Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹18.0 LAdmitted-Finance | -35.99% | ₹18.0 L | L1 | Admitted-Finance |
| 2 | L2₹19.5 LAdmitted-Finance | -31.00% | ₹19.5 L | L2 | Admitted-Finance |
| 3 | L3₹22.5 LAdmitted-Finance | -20.20% | ₹22.5 L | L3 | Admitted-Finance |
| 4 | L4₹24.9 LAdmitted-Finance | -11.52% | ₹24.9 L | L4 | Admitted-Finance |
Tender Value
₹28.2 L
EMD Value
₹56,383
Closing Date
11 May 2026, 3:00 pmClosed
EE,ELD-9,DDA
EE,ELD-9,DDA
SITC of street lights on the road near Indian Oil petrol Pump, Sector -24 road,Rohini.
2026_DDA_907151_1
02/EE/ELD-9/DDA/NIT/ 2026-27 (Revised)
Open Tender
Electrical Works
90 days
ROHINI
Please refer Tender documents.
13 documents required · 13 mandatory
₹0
₹56,383
19 May 2026
1 May 2026
12 May 2026
1 May 2026
11 May 2026
1 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Octagonal Steel Pole Supplying, installation, testing and commissioning of hot dip galvanized octagonal steel pole of 9 Mtr. height and made of 3 mm thick sheet, having bottom 155 mm OAF & top 70 mm OAF, hot dip galvanized M.S base plate of size 260 mm x 260 mm x 16 mm thick, single overhang bracket made of 3.60 mm thick hot dip galvanized M.S. pipe with 1.0 Mtr. long tube of suitable dia. to accommodate the pole & fittings, on existing RCC foundation with GI bolt and nuts, making connections, interconnections with suitable size of copper wire with thimble/lugs in the connector box, earthing, marking/ numbering of pole etc. complete as per drawing & technical specifications attached including following accessories with mounted inbuilt control box having flush cover with 2 nos mounting strips with tapped holes:-
(a) 6 mm thick phenolic laminated / bakelite sheet inside the window mounted on the existing mounting strips inside the flush door.
(b) 4 nos. 40 Amp terminal block suitable for following conductor / cable, fixed on DIN channels i/c providing and fixing DIN channel of suitable length – on the existing phenolic laminated / bakelite sheet.
(i) 16 sq mm conductor – 4 nos and short links 5-nos.
(ii)Terminal suitable for 6 SWG GI wire / 1.5 sq mm wire.
(c) 6 Amp SP MCB,10 kA ‘C’ Series-1 nos. including mountings on DIN channel, Earth stud 2 Nos. welded at suitable height i/c washers, springs washers & nuts etc.
(d) Suitable arrangement for saddling of incoming / outgoing cables i/c lugs thimbles etc as required. | 38 | Each | 18,764 | ₹7,13,032 | BI01010001010000000000000515BI0100001113 |
| 1.1 | Foundation nuts & bolts | - | - | - | - | BI01010001010000000000000515BI0100001114 |
| 2 | Providing and laying in position, M25 reinforced cement concrete foundation of size 500mm long x 500mm wide and 1400 mm deep i/c excavation of earth, refilling, providing cutting, bending and placing in position reinforcement of cold twisted bar of 12 mm dia. 1500 mm long (approx.)-8 Nos. and reinforcement ring of cold twisted bar of 8 mm dia. 2000 mm long (approx.)-8 Nos. (With approx. 150 mm spacing) i/c centering & shuttering as required, positioning of foundation bolts 4 nos. M-24x750mm long foundation bolt of L Type (100 mm bend & 750 mm straight), 150 mm top threaded portion of bolt shall be galvanized and rest portion shall be coated with Red oxide to avoid corrosion & G.I nuts (EN 8-grade) with 3 Nos. and 2 Nos. washer, along with 2 Nos. templates/Anchor plate of size 260 mm x 260 mm x 3 mm thick shall be supplied manufactured from the original pole manufacturing company only for casting of foundations and providing 63 mm (OD) 2 Nos. DWC pipe 1 mtr long approx. each for cable entry and exit etc complete as required. | 38 | Set | 10,304 | ₹3,91,552 | BI01010001010000000000000515BI0100001115 |
| 2.1 | Lighting Fixture | - | - | - | - | BI01010001010000000000000515BI0100001116 |
| 3Supplying, installation, Testing & Commissioning of following wattage Street light LED fixture, powder coated pressure die cast aluminium body (System lumen efficacy >=120<135 lm/Watt) with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade,internal surge protection of 5 KV L,N,E as per IEC 61000-4-5,Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P.F.≥0.95, IP-66,IK-10, CRI >70 , under voltage and overvoltage protection,EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM <5,Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty lumen efficacy >=120<135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). | ||||||
| 3.1 | 120 Watt | 38 | Each | 2,958 | ₹1,12,404 | BI01010001010000000000000515BI0100001118 |
| 3.2 | Wiring from pole control box to light fitting(s) | - | - | - | - | BI01010001010000000000000515BI0100001119 |
| 4 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor Single core cable in the existing surface/recessed steel/PVC conduit/ Pole as required.
a) 3 x 1.5 Sq.mm | 380 | Mtr. | 104 | ₹39,520 | BI01010001010000000000000515BI0100001120 |
| 4.1 | Cables & cable laying | - | - | - | - | BI01010001010000000000000515BI0100001121 |
| 5Supplying of following sizes of PVC insulated and PVC sheathed/XLPE aluminium conductor armoured power cable of 1.1 KV grade i/c connection & testing etc. as required and as per technical specification enclosed. | ||||||
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.22 MB
BOQ_953486.xls
BOQ • 0.32 MB
NIT02.pdf
Tender Documents • 1.71 MB
Download all tender documents and submit your bid