REPAIR TO ROOF, MANGALORE TILES, CEILINGS, JOINERY, FLOOR WALL TILING, PLUMBING ETC AT ASMT, ASC CENTRE AND COLLEGE, AT COY, 49 MVH UNDER AGE BR I OF GE CENTRAL BANGALORE

Amount

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing debris outside MD land complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level) and removing debris outside MD land complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc and removing debris outside MD land complete all as specified and directed.

Taking down chowkats or frame, not exceeding 1.5 Sqm in each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exceeding 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters, not exceeding 1.0 sqm in each and refixing shutter in the same opening including easing & adjusting complete all as specified and directed.

Taking down shutters, exceeding 1.0 sqm but n.exc. 2 Sqm in each and refixing shutter in the same opening including easing & adjusting complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposing serviceable tiles to MES store and the rubbish/debrises out side MD land complete all as specified and directed.

S & F well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints including treating the timber libarally brushed at least twice with oil or kerosene based solusion of chlorophyrifos 20EC 1.0 % (by weight) concentration complete all as specified and as directed.

M&L for 35 mm thick 2nd class hard wood factory made glazed/gauzed skeleton shutters for door, open rebated and prepared to receive glass, gauze etc (without sash bars), edges framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc; size of the members of shutters as specified in SSR Part- I, Section 8, clause 8.24(a) complete all as directed.

S & F 30 mm thick, second class hardwood glazed and skeleton shutters factory made as in windows/ventilators open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded complete all as specified and directed in SSR Part I Section 8 clause 8.24 (b).

S&F 35mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack all as specified.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed

S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

S & F 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 100 mm size, butt hinges, stainless steel with cadmium coated screws complete all as specified and directed.

S & F 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F 100 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F in repair 150 mm long, Aluminium, barrel tower bolts of extruded section of aluminium alloy, anodised finish not be less than Grade AC 10 of IS 1868:1996 with transparent anodic film complete all as specified and directed.

S & F 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F 100 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F in repair 150 mm size, Aluminium handles, cast type, anodised to a bright natural, mat finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F in repair aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm anodised finish not be less than Grade AC 10 of IS 1868:1996 complete all as specified and directed.

S & F 100mm aluminium anodised, hasp and staple, safty type, with hinge pin, including bolt to hinge plate and fixed with screws complete all as directed.

S & F in repairs, 300 mm long, mild steel, arrow pattern springs incuding roller and roller plate complete all as specifed and directed.

S&F in repair aluminium anodised body and tounge door stopper with hard drawn steel spring, 100mm size fixed to door all as directed.

S & F in repair aluminium (extruded section body) door closer hydraulically regulated, designated No 3 universal aluminium (extruded section) body, suitable for aluminium door shutters of 851 to 1000mm width and of weighing 61 to 80 KG.

S & F aluminium Anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-board (plain), HSPC fixed to frame including providing two coats of white wash complete all as specified and directed by the Engr-in-Charge. Make :- Eternit Everest / lafarge/ Armstrong or equivalent as approved by GE

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in base of flooring, etc and finished the surface fair to receive top layer screed bed complete all as specified and directed.

M & L for 40 mm thick, plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floors laid in panels, finishing the surfaces even & smooth with using extra cement complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection laid in proper slope/gradient etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

S & F 3 mm thick, 38mm wide glass dividing strips and inserted in position to conform to design as required complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles, Grade B II(a), 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles , Grade B II(a), 8 to 10mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for ceramic, coloured tiles 7 to 8 mm thick as in skirting/ dado/ vertical surfaces to match the length of floor tile procured under No 41 above including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed ceramic, coloured tiles, Grade B III, 7 to 8 mm thick area of each tiles not less than 0.06 sqm as in skirting/ dado/ vertical surfaces including 10 mm thick screed bed in cement mortar 1:3 set & jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Vitrified ceramic, designed, coloured tiles, Grade B I(b), 10 mm thick, (square/rectangular) polished, area of each tiles exc 0.36 sqm but not exc 0.42 sqm, in floors, etc including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

All as per item No 44 above/herein-before but in vertical surfaces including skirting, dados and risers to steps etc to match the length of floor tiles including 10 mm thick screed bed in cement mortar 1:3 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

S & F Mild steel small articles using flat iron such as band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290, Gde E-165 including treating with tar or coat tar black paint complete all as specified and as directed.

M&L for precast cement concrete block masonry type C1, 1:3:6 (20 mm graded granite stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in two layer (10mm + 5mm thick) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with water proofing compound at top 5mm thick layer by weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

"Supply only" integral water proofing compound (ISI marked) complete all as specified and directed. (Make : Dr FIXIT/Fosroc/choksey)

M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparing old plastered surfaces of walls and applying one coat of distemper-oil-emulsion complete all as specified and directed.

M & L for Preparation of old surfaces walls and applying one coat of white wash complete as specified and directed.

M & L for Preparation of old surfaces ceilings and applying one coat of white wash complete as specified and directed.

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in padding over roof/ chajja etc and finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L for removing existing water proofing treatment along with PVC sheets disposing out of MD land/premises and rendering 10mm thick in CM 1:4 & Applying oil bound bitumen primer @ 0.40 Kg/Sqm and providing 3 mm thick APP membrane weighing not less than 3.6 kg/sqm reinforced with non woven polyester matt weighing not less than 180 gm /sqm having softening point not less than 140 centigrade, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg /Sqm on top of membrane surface and then finished with solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm complete all as specified and as directed.

Taking up or down 15mm bore, Steel tubing and connections.

Taking up or down 20mm bore, Steel tubing and connections.

S & F in repair 20mm ball valve high pressure of PYMT with epoxy coated aluminium rod and high density plastic float/ball screwed for iron pipe complete all as directed.

S&F rotational moulded polyethylene water storage tanks 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple suitable for HDPE water tank, 20mm bore gun metal gate/globe valve with iron wheel head including taking down old unserviceable water tank of same capacity complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple suitable for HDPE water tank, 20mm bore gun metal gate/globe valve with iron wheel head including taking down old unserviceable water tank of same capacity complete all as specified and directed.

Cleaning and removing all scales and dirts etc from tanks and from mouth of circulating pipes etc exceeding 500 litre not exc1000 litres.

M&L for Disconnecting existing PVC tanks of any position or at any hight of any description,capacity exc 500 ltr but not ecx 1000 ltr, setting aside for cleaning (lowering if required) for repair, cleaning and removing all scale and dirt/dust from existing PVC tank and hoisting, reconnecting and refixing in position including inlet-outlet pipe at opening portion and at mouth etc complete all as specified and directed

M&L for Disconnecting existing PVC tanks of any position or at any hight of any description,capacity exc 1000 ltr but not exc 2000 ltr, setting aside for cleaning (lowering if required) for repair, cleaning and removing all scale and dirt/dust from existing PVC tank and hoisting, reconnecting and refixing in position including inlet-outlet pipe at opening portion and at mouth etc complete all as specified and directed

Supplying and laying of 20mm dia CPVC pipes (ISI marked) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors/trenches complete all as specified.

Supplying and laying of 25mm dia CPVC pipes (ISI marked) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors/trenches complete all as specified.

Supplying and laying in repair 15mm dia gun metal gate valve with iron wheel head screwed both ends for iron pipe complete all as specified.

S&F in Repair Vitreous China Wash hand basin , white flat back size 550x400 mm including a pair of mild steel angle iron brackets duly painted, erected/embeded in wall, providing Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & 32 mm dia LDPE PVC waste pipe, PVC connection 15 mm size 600 mm long including cutting hole and pinning in ends making good disturbed portion using cement mortar 1:3 complete all as specified & directed by Engineer-in-charge.

S & F in repair Vitreous China urinal, bowl type, flat back, size 465X355X265mm (Appx size), white with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed. (Make: Parryware /Hindware/Cera)

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with white PVC seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S&F in Repair Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest S or P trap etc. including 10 ltr capacity low level PVC Flushing cistern, PVC connection pipe, 15 mm dia, 600 mm long and 32mm dia flush pipe, S or P Trap & Provision of concrete bedding and making good to floor all as specified & directed by Engineer-in-charge.

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe 32mm dia, float and handle including PVC connection pipe of 15mm dia, 600mm long, brackets complete all as specified and directed.

S & F in repairs health faucet cast copper alloy with push button & 1 metre long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed. Make CERA Cat No F 8030103 or equvelent of Make : Hindware/Parryware/Prayag

S&F in repair 15 mm bore bib taps cast copper alloy chromium plated with capstan head screwed down to iron pipe, fancy type concealed type complete all as specified and directed

S&F in repair 15 mm bore concussive push button taps cast copper alloy chromium plated screwed down to iron pipe, complete all as specified and directed

S&F in repair 15 mm bore stop valves/angle valve cast copper alloy chromium plated fancy type with long shank and cup, concealed type, screwed down to iron pipe complete all as specified and directed

S & F in repairs PVC 32mm dia waste pipe for basin, sink, and urinals etc with long screwed shank and fly nuts, flange end all as directed.

S & F in repairs PVC 40mm dia waste pipe for basin, sink, and urinals etc with long screwed shank and fly nuts, flange end all as directed.

S&F in repair 15 mm bore, any colour, PTMT, bib taps high pressure with capstan head screwed down to iron pipe complete all as specified and directed (Minimum weigh 90 gms). Make: PRAYAG Cat No 121 or equivelent of POLYTUFF

S&F in repair 15 mm bore, any colour, PTMT, stop valve high pressure with capstan head screwed down to iron pipe complete all as specified and directed (Minimum weigh 90 gms). Make: PRAYAG Cat No 121 or equivelent of POLYTUFF

S&F in repair 15 mm bore, any colour, PTMT, pillar taps high pressure with capstan head screwed down to iron pipe complete all as specified and directed (Minimum weigh 110 gms). Make: PRAYAG Cat No 121 or equvelent

S & F in repairs PVC water tank cover for any size/capacity tank. Make : Sintex/Polycon/Rotex

S & F in repairs brass chromium plated shower rose and arm with or without swivel joints, 100mm size including fixing to iron pipe complete all as specified and directed. Make : CERA Cat No F 7020304 or equvelent of Make Hindware/Parryware/Prayag

S & F in repairs brass chromium plated tubular towel rail, 20mm dia 'D' type, 600mm long between flanges complete all as specified and directed.

S & F in repairs brass, chromium plated centre hole, 15mm bore basin mixer with long bend for mixing hot and cold water, screwed down, screwed for iron pipe and fixed complete all as specified and directed. Make: CERA Cat NO F2008461 8475 or equvelent of Make Hindware/Parryware/PRAYAG

S&F in repair PVC bathroom cabinet best quality fixed to wall using brass screws complete all as directed.

S & F in repairs PVC connection pipe with PTMT nuts, 600mm long. Make: CERA/Hindware/Parryware/PRAYAG

S & F in repairs PVC connection pipe with PTMT nuts, 450mm long. Make: CERA/Hindware/Parryware/PRAYAG

S&F in repair PTMT gratings, circular type, 125mm dia with waste hole fixed with white cement complete all as directed.

S & F in repairs, PVC, water closet seat and cover, white/black closed pattern with recessed bottom, mild steel chromium plated or aluminium anodised hinging device complete all as specified and directed.

S & F 110 mm/110mm bore, UPVC trap 'P' or 'S' type, fixed in position complete all as specified and directed.

Cutting into existing manholes for inserting new drain pipe, 110mm bore and making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B1 finished to match with existing complete all as directed.

S & F 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with cement joints fixed to wall using MS holder bat, etc complete all as specified and directed.

S & F 75 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length without ears, with cement joints fixed to wall, using MS holder bat etc complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius with acess door complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius with acess door complete all as specified and directed.

S & F in repair 75 mm dia outlet , PVC (SWR) floor trap, with grating including jointing to waste pipe with solvent cement, fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F in repair 75 mm dia outlet , PVC (SWR) multi floor trap, with grating including jointing to waste pipe with solvent cement, fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F in repair 125/110mm, PVC (SWR) gully trap, with grating including jointing to waste pipe with solvent cement, fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F PVC (SWR) branch piece single,(single Y) 110 mm dia equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) branch piece single,(single Y) 75 mm dia equal or unequal with access door complete all as specified and directed.

Dismantling Asbestos Cement Corrugated or Semicorrugated in Roof covering .

M&L 6mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with L type or J type cranked hook bolts

All as per item No 108 above but except sheet, fixed using new L type or J type crank hook bolts. Note : Old serviceable sheet retrieved under item No 107 shall be used.

S & F asbestos cement two piece serated ridge for corrugated sheets fixed with 'L' or 'J' type or cranked nut & bolts as in repairs complete all as specified.

S&F for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (Total coated thickness) of any colour having tensile strength of 550 Mpa finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) as in roof covering /cladding to wall, fixed with best quality self tapping screws as specified

Dismantling single layer mangalore pattern or similar tiles in roofing

M &L for roof tiles, mangalore pattern interlocking at side joints laid dry

All as per item No 113 above but except roof tiles. Note : Old serviceable roof tiles retrieved under item No 112 shall be used.

Sangam Construction

Omkar Constructions