labour, preparation of newly plastered sufaces of ceiling and applying two coats of white wash, complete all as specified and as directed.

Material and labour, preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over and including one coat of pink primer, complete all as specified and directed.

Material and labour, preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over and including red oxide primer, complete all as specified and directed.

Material and labour, 10mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 3% by weight of cement on concrete surfaces, finished even and smooth without using extra cement, after applying neat cement slurry @ 3 Kg/Sqm, including preparing roof surface, complete all as specified and directed.

Material and labour, water proofing treatment of roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.

Supply and fix, GI tubing 15mm bore medium grade with necessary GI fittings and fixed complete to wall, or laid under floors, or fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc, complete all as specified and directed.

Material and labour, for salt glazed stone ware (SGSW) grade Á' drain pipes 150mm bore, laid in trenches, jointed and tested complete all as specified and directed.

Supply and fix, vitreous china wash basin, white flat back of size 550x 400mm including PVC waste pipe 600mm long, PVC connection 300mm long and chromium plated waste coupling of size including brackets cutting and pinning in ends of brackets complete all as specified and directed.

Supply and fix, 15mm bore dia Pillar taps, fancy type cast copper alloy CP with capstan heads , chromium plated screwed down, high pressure with or without letters cold or hot with long screwed shanks and fly nuts screwed for iron pipe and fixed. complete all as specified and directed.

Supply and fix, vitreous china bowl urinal flat back, of size 465x 355 x 265 mm white (minimum), with grating and union for discharge pipe including flush pipe and waste pipe and connections to flusing pipe and outgoing pipe complete all as specified and directed.

Supply and fix, PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fix, 15mm dia stop valves cast copper alloy, chromium plated with long shank and cup screwed down high press with crutch or butterfly handle both ends for iron pipe complete all as specified and directed.

Supply and fix, grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gm) complete all as specified and directed.

Supply and fix,pegset chromium plated with six hooks suitable distance apart fixed complete alll as specified and directed.

Supply and fix,chromium plated soap dish weighing atleast 125 gm fixed in complete all as specified and directed..

Supply and fix, bib taps, cast copper alloy, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore, complete all as specified and directed.

Supply and fix, Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

Material and labour for point wiring in steel conduit unsheathed multistrand copper conductor cable of 1.5 sqmm single core FRLS for one light/fan point controlled by one flame proof switch including continuouse earth continuity copper earth wire of same size connected to common earth dolly complete all as specified and directed . Note : (a) wiring shall be done by using proper colour coding.

All as per item No 73 here-in-above but using 2.5 sqmm wire for 15 Amps flame proof socket

Supply and fix, LED flameproof light fitting 2 x 20 Watts, CIMFR approved and recommended for gas/vapor group of IIA & IIB, Zone 1 & 2 and IP-65 protection with die cast aluminium housing with heat resistant toughned glass with LED tube light fixtures, driver, holder, connector etc. complete with all accessories pre-wired and including connecting up with three core flexible copper conductor wire of suitable size complete all as specified and directed .

Supply and fix, flame proof switch socket & plug combination in LM6 cable termination box in LM6, 16 Amps, 250 volts, 2P + earth. Make : Sudhir Switchgears or equivalent

Supply and fix, flameproof exhaust fan of size 450mm sweep MS body including louvers with IP-66 protection, complete with all accessories pre-wired and connecting up with twin core twisted flexible copper conductor wire of suitable size complete all as specified and directed

Supply and fix, Switch flame proof rotary type with termination box in LM6, 16 Amps, single pole 250 volts. Make : Sudhir Switchgears or equivalent

Supply and fix, ceiling rose Bakelite white/black coloured of size 25x50mm two to three terminals, complete all as specified and as directed.

Supply and fix, Flame proof SPN DB 8 way 240 V having 200 A rated bus bars with 32 Amps SPN MCB-01 No and 16-32 Amps SP MCB's - 06 Nos complete all as specified and directed . Make : Sudhir Switchgears or equivalent.

Supply and fix, Switch piano, flush type 5 Amps One Way 230 volts complete all as specified and directed

Supply and fix, street light bracket made out of 40mm dia GI pipe light grade tubing 1.2 mtr long bent to required shape including 02 Nos of MS clamp of size 450x50x5mm flat and suitable size of nuts and bolts complete all as specified and directed

Supply and fix, LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and internal wiring with suitable copper wire complete all as specified and directed

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 16Sqmm 2core aluminum conductor 1100volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note(s): Excavation & earth work, sand cushioning and PCC cover for protection of cable shall be measured and paid separately.

Supply and laying / fixing , GI pipe light grade 40mm dia bore for cable protection fixed to pole/wall or laid under floor/road/pavement, complete all as specified and directed. Note (s) : (i) MS clamps, nuts, bolts etc where required shall be measured and paid separately. (ii) Cutting road etc. shall be measured and paid separately.

Material and labour, sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.

Supply, Jointing & laying of Steel tubing medium grade galvanised of size 40mm dia laid in trench or fixed to wall including all fiitings such as elbow, tee, socket, reducers etc. complete all as specified and directed.

Supply, Jointing & laying of Steel tubing medium grade galvanised of size 25mm dia laid in trench or fixed to wall including all fiitings such as elbow, tee, socket, reducers etc. complete all as specified and directed.

Material and labour, for random rubble stone masonry in cement mortar 1:6 (1 cement : 6 coarse sand) as in valve pit of internal size (90cms x 90cms x 60 cms), with 50 mm thick coping with PCC M-15 type B-0 (using 12.5 mm graded crushed stone aggregate), including excavation & earth work and disposal of surplus soil to a distance not exceeding 50 metres and depositing all as directed, plastering internally with 15mm thick plaster in cement mortar 1:4 (1 cement : 4 coarse sand) and flush pointing externally in the same mortar as the work proceeds including 3.15 mm thick mild steel sheet cover with handle & locking arrangement and angle iron frame of size 40 x 40 x 5mm including painting with two coats of synthetic enamel paint over one coat of red oxide primer on steel surface, complete all as specified and directed.

Material and labour, for inserting Tee in the existing pipe line of any size and connecting the new pipe line of size 40mm dia including fittings etc. complete all as specified and directed (Note Earthwork to be measured and paid separately)

Supply and fixing, Gunmetal globe or Gate valves, with iron wheel head, srewed both ends for iron pipe and fixed 40 mm of size complete all as specified and directed.

Supply and fixing, Gunmetal globe or Gate valves, with iron wheel head, srewed both ends for iron pipe and fixed 25 mm of size complete all as specified and directed.

Material and labour for Fire alarm control panel complying with BSEN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules including all accessories complete with all accessoriescomplete all as specified and directed .

Material and labour for Smoke Detectors Complying with and type certified to EN-45 Addressable type smoke detector Photoelectric / Optical with base with self built intelligence as per IS: 11360 complete all as specified and directed .

Material and labour for manual call point (MCP) with all accessories complete all as specified and directed .

Material and labour for fire alarm sounders / sirens electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 dB to 120 dB measured at 1.5 mtr with sound output variation of +5 DB 3500 mtrs range complete all as specified and directed .

Material and labour for 1.5 Sqmm 2 core multi-stranded copper wire, PVC insulated sheathed cable for connecting junction box to street light fitting complete all as specified and directed.

Material and labour for fire responce indicator including all accessories and fixing arrangement complete all as specified and directed.

Material and labour for copper strip of 20mm x 3.0mm with screws/ washers etc. over PVC saddles/spacers on wall and roof of building complete all as specified and directed . Note : Max distance between spacers/saddles is 0.5 mtr

Material and labour for air termination, single pointed, copper rod 12 mm dia and 300mm long screwed properly on copper strip complete all as specified and directed

Material and labour for test point terminal block made out of gun metal or phosphorus bronze size 75 x 75 x 25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hax. head screw complete all as specified and directed .

Material and labour for maintenance free chemical earthing system complete with one No UL 464 approvrd copper bonded earth rod 17mm dia , 3.0 metre long electrode burried in ground to bore of 150mm dia , Vertically to a depth not less than 0.5 metre below normal ground level including provision to connect the earth continuity conductor with copper bonded earth rod as per manufacturer design or all as directed including 60 Kg NABLLAB certified back fill chemical compound for filling bore holes with Min 6.0 Kg of Hygroscopic Gel. The ground enhancement chemical may be used in place of back fill compound as required and manufacturer recommendation to obtain 1.0 Ohms earth resistance value. A layer of 250-300 mm soil ( Vegitable / Cotton soil) is also required out side earth bore including necessary ingredients and water during process to obtain desired value . The earthing copper strip of 20x3.0 mm up to length 7.5 metre upto test point from copper rod is also included. The scope included iron frame of size 20x20 mm fixed with hinged with pit cover of 300 x300 mm made of cast iron as per company standarad shall be as recommanded by manufacturer complete all as specified : Make;- JMV / Pargati electrocom / Enove/Marconite Note:- (i) Payment shall be made only after satisfactory testing to the entire satisfaction of GE. The contractor has made alternate earthing in case test result not found satisfactory without extra cost to the Govt quoted rates shall be deemed to included. (ii) Contractor shall submit two year guarantee for earth resistance below 2.0 Ohms and raeth neutral voltage less than that 2.0 volts.

M&L for providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) set in cement mortar 1:4 as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles complete all as specified and directed.

KAMLA CONSTRUCTION COMPANY

M/S RIGDOL CONSTRUCTION