Repair and maintenance work like scrapping work, plaster work, interior and exterior distempering/painting putty etc. Qtr No. 437 to 468 Type-II total 32 Nos at GC CRPF, Neemuch

Amount

Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc.complete

Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required toachieve even shade and colour. Old work (one or more coats)

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm(weight not less than 12.5kg/sqm)

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes& lead at site within 50 metre lead as per direction of Engineer-in-charge. Up to 150 mm diameter

Providing and fixing soil, waste and vent pipes : 100 mm dia. Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.

Providing and fixing soil, waste and vent pipes : 75mm diameter Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet. Sand Cast Iron S&S as per IS- 1729

Providing and fixing plain bend of required degree. 100 mm dia. Sand cast iron S&S as per IS - 1729

75 mm dia. Sand cast iron S&S as per IS -1729

Providing and fixing single equal plain junction of required degree : 100x100x100 mm. Sand cast iron S&S as per IS - 3989

75x75x75 mm. Sand cast iron S&S as per IS - 1729

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Single tee with door. 110x110x110 mm each

Bend 87.5°. 110 mm bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M_S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

SHIV ENTERPRISES

YOGESH KUMAR AND CO

K arjun kumar

RAKESH KUMAR

RAJ LAXMI SALES AGENCY

HONEST ENTERPRISES AND SUPPLIERS

HABRICK COMPANY

GYAN GANGA ASSOCIATES