Construction of Gazeboo and other developement works in park in front of Medhavi Kinder garden in Vijaynagar 2nd stage 15 th cross

Construction of Gazeboo and other developement works in park in front of Medhavi Kinder garden in Vijaynagar 2nd stage 15 th cross

Mechanical Means -

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift and as per the direction of Engineer In charge of work

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off ...

Providing lime wash on walls with one coat with lime of approved quality to give an even shade, including cost of materials, labour complete as per specifications and as per directions of Engineer-in-...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners where...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Renewing Glass panes, with wooden fillets wherever necessary: Float Glass panes of nominal thickness 4 mm (weight not less than 10kg/m²) ---- With all lead and lift and as per the direction of Engine...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle gr...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural ...

Providing and fixing Mangalore tile roofing using first class tiles with necessary special tiles for ridges and hips, wood reepers and pointed with cement mortar 1:4 over the existing rafter...

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in...

old Terrace screed Repair with Uv Resistant waterproof coating - Providing and Applying high elastic & resilient Acrylic polymer Waterproofing coating which is single component, cold applied,...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Finishing walls with textured exterior paint of required shade :Old work (One coats) applied @ 1.82 l/10 m² including preparing the surface after thoroughly cleaning the surface to remove all dirt, ...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of En...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional co...

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, w...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 86 mm long, weighing not less than 88 g ---- With all lead and lift and as per the direction of Engineer In charg...

Providing and fixing PTMT stop cock of approved quality and colour - 15 mm nominal bore, 86 mm long, weighing not less than 88 g ---- With all lead and lift and as per the direction of Engineer In cha...

Providing and fixing PTMT pillar cock of approved quality and colour: 15 mm nominal bore, 107 mm long, weighing not less than 110 g ---- With all lead and lift and as per the direction of Engineer In ...

Providing and fixing PTMT grating of approved quality and colour.- Circular type - 100 mm nominal dia ---- With all lead and lift and as per the direction of Engineer In charge of work

Providing and fixing PTMT Ball cock of approved quality, colour and make

complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. - 20 mm nominal bore, 120 mm long, weighing not less...

Providing and fixing PTMT swivelling shower, 15 mm nominal bore,

weighing not less than 40 gms ---- With all lead and lift and as per the direction of Engineer In charge of work

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g. ---- With all lead and lift and as p...

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts,

collar and bush of approved quality and colour. - 15 mm nominal bore with 450 mm length ---- With all lead and lift and as per...

Providing and fixing PTMT extension nipple for water tank pipe, fittings

of approved quality and colour. - 20 mm nominal bore, weighing not less than 40 g ---- With all lead and lift and as per the di...

Making chases up to 7.5x7.5 cm in walls including making good and

finishing with matching surface after housing G.I. pipe etc. ---- With all lead and lift and as per the direction of Engine...

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& w...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel ...

Providing and fixing Single flow hand showers with Anti lime jets with 1.5m Extendable flexible tube, holder & wall flange made of Stainless steel with all concealed fitting arrangements & a...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

Mono bock single phase Motor 1.5HP ---- With all lead and lift and as per the direction of Engineer In charge of work

Supplying heavy gauge PVC conduit pipe .da .mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling an...

Supplying heavy gauge PVC conduit pipe .da .mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling an...

Supplying heavy gauge PVC conduit pipe .da .mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling an...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 75x75x65mm ---- With all lead...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100x75x65mm ---- With all lea...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135x75x65mm ---- With all lea...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 180x90x65mm ---- With all lea...

Supplying and flush mounting powder coated/galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 1-3...

Supplying and flush mounting powder coated/galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 6wa...

Supplying and flush mounting powder coated/galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 8 w...

Supplying and flush mounting powder coated/galvanised metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone/C.C wall 10-...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. Of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. Of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. Of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. Of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch/socket/stepped electronic fan regulator /dimmer/telephone

socket etc on existing modular switch plate. IS 3854 and IS 1293 6Amps one way ---- With all lead and l...

Supplying and fixing of modular switch/socket/stepped electronic fan regulator /dimmer/telephone

socket etc on existing modular switch plate. IS 3854 and IS 1293 6Amps two way ---- With all lead and l...

Supplying and fixing of modular switch/socket/stepped electronic fan regulator /dimmer/telephone

socket etc on existing modular switch plate. IS 3854 and IS 1293 6Amps 3 way Socket ---- With all lead ...

Supplying and fixing of modular switch/socket/stepped electronic fan reculator /dimmer/telephone socket etc on existing modular switch plate. IS 3854 and IS 1293 32Amps DP switch ---- With all lead an...

Point wiring using copper wire without switch: Supplying and wiring adopting loop system in existine

PVC conduit /Casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insul...

PVC conduit /Casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2x1.5Sq-mm cable confirming to the GP without switch, the other end of the wires shall be termi...

Point wiring using copper wire without switch: Supplying and wiring adopting loop system in existing

PVC conduit/Casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insula...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed system of wiring with specified --...

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size .mm conduit using necessary machine screws. 80mm ---- With all lead and lift and as per the direction of Engin...

Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete ...