Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.2 Cr
EMD Value
₹1.3 Cr
Closing Date
20 Nov 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Bangalore Electricity Supply Company Limited
AGMP1
Comprehensive improvement of feeders in Chitradurga District for a period of two years on total turnkey/partial turnkey, under percentage quoting basis.
BESCOM/2024-25/EL/WORK_INDENT212
BESCOM/2024-25/EL/WORK_INDENT212
Open
Electrical
Two Tender Document System(Two Cover)
BESCOM Corporate Office Procurement section Bengaluru
4 documents required · 0 mandatory · 4 optional
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
The Bidder should have successfully completed as prime contractor, at least one work of Electrical distribution network (like construction of HT OH or UG lines and LT OH or UG or AB lines, Erection of distribution transformers) of value not less than 50% of the amount put to tender in the previous five financial years (2018-19, 2019-20, 2020-21, 2021-22 and 2022-23) in any ESCOMs/Distribution companies or any Government Electrical Utilities/PSUs.Note: Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weightage of 10% per year to bring them to the price level of the FY in which the tenders are invited. Documents to be uploaded: Scanned copy of the DWA and satisfactory Work completion certificate duly indicating the amount, issued by an officer not below the rank of Executive Engineer or equivalent of the concerned ESCOMs/ Govt. Utilities/PSUs shall be uploaded.
The Bidder should have executed the following minimum quantities of work in any ESCOMs/Distribution companies or any Government Electrical Utilities/PSUs on PTK/TTK in any One year during the previous 5 years (2018-19, 2019-20, 2020-21, 2021-22 and 2022-23) and the same should be in successful operation for at least one year from the date of commissioning: i) Should have constructed at least 450 RKms of OH HT or LT Lines or HT or LT covered conductor or UG or AB cable. and ii)ii. Should have commissioned at least 350 Nos. totalling to 8750 kVA of Distribution Transformers. (any capacity). Documents to be uploaded: Scanned copy of the DWA and Performance certificate issued by an officer not below the rank of Executive Engineer or equivalent of the concerned ESCOMs/ Govt. Utilities/PSUs shall be uploaded.
Even though the Bidders meet the above criteria, they are subject to be disqualified if they have: i) made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements. and/or (ii) record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. and/or (iii) Participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification. and/or (iv) Black-Listed due to non-performance in execution of works by any ESCOMs/Govt. Utilities/PSUs as on date of bid submission. and/or (v) Defaulted/short closed due to non-performance in execution of works against the order placed by any ESCOMs/Govt. Utilities/PSUs as on date of bid submission. Documents to be uploaded: Scanned copy of the self-declaration on notarized stamp paper of Rs.500/- shall be uploaded. (Annexure-II). The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done.
Litigation History:The Bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the preceding five years, A consistent history of awards involving litigation against the Bidder or any partner of Joint Venture may result in rejection of Bid. Documents to be uploaded: Scanned copy of Self-declaration on notarized stamp paper of Rs.500/- shall be uploaded. The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done.
The Bidder should be in existence as any of the following: a) Company incorporated in India under the Companies Act, 1956/2013 including any amendment thereto b) LLP incorporated in India under the Limited Liability Partnership (LLP) Act, 2008 including any amendment thereto c) Partnership Firm under Partnership Act, 1932 in India d) Sole Proprietorship Concern. Documents to be uploaded: a) 1. Certificate of Incorporation issued by Registrar of Companies as per Companies Act 1956/2013 along with Memorandum of Association and Articles of Association of the Company.2. Annual filings (E-Forms AOC-4, MGT-7) filed by the Company to Registrar of Companies (Ministry of Corporate Affairs, Government of India) for preceding two Financial Years.3. Declaration from Directors of the Company in MBP-1 Form, stating that they are not disqualified to be a Director of the Company along with the list of Companies in which they are Directors as on the date of inviting tender (s). (b) 1. Certification of Incorporation issued by Registrar of Companies as per LLP Act 2008.2. Limited Liability Partnership Agreement of LLP. 3. Form 11-Annual Return filed by LLP to Registrar of Companies (Ministry of Corporate Affairs, Government of India) for preceding two Financial Years. (c) 1. Partnership deed, GST Registration certificate. 2. Shops and establishment Registration certificate, as applicable. (d) PAN/GST Registration certificate.
The Bidder should possess valid Class-I/ Super grade Electrical Contractors license issued by the Electrical Inspectorate, Government of Karnataka. Documents to be uploaded: Scanned copy of valid Class-1/Super grade Electrical Contractors License issued by Electrical Inspectorate, Government of Karnataka shall be uploaded.
The Bidder shall have a functional office in BESCOM area functioning at least for past 1 year. Documents to be uploaded: Scanned copy of the any registration certificates issued by the authorities of Govt. of Karnataka mentioning the address shall be uploaded.
A certificate for having read the clauses is required to be submitted/uploaded by the Bidder separately in the following format.I have read the clause regarding restrictions on procurement from a Bidder of a country which shares a land border with India. I certify that this Bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this Bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached.)Documents to be uploaded: Scanned copy of the self-declaration in the prescribed format as per Annexure-II on notarized stamp paper of Rs.500/- shall be uploaded. The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done.
Any Bidder from a country which shares a land with India will be eligible to bid in this tender only if the Bidder is registered with the Competent Authority. (As per Government Order No. FD 455 Exp-12/2020 dated 25.08.2020.) Documents to be uploaded: Scanned copy of Self-declaration on notarized stamp paper of Rs.500/- shall be uploaded regarding Boarder sharing or not. If the Bidder from a country which shares a land with India, Registration certificate issued by the competent authority shall be uploaded. The self-declaration shall clearly indicate the tender enquiry number and date on which declaration is done.
The Annual Turnover of the Bidder in at least two financial years should not be less than the amount put to tender during the preceding five financial years i.e., (2018-19, 2019-20, 2020-21, 2021-22 and 2022-23).Note-Updated to the FY in which the tenders are invited. Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the FY in which the tenders are invited. Documents to be uploaded: Scanned copies of the audited Annual Accounts statements such as P&L statement, Balance sheets for the respective FYs shall be uploaded.
Tender Capacity: Bidder who meets the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity is equal to (AxNx1.5-B) Where, A is equal to Maximum value of works executed in any one year during the last five years (updated to FY 2023-24 price level), taking into account the completed as well as works in progress. N is equal to Number of years prescribed for completion of the works for which tenders are invited. B is equal to Value, at FY in which tenders are invited price level, of existing commitments and on-going works to be completed during the next 24 months. Documents to be uploaded: Scanned copy of the statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works as per the format prescribed in the Techno-Commercial sheet shall be uploaded. The bidder shall note that the value of pendency of work should be considered based on financial progress achieved in the particular work as on the date of bid submission. The statement should be certified by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
The Liquid Assets as on as 30.09.2024 or at a later date before submission of the bid consisting of Cash at Bank (plus) Term Deposits (plus) availability of fund based credit facility in any Nationalized/scheduled commercial Bank shall not be less than 12.5% of the amount put to tender. Documents to be uploaded: The cash at Bank, Bank Deposits and availability of fund based credit facilities shall be supported by a certificate issued by Nationalized/ Scheduled Bank shall be uploaded. If the Bidder has banking with more than one Bank, then the available balance liquid assets mentioned above on a particular date i.e., as on 30.09.2024 or any date before submission of tender shall be the same date and time for all the banks. In case of Fund Based credit facility, the certificate issued by Nationalized/ Scheduled Bank duly mentioning sanctioned limits, funds utilized so far and balance available as on 30.09.2024 or at a later date, before submission of the bid shall be uploaded. The certificate shall be submitted in the format as per Annexure-I.
₹3,060
₹1.3 Cr
6 Oct 2024
6 Oct 2024
21 Nov 2024
7 Nov 2024
7 Nov 2024
Comprehensive improvement of feeders in Chitradurga District for a period of two years on total turnkey/partial turnkey, under percentage quoting basis.
Supply of PSCC Pole - 9 Mtr Long, 300 Kg WL
Supply of PSCC Pole - 9 Mtr Long, 200 Kg WL
Supply of PSCC Pole - 8 Mtr Long, 200 Kg WL
Supply of RCC Pole - 9 Mtr Long, 145 Kg WL
Supply of RCC Pole - 8 Mtr Long, 115 Kg WL
Supply of Pre-Stressed Tubular Spun pole-11 Mtr long, 500 kg WL
Supply of RCC pole clamp - GI
Supply of PSCC Pole (140 Kg WL) clamp- GI
Supply of PSCC Pole (200 Kg WL) clamp- GI
Supply of PSCC Pole (300 Kg WL) clamp- GI
Supply of 11 kV, Horizontal Cross Arm-GI
Supply of 11 kV, Special 3 Pin Cross Arm-GI
Supply of LT 4 Pin Cross Arm-GI
Supply of LT 2 Pin Cross Arm-GI
Supply of HT ST Support 50x8 mm Flat - GI
Supply of LT ST Support 50x6 mm Flat - GI
Supply of 11kV, Horizontal Cross Arm with HT Single Top supporters, clamps, bolts, nuts & washers - GI for RCC Pole
Supply of 11kV, Horizontal Cross Arm with HT Single Top supporters, clamps, bolts, nuts & washers - GI for PSCC Pole 140 kg WL
Supply of 11kV, Horizontal Cross Arm with HT Single Top supporters, clamps, bolts, nuts & washers - GI for PSCC Pole 200 kg WL
Supply of 11kV, Horizontal Cross Arm with HT Single Top supporters, clamps, bolts, nuts & washers - GI for PSCC Pole 300 kg WL
Supply of LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - GI for RCC Pole
Supply of LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - GI for PSCC Pole 140 kg WL
Supply of LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - GI for PSCC Pole 200 kg WL
Supply of LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - GI for PSCC Pole 300 kg WL
Supply of LT 2 Pin Cross Arm with clamps, bolts, nuts & washers with brace - GI for RCC Pole
Supply of LT 2 Pin Cross Arm with clamps, bolts, nuts & washers with brace - GI for PSCC Pole 140 kg WL
Supply of LT 2 Pin Cross Arm with clamps, bolts, nuts & washers with brace - GI for PSCC Pole 200 kg WL
Supply of LT 2 Pin Cross Arm with clamps, bolts, nuts & washers with brace - GI for PSCC Pole 300 kg WL
Supply of Special cross arm with cross arm for EG Stirrups, braces,clamps, bolts nuts and washers complete
Supply of Spiral Earth Electrode
Supply of EG Stirrups with GI wire lacing
Supply of Strain Clamp 3 bolt type for 70/90 kN Disc Insulator
Supply of 11 kV, 70 kN composite/polymeric insulator
Supply of 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm Dia FRP Rod)
Supply of 11 kV, 45 KN Polymeric Insulator
Supply of 1.1 kV Pin Insulator with GI Pin
Supply of No. 8 Strain Insulator
Supply of No. 15 Strain Insulator
Supply of DISC insulator 45kN Porcelain
Supply of Guy with No. 15 Strain Insulator and Concreting materials
Supply of Guy Set with No. 8 Strain Insulator and Concreting materials
Supply of Rabbit ACSR Conductor
Supply of Coyote ACSR Conductor
Supply of PG Clamps for Rabbit to Rabbit conductor
Supply of PG Clamps for Coyote to Coyote Conductor
Supply of PG Clamp - Rabbit to 50 Sqmm Al Lead Wire
Supply of PG Clamp - Rabbit to 95 Sqmm Al Lead Wire
Supply of PG Clamp - Rabbit to 120 Sqmm Al Lead Wire
Supply of PG Clamp - Rabbit to 150 Sqmm Al Lead Wire
Supply of PG Clamp - Rabbit to 185 Sqmm Al Lead Wire
Supply of PG Clamp - Rabbit to 240 Sqmm Al Lead Wire
Supply of 11 kV, 400 Amps Double Break GOS
Supply of 11 kV, 200 Amps Single Break GOS
Supply of H-Frame set for fixing 11 kV, 200 Amps Single Break GOS - GI
Supply of DOLO Cut Out
Supply of GI Wire 8 SWG
Supply of GI Wire 10 SWG
Supply of Guy wire 7/10 SWG
Supply of Caution/Danger Board
Supply of Anti Climbing Device (12 Mtr GI Barbed Wire)
Supply of 10 kV, 5 kA Polymeric Type lightning arrestor with ground disconnector
Supply of 11 kV, HG Fuse Unit with Solid Core Insulator
Supply of LT Protection Kit
Supply of LT Distribution box for 100 kVA DTC with MCCB's (Sheet metal)
Supply of LT Distribution box for 250 kVA DTC with MCCB's (Sheet metal)
Supply of 1.1 kV class HR PVC Insulated & Sheathed Single core 25 Sqmm lead wire
Supply of 1.1 kV class HR PVC Insulated & Sheathed Single core 50 Sqmm lead wire
Supply of 1.1 kV class HR PVC Insulated & Sheathed Single core 95 Sqmm lead wire
Supply of 1.1 kV class HR PVC Insulated & Sheathed Single core 120 Sqmm lead wire
Supply of 1.1 kV class HR PVC Insulated & Sheathed Single core 240 Sqmm lead wire
Supply of Heavy Duty Long Barrel Copper Lug - 50 Sqmm
Supply of Heavy Duty Long Barrel Copper Lug - 95 Sqmm
Supply of Heavy Duty Long Barrel Copper Lug - 120 Sqmm
Supply of Heavy Duty Long Barrel Copper Lug - 240 Sqmm
Supply of LT line spacer- for 2 wire
Supply of LT line spacer- for 4 wire
Supply of LT line spacer- for DTC Wiring
Supply of Fish Plate with necessary Clamps, bolts and nuts etc complete - GI for RCC Pole
Supply of Fish Plate with necessary Clamps, bolts and nuts etc complete - GI for PSCC Pole 140 KG WL
Supply of Fish Plate with necessary Clamps, bolts and nuts etc complete - GI for PSCC Pole 200 KG WL
Supply of Fish Plate with necessary Clamps, bolts and nuts etc complete - GI for PSCC Pole 300 KG WL
Supply of PVC Pipe 25 mm Dia
Supply of PVC Pipe 40 mm Dia
Supply of PVC Pipe 160 mm Dia
Supply of PVC bend 40 mm dia
Supply of Guarding Material
Supply of Alkathene Tube 19 mm Dia and in coils of 30 Mtr
Supply of Double Pole TC set for erection of 25/63/100 kVA 4/5 star rated Transformers on PSCC Pole - 9 mtr Long, 300 kg WL - GI
Supply of Double Pole TC set for erection of 25/63/100 kVA 4/5 star rated Transformers on RCC Pole - 9 mtr Long, 145 kg WL - GI
Supply of DP Set (2 Pole Structure kit) for RCC pole 9 Mtr long 145 Kg WL - GI
Supply of DP Set (2 Pole Structure kit) for PSCC pole 9 Mtr long 300 Kg WL - GI
Supply of 3 Pole Structure kit for RCC pole 9 Mtr long 145 Kg WL - GI
Supply of 3 Pole Structure kit for PSCC pole 9 Mtr long 300 Kg WL - GI
Supply of Single Pole Mounted Transformer Kit for erection of transformer on 11Mtr Spun pole with Three H Frames without tranformer seating and seating Angle support cross arm for 63/100/250/500 kVA ...
Supply of 1.1 kV, 3 Phase Aerial Bunched Cable of size 3x95+1x16+1x70 Sqmm
Supply of Three Phase Distribution box for 6 Connections
Supply of Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Service Connections
Supply of Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connections
Supply of Suspension Clamp Assembly 16 to 70 mm (Excluding pole clamp and Eye Hook )
Supply of Pole clamp for HT/LT AB cable
Supply of Eye Hook (Flat type) for fixing Clamps
Supply of Dead End Clamp/Anchor Clamp Assembly 25 to 95 Sqmm (excluding pole clamps and Eye hook)
Supply of Universal Hook, Bolts and nuts
Supply of T-connector KZ3 95
Supply of Cable Straight thru joints suitable for 95 Sqmm LT ABC
Supply of Pre Insulated lugs CPTAU for 95 Sqmm
Supply of End cap for 50/70 Sqmm
Supply of Nylon Cable Tie (100 Nos) for LT ABC
Supply of 1.1 kV, XLPE, 3.5C X 240 Sq. mm LTUG Cable
Supply of 1.1 kV, XLPE, 3.5C X 185 Sq. mm LTUG Cable
Supply of 1.1 kV, XLPE, 3.5C X 120 Sq. mm LTUG Cable
Supply of 1.1 kV, XLPE, 3.5C X 95 Sq. mm LTUG Cable
Supply of 1.1 kV, XLPE, 4C X 16 Sq. mm LTUG Cable
Supply of 8 way HRC Fuse Based Thermoset Plastic LT Feeder Pillar Box
Supply of 8 way HRC Fuse Based Thermoset Plastic LT Feeder Pillar Box
Supply of HS Type Straight through jointing kit suitable for 10-16 Sqmm 1.1 kV class LTUG Cable
Supply of HS Type Straight through jointing kit suitable for 50 to 95 Sqmm 1.1 kV class LTUG Cable
Supply of HS Type Straight through jointing kit suitable for 120 to 225 Sqmm 1.1 kV class LTUG Cable
Supply of HS Type Straight through jointing kit suitable for 240 to 300 Sqmm 1.1 kV class LTUG Cable
Supply of 11 kV, 3x95 Sqmm XLPE UG Cable (Round Armoured)
Supply of 11kV, 3x240 Sqmm XLPE UG Cable (Round Armoured)
Supply of 11 kV, 3x400 Sqmm XLPE UG Cable (Round Armoured)
Supply of Straight Through Jointing Kits HS Type suitable for 95 Sqmm Cable
Supply of Straight Through Jointing Kits HS Type suitable for 3x240 Sqmm Cable
Supply of Straight Through Jointing Kits HS Type suitable for 3x400 Sqmm Cable
Supply of Cable Termination Kit Outdoor HS Type Suitable for 95 Sqmm Cable
Supply of Cable termination kit Outdoor HS Type Suitable for 3x240 Sqmm Cable
Supply of Cable Termination Kit Outdoor HS Type Suitable for 3x400 Sqmm Cable
Supply of Cable Termination Kit Indoor HS Type Suitable for 95 Sqmm Cable
Supply of Cable termination kit Indoor HS Type Suitable for 3x240 Sqmm Cable
Supply of Cable Termination Kit Indoor HS Type Suitable for 3x400 Sqmm Cable
Supply of Cable covering tiles 125x250x40 mm
Supply of Cable covering tiles 125x125x40 mm
Supply of Sand M Sand
Supply of RCC Hume Pipe, 2000 mm Long, 150 mm Dia
Supply of RCC Hume Pipe, 2000 mm Long, 200 mm Dia
Supply of Collars for RCC Hume Pipe 150mm Dia
Supply of Collars for RCC Hume Pipe 200mm Dia
Supply of GI Pipe, 150 mm Dia for drain crossing, cable raising etc.,
Supply of GI Pipe, 100 mm Dia for drain crossing, cable raising etc.,
Supply of Route and Joint Indicating Stones
Supply of Earthing Materials: GI Grounding pipe, B - Class, 42mm dia, 2.5mtrs long, 3.2mm thick with bolts nuts, GI Strips and washers complete. Minimum Weight of GI Pipe: 7.3 Kgs. Good Quality well b...
Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter for 25kVA-without meter.
Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter for 63kVA-without meter.
Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter for 100kVA-without meter.
Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter for 250kVA-without meter.
Supply of LT Electronic Tri-Vector Meter 3 Phase, 4 wire, 0.5 Accuracy Class
Supply of Sheet Metal/Deep Drawn Street Light Metering Box with Automatic Control Swith, Contactors with Single Phase 5 30 Amps meter and 50/5A CT including wiring
Supply of Compact 5 Way, (2OD + 3VL), One Incomer + Three Breaker + One out going RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427
Supply of Compact 4 Way, (2OD + 2VL), One Incomer + Two Breaker + One out going RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427
Supply of Compact 3 Way, (2OD + 1VL,) One Incomer + One Breakers + One outgoing RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427
Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427 : 1 OD/VL, 350 MVA, 630 Amps
Bed Concreting with CC 1:2:4 (M-15) Using 20mm Nominal size graded crushed coarse aggregates for RMU
Foundation with Reinforcement CC 1:2:4 (M-15) Using 20mm Nominal size graded crushed coarse aggregates for RMU
Providing Reinforcement TMT Fe 550/550D for RMU
Providing Plinth with CC 1:2:4 on the Stone Masonary (M-15) Using 20mm Nominal size graded crushed coarse aggregates for RMU
Construction of Stone Masonary for RMU
Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., complete for RMU
Supply of Rod type earthing with 40 mm Dia, 3 Mtr long MS rod as per specification and drawing including digging of pit and fixing
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc.,
Supply of Full threaded bolts and nuts of different sizes - GI
Labour charges for erection of PSCC Pole - 9 Mtr Long, 300 Kg WL in a pit of 1.8 Mtr depth including digging of pit.
Labour charges for erection of PSCC Pole-9 Mtr 200Kg WL in a pit of 1.8 Mtr depth including digging of pit.
Labour charges for erection of PSCC Pole - 8 Mtr Long, 200 Kg WL in a pit of 1.5 Mtr depth including digging of pit.
Labour charges for erection of RCC Pole-9 Mtr 145Kg WL in a pit of 1.8 Mtr depth including digging of pit.
Labour charges for erection of RCC Pole - 8 Mtr Long, 115 Kg WL in a pit of 1.5 Mtr depth including digging of pit.
Labour charges for erection of 11 Mtr long Concrete Spun Pole in a pit of 2.5 Mtr depth including digging of pit.
Base concreting 1:2:4, 1000x1000x150 mm for Spun pole
Pole concreting 1:2:4, 1000x1000x2500 mm for Spun pole
Coping 1:2:4 (as per actuals) for Spun pole
Spun Pole Painting (supplying & applying two coats of
enamel paints to 11 Mtr Spun Pole) and painting
Labour charges for fixing of 2 Pin cross arm with insulator and Braces
Labour charges for fixing of 4 Pin cross arm with insulator and Braces
Labour charges for fixing of V-shape/Horizontal cross arm including Single top support Brace and Insulator
Labour charges for fixing of 4 Pin double cross arm with insulator and Braces
Labour charges for fixing of HT/LT Single Top Support
Labour charges for fixing of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - GI
Labour charges for fixing of 11 kV, Horizontal Cross Arm with clamps, HTST Supports, bolts, nuts and washers for PSCC Pole 300 Kg WL - GI
Labour charges for fixing of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for PSCC Pole 200 Kg WL -GI
Labour charges for fixing of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for PSCC Pole 140 Kg WL - GI
Labour charges for fixing of LT 4 Pin Cross Arm with clamps, bolts, nuts and washers for RCC Pole - GI
Labour charges for fixing of LT 4 Pin Cross Arm with clamps, bolts, nuts and washers for PSCC Pole 200 Kg WL - GI
Labour charges for fixing of LT 4 Pin Cross Arm with clamps, bolts, nuts for PSCC Pole 300 Kg WL - GI
Labour charges for fixing of LT 4 Pin Cross Arm with clamps, bolts, nuts for PSCC Pole 140 Kg WL - GI
Labour charges for fixing of LT 2 Pin Cross Arm with clamps, bolts, nuts and washers for RCC Pole - GI
Labour charges for fixing of LT 2 Pin Cross Arm with clamps, bolts, nuts and washers for PSCC Pole 200 Kg WL - GI
Labour charges for fixing of LT 2 Pin Cross Arm with clamps, bolts, nuts for PSCC Pole 300 Kg WL - GI
Labour charges for fixing of LT 2 Pin Cross Arm with clamps, bolts, nuts for PSCC Pole 140 Kg WL - GI
Labour charges for fixing of Special cross arm with cross arm for EG Stirrups, braces,clamps, bolts nuts and washers complete
Labour charges for fixing of Spiral Earth Electrode
Labour charges for fixing of EG Stirrups with GI wire lacing (set of 2 Nos)
Labour charges for fixing of Guy Set along with diffing of pit in ordinary soil
Labour charges for Guy Concreting with Boulders, Mud & Sand (300x300x450 mm)
Labour charges for stringing of Rabbit ACSR Conductor
Labour charges for stringing of Coyote ACSR Conductor
Labour charges for fixing of 11 kV, Solid Core Type HG Fuse Unit (set of 3 Nos.)
Labour charges for fixing of 11 kV, 200 Amps, Single Break GOS
Labour charges for fixing of 11 kV, 400 Amps Double Break GOS
Labour charges for fixing of H-Frame for mounting GOS
Labour charges for fixing of DOLO Cut Out (set of 3 Nos.)
Labour charges for fixing of 10 kV, 5 kA Polymeric Type lightning arrestor with ground disconnector (set of 3 Nos.)
Labour charges for fixing of Caution/Danger Board
Labour charges for fixing of Anti Climbing Device (12 Mtr GI Barbed Wire)
Providing guarding between HT & LT line up to a Span of 40 M (Including labour for fixing of necessary cross arms) (per span)
Providing guarding between HT & LT line above 40 M span (Including labour for fixing of necessary cross arms) (per span)
Providing guarding for HT & LT line at Road crossings,Telephone line crossings etc up to span of 60 M (Including labour for fixing of necessary cross arms)per span
Labour charges for fixing of LT Protection Kit
Labour charges for fixing of LT Distribution box for 100 kVA DTC with MCCB's (Sheet metal)
Labour charges for fixing of LT Distribution box for 250 kVA DTC with MCCB's (Sheet metal)
Labour charges for wiring of one circuit of LT Wiring for 25/63/100 kVA DTC to the existing LT protetion kit/Distribution Box via metering box (includes fixing of necessary supports like 2 pin cross a...
Labour charges for wiring of two circuits of LT Wiring for 25/63/100 kVA DTC to the existing LT protetion kit/Distribution Box via metering box (includes fixing of necessary supports like 2 pin cross ...
Labour charges for wiring of one circuit of LT Wiring for 250/500 kVA Transformers via metering box (includes fixing of necessary supports like 2 pin cross arm, spacer etc)
Labour charges for fixing of LT Metering box with CTs and necessary wiring for housing ETV Meter - without meter.
Labour charges for fixing of LT Electronic Tri-Vector Meter 5 Amps, -0.5/1.0 Accuracy Class
Labour charges for fixing of LT line spacer
Labour charges for fixing of Fish Plate with necessary Clamps, bolts and nuts etc complete - GI for RCC Pole
Labour charges for fixing of Fish Plate with necessary Clamps, bolts and nuts etc complete - GI for PSCC Pole 140 KG WL
Labour charges for fixing of Fish Plate with necessary Clamps, bolts and nuts etc complete - GI for PSCC Pole 200 KG WL
Labour charges for fixing of Fish Plate with necessary Clamps, bolts and nuts etc complete - GI for PSCC Pole 300 KG WL
Labour charges for erection of DP Transformer Structure using 9 Mtr long RCC (145 Kg WL)/PSCC(300 Kg WL) pole including fixing of structure materials, erection of poles etc., completing for mounting o...
Labour charges for erection of DP Transformer Structure using 9 Mtr long RCC (145 Kg WL)/PSCC(300 Kg WL) pole including fixing of structure materials, erection of poles etc., completing for mounting o...
Labour charges for erection of DP Transformer Structure using 9 Mtr long RCC (145 Kg WL)/PSCC(300 Kg WL) pole including fixing of structure materials, erection of poles etc., completing for mounting o...
Labour charges for DP Structure using RCC/PSCC Pole 9 to 10 Mtr Long
Labour charges for DP Structure using RCC/PSCC Pole 7.5/8 Mtr Long
Labour charges for erection of 3 Pole Structure using 9 Mtr long RCC /PSCC pole with platform for mounting 100 to 500 kVA Transformer, including fixing of structure materials, erection of poles etc.,
Labour charges for erection of Single Pole Mounted Transformer Kit for erection of transformer on 11Mtr Spun pole with Three H Frames without tranformer seating and seating Angle support cross arm fo...
Labour charges for erection of 1.1 kV, 3 Phase Aerial Bunched Cable of size 3x95+1x16+1x70 Sqmm
Labour charges for fixing of Three Phase Distribution box for 6 Connections
Labour charges for fixing of Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Service Connections
Labour charges for fixing of Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connections
Labour charges for fixing of Suspension Clamp Assembly 16 to 70 mm (Excluding pole clamp and Eye Hook )
Labour charges for fixing of Pole clamp for HT/LT AB cable
Labour charges for fixing of Dead End Clamp/Anchor Clamp Assembly 25 to 95 Sqmm (excluding pole clamps and Eye hook)
Labour charges for fixing of Universal Hook, Bolts and nuts
Labour charges for fixing of T-connector KZ3 95
Labour charges for fixing of Cable Straight thru joints suitable for 95 Sqmm LT ABC
Labour charges for fixing of Pre Insulated lugs CPTAU for 95 Sqmm
Labour charges for fixing of End cap for 50/70 Sqmm
Labour charges for Laying of cable in existing trench/GI Pipe/Stone ware/RCC hume pipe for 3x95 to 150 Sqmm HT Cable
Labour charges for Laying of cable in existing trench/GI Pipe/Stone ware/RCC hume pipe for 3x185 to 240 Sqmm HT Cable
Labour charges for Laying of cable in existing trench/GI Pipe/Stone ware/RCC hume pipe for 3x300 to 500 Sqmm HT Cable
Labour charges for Laying of cable in existing trench/GI Pipe/Stone ware/RCC hume pipe for 2.5 to 25 Sqmm LT Cable
Labour charges for Laying of cable in existing trench/GI Pipe/Stone ware/RCC hume pipe for 35 to 95 Sqmm LT Cable
Labour charges for Laying of cable in existing trench/GI Pipe/Stone ware/RCC hume pipe for 120 to 240 Sqmm LT Cable
Labour charges for laying of UG cable by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site - Normal Soil 5/6" Bore
Labour charges for Cable trench excavation, 1000x0.6x1=600, Ordinary soil
Refilling and consolidation
Labour charges for Heat shrinkable Straight Through Joint for 3x95 to 150 Sqmm HTUG cable.
Labour charges for Heat shrinkable Straight Through Joint for 3x185 to 240 Sqmm HTUG cable.
Labour charges for Heat shrinkable Straight Through Joint for 3x300 to 400 HTUG Sqmm
Labour charges for Heat shrinkable Type Terminations for 3x95 to 150 Sqmm HTUGcable
Labour charges for Heat shrinkable Type Terminations for 3x185 to 240 Sqmm HTUG cable
Labour charges for Heat shrinkable Type Terminations for 3x300 to 400 Sqmm HTUG cable
Labour charges for Heat shrinkable Type Terminations for 2.5 to 25 Sqmm LTUG cable
Labour charges for Heat shrinkable Type Terminations for 35 to 95 Sqmm LTUG cable
Labour charges for Heat shrinkable Type Terminations for 120 to 240 Sqmm LTUG cable
Labour charges for Heat shrinkable Type Terminations for 2.5 to 25 Sqmm LTUG cable
Labour charges for Heat shrinkable Type Terminations for 35 to 95 Sqmm LTUG cable
Labour charges for Heat shrinkable Type Terminations for 120 to 240 Sqmm LTUG cable
Labour charges for erection of 8/12 ways (thermoset plastic enclosure) LT Feeder piller box
Labour charges for Covering the cable with tile
Labour charges for spreading and forming with sand all round the cable to a depth of 75 mm and width of 500 mm
Labour charges for Laying of RCC Hume pipe
Labour charges for Laying of GI Pipe
Labour charges for Laying of Route and Joint indicating stone
Labour charges for Earthing materials pipe type for grounding (Single Electrode with accessories)
Labour charges for Fixing of Sheet Metal/Deep Drawn Street Lighting Metering Box with Automatic Control Swith, Contactors with Single Phase 5-30 Amps Meter & 50/5A CT including wiring
Labour charges for fixing of 1 phase/3 phase deep drawn meter box
Labour charges for Earth Excavation for RMU Foundation depositing of earth on bank up to a lead of 50 mtrs and with a lift up to 1.5 mtrs
Labour charges for Fixing foundation frame of MS channel 100x50mm and MS angle 40x40x5mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...
Labour charges for erection of 11kV/433V, 25 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 4/5 Star Rated with Oil
Labour charges for erection of 11kV/433V, 63 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 4/5 Star Rated with Oil
Labour charges for erection of 11kV/433V, 100 kVA, 3 Phase 50 Cys Distribution Transformer BEE - 4/5 Star Rated with Oil
Labour charges for erection of 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 4/5 Star Rated with oil
Labour charges for Releasing of Baliga pole
Labour charges for Releasing & Refixing of over head service mains (single or 3 phase) for consumer
Labour charges for Releasing of 2/4 ACSR conductor
Labour charges for Releasing of Rabbit ACSR conductor
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Sec iii GCC_chit.docx
Others - GCC • 0.06 MB
Sec v SCC_chit.docx
Others - SCC • 0.05 MB
Sec iv ecc (a)_chit.docx
Others - ECC • 0.04 MB
Sec vi Annexures_Chit.docx
Others - Annexures • 0.04 MB
Sec ii ITB_chit.docx
Others - ITB • 0.06 MB
Sec i IFB_Chit.docx
Others - IFB • 0.07 MB
Techno-commercial sheets_chit.xls
Techno-Commercial Worksheet • 0.16 MB
Dwg-20, DOLO Cut Out.pdf
Others - Specifications • 0.05 MB
Dwg-21, HG Fuse Unit.pdf
Others - Specifications • 0.07 MB
Dwg-22, 400A DB GOS R-4.pdf
Others - Specifications • 0.10 MB
Dwg-23 200A SB GOS R-6.pdf
Others - Specifications • 0.09 MB
Dwg-25, Earth Guard Stirrup.pdf
Others - Specifications • 0.03 MB
Dwg-27, GI Grounding Pipe.pdf
Others - Specifications • 0.04 MB
Dwg-30, RCC Pole Clamps.pdf
Others - Specifications • 0.05 MB
Dwg-32, Four Pin & Two Pin Cross arms.pdf
Others - Specifications • 0.05 MB
Dwg-34, Pipe Earth Electrode.pdf
Others - Specifications • 0.20 MB
Dwg-40,Danger Board.pdf
Others - Specifications • 0.10 MB
Dwg-43, PG Clamps.pdf
Others - Specifications • 0.04 MB
Dwg-45, 11Mtr 500kg WL Spun Pole.pdf
Others - Specifications • 0.08 MB
Dwg-52, GI Pin for 11kV & 1.1kV Pin Insulators.pdf
Others - Specifications • 0.04 MB
Dwg-59 Clamps for 9Mtr 300kg PSCC pole.pdf
Others - Specifications • 0.05 MB
Dwg-60, 10kV 5kA Polymeric LA with Ground disconnector.pdf
Others - Specifications • 0.05 MB
Dwg-79, Route & Joint Marker (1).pdf
Others - Specifications • 0.04 MB
Dwg-79-DAS RMU Foundation 5 Way REV-00-Model.pdf
Others - Specifications • 0.80 MB
Dwg-80, Route & Joint Marker (2).pdf
Others - Specifications • 0.04 MB
Dwg-80-DAS 3Way RMU Foundation REV-00-Model.pdf
Others - Specifications • 0.70 MB
Dwg-85-REV-00- 250kVA LT SMC DB.pdf
Others - Specifications • 0.08 MB
Dwg-86-REV-00-100kVA LT SMC DB.pdf
Others - Specifications • 0.08 MB
LT AB Cable Accessories Specfn.doc
Others - Specifications • 0.32 MB
LT AB Cable Specification.doc
Others - Specifications • 0.15 MB
LT XLPE UG cable technical specification.docx
Others - Specifications • 0.06 MB
PCC poles_technical_specifications.doc
Others - Specifications • 0.06 MB
PSCC 300kg.doc
Others - Specifications • 0.08 MB
Revised HG fuse unit.doc
Others - Specifications • 0.05 MB
Revised tech spec 45kn composite polymer insulator(proc).doc
Others - Specifications • 0.11 MB
Revised Tech Spec DOLO convn.doc
Others - Specifications • 0.05 MB
Revised Tech Spefn DPTC 25 63kva.doc
Others - Specifications • 0.03 MB
revised Tec-Spec for coyote Conductors.doc
Others - Specifications • 0.15 MB
Specf for Guy wire.docx
Others - Specifications • 0.05 MB
SPECIFICATION FOR GI wire.docx
Others - Specifications • 0.05 MB
Specification for HT UG Cables.doc
Others - Specifications • 0.23 MB
specification of lt lead wire.doc
Others - Specifications • 0.04 MB
SPECIFICATON FOR ANCHOR RODS FOR USE IN GUY SET.docx
Others - Specifications • 0.01 MB
tech spec 11kv pin polymer.docx
Others - Specifications • 0.05 MB
tech spec 45kn composite polymer insulator.doc
Others - Specifications • 0.10 MB
Tech Spec HG fuse unit.doc
Others - Specifications • 0.03 MB
Tech Spec LT Protection kit.doc
Others - Specifications • 0.05 MB
Tech Specfn DP TC Set.doc
Others - Specifications • 0.06 MB
tech_spec_of_GI _bolts_and_nuts.doc
Others - Specifications • 0.10 MB
Technical Spec for 11 KV Compact RMU.doc
Others - Specifications • 0.26 MB
TECHNICAL SPECIFICATION FOR COMPOSITE INSULATORS.doc
Others - Specifications • 0.12 MB
TECHNICAL SPECIFICATION FOR RCC Poles (1).docx
Others - Specifications • 0.02 MB
Technical specifications Spun poles.doc
Others - Specifications • 0.07 MB
technical specs no 15 strain insulators.doc
Others - Specifications • 0.04 MB
Technical Specs-pole clamps.doc
Others - Specifications • 0.06 MB
TS - 1.1KV pin Insulator.docx
Others - Specifications • 0.02 MB
TS - 8&9M PSCC.docx
Others - Specifications • 0.02 MB
Ts- 2pin 4pin cross arms.docx
Others - Specifications • 0.02 MB
TS- Galvanised structure Mareials.docx
Others - Specifications • 0.04 MB
TS- Horizontal cross arm.docx
Others - Specifications • 0.02 MB
TS- LAs, 10kA.docx
Others - Specifications • 0.04 MB
TS- LTD metal box for 100 & 250kva-60kA.docx
Others - Specifications • 0.02 MB
TS OF 1.1 kV GI PINS.docx
Others - Specifications • 0.01 MB
TS- Special 3 pin.docx
Others - Specifications • 0.02 MB
TS- Spiral earth electrode.docx
Others - Specifications • 0.01 MB
TS- structural materials.docx
Others - Specifications • 0.02 MB
TS-25,63,100kVA PSCC DPTC set.docx
Others - Specifications • 0.01 MB
TS-250kVA PSCC DP TC Set.doc
Others - Specifications • 0.07 MB
11 KV Pin Insulator Tech Specification.DOC
Others - Specifications • 0.04 MB
11 KV UG CABLE ,jointing kit,cable termination.docx
Others - Specifications • 0.02 MB
11kV UG cable laying diagram.pdf
Others - Specifications • 0.26 MB
DP SET specs.doc
Others - Specifications • 0.04 MB
Dwg -31 PSCC pole 140kg WL pole clamps.pdf
Others - Specifications • 0.04 MB
Dwg- 49, 8Mtr 200Kg PSCC Pole.pdf
Others - Specifications • 0.08 MB
Dwg- 50, 9Mtr 200Kg PSCC Pole.pdf
Others - Specifications • 0.07 MB
Dwg- 55, 9Mtr 300Kg PSCC Pole.pdf
Others - Specifications • 0.07 MB
Dwg -78 Non DAS 3 Way RMU Foundation-REV-00-Model.pdf
Others - Specifications • 0.65 MB
Dwg -87 PSCC 200kg WL Pole clamps.pdf
Others - Specifications • 0.04 MB
Dwg-03, Special 3 Pin Cross arm.pdf
Others - Specifications • 0.04 MB
Dwg-04, Horizontal cross arm with HTST support.pdf
Others - Specifications • 0.05 MB
Dwg-07, Guy Set.pdf
Others - Specifications • 0.09 MB
Dwg-10, LTP Kit upto 100kVA.pdf
Others - Specifications • 0.10 MB
Dwg-15, Earth Pits & Connections for DTC.pdf
Others - Specifications • 0.05 MB
Dwg-19, Spiral Earth Electrode.pdf
Others - Specifications • 0.22 MB
Sec iv ecc-chit.pdf
Others - ECC • 19.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .