REPR TO EM INSTLTN CIGI PUMPG GRVATY DISTRBN PIPLNE ATENDNG BRAKDOWNS DAYTODAY CMPLT MAINT OF VALVE NRV OF WS DSTRBUTN TUBWEL PUMPSET STRTR PANL CONTRL PANEL CONECTG CABLNG DSINFCTAN SYST CLENG OF OHT AT OTG BHADORIYA AND DANGU MIL COM UNDER GE S PTK

Amount

M&L for rectification of existing defective run lead joints including burning and removing the old defective lead joints and providing new lead joints with all required materials and testing the joints for leakages for 80 mm dia sizes of CI/DI pipes complete all as directed(Note:Earth work shall be measured separately)

All as per item No.1 above but 100 mm dia

All as per item No.1 above but 150 mm dia

All as per item No.1 above but 200 mm dia

Supply and replace sluice valve spindle made out of EN-8 steel with check nut made out of brass/bronze material including replacing perished gland packing, rubber gasket, bolts and nuts suitable for 80 mm dia sluice valve sizes of sluice valves all as directed :-

All as per item No.5 above but 100 mm dia sluice valve

All as per item No.5 above but 150 mm dia sluice valve

All as per item No.5 above but 200 mm dia sluice valve

S&F in replacement for Cl sluice valve, non-rising type conforming to IS-14846, sutiable for 200 mm bore pipe consisting of SS spindle as per IS 6603, Cast iron Body, Dome & Wedge as per IS 210, greasy jute type gland packing, fasteners as per IS 1367, Natural rubber gasket, CI manual hand wheel etc complete double end flanged and drilled, of Class PN-1.6 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc complete all as specified and directed.

All as per item No.9 above but 150 mm dia

All as per item No.9 above but 100 mm dia

All as per item No.9 above but 80 mm dia

M & L for CI pipe special of class 'A' and 'B' like tee's bend sockets, collar's of jointing coupling etc of any type(flanged or socket/spigot type )all as specified or new position with the help of connecting pieces for sizes upto 200 mm dia CI pipe line all as directed

M/L for replacing unserviceable 200 mm dia cast iron pipe with spigot & socketed ends centrifugally cast class LA 150 mm bore ISI marked suitable for lead joint in any length laid in trenches complete all as specified and directed by Engr-in-Charge. (ExcavationC & lead joints shall be measured and paid separately).

All as per item No.14 above but 150 mm dia

All as per item No.14 above but 100 mm dia

All as per item No.14 above but 80 mm dia

S&F in replacement for Cl sluice valve, non-rising type conforming to IS-14846, sutiable for 200 mm bore pipe consisting of SS spindle as per IS 6603, Cast iron Body, Dome & Wedge as per IS 210, greasy jute type gland packing, fasteners as per IS 1367, Natural rubber gasket, CI manual hand wheel etc complete double end flanged and drilled, of Class PN-1.0 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc complete all as specified and directed.

All as per item No.18 above but 150 mm dia but PN 1.0

All as per item No.18 above but 100 mm dia but PN 1.0

All as per item No.18 above but 80 mm dia but PN 1.0

Supply, Fixing, Testing connecting air release valve of size 80 mm dia with 2 air outlet Kinetic design with isolating valve as per IS 14845 including dismantling of unserviceable Air release valve on 150 to 200 mm dia CI/DI pipeline all as specified and as directed.

S&F in repair Cl swing check NRV conforming to IS-5312, sutiable for 100 mm bore pipe consisting Cast iron Body, door as per IS 210, Bronze body ring as per IS 318, natural rubber door face, hinge pin SS ASTM A276 type 410, fasteners as per IS 1367, Natural rubber gasket, etc complete double end flanged and drilled, of Class PN-1.6 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc complete all as specified and directed.

S&F in repair Cl swing check NRV conforming to IS-5312, sutiable for 150 mm bore pipe consisting Cast iron Body, door as per IS 210, Bronze body ring as per IS 318, natural rubber door face, hinge pin SS ASTM A276 type 410, fasteners as per IS 1367, Natural rubber gasket, etc complete double end flanged and drilled, of Class PN-1.6 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc complete all as specified and directed.

M&L for fixing in repair Y type Dirt box (strainer) made out of CI with necessary washout arrangement complete including necessary additions & alterations to pipe incl cutting, gaskets & GI nut bolts & washers etc complete of 200 mm dia pipe sizes Note:- CI/MS pipe/ Specials if required will be measured & paid separately.

All as per item No.25 above but 150 mm dia pipe

S&F 20 mm dia gun metal gate valve with iron wheel head screwed both ends for iron pipe of size including dismantling old one.

All as per item No.27 above but 25 mm dia

All as per item No.27 above but 40 mm dia

All as per item No.27 above but 50 mm dia

All as per item No.27 above but 80 mm dia

S&F in repair 20 mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches/ on floor/ walls etc complete all as directed including dismantling old defective pipe lines. Note: The rate quoted deemed to be inclusive of all fittings necessary for fixing the pipe to GI pipes wherever required.

All as per item No.32 above but 25 mm dia

All as per item No.32 above but 40 mm dia

All as per item No.32 above but 50 mm dia

Taking up and down old/unservicable 15 mm dia bore GI tubing with fittings complete all as specified and directed. (Earth work will be measured and paid under respective items of sch 'A').

All as per item No.36 above but 20 mm dia

All as per item No.36 above but 25 mm dia

All as per item No.36 above but 40 mm dia

All as per item No.36 above but 50 mm dia

All as per item No.36 above but 80 mm dia

Supply and lay 15 mm dia pipe in trenches / on roof / on wall / steel water tubing galvanised medium grade with all fittings of sizes incl dismantling old one

All as per item No.42 above but 20 mm dia

All as per item No.42 above but 25 mm dia

All as per item No.42 above but 40 mm dia

All as per item No.42 above but 50 mm dia

All as per item No.42 above but 80 mm dia

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying pipes or foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n.exc 10sqm on plan and n.exc 1.5m in depth and getting out in any type of soil.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm in any type of soil.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M/L for carrying out physical, chemical & Bacteriological analysis all as per IS 10500:2012 for Drinking water sample of the Fresh water Pump Houses at various locations from approved laboratory .Note : The rate quoted deemed to inclusive of collecting water sample in Sterilised bottle/PVC container & submitting the same for testing.

M&L for attending break down of pipe line bursting/cracks including excavation in hard / dense soil with the use of Earthmoving machinery / labour and taking out old CI /GI/MS defective / misaligned water pipe line of size 200/150/100/80 mm dia bore carefully after discon-nection of joints to a length up to 8 mtr and create bund with excavated earth and dewatering / bailing out water complete with diesel engine driven pump set and positioning the pipe line after repairs, returning filling and removal of surplus soil / excavated material with the help of excavator / proclainer all as directed. NOTE : (a) M/L for Lead Joints/ spares / CI /GI specials will be measured and paid separately. (b) M/L for CI / GI/MS pipe, Specials, lead joints etc will be measured and paid separately under relevant Schedule Items. (c) The rate is deemed to include Cost for tool and plant and transportation required for attending the repair work. (d) Disconnecting / dismantling/ cutting the existingpipe line is included in the quoted rate . (e) The rate is inclusive of earth work complete including returning & refilling in any type of strata complete. (f) The breakdown shall be attended within 4 Hrs of intimation round the clock and time of restoration shall be maximum of 8 Hours. The additional manpower required to complete the job in quoted rate is deemed to be included in the quoted.

Repair to GI pipe lines of size 15 to 25 mm bore dia and repair to leaked joints of pipe line complete including replacement of GI fitting i.e union,nipple & sockets if required including excvation and taking up & down required cutting & threading refixing in position in trenches & all as directed.

All as per item No.53 above but size 40 to 50 MM bore.

Dismantling of old U/S valve pit of size 120x120x90 Cm ( internal dimensions of the chamber) including and removing the debris at a distance not exceeding 50 Mtr and M/L for brick massonary with cement mortar with 1: 6 , 23 cm and flush pointing externaly work proceeds in the same mortar complete ( using 30% old bricks & 70% New bricks) complete with the following specifications and as directed by Engr-in-Charge. Note :-(i) 10mm thick plaster internally in CM 1:6.(ii) Flooring 40mm thick in PCC 1:2:4 type B-1 over 75mm thick hard core of guage not exc 63mm thick. (iii) Angle iron frame 40X40X6mm thick for cover and mild steel 3mm thick cover with locking arrangement,handle and necessary hinges etc, (iv) PCC 1:3:6 type C-2 100mm thick in foundation .(v) Two coat of synthetic enamelled paint to cover internally and externally over a paint of Red Oxide primer.

All as per item No.55 above but of size 100x100x105 cm

All as per item No.55 above but of size 90x90x105cm

All as per item No.55 above but of size 60x60x60 cm

S&F in repair Rubber gasket joint suitable for 200 mm bore cast iron/DI pipes all as specified and directed.

S&F in repair Rubber gasket joint suitable for 150 mm bore cast iron/DI pipes all as specified and directed.

S&F in repair Rubber gasket joint suitable for 80 mm bore cast iron/DI pipes all as specified and directed.

M&L for PCC 1:4:8 type -D2 using 40mm graded aggregate in fdn filling and mass complete for pipe line supports or any indicated position all as specified and directed.

Supply, fixing and laying ductile iron pipe, socket & spigot with bulb type rubber tyton gasket and jointing material as per standard complete of class K-7 of 200 mm dia sizes complete in trenches/ on pedestals etc complete mortar lining (CML) and outside black bitumen coating etc, complete all as specifide and directed. Note: ( Earth work includes excavation, returning & filling and removal, DI fittings will be measured and paid separate where required).

All as per Srl item No 63 above but for 150 mm dia

All as per Srl item No 63 above but for 100 mm dia

Supply, fixing and laying ductile iron pipe flanged pipe with rubber gasket and jointing material as per standard complete of class K-7 of 200 mm dia sizes complete in trenches/ on pedestals etc complete mortar lining (CML) and outside black bitumen coating etc complete all as directed. Note: ( Earth work includes excavation, returning & filling and removal, DI fittings will be measured and paid separate where required)

All as per Srl item No 66 above but for 150 mm dia

All as per Srl item No 66 above but for 100 mm dia

Disconnecting the delivery line and providing dummy plate with nut, bolts to avoid water leakages and M&L for taking out vertical turbine pump /submersible pumpset of any make of capacity 20 HP to 50 HP from the tubewell/borewell carefully complete with column pipe for inspecting the condition of column pipe, pumpset & flat submersible cable etc complete all per site requirement complete all as specified and directed. Note:(i) The cost inclusive of necessary T&P of removing vertical turbine/submersible pumpset carefully without any damages to pump, motor, shaft, column pipe and casing. Any damages shall be beared by the Contractor at his own cost. (ii) The rate inclusive of dismanlting of motor of Vertical turbine pump set.(iii) The M/L for repairs to pumpsets/ column pipe/cable if required & measured and paid separately under relevant Schedule.

Lowering vertical turbine pump /submersible pumpset of any make of capacity 20 HP to 50 HP inside the tubewell/borewell carefully complete with column pipe and other connected parts and including replacement of nut ,bolts, washers, gasket of suitable size all per site requirement and rec-connection with delivery line with nut ,bolts, washers, gasket of suitable size all as specified and directed. Note:(i) The cost inclusive of necessary T&P of lowering vertical turbine/submersible pumpset carefully without any damages to pump, motor, shaft, column pipe and casing. Any damages shall be beared by the Contractor at his own cost. (ii) The rate inclusive of re-connection of motor of Vertical turbine pump set.

Strip opening of 3 phase AC submersible motor, taking out burnt winding coil complete and re-winding with PVC insulated super quality water proof winding wire including PVC seal (water proof compound) and thrust bearing as per requirement of existing size and make, re-assembling the motor and testing complete of capacity 20 to 50 HP motor.

Taking out worn out bearing/ bush sleeves from the submersible motor of capacity 30 to 50 HP and providing new stainless steel, turning and polishing of bushes complete including checking of allingment complete in all respect all as specified and directed.

S & F in replacement of thrust bearing plate along with disc of motor of capacity 20 HP to 50 HP

S & F in replacement of oil seal of motor of capacity 20 HP to 50 HP.

Dismantling the submersible pumping set bowl assembly/ motor of any make for carrying out repair and replacement of worn out parts by strip opening with all parts such as bowl casing, impellers, pump shaft, bushes neck ring etc.and machine work such as welding, turing, re-facing where required and replacing of parts of pump of 4 to 9 stages, size 150mm, of capacity 20 HP to 50 HP capacity. Note: - Spares parts and their fixing shall be paid separately under the respective item of schedule 'A'

S & F in replacement of pump shaft of stainless steel suitable for submersible pump set up to 9 stages including threading, cutting to required size all as specified and directed.

S & F in replacement of gun metal/Stainless Steel impellers of suitable size for bowl assembly of submersible pumping set as per site requirement for suction, discharge and intermediate bowls complete all as specified and directed.

S & F in replacement of cast iron casing suction/discharge/ intermediate with studs.

S & F in replacement of shaft seal of rubber all as specified.

S & F in replacement neck ring of bowls suction/discharge/ intermediate

S & F in treplacement of gun metal bush of bowls all as specified

S & F in replacement of rubber bushes of bowls assembly of suitable, make and model as per existing for suction and discharge bowls.

S & F in replacemnt of shaft coupling with key stainless steel of suitable sizes, type, make and model as per existing all as specified and directed.

S & F in replacemnt of stainless steel middle/distance bush of suitable size all as required at site and directed.

S & F in replacemnt of stainless steel impeller key all as specified and directed.

S & F in replacement of studs with nuts all as directed.

Supply and fixing of mild steel column pipe coupling 100 mm dia, heavy duty 3.0 Mtr long threaded or flanged all as specified and directed.

Supply and fixing line shaft bearing retainer of gun metal with rubber bushes for column pipe 150 mm dia all as specified and directed.

Cutting and removing worn out threaded portion of mild steel column pipe heavy duty and re threading the same up to specified length to match with socket of size 150 mm dia.

Cutting and removing worn out threaded portion mild steel/stainless steel line shaft of any dia, length and rethreading the same up to specified length to match with existing coupling all as specified and directed.

S & F new bolts,nuts and washers in places of existing worn out/unserviceable bowl bolts.

S & F Mild steel column pipe for submersible pump set, 125 mm dia, 5 mm thick and 3 mtr. Long duly screwed/ welded flanged on both sides with bolts & nuts to mild steel flange including rubber joints all as specified and directed.

Supply and fixing submersible cable 16 Sqmm copper 3 core all as specified and directed by Engr-in-charge.

Suppply only chlorination treatment with high stable Calcium based granular disinfectant for water treatment, more stable than Chlorine Gas, and stronger than bleachingpowder, and sodium Hypochlorite) packing in 45 kg drum complete all as specified and directed by Engr-in-Charge.

S&F in repair chlorination dosing system booster pump of capacity S/D size 1"x1"(3 HP) 4 stage with suitable coupling as as directed.

S&F in repair chlorination dosing system motor 3 phase 400/440 volts 50 c/s of 3 HP capacity all as directed.

S&F in repairs submersible pump controller type in sheet enclosure for maximum motor output 30 HP/22.5 KW with relay max range 30 to 50 Amps suitable for AC -3 duty, 415 V 50 Hz, 3 Phase AC supply with overload, Single Phasing, Phase reversal, Phase imbalance, auto restart features, IP 54 enclosure complete with Voltmeter & Ammeter , LED indication lamps, push buttons etc complete.

S&F in repairs submersible pump controller type in sheet enclosure for maximum motor output 22-30 HP with relay max range 30 to 50 Amps suitable for AC -3 duty, 415 V 50 Hz, 3 Phase AC supply with overload, Single Phasing, Phase reversal, Phase imbalance, auto restart features, IP 54 enclosure complete with Voltmeter & Ammeter , LED indication lamps, push buttons etc complete.

S&F in repair single phase preventor relay with timer for auto restart option with protection features against single phasing, phase reversal, phase unbalance etc complete with control wiring all as directed.

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

M/S ANSHUL ENTERPRISES

M/S SHRI RAM BUILDERS