Constt. of Birth Waiting Home at CHC Gool in Distt.Ramban (Under Health DP)

Amount

Earh work in excavation by manual means over areas ( exceeding 30 cm and up to 1.5 mtr in width and 1.5 mtr in depth as well as 10 sqm on plan ) incl. disposal of excavated earth up to 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in: All kinds of soil.

Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering .All work up to plinth level . 1:4:8 ( 1 cement :4 fine sand :8 graded stone aggregate 40 mm nominal size ) Nallah. including all carriage

Provinding and laying in position, specified grade of reinforced cement conc. excluding the cost of centering, shuttering, finishing and reiforcement. All work up to plinth level. 1:2.4 (1 cement:2 coarse sand :4 graded stone agg. 20 mm nominal ) including all carriage complete

Random Rubble Masonry with hard stone from Nallah in foundation & plinth including levelling up with cement concrete 1:6:12 ( 1 cement :6 coarse sand :12 graded stone agg.20 mm nominal size ) at plinth level with Cement mortar 1:6( 1 cement : 6 coarse sand) incluidng all carriage complete

Brick work with common burnt clay F.P S ( non modualar) bricks of class designation 75 in foundation and plinth cement mortar 1:6 (1 cement :6 fine sand incluidng all carriages complete

Extra for brick work in super structure above plinth level lupto floor V level.

Providing and laying Reinforcement cement concrete 1:1.5 :3 (1 cement:1 1.5 coarse sand :3 graded stone agg. 20 mm nominal ) in suspended floors, balconies, landings, and stair cases having slope upto 15, excluding the cost of centring shuttering, All work up to floor v level.including all carriage complete

Reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete upto plinth level Thermo Mechanical Treated bars.

Centring and shuttering including strutting propping etc. and removal of form for :-Suspended floors, roofs, landings, balconies and access platforms.

Lintels, beams , plinth beams, girders, bressumers and cantilevers

Columns, Pillars, piers, abutments, posts and struts

Edges of slabs and breaks in floors and walls under 20cm wide

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastenersof required dia and length (hold fast lugs or with dashfasteners shall be paid for separately): First Class kail wood

roviding 40x5 mm flat iron hold fast 40 em long including fixing to frame with 1Omm diameter bolts, nuts andwooden plugs and embeddings in cement concrete block30x1 Ox15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal siz

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windowsincluding lSI marked M.S. pressed Butt hinges brightfinished of required size with necessary screws excludingpanelling which will be paid for separately,al! complete as per direction of engineer- in charge.2nd class kail wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebatesto be measured). Panelling for panelled or panelled andglazed shutters 25 mm to 40 mm thick Decorative ply wood one side decorative veneer and commercial veneer on other face (type 1) conforming IS 1328 BWR type

Providing and fixing glazed shutters for doors, windowsand clerestory windows using 1Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqmhinf!eS bright finished of required size with necessary 35 30 screws 2nd class kail wood.

Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze .of average width foraperture 1.4 mm in both directions with wire of dia. 0.63mm for doors, windows and clerestory windows:

20 mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) including all carriages complete

12mm Cement plaster of mix:1:4( 1 cement :4 fine sand)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size) over 75mm bed of dry brickballast 40mm nominal size well rammed, consolidatedand grouted with fine sand including finishing the top smooth

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 asper IS : 1868) transparent or dyed to required colour andshade with necessary screws etc. complete.125 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 asper IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 250 x16 mm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Finishing walls with water proofing cement paint ofrequired shade 1 New work (two or more coats) applied @3.84 kg/1 Osqm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mmthick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement andmatching pigments etc. complete Size of tile 60x60cm