e-NIT No.11 / (EnM) M-8/ 2022-23, Item No.02

Supply of 10 HP Submersible Pump Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained bronze impeller complete in C.I Body. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on 3-ɸ, 415V, 50Hz, AC supply,Discharge: 310 LPM, Head: 89 mtr, Stage - 10. Make of Pump: BS/KSB/SU/As approved by DJB

Supply-Of G.I. Pipe 65mm dia, Medium-class, each of 3 Meters Long, duly threaded on both-ends, welded & fitted with G.I./ M.S. Flange of minimum thickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange.Make of Pipe: Jindal / TATA.

Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 65 mm dia. Make of Pipe: Jindal / TATA.

Supply-Of Orifice-Assembly 65mm dia, 0.6 Meter Long, Double-Flange. One side M .S. Flange and other side G.I flange.

Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 6.0 sq mm. size in 100mtr. Roll. Make: Finolex / Havells/CCI

Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12.5 mm thick, 65 mm wide M.S.Plate for holding the Pipe of 65 mm dia.

Supply-Of G.I. Bend 90⁰ x 65 mm dia, having Flange at both-ends One side M .S. Flange and other side G.I flange

Supply-Of Nut-Bolts, ½” dia of different size i.e. 1.5” & 2.5” Long, threaded of good quality.

Supply-Of Rubber-packing for 65mm dia Flange.

Supply-Of Bore-Cover Plate of Size: 300 mm dia, made out from 6 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of 80 mm dia in center with Locking arrangement by Nuts & Bolts.

Supply of CI DF Non Rising spindle sluice valve PN 1.0 / IS:14846 CI body/wedge/bronze rins/SS/l410 Shaft construction of size: - 80 mm.Make: Kirloslar/IVC

Supply-Of C.I. D/F swing-type Non-Return Valve, as per 1S:5312 (Part 1 & 2) PN 1.0, 1S:14846, C.I. Body door of size: 80 mm dia.Make: Kirloskar /IVC

Supply of Electronic Dosing pump Model No. UC-11 Flow rate – 4 LPH Pressure – 5.5 KG/CM^2 MOC – PP Make – Milton Roy

Supply of Electromagnetic Flowmeter of 80MM size Make:- IOTA/DJB Approved

S/O MS Pipe Confirming to IS:1239 Part-I, Medium class 80 mm diameter. Make: Jindal/ Tata.

Installation of submersible pump and all allied electrical & mechanical accessories by lowering of submersible pump-set adjoining with pipes by tightening of nut-bolts on flanges welded on GI pipes. Laying of delivery system with sluice valve and NRV. Lowering of pump-set and pipes will be carried out with help of heavy labour, chain pulley hanged on either with tripod or Hydra.

S/o New generation energy saving and environmental friendly long life 45W LED street light made up of pressure die cast aluminium housing with high efficeint LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07.

Wiring for circuit /sub-main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor. Single core cable in surface / recessed PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. (DSR 1.14.4)

Supply and fixing 5A to 32A rating, 240/415V,10kA,"C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required ( single pole neutral)(DSR 2.10.2)

Fixing of LED Fitting on poles/walls with MS bracket,clamping, earthing with earthing wire etc. as required.

SUSHIL KUMAR SAINI