Repair and Restoration to certain steel furniture under GE Nagrota

Amount

1) Removal of existing unserviceable/broken wooden/steel/PVC part from furniture article carefully without disturbing the adjoining parts.Supply and fixing new parts as per given specification and drg after tightening the joints by arc/gas welding making every part in-tact including painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted only after making the entire item intact by tightening the joints. 2).Work will be executed inside Barrack Store yard of GE(Nagrota) and at various sites as per requirement. 3).All steel sections shall be as per standard IS . 4).Plywood/MDF shall be BWR grade-AA /exterior grade of approved make/brand and shall confirm to IS-303. 5).All other material to be incorporate in the work shall be of latest IS standard specification. 6).Anti-termite and anti-bug treatment shall be done before polishing the wooden item. 7).Painting shall only be done with spray machine only. 8) Painting will only be caried out after removing/peeling the existing paint by using paint remover.

ALMIRAH LARGE STEEL,FD-67(M)/ 1031 Removing UNSV door shutter carefully by unriveting the hinges,S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah large steel;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from almirah steel large ,S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots,S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding . Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Material and labour for painting each almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete almirah.The painting to each article shall only be carried out by spray machine only.

ALMIRAH LARGE STEEL,FD/E6/MAP/18 Removing UNSV door shutter carefully by unriveting the hinges,S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah large steel;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from the almirah steel large ,S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV lock from internal safe of almirah large steel;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding . Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Material and labour for painting each almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete almirah.The painting to each article shall only be carried out by spray machine only.

ALMIRAH STEEL MEDIUM WITH SHELVES,FD-67(M)/1032 Removing UNSV door shutter carefully by unriveting the hinges,S&F new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge. Complete all as directed and shown on drawing.

Removing UNSV lock from shutters of almirah large steel;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from the almirah steel large ,S&F new 130mm long chromium plated handle to steel shutters ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots,S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Spot gas welding

Material and labour for painting each almirah by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete almirah.The painting to each article shall only be carried out by spray machine only.

TABLE OFFICE OFFICER STEEL,FD-1003 Removing UNSV top ;S&F new top of size 1680mmx870mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around duly fixed with adhesive and headless nails . Complete all as directed and shown on drawing.

Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cms

Material and labour for painting each table office officer steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table.The painting to each article shall only be carried out by spray machine only.

TABLE OFFICE CLERK STEEL,FD-84(M)/1004 Removing UNSV top carefully;S&F new top of size 1200mmx610mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table ,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cm

Material and labour for painting each table office clerk steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table.The painting to each article shall only be carried out by spray machine only.

TABLE STEEL 900X900X760MM,FD-1009 Removing UNSV top from table steel carefully;S&F new top of size 900mmx900mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Removing UNSV top rail from the table carefully by cutting the welded ends with hand held machine and supply and fix new rail made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Supply and fix new PVC shoe suitable to leg after removing UNSV shoe complete all as specified, as directed and as shown on drawing.

Material and labour for painting each table steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table.The painting to each article shall only be carried out by spray machine only.

LOCKER STEEL,FD-257/1029 Removing UNSV/damaged door shutter carefully by removing the hinges and S&F new shutter made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots and S&F new shlef made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing the existing unserviceable rusted conduit pipe from the side flanges ,S&F new 20mm dia conduit pipe along with side flanges. Complete all as directed and shown on drawing.

Removing UNSV handle from the lockers steel and S&F new 100mm long chromium plated steel handle of ISI marked with riveting to steel shutters ,Complete all as directed and shown on drawing.

Removing the existing unserviceable hasp and staple from locker steel and S&F new hasp and staple of size 75mmx40mm of 3mm thickness with riveting to steel shutters. Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of lockers carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Continous gas welding to all broken joints of table in length of 1 cm

Material and labour for painting each locker steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete locker.The painting to each article shall only be carried out by spray machine only.

RACK SHOE STEEL,FD/E6/MAP/02(R) Removing the existing damaged/rusted legs (U shaped) carefully without damaging the other parts by using hand held cutting machine,S&F new legs (U shaped) made out 25mm dia MS pipe 18 gauge duly welded to its position.Complete all as directed and shown on drawing.

Removing UNSV wire mesh (Jali) shelves, S&F new wire mesh (Jali) shelves made out of 3mm dia MS rods duly welded to its position.Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Continous gas welding to all broken joints of table in length of 1 cm

Material and labour for painting shoe rack steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete shoe rack.The painting to each article shall only be carried out by spray machine only.

TEAPOY VERANDAH,FD-35/255 Removing UNSV top from teapoy verandah carefully;S&F new top of size 900mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

S&F long stiffener of length 750mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the short siffeners at bottom of teapoy,irrespective of what is shown in drg

S&F short stiffener of length 350mm of conduit pipe of 20mm dia of wall thickness 1.6mm welded in between the legs of teapoy,irrespective of what is shown in drg

Material and labour for preparation of the old painted steel surfaces by scraping with emery paper and applying one coat of synthetic enamel paint of white colour of approved quality complete all as specified, as directed and as shown on drawing.

TEAPOY VERANDAH,FD-35/255 Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,pVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker and complete seat and back shall be covered with transparent polythene wrap. Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed

Removing unserviceable 5 spokes stainless steel adjustable pedestal assembly, S&F new 5 spokes stainless steel adjustable pedestal assembly to chair computer all as specified and directed by Engr -in charge.

Removing unserviceable hydraulic gas lift cylinder of chair ,S&F new hydraulic gas lift cylinder to chair.Complete all as directed and shown on drawing.

Painting to all steel portion of chair computer with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.

CHAIR WRITING ,FD/E6/MAP/12 Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,pVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

Removing old unserviceable arm rest of chair and S&F new arm of same shape and size ,made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Painting to all steel portion of chair writing with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.

TEAPOY VERANDAH,FD/E6/MAP/17 Removing UNSV top from teapoy carefully;S&F new top of size 750mmx450mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing old UNSV shoes,Supply and fix new PVC shoe suitable to each leg .complete all as directed and as shown on drawing.

Material and labour for painting each teapoy by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete almirah.The painting to each article shall only be carried out by spray machine only.

Chair conference Regency mid back Godrej PCH-7002D Removing the existing torn out tapestry cloth ,pressed foam cushion,elastic webbing tape,pVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully.S&F new seat and back made by using 60mm thick 40 density foam sheets,new webbing tape,new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.The seat and back shall also be covered with plastic transparent film.Complete all as specified and as directed.

Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping.S&F new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape ,the rate of cloth shall not be less than 350 per mtr.The fixing of cloth shall be done by using heavy duty gun tacker.Complete all as specified and as directed.

Painting to all steel portion of chair with desklet with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.Complete all as directed and shown on drawing.

TABLE 3'X2' WITH DRAWER STEEL FD-1008 Removing UNSV top from table steel carefully;S&F new top of size 900mmx600mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Removing the existing unservicable /rusted drawer ; S&F new drawer made of 1mm MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front.. Complete all as directed and shown on drawing.

Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cms

Material and labour for painting each table steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table.The painting to each article shall only be carried out by spray machine only.

TABLE 3'X2' WITHOUT DRAWER STEEL FD-1009 Removing UNSV top from table steel carefully;S&F new top of size 900mmx600mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

Removing UNSV leg from the table steel carefully by cutting the welded ends with hand held machine and S&F new leg made of MS Square tube 25mmx25mm of wall thickness 1.6mm by welding to the exact place and position,The welded surface shall also be grinded to make the spots and surface smooth.

Removing UNSV lock from drawers and shutters ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing the old broken PVC shoes from the legs of table,S&F new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom.

Continous gas welding to all broken joints of table in length of 1 cms

Material and labour for painting each table steel by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table.The painting to each article shall only be carried out by spray machine only.

BOOK CASE STEEL GLAZED ,FD-1028 Removing UNSV lock from shutters of book case steel ;S&F new 6 lever lock with duplicate keys. Complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link

Removing UNSV handle from book case steel ,S&F new 130mm long chromium plated handle to each openable shutter ,Complete all as directed and shown on drawing

Removing UNSV/damaged shelf carefully by removing the rivets and welding spots,S&F new shelf made of 1 mm thick MS sheet of same size and shape. Complete all as directed and shown on drawing.

Removing UNSV/damaged bottom portion carefully by removing rivets and welding spots and S&F new bottom made of 1 mm thick MS sheet of same size and shape by welding . Complete all as directed and shown on drawing.

Removing UNSV leg from bottom of book case steel carefully by unriveting and using hand held cutting machine without damaging the other parts.S&F new leg made of 1mm thick MS sheet to the existing place through welding and riveting.Complete all as directed and shown on drawing.

Material and labour for painting by peeling out the old paint by applying paint remover solution,filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth.Two coats of hammer tone paint as per existing shade shall be applied externally and internally to complete table.The painting to each article shall only be carried out by spray machine only.

Table Dining for OR's FD-165(M) Removing UNSV top from table dining OR's steel carefully;S&F new top of size 1900x685mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing half round teak wood edging all around fixed with adhesive and headless nails. Complete all as directed and shown on drawing.

CHARPOY GI PIPE WITH PLY TOP,FD-220/220(R):- Taking out existing unserviceable /broken plywood from the charpoy GI pipe by unscrewing nut,bolt ,washer and flat iron. Tightening each part of the entire frame of charpoy by using pipe wrench and Supply and fixing new 12mm thick plywood BWR grade-AA made of wood and other lignocellulosic products conforming to IS-303 of size 1980mm x 900mm fixed over the GI pipe frame and fixing 3 components(i.e- ply ,flat iron and rail )with new GI nylon insert nut, bolt and washers 8mm dia 62 to 65mm long as directed by Engr-in Charge and all as specified.

PACHNANDA BUILDERS

M/S RAJINDER GOODS TRANSPORT CARRIER

M/S Shri Balaji Enterprises

Bidder Name

M/S Shri Balaji Enterprises

PACHNANDA BUILDERS

VEE KAY IND

M/S RAJINDER GOODS TRANSPORT CARRIER