Loading
Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹3.2 L
Closing Date
5 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
15 conditions · 4 needing a document upload
Financial Eligibility Criteria : The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of work: - "Works of wiring /cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements earthings etc. (with or without supply of items/equipments) for 230 V, 1 phase or 415 V, 3 phase system or higher voltages." (Ref: Hqrs Lr.No:E.29/P/Similar nature of works Dt: 30.12.2014.)
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
Eligibility Criteria: For Electrical Works up to 650 V : The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected. (Ref: Hqrs Lr.No:E.29/P/Similar nature of works Dt: 07.05.2026.)
37 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The General Conditions of Contract governing the performance of the works covered by this tender are the Indian Railway Standard General Conditions of Contract as amended from time to time up to date. A soft copy of the Indian Railway Standard General conditions of Contract is uploaded in the annexed documents to the tender. Hard copy may be perused in the office of the Senior Divisional Electrical Engineer/Maintenance/ Secunderabad Division/ South Central Railway / Secunderabad - 500025. In submitting the tender it would be deemed that the tenderer has kept himself fully Informed of the provision of the Indian Railways Standard General Conditions of Contract including all corrections and Amendments issued upto date and claim that he is not aware of any amendment or correction slip to the IRSGCC shall not be entertained.(As per IRGCC April 2022 or latest with amendments).
STUDY OF DRAWINGS AND LOCAL CONDITIONS: The drawings for the works can be seen in the office of the Senior Divisional Electrical Engineer/Maintenance/ Secunderabad Division/ South Central Railway/ Secunderabad - 500025. It should be noted that these drawings are meant for general guidance only and Railway may suitably modify them during the execution of work according to the circumstances without making the Railways liable for any claims on account of such changes. If there is any variation between the description in the tender and the detailed plans, the Engineer-in-Charge will operate the correct description and his decision is final and binding on the tenderer/ Contractor. The Tenderer/Contractor is required to inspect the sites of works and acquaint himself with the site conditions, availability of approaches for transporting of men and materials, space and other factors relating to the works, availability of labour, electricity and water, etc., before quoting his rates. The extent of lead and lift involved in the execution of works and any difficulties involved in the execution of work should also be examined before formulating the rates for complete items of works described in the schedule. The Tender submitted will be deemed to have been made after such inspection.(As per IRGCC April 2022 or latest with amendments).
DRAWINGS FOR WORKS: The percentage rates for the schedule items and itemized rates for the non-scheduled items quoted by the tenderer as may be accepted by the railways will, hold good irrespective of any changes, modifications, alterations, additions, omissions in the locations of structures and detailed drawings, specifications and/or the manner of executing the work. It should be specifically noted that some of the detailed drawings may not have been finalised by the Railway and will, therefore, be supplied to the contractor as and when they are finalised on demand. No compensation whatsoever on this account shall be payable by the Railway Administration. No claim whatsoever will be entertained by the Railway on account of any delay or hold up of the works arising out of delay in approval of drawings, changes, modifications, alterations, additions, omission and the site layout plans or detailed drawings and design and/or late supply of such material as are required to be arranged by the Railway or due to any other factor on Railway Accounts.(As per IRGCC April 2022 or latest with amendments).
Manual tenders sent by Post/FAX/Courier or in Person SHALL NOT BE ACCEPTED (As per IRGCC April 2022 or latest with amendments).
If the Bid of a Tenderer is seriously unbalanced in relation to the Engineer's estimate of the cost of work to be performed under the contract, the Railways may require the tenderer to produce detailed price analysis for any or all items of the Tender Schedule, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed. (As per IRGCC April 2022 or latest with amendments).
CORRIGENDUM NOTICE ON IREPS: [I] Railway may modify the tender document by issuing online corrigendum through www.ireps.gov.in [II] Prospective Bidders shall keep watch for CORRIGENDUM upto 15 days prior to the deadline for submission of bids. For the purpose of CORRIGENDUM in the tender, NIT period is splitted as under: (a) ADVERTISEMENT PERIOD: The time during which all information pertaining to tender shall be available but offers cannot be submitted (b) OFFER SUBMISSION PERIOD: 15 days prior to closing of tender, during which tenderers can submit their offer. [III] To give prospective bidders a reasonable time on account of CORRIGENDUM in preparing their bids, the Railways may at their discretion extend as necessary, the deadline for submission of Tender document. Railways decision will be final and no correspondence will be entertained from prospective bidders. (As per IRGCC April 2022 or latest with amendments).
E-Tender shall be rejected if it is not accompanied by the prescribed: [1] Cost of tender document [2] EMD [3] Certificate(s) in support of technical eligibility criteria [4] Certificate(s) in support of financial eligibility criteria [5] Copy of documents in support of Proprietary concern/ Partnership firm / Pvt.Ltd.company / Limited Company / JV firm / Valid MOU for JV firms as detailed in COMMERCIAL COMPLIANCE. (As per IRGCC April 2022 or latest with amendments).
The bidders/tenderers should ensure that they are GST compliant. Quoted rates are inclusive of applicable GST as per GST ACT -2017 amended from time to time and as detailed in Special Conditions - General (under TAXES clause). (As per IRGCC April 2022 or latest with amendments).
The tenderer[s] may also upload the following documents alongwith his/their tender: The tenderer may upload method statement, which shall contain organizational set up and working systems to be adopted by the successful tenderers during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and inturn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall adhere to the time frame as mentioned in mile stone chart prescribed in the tender. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall engage the personnel with requisite qualification as per Special Conditions of Contract. (As per IRGCC April 2022 or latest with amendments).
Tenderer shall deploy adequate number of plant and equipment for the execution of subject contract works to achieve progress as per mile stone chart. (As per IRGCC April 2022 or latest with amendments).
List of works completed in the last seven financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given. (As per IRGCC April 2022 or latest with amendments).
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award. (As per IRGCC April 2022 or latest with amendments).
Supportive documents/certificates from the organizations with whom they worked/are working as list of works completed and list of works on hand should be enclosed. (As per IRGCC April 2022 or latest with amendments).
[1] I/We have read the various conditions of the tender attached hereto and hereby agree to abide by the said conditions. I/We also agree to keep this tender open for acceptance for the period mentioned in the tender document [NIT HEADER] from the date fixed for opening the same and in default thereof, I/We will be liable for forfeiture of my/our Earnest Money Deposit submitted. [2] I/We offer to do the work at the percentage rates quoted by me/us in the attached schedule and bind myself/ourselves to complete the work within the period of completion given in this tender document [NIT HEADER] from the date of issue of letter of acceptance of this tender. I/We also hereby agree to abide by the IRS GCC and Special Conditions of contract in carryingout the works laid down by South Central Railway for the present contract. [3] The full value of the earnest money paid shall stand forfeited without prejudice to any other rights or remedies of the railway if [a]I/We do not execute the contract document within seven days after receipt of notice issued by the Railway that such documents are ready: OR [b] I/We do not commence the work within fifteen days after receipt of orders to that effect. [4] Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work. (As per IRGCC April 2022 or latest with amendments).
I/We fail to submit the requisite Performance Guarantee [P.G] in the prescribed format within the time limit as prescribed in GCC (as amended from time to time) from the date of issue of Letter of Acceptance, we are aware that the contract shall be terminated duly forfeiting EMD and other dues, if any payable against the contract. Also, I/We shall be debarred from participating in the retender for the work. (As per IRGCC April 2022 or latest with amendments).
I/We understand that no post-tender correspondence will be entertained, however, if any clarification is required by the Railway, the same will be sought from the tenderer. Also, I/We are aware that any Certificate/ Documents offered after the tender opening shall not be given any credit and shall not be considered. (As per IRGCC April 2022 or latest with amendments).
I/we do hereby solemnly affirm and state on behalf of the tenderer including its constituents as under: (As per IRGCC April 2022 or latest with amendments).
[i] I/We the tenderer(s) am/are signing this document after carefully reading the contents. [ii] I/We declare and certify that I/We have not made any misleading or false representation in the documents, forms, statements attached in proof of the qualification requirements. [iii] I/We also understand that my/our offer will be evaluated based on the documents/credentials uploaded alongwith the offer and the same shall be binding upon me/us. [iv] I/We declare that the information and the documents attached alongwith the tender by me/us are correct and I/We are fully responsible for the correctness of the information and the documents submitted by us. (As per IRGCC April 2022 or latest with amendments).
[i] I/We do hereby undertake that, if any of the certificates regarding eligibility criteria submitted by us are found to be forged/false/incorrect at any time during the process of evaluation of the tenders, it shall lead to forfeiture of the tender EMD. Further, I/We and all my/our constituents understand that my/our offer shall be summarily rejected. [ii] I/We also understand that, if the certificates submitted by us are found to be false/forged/ incorrect at any time after the award of the contract, it will lead to termination of the contract besides suspending of business for 5 years, with the tenderer and with all the partners in case of partnership firm and with all the members of a JV in case of a Joint Venture, forfeiture of EMD/SD and Performance Guarantee and any other action provided in the contract. (As per IRGCC April 2022 or latest with amendments).
It is certified that I/We have not been blacklisted or debarred by railways or any other ministry/ department/public sector undertaking of the government of India/State Government from participation in tenders/contract on the date of tender opening of bids, either in individual capacity or as a member of JV firm in which I/We were/are members. (As per IRGCC April 2022 or latest with amendments).
I/We indemnify and save harmless the Railway from and against all actions, suit proceedings losses, costs, damages, charges, claims and demands of every nature and description brought or recovered against the Railways by reason of any act or omission of the Contractor, his agents or employees, in the execution of the works or in his guarding of the same. All sums payable by way of compensation under any of these conditions shall be considered as reasonable compensation to be applied to the actual loss or damage sustained, and whether or not any damage shall have been sustained. (As per IRGCC April 2022 or latest with amendments).
The prices are inclusive of GST
Secunderabad Division Electrical Maintenance Department - (i) DLS/KZJ - Provision of VDC flooring in the existing Under Truck and Bench sections of size 123x28 sq.m (ii) DLS/KZJ - Construction of Room of size 25x6 sq.m for Airbrake section attached to Light Repair bay shed towards SC end (iii) DSL/KZJ - Construction of new two store building of size 20x7 sq.m with stairway, for general stores (iv) DSL/KZJ - Provision of Vehicle Parking Facilities of size 52x14 sq.m and Construction of additional Gents Toilets of size 5x3 sq.m (v) DLS/KZJ - Construction of Supervisor's rest room on existing staff canteen building of size 14.6x8sq.m (vi) DLS/KZJ - Construction of Annexure Building for Electronic Lab of size 10x7 sq.m (vii) DLS/KZJ - Construction of Rooms of size 40x6 sq.m for E2 and E5 sections, attached to Express bay shed (viii) DLS/KZJ: Setting up rain water leakage testing facility as per RDSO SMI No.315 - Electrical arrangements.
E-M-SC-40-OT-2026-27~SCR
E-M-SC-40-OT-2026-27
Open
Works - General
6 Months
Hyderabad, Telangana
₹0
₹3.2 L
12 Sept 2026
12 Sept 2026
21 Sept 2026
263 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,62,00,132.16 | ||
| — | 19.00 | — | — | ||
| Concrete for foundations and plinth in other than hard soil and rock | — | — | — | 76,057 | |
| — | 43.00 | — | — | ||
| Concrete for foundations and plinth in hard soil. | — | — | — | 1,84,556 | |
| — | 1650.00 | — | — | ||
| Supply and erection of 50mm size of HDPE pipe of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995 (SDR - 21) or Latest ammendments | — | — | — | 1,50,150 | |
| — | 2550.00 | — | — | ||
| Supply and erection of 63 mm size of HDPE pipe of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995 (SDR - 21) or Latest ammendments | — | — | — | 3,39,150 | |
| — | 200.00 | — | — | ||
| Supply and erection of 110 mm size of HDPE pipe of Grade PE-100, PN 6 (6Kg/Cm2 Capacity) with accessories as per IS 4984 - 1995 (SDR - 21) or Latest ammendments | — | — | — | 83,800 | |
| — | 500.00 | — | — | ||
| Supply and erction of 40mm of HDPE pipes of Grade PE-100, PN 16 (16Kg/Cm2 Capacity) with accessories as per IS 4984 - 2016 (SDR-21) or Latest ammendments | — | — | — | 95,500 | |
| — | 1200.00 | — | — | ||
| Supply and erection of 4 core 50 Sqmm LTUG XLPE aluminium armoured cable as per IS 7098 Part I or (latest ammendements) along with end terminations | — | — | — | 4,77,600 | |
| — | 1000.00 | — | — | ||
| Supply and erection of 4 core x25 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations | — | — | — | 2,44,000 | |
| — | 1450.00 | — | — | ||
| Supply and erection of 4 core x70 Sqmm LTUG XLPE Aluminum armored cable as per BIS specification IS 7098 Part I or (latest amendments ) along with end terminations | — | — | — | 8,06,200 | |
| — | 300.00 | — | — | ||
| Supply and erection of 4 core x 240 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or(latest amendments ) along with end terminations | — | — | — | 4,96,500 | |
| — | 800.00 | — | — | ||
| Supply and erection of 4 core x16 Sqmm LTUG XLPE Aluminium armoured cable as per BIS specification IS 7098 Part I or (latest ammendements ) along with end terminations | — | — | — | 1,40,800 | |
| — | 4950.00 | — | — | ||
| Supply and erection of 8 SWG GI wire | — | — | — | 49,500 | |
| — | 10.00 | — | — | ||
| Horizontal drilling of bores for HT/LT cables of suitable size as per the guideline of Site Engineer | — | — | — | 12,690 | |
| — | 2900.00 | — | — | ||
| Excavation of cable trench in all types of soils for LT cable as per the directions of engineer at site. | — | — | — | 3,77,000 | |
| — | 1550.00 | — | — | ||
| Excavation of cable trench incement concrete bed flooring as per the Rly specification No:C/E/UGC/1/92 & Drg No:SC/A3/STD/1288 Alt-I | — | — | — | 6,27,750 | |
| — | 20.00 | — | — | ||
| Excavation of cable trench across the track as per the Rly specification No:C/E/UGC/1/92& Drg No:SC/A3/STD/1288 Alt-I | — | — | — | 5,300 | |
| — | 120.00 | — | — | ||
| Supply & Erection of BLDC fans 1200mm sweep with remote as per specification enclosed | — | — | — | 2,95,200 | |
| — | 29.00 | — | — | ||
| Supply and erection of Modular type exhaust fan 300mm/380mm | — | — | — | 45,095 | |
| — | 30.00 | — | — | ||
| "Supply, fixing and connecting of window mount 12"" sweep Heav yduty exhaust fan made of Alloy steel of 50W with complete with allaccessories. | — | — | — | 78,870 | |
| — | 1200.00 | — | — | ||
| Supply & Erection of 19mm PVC rigid conduit pipes of 2mm thickness as per BIS- 9537 (latest) along with accessories. | — | — | — | 27,600 | |
| — | 5100.00 | — | — | ||
| Supply & Erection of 25mm PVC rigid conduit pipes of 2mm thickness as per BIS- 9537 (latest) along with accessories. | — | — | — | 1,47,900 | |
| — | 3400.00 | — | — | ||
| Supply & Erection of 32mm PVC rigid conduit pipes of 2mm thickness as per BIS- 9537 (latest) along with accessories. | — | — | — | 1,32,600 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testing of remote control BLDC Wall mounted fan of 35W; input voltage of 165- 285 V ; 400mm sweep, air delivery 76 cu.mm; speed 1500RPM; with all connecting accessories | — | — | — | 32,500 | |
| — | 1700.00 | — | — | ||
| Cutting and chipping the wall for laying the PVC conduit pipe and plastering after laying the PVC conduit pipe with cement and sand mortar mixed with 1:8 ratio, but without laying PVC conduit pipe. | — | — | — | 66,300 | |
| — | 102.00 | — | — | ||
| Supply & Erection of 3 module GI concealed sheet metal boxes | — | — | — | 5,304 | |
| — | 62.00 | — | — | ||
| Supply & Erection of 4 module GI concealed sheet metal boxes | — | — | — | 3,844 | |
| — | 112.00 | — | — | ||
| Supply & Erection of 6 module GI concealed sheet metal boxes | — | — | — | 9,520 | |
| — | 62.00 | — | — | ||
| Supply & Erection of 8 or 9 module GI concealed sheet metal boxes | — | — | — | 6,882 | |
| — | 112.00 | — | — | ||
| Supply & Erection of 12 module GI concealed sheet metal boxes | — | — | — | 15,344 | |
| — | 10.00 | — | — | ||
| Supply and erection 1 or 2 modular plates with frame | — | — | — | 530 | |
| — | 102.00 | — | — | ||
| Supply and erection 3 modular plates with frame | — | — | — | 6,732 | |
| — | 72.00 | — | — | ||
| Supply and erection 4 modular plates with frame | — | — | — | 6,408 | |
| — | 102.00 | — | — | ||
| Supply and erection 6 modular plates with frame | — | — | — | 12,648 | |
| — | 72.00 | — | — | ||
| Supply and erection 8 or 9 modular plates with frame | — | — | — | 11,448 | |
| — | 102.00 | — | — | ||
| Supply and erection 12 modular plates with frame | — | — | — | 20,196 | |
| — | 3900.00 | — | — | ||
| Supply and erection of 2Nos.. of 1.5 Sq.mm, o f FRLSH PVC multistrand copper wire | — | — | — | 1,32,600 | |
| — | — | — | insulated | ||
| — | 25500.00 | — | — | ||
| Supply and erection of 3Nos.. of 1.5 Sq.mm, o f FRLSH PVC multistrand copper wire including earth continuity wire . | — | — | — | 14,02,500 | |
| — | — | — | insulated | ||
| — | 7600.00 | — | — | ||
| Supply and erection of 2 Nos.. of 2.5 Sq.mm, 1No. 1.5 sq.mm of FRLSH PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 5,47,200 | |
| — | 3200.00 | — | — | ||
| Supply and erection of 2Nos.. of 4.0 Sq.mm, 1No. 2.5 sq.mm of FRLSH PVC insulated flexible multistrand copper wire including earth continuity wire . | — | — | — | 3,45,600 | |
| — | 750.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 4 sq. mm FRLSH Copper flexible cable | — | — | — | 37,500 | |
| — | 500.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 6 sq. mm FRLSH Copper flexible cable | — | — | — | 51,000 | |
| — | 960.00 | — | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 10 sq. mm FRLSH Copper flexible cable | — | — | — | 1,22,880 | |
| — | 300.00 | — | — | ||
| Supply and erection of CPVC pipe SDR-13.5 class -I pipe of size 20 mm (3/4 inch). | — | — | — | 34,410 | |
| — | 300.00 | — | — | ||
| Supply and erection of CPVC 20 mm dia (3/4 inch) straight plain coupling including fixing etc | — | — | — | 5,268 | |
| — | 40.00 | — | — | ||
| Supply and erection of CPVC 20 mm dia (3/4 inch) Tee including fixing etc | — | — | — | 1,245.6 | |
| — | 100.00 | — | — | ||
| Supply and fixing of metal clamp with suitable screws (length type) on concrete surface including provision of plugs with all accessories for CPVC 20 mm dia (3/4 inch). | — | — | — | 1,199 | |
| — | 100.00 | — | — | ||
| Supply and erection of cable junction box with terminals etc (size 93x93x62 mm) with IP66 integrated membrances for cable entry suitable for 20mm CPVC pipe. | — | — | — | 46,170 | |
| — | 20.00 | — | — | ||
| Supply and erection of GI junction box of size 12"x8"x6" with hylam sheet | — | — | — | 26,000 | |
| — | 20.00 | — | — | ||
| Supply and erection of sheet steel enclosure made out of 16 SWG MS sheet powder coated with hylam sheet, locking arrangements consisting of lx 32 A DP MCB powder coated paint and other connected accessories etc." | — | — | — | 17,000 | |
| — | 50.00 | — | — | ||
| Supply an erection of MS angle of size 1.5" x 1.5" 5mm thickness heavy guage including necessary hardware material for fixing the cable tray to cat walk with necessary supports at the site at regular interval of 1.5 mtr distance | — | — | — | 13,750 | |
| — | 280.00 | — | — | ||
| S u p p l y a n d erection o f 16W 3 directional LED Pit Light fitting with IP67 Protection(10W+4W+2W) aluminium diecast with IP67 Protection as per specification. . Note Prier Approval to be taken including all accessories. | — | — | — | 6,00,751.2 | |
| — | 50.00 | — | — | ||
| Supply a n d erection o f 16W 3 directional LED catwalk light fitting (4W+8W+4W) aluminium de cast with ip 67 protection works on 24V DC as per Specification. Note Prier Approval to be taken including all accessories. | — | — | — | 1,07,277 | |
| — | 40.00 | — | — | ||
| Design, supply and erectionof SMPS control Panel unit containing 3 nos of 24V 10A SMPS power supply units enclosed in sheet steel enclosure with all necessary accesorries. . Note Prier Approval to be taken including all accessories. | — | — | — | 5,83,200 | |
| — | 50.00 | — | — | ||
| "Supply and fixing of LED Driver suitable for PIT/CATWALKLights or DCDC Conveter of 24v 670mA" | — | — | — | 19,950 | |
| — | 100.00 | — | — | ||
| "Removing , Repairing of Existing pit lights against manufacturingdefect" | — | — | — | 10,600 | |
| — | 10.00 | — | — | ||
| Supply and erection of Pre-Cooling box comprising of interlocked switched 63A socket with 63A 4P MCB of IP66 and straight plug complete | — | — | — | 1,78,340 | |
| — | 10.00 | — | — | ||
| Supply and erection of Thermoplastic polycarbonate box | — | — | — | 52,000 | |
| — | 114.00 | — | — | ||
| Supply and erection of 10 W LED Indoor type tube light fitting as per specification enclosed. | — | — | — | 34,200 | |
| — | 310.00 | — | — | ||
| Supply, erection,connecting, testing and commissioning of integrated T8 20W LED (indoor type) tube light fixture complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed. | — | — | — | 1,27,720 | |
| — | 10.00 | — | — | ||
| Supply, erection, connecting,testing and commissioning of 100W LED flood light fixture complete with necessary mounting accessories,clamps and hardware etc as per specification enclosed. | — | — | — | 42,260 | |
| — | 50.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 150 W LED flood light fixture complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed. | — | — | — | 3,63,800 | |
| — | 20.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 200 W LED Flood light fixture complete with necessary mounting accessories, clamps and hardware as per specification enclosed. | — | — | — | 1,85,640 | |
| — | 78.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 40W LED Street light luminarie made up of pressure die cast aluminum housing with high efficiency LED as lighting source and lens with toughened glass having bottom opening separate driver compartment with IP 66 protection suitable to operate with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 1,22,850 | |
| — | 171.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of surface mounted LED 40W luminaire batten type fitting complete with necessary mounting accessories, clamps and hardware etc. as per specification enclosed. | — | — | — | 1,12,176 | |
| — | 320.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of recess 15 W LED Round Down lighters with diffuser and electronic driver complete with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 2,04,160 | |
| — | 130.00 | — | — | ||
| Supply, erection, connecting testing and commissioning of 2'X2', 36/43W LED luminaire complete with necessary mounting accessories, clamps and Hardware etc, as per specification enclosed. | — | — | — | 3,91,170 | |
| — | 70.00 | — | — | ||
| Supply, fixing, connecting and commissioning of Recess circular Round LED down light of 24W Class LED fitting with necessary mounting accessories, clamps and hardware etc as per specification enclosed. | — | — | — | 99,120 | |
| — | 13.00 | — | — | ||
| Supply and fixing, Transportation of 14 SWG Sheet iron Junction Box for 4Core 120/95/70 Sqmm Cable termination with 250A suitable copper busbar capacity JB of size 18''x18"X12" | — | — | — | 1,01,400 | |
| — | 13.00 | — | — | ||
| Supply and Erection of cable Termination Jn.box made-up of thermoplastic suitable for termination of 25 / 35 / 50sq.mm cables with IP 55 / IP 65 protection the suitable clamping arrangements for fixing to pole or wall. | — | — | — | 69,751.5 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing and commissioning of out door type 4way terminal junction box pultruded FRP section/ MS painted as decided by site engineer, 100%maintenance free, rust free, shock proof, weather proff, durable,with 4 terminals mounted on SMC and proper lock arrangements | — | — | — | 13,400 | |
| — | 28.00 | — | — | ||
| Supply & erection of 12 way SPN double door distribution board | — | — | — | 48,356 | |
| — | 48.00 | — | — | ||
| Supply & Erection of 25A DP RCCB with 30mA sensitivity | — | — | — | 1,03,824 | |
| — | 114.00 | — | — | ||
| Supply & Erection of 6/10/16/20/25/32A, C-curve DP MCBs with 10KA breaking capacity | — | — | — | 51,528 | |
| — | 224.00 | — | — | ||
| Supply & Erection of 6/10/16/20/25/32A, C-curve SP MCBs with 10KA breaking capacity | — | — | — | 31,136 | |
| — | 3.00 | — | — | ||
| Supply and errection of 63A 4 pole MCBs with 10 KA breaking capacity | — | — | — | 4,290 | |
| — | 380.00 | — | — | ||
| Supply and erection of 10 A sp modular MCB | — | — | — | 1,23,895.2 | |
| — | 2600.00 | — | — | ||
| Supply & Erection of 6/10A 1-way switch | — | — | — | 1,14,400 | |
| — | 520.00 | — | — | ||
| Supply & Erection of 6/10A multi socket for cell phone pin or 2pin +3 pin with safety shutter | — | — | — | 53,560 | |
| — | 260.00 | — | — | ||
| Supply & Erection of 6&16/20A twin socket heavy duty socket with safety shutter | — | — | — | 26,260 | |
| — | 260.00 | — | — | ||
| Supply & Erection of 16/20A one way modular switch | — | — | — | 45,760 | |
| — | 4.00 | — | — | ||
| Supply and Erection Modular MCB 32A DP 1-way switch with LED indicator, 2 module | — | — | — | 1,752.08 | |
| — | 50.00 | — | — | ||
| Supply & fixing of Modular MCB DP 20/25A capacity similar to GM make as per the directions ofengineer at site(for ac units) | — | — | — | 21,750 | |
| — | 470.00 | — | — | ||
| Supply & Erection of Ceiling rose (3-terminal). | — | — | — | 11,750 | |
| — | 270.00 | — | — | ||
| Supply & Erection of Angle Holder | — | — | — | 7,290 | |
| — | 2.00 | — | — | ||
| Supply, erection, connecting, testing and commissioning of 5.0 HP 43 stage Energy efficient Vertical submersible pump set , Three Phase ,415 Vol, suitable for 100mm dia bore well pump set Delivery size : 32mm, Head 284 Mtr ,LPM @58"44@ RPM :2880 | — | — | — | 1,30,200 | |
| — | 2.00 | — | — | ||
| Supply & fixing of control panel consisting of DOL starter, single phase preventer with power automatic ON & OFF system, with dry run, pilot lamps, selector switch, Voltmeter, Ammeter in suitable sheet steel box of 16 SWG upto 7.5HP pumps including all connected accessories as per the directions of engineer at site. | — | — | — | 31,100 | |
| — | 800.00 | — | — | ||
| Supply, laying, connecting and commissioning of 3 core 4Sq.mm copper flat cable as per the direction of site Engineer. | — | — | — | 1,32,800 | |
| — | 20.00 | — | — | ||
| Supply and fixing of Occupancy Infrared motion sensor 2 module similar to Model no.6772 51 of Legrand make or equavalant Havells/GM/L&T/Havells make with all necessary accessories complete. | — | — | — | 27,940 | |
| — | 4.00 | — | — | ||
| Supply and erection of 32A industrial Plug &socket with 32A MCB 230V 50Hz interlocking surface mounting box IP66 with Din rail complete | — | — | — | 23,080 | |
| — | 4.00 | — | — | ||
| Supply and erection of 63A industrial Plug &socket with 64A MCB 230V 50Hz interlocking surface mounting box IP66 with Din rail complete | — | — | — | 27,524 | |
| — | 1.00 | — | — | ||
| "Supply and erection of Plug and socket DB Thermo plastic poly carbonate , size 800x1055x600 MM , IP 67 , Enclosure and accessories RAL 7035, mounting structure RAL 7016, with System voltage 415 V ,50HZ, 4 Wire +E, Outdoor / Floor mounting ,63A FP 10ka mcb 1 no, 125A (160A) FP 36 ka microprocessor o/l,s/c Mccb 1 no.63A 5 pin ip 67 plug and socket 1 no , 125A 5 pin ip 67 plug and socket 1 no .(shock proof, rust free, corrosion free, Water proof , acid and chemical resistant, fire retardant, self-extinguishing, having high impact against mechanical load, made of halogen and silicon free recyclable materials.Cable gland and cut out will be customer scope, Recommended cable size 1Rx4Cx50SQ mm Cu." | — | — | — | 96,579.46 | |
| — | 16.00 | — | — | ||
| Supply, installation, testing and comissioning of 5 star inverter type 1.5 Ton capacity split type Air conditioning unit complete, conforming to IS: 1391(Part-2)-1992 with amdts No.1 to 4 fitted with rotary compressor suitable for using HCFC refrigerant asper latest for wall mounting as per specification enclosed. | — | — | — | 7,92,096 | |
| — | 72.00 | — | — | ||
| Supply of copper pipe 1/4" & 1/2" of 20 SWG along with 9 mm thickness insulation | — | — | — | 75,816 | |
| — | 72.00 | — | — | ||
| Supply of 1" CPVC Drain pipe with all connected accessories as per site requirement. | — | — | — | 10,440 | |
| — | 160.00 | — | — | ||
| Supply and fixing of ISI 38/40mm width and 12.5mm height PVC pipe/Casing and Caping, with necessary screws including joints bends and all necessary accessories complete. | — | — | — | 10,080 | |
| — | 160.00 | — | — | ||
| Supply and run of 2 nos, 6.0 sqmm, 1100 V PVC (FRLS) insulated flexible copper conductor wires and one run of 2.5 sqmm PVC (FRLS) insulated flexible copper cable for earthing in existing PVC conduit/Casing and capping pipe. | — | — | — | 10,080 | |
| — | 6.00 | — | — | ||
| "Supply & fixing of 12 way Vertical TPN IP 54 distribution board similar to Legrand model No.507753 as per IEC 61439/3 or latest fixed on wall with the following switches 1X160A 25KA4pole Electronic release with inbuilt earth leakage module of adjustable sensitivity maximumoperative voltage 690V compatibility MCCB I/C and 4 x 63 A 10KA 'C' Curve TPMCB out going,4 x 32 A 10KA 'C' Curve TPMCB out going, 4 x 20 A 10KA DP 'C' Curve MCB out going, 4x10A'C' Curve SPMCB out going with all other connected accessories etc. Note: MCCBs: ICs=100%ICu " | — | — | — | 3,52,458 | |
| — | 1.00 | — | — | ||
| Supply, fixing and commissioning of 6 Way TPN DB (incommer + 18 module ) Wall mounted type Double door distribution board confirming to IEC 61439-3 with 250 A Copper Busbar for each phase with 2 neutral bar, 2 earth bar and cable ties with provision of for 160 A FP MCCB as incommer and SP and TP MCB's as outcommer with all connected accessories complete. All the switchgear, Distribution boards shall be of Legrand/ ABB/Schneider /L&T make. | — | — | — | 11,579.26 | |
| — | 1.00 | — | — | ||
| Supply and erection of 160A 4 pole MCCB with 36 KA breaking capacity with Adjustable thermal magnetic release with Extended ROM , spereder links(4 nos-02 sets), phase barriers | — | — | — | 12,179.86 | |
| — | 37.00 | — | — | ||
| Supply and erection of Earthing arrangements | — | — | — | 1,29,426 | |
| — | 38.00 | — | — | ||
| Supply and Erection Provision of RCC earth pit hollow box of size 300 mm x 300 mm x 300mm with 50 mm wall thickness as per Drg by using M20 Grade precast RCC. It includes fixing of earth pits at various locations (All the required men, material and transportation are to be arranged by contractor). Drawing to be collected from Sr.DEE/M/SC office during working hours. | — | — | — | 27,968 | |
| — | 38.00 | — | — | ||
| Supply and Erection of RCC precast slabs with hook to cover Earth pits of dimensions as shown in drawing. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.). Drawing to be collected from Sr.DEE/M/SC office during working hours. | — | — | — | 5,928 | |
| — | 90.00 | — | — | ||
| Supply and erection of GI flat of size 25mmx3mm | — | — | — | 6,030 | |
| — | 2.00 | — | — | ||
| "Design, fabrication, supply, erection, testing, Commissioning of Outdoor LT Cubicle panel board with 14SWG ( with powder coated RAL 7032 ) with suitable Bus bar 400A capacity , Digital MFM ,digital voltmeter, digital ammeter with CTs, indication lamps etc, for housing of following switchgear 1x315A 4P MCCB for I/C-01 No, 2x250A 4 pole MCCB 4x100A 4 pole MCCB ,2x63A MCCBS , complete with accessories, etc.Note: Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-3) (1) All cables terminations to be done along with double compression glands and required lugs. as per the direction of Engineer at site (Qty of panels 1 no)." | — | — | — | 2,26,788 | |
| — | 2.00 | — | — | ||
| "Design, fabrication, supply, erection, testing, Commissioning of Outdoor LT Cubicle panel board with 14SWG ( with powder coated RAL 7032 ) with suitable Bus bar 400A capacity , Digital MFM ,digital voltmeter, digital ammeter with CTs, indication lamps etc, for housing of following switchgear 1x315A 4P MCCB for I/C-01 No, 2x160A 4 pole MCCB 4x100A 4 pole MCCB ,2x63A MCCBS , complete with accessories, etc Note: Before fabrication drawing approval is to be taken from Sr.DEE/M/SC-3) (1) All cables terminations to be done along with double compression glands and required lugs. as per the direction of Engineer at site. (Qty of panels 1 no)." | — | — | — | 2,26,788 | |
| — | 2.00 | — | — | ||
| Supply and erection of 315 A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release with Extended ROM , spereder links(4 nos-02 sets), phase barriers | — | — | — | 61,600 | |
| — | 2.00 | — | — | ||
| Supply and erection of 250A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release with Extended ROH and spreader links (4 nos-02 sets), phase barriers | — | — | — | 59,396 | |
| — | 2.00 | — | — | ||
| Supply and erection of 160A 4 pole MCCB with 36KA breaking capacity with LSIG Micro processor based release with with Extended ROM , spereder links(4 nos-02 sets), phase barriers | — | — | — | 54,618 | |
| — | 8.00 | — | — | ||
| Supply of 100A 4 pole MCCB with 25KAbreaking capacity with Adjustable thermalmagnetic release with Extended ROH and spreader links (4 nos-02 sets), phase barriers | — | — | — | 49,512 | |
| — | 4.00 | — | — | ||
| Supply of 63A 4 pole MCCBs with 16 KAbreaking capacity with Adjustable thermalmagnetic release with Extended ROH and spreader links (4 nos-02 sets), phase barriers | — | — | — | 16,140 | |
| — | 2.00 | — | — | ||
| Digital multi function panel meter complete with CTs with RS485 port | — | — | — | 14,020 | |
| — | 1.00 | — | — | ||
| Supply & Erection, testing and commissioing of Smart Switch Panel is an Electronic Controller housed in a pole mountable enclosure consisting of overload protection, MCB, Power Contactor and Terminal blocks for cable connections. The Electronic Controller switches ON and OFF the Load based on Ambient Light Sensing or Astronomical Clock or Real Time as selected by the user from its Mobile App. The Electronic Controller shall conform to IP 65 and the enclosure shall be non metallic and shall conform to IP 54 and complete accessories | — | — | — | 13,490 | |
| — | 38.00 | — | — | ||
| Supply and erection of following sizes of 5 mtr hot dip galvanised double arm Conicle poles with foundation bolts, base plate, MCB & brackets. | — | — | — | 4,51,022 | |
| — | 1.00 | — | — | ||
| Supply of 0.5 HP Non clogging pump with impeller ,suitable operated on 230Voits,50HZ ,AC, Power Supply ,Head-5mtr LPM -115, pump size 40mm ,Suitable for sump pump | — | — | — | 36,950 | |
| — | 2.00 | — | — | ||
| Supply of 3.0 Hp HP Non clogging pump with impeller ,suitable operated on 230/440Voits,50HZ ,AC, Power Supply ,Head-15mtr LPM -240, pump size 50mm ,Suitable for Spry Water pump | — | — | — | 1,74,800 | |
| — | 3.00 | — | — | ||
| Supply and delivery of pump suction and delivery side suitable size of pipe ,GI, Bends, nipples, couplings, union joints ,nuts & bolts including clamps etc.., | — | — | — | 70,800 | |
| — | 3.00 | — | — | ||
| Supply and erection of 50mm GM non return valves | — | — | — | 25,800 | |
| — | 3.00 | — | — | ||
| Supply and erection of 50mm GM Gate Valve | — | — | — | 22,800 | |
| — | 3.00 | — | — | ||
| Supply and erection off 4" dia pressure gauge | — | — | — | 5,190 | |
| — | 3.00 | — | — | ||
| Labour charges for installation , transporting ,erection and Testing of above pumps | — | — | — | 38,400 | |
| — | 1.00 | — | — | ||
| Supply of PLC asper the IO count mentioned above | — | — | — | 86,600 | |
| — | 1.00 | — | — | ||
| Supply of 7" HMI With touch Screen for user operation | — | — | — | 54,300 | |
| — | 1.00 | — | — | ||
| Supply, fabrication and erection pre-wired control panel Suitable for auto start & stop ,Proction circuses ,wiring , switch Gare, and alarms suitable Housing cabinet required wiring for PLC & HMI | — | — | — | 2,94,000 | |
| — | 1.00 | — | — | ||
| Installation, commissioning of PLC programing and conflagration & HMI Software deployment and conflagrant ,Testing ,Pre-Commissioning of the supplied systems of control panel | — | — | — | 2,65,000 | |
| — | 2.00 | — | — | ||
| Supply and erection of Low Water Level Sensor (LSL) in sump tank and spray tank with 01 extra HD float switch | — | — | — | 33,000 | |
| — | 2.00 | — | — | ||
| Supply and erection of High Water Level Sensor (LSH) float switches for sump tank and spray tank with 01 extra HD float switch | — | — | — | 33,000 | |
| — | 1.00 | — | — | ||
| Supply and erection of Low Water Level Alarm for Spray tank | — | — | — | 9,300 | |
| — | 1.00 | — | — | ||
| Supply and erection of High Water Level Alarm for Spray tank | — | — | — | 9,300 | |
| — | 1.00 | — | — | ||
| Supply and erection of Water Level Maintaining Switch (HOA) to switch off sump pump motor at low water level in Sump Tank & to switch on sump pump motor at high water level in Sump Tank | — | — | — | 6,800 | |
| — | 1.00 | — | — | ||
| Supply and erection of Water Level Maintaining Switch (HOA) to Switch off sump pump motor at low water level in Spray tank | — | — | — | 6,300 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
1_Tender_Booklet_E_M_SC_40_WS_OT_2026_27.pdf Tender Booklet
ATTACHMENT
2_Break_Up_Qunatities_E_M_SC_40_OT_2026_27.pdf Break up quantities
ATTACHMENT
1_Tender_Booklet_E_M_SC_40_WS_OT_2026_27.pdf
ATTACHMENT
2_Break_Up_Qunatities_E_M_SC_40_OT_2026_27.pdf
ATTACHMENT
3_GCC_April-2022_withcorrectionslips.pdf
ATTACHMENT
4_Earthing_RDSO_SPEC.pdf
ATTACHMENT
5_RDSO-SMI_315Rev0.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .