Temporary Resting Queue Line Shed in between pei Gopuram to Ammaniamman Gopuram (Vada Othavadai Street) in Arulmigu Arunachaleswarar Tirukoil

Amount

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B

Supplying and Filling M.Sand Supplying and filling in 'foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.

Cement Concrete 1:5:10 (One Cement, Five M sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Supplying and Filling in Basement with Gravel in layers of not more than 15cm thick well rammed watered and consolidated etc., complete complying with standard specification and as directed by the departmental officers.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Supplying and Errecting Steel Centering including necessary Supports for Plane Surfaces for Reinforced Cement Concrete works such as column footings,Pile caps, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying, Fabricating and placing in position of RTS or MS rod for all reinforced cement concrete works as per design given including cost of steel and binding wire in all floors etc,complete complying with standard specification

Brick work in Cement Mortar 1 : 5 (one cement and Five sand) using country bricks including cost conveyance of all materiales and labour labour charges etc., complete

Upto Basement Level

Brick work in Cement Mortar 1 : 6 (one cement and Six M.ssand) using country bricks including cost conveyance of all materiales and labour labour charges etc., complete for Super Structure

Fabricating, Supplying and fixing Roof Shed, Vertical Post, Rafter, Purlin -The cost including all material Cost, Fabrication Labour Charges, Fixing labour charges, conveyance charges etc., complete as directed by department Officers.(Steel Column of 150mm dia,Truss Main Member 100 x 50 mm ,Bracing 50 x 50 mm )

Providing and fixing of PolyUrethene Foam for Slopped Roof as Thermal Insulation Panels or Sandwich insulated Panels with external 0.5 mm total Coated thickeness pre Painted Galvalume Sheet with Trapezoidal Roofing Profile having Crest height of 38 mm at every 333 mm Span,whereas internal 0.5 mm total coated thickess Pre Painted Galvanized Iron Sheet with micro ribbed Pofile and the insulation material will be chlorofluoro Carbon and hydro chlorofluoro carbon free, high performance rigid Polyurethane Foam ( PUF ) confirming to IS 12436 having density not less than 40 +,- 2 kg / m3, Thermal conductivity ( K-Value ) 0.024 w.k measured at 10 degree C mean temperature aling with necessesary flashings such as L Flashing,C Flashing etc & accesesories such as Screws,Fastners,Sealants etc for fixing the Panel etc., complete complying with Standard Specifications. W - 0373

Supply and Fixing of Anchor Rod 12 mm Dia with necessesary Thread including cost of materiales and labour charges etc complete .

Supply and fixing of Hexagonal Nutts with washers etc complete .WR-M0043

Providing Gronolothick Floor Finish 40 mm Thick in Cement Concrete 1 ; 2 : 4 mix by using 10 - 12 mm iss hbg chips and M.Sand including cost and conveyance of all materials and labour charges etc complete

Supplying and Fixing Ornamental Grill work including cost of all materiales and labour charges etc complete.

Supplying and Fixing SS Gril Gate including cost of materiales and labour charges etc complete .

Plastering in Cement Mortor 1 : 5 mix to 12 mm thick with P.Sand including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete .

Paving Floor with Best Quality Design Ceramic Coloured Tiles of size 305 mm x 305 m x 6 mm any approved colour and size shape and quality laid in Cement mortor 1 : 3 to 20 mm thick using M.Sand in all floors and the Top Pointed with the white cement 0.40 kg mixed with the same colouring Pigments etc complete

Dadooing Walls with Colour Designed Ceramic Glazed Tiles of size 600 mm x 450m x 6 mm of any shape and quality laid cement mortor 1 : 2 over 10 mm base layer in all floors and the Top Pointed with the white cement 0.40 kg mixed with the same colouring Pigments etc complete

Supplying and Fixing in position of Europeon Water Closet Colour glazed of approved quality and brand with 10 Liters PVC Flushing Tank including necessesary connection to PVC Pipes including the cost of 110 mm dia PVC pipe for a length of 600 mm by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complete complying with standard specifications and directed by the departmental officers.

Supplying and Fixing in position of Indian Water Closet of size 580 x 440 mm white/colour glazed earthern ware of approved quality and brand with 'P" OR "s" trap confirming to BIS with sand cushion and forming flooring alround the closet using 40 mm broken brick jelly in lime concrete 1:2:5 ,100mm thick and finishing the top to the required slope and including necessesary connection to PVC Pipes including the cost of 110 mm dia PVC pipe for a length of 600 mm by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complete complying with standard specifications and directed by the departmental officers.

Providing and keeping in stores, shifting to the place of installation, fixing, testing and commissioning of white viterous china white color large flat back URINALwith CP angle cock spreader flushing supported by CI/MS bracket including built in waste grating, C.P. cast brass bottle trap with extension piece, wall flanges, flush piping, complete as required and as approved by department officers (Make: Parryware or equivalent)

Supply and fixing 18 to 20mm Marble Slab for Urinal Partition and Wash Basin Counter top with nosing on edges and anchored into the wall to a minimum depth of 75mm with necessary mortar packing including cost and conveyance of all materials and as directed by the Engineer in charge complying with standard specification.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

a.) 110 mm Dia Pipe

b.) 160 mm Dia Pipe

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.

Supplying and fixing of 15mm CP two way BIB Cock with Health faucet of parryware or equivalent make conforming to BIS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary.

Solid PVC Door shutters Toilet door using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rebate for housing the shutter.

SLIDING DOOR :Providing & fixing sliding door using aluminium powder coated door frame and shutter sections with matt finish, party glazed with 6 mm plaing galss and partly panelled using 12 mm thick both side prelaminated particle board, fixed with fixed & sliding aluminium channels and fittings like 2 door handles, one concealed 4 lever lock, door stopper, 2 nos- 150mm long PC Aluminium tower bolts etc. all complete.

Painting two coats over newly plastered wall surface with Water based Interior/ Exterior Emulsion Paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting Two Coats over New Iron works of best approved first quality and Colour of synthetic Enamel Paint over one coat of zinc chromitecromite priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and Errecting of MS Stand for 2000 Lit PVC Tank by using MS Angle 50 x 50 x 6mm of1.65 x 1.65 m size and 1.50 High including cost of Materiales , Painting Two Coats and labour charges etc , complete.

Providing Electrification as per sub Esstimate

Wiring with 2x1.5sq.mm.PVC insulated unsheathed FRLSS Copper Conducto r of 1100V grade in suitable PVC rigid pipe on wall and Ceiling with PVC accessories with Module Switch box with 5A Module switch on Wall with wall covered with Module Front Plate with Painting of suitable colour for open PVC light point / fan point (for electronic regulator) ( Data A1 )

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( GI ) with module cover plate (plastic) on wall with connections. Lower End SD 388

Supply and fixing of 2 nos.6/16A two module socket , 2 nos. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Lower End SD 404

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm fan down rod including Supplying and Fixing of Fan Clamp on existing MS Truss ( Data -A2 )

supply and fixing of 100W LED High Bay fitting with LED (Higher end) on roof top with suitable hanging support from Roof with PVC unsheathed copper leads from terminals to the fitting. Data - A 3

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion (SD 336 )

Supply and run of 4 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable heavy gauge PVC Rigid Pipe on wall and ceiling with continous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour (SD 344 )

Supply and fixing of 8 way Vertical Triple Pole and Neutral MCB Sheet Steel enclosure distribution Board with Double Door ( Metal ) with 1. no 63A 4P MCB Switch as incoming and 3 nos .32A 3P MCB , 15 nos .6A to 32 A SP MCB as Out going on wall with earth connection only .Higher End ( SD 577 )

Supply and fixing of 4 way Single Pole and Neutral MCB Sheet Steel enclosure distribution Board with double Door ( Metal ) with 1. no 40 A DP RCB 30MA Switch as incoming and 2 nos .6A TO 32 A SP MCB as outgoing wall with earth connection only .Higher End ) (Data A4 )

Supply and clamping of 3.5C x 25 sq.mm PVC armoured LTUG aluminium cable on post or on wall with clamps (SD 200)

Supply and fixing of brass cable gland suitable for 3.5C x 25 sq.mm PVC armoured LTUG aluminium cable with earth connection (SD 164)

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD 213)

Earthing with the ISI Specification with an Eart Eloctrode 2.10 metre 'B' Class GI Pipe of dia not less than 40mm with Copper Earth Plate of size 125 x 50 x 6mm with necessesity funelling arrangements with necessesary masonry work and with 38mm RCC Cover Slab for the brick masonry ( SD - 211 )

Supply and Run of 1 of No.8 . SWG Copper wire in suitable PVC Rigid Pipe on Wall /Floor/Ground for earth connection (SD-371

Water Supply Arrangements

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.(a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents /Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No. Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact

Supply and providing 1000 litres capacity Priming Tank made up of PVC Make: SINTEX/EQUIVALENT.

Supplying and fixing of SS Drinking water Sink of size 1200 x 550 x 180mm with two taps provisons exculsive of tap cost and waste hose other acccessories etc

Supplying and fixing SS Heavy Duty Long Body Tap 15mm

Supplying and fixing 5 HP / 3 Phase, mono block pump of approved make and quality with ISI mark with necessary accessories and fixed with delivery pipe erected in the bore well with necessary clamp etc., with following additional accessories 1 No of 3 Phase Star Delta Starter of 63 AMPS of approved quality and make with ISI mark 1 No of 3 Phase 63 AMPS Main Switch of approved quality and make with ISI mark. 1 No of priventor of approved quality and make with ISI mark 1 No of panel board of required size with indicator fuse unit voltmeter with necessary provision toaccomodate the starter and mini starter etc. 1 No of capacitor with board as per standards of TNEB M-1065

Supplying and fixing 65mm dia HDPE pipe for sub-mergible pump in Bore well (class-5 1 MPa or 10 Kg / cm2 pressure) of best approved quality including welding wherever necessary etc., complete as directed by the Executive Engineer. The pipe should be got approved by the Executive Engineer before use on works. M-1642

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, SS clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. ( Below Ground Level)

50mm dia

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, SS clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. ( Above Ground Level)

50mm dia

32 mm dia

15 mm dia

Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements

50 mm dia TEE

50 mm dia Elbow

50 mm dia Coupler

50 mm dia Bend

32 mm dia TEE

32 mm dia Elbow

32 mm dia Coupler

32 mm dia Bend

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, SS clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works.

50 mm dia

HariRam Constructions (BID ID -1376821)