REPAIR TO PLASTERING, BRICK WORK, FLOORING, JOINERY, PLUMBING, SANITARY FITTING AND OTHER MISC WORK AT JCOS/OR MD ACCN (BHAGAT LINE) IN ZONE-III UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete all as specified and directed.

M&LCement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete including sub base of floors complete.

Material & labour for 25mm thick PCC 1:2:4 type B-2 (using 20mm graded crushed stone aggregate) as in flooring, etc finished the surface even & fair complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L for coloured chequered cement concrete (including dismantling) tiles 30cmx30cmx20cm thick, set on CM (1:2), 12mm thick screed grouted with cement sand mortar 1:3 mixed with water proofing compound as per manufacture's instructions and pointed in neat cement slurry in floors with grey cement and no pigment including dismantling of old unserviceable tiles complete all as specified and directed.

Taking down of chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed.

All as per item No 6.00 here-in-before but area exc 1.50 Sqm but n-exc 4.0 Sqm each complete all as specified and directed.

Taking down of sutters of size n-exc 1.0 sqm each complete all as specified and directed.

Taking down of sutters of size exc 1.0 sqm but n-exc 2 Sqm each complete all as specified and directed.

Supply and fixing for mild steel framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or toeht covering runnign rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed.

S&F for built in steel cup board with pressed steel frame of size 75mmX45mmX1.25mm thick with pressed steel shutter 1mm thick Godrej pattern fixed to massonary wall by hold fast made out of 25x3mm flat iron including MS hanging rod of 10mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of MS peg set of 3 pegs, locking arrengments including spray painting with two coats of synthetic enamel paint over a coat of red oxide primer to all around on steel surface of frame and shutter and making good distrubed portion in CM 1:3 or PCC 1:2:4, type B0 using 12.5mm graded stone aggregate complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm mild steel sheets complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fitting lungs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm mild steel sheets complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 (20mm graded agg) filling in pressed door chowkat/hold fast blocks complete all as specified and directed.

Supply and fixing made plain framed panelled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venered particle board with commercial veneering on both faces, the size of rail at stile as per IS: 1003 Pt-I kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fixing for 35mm thick glazed and skeleton shutters of 2nd class hardwood open nebated and prepaired to receive glass gauge etc, (with sash bars) edgeg of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 clause 8.20(a) complete all as specified and directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note:- stainless steel butt hinges and necessary S S screws shall be paid separately

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

Supply and fixing for 100mm long but hinges heavy duty cold rolled mild steel medium weight complete all as specified and directed.

Supply and fixing for aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long complete all as specified and directed.

Supply and fixing for aluminium alloy anodised sliding door bolt 250mm long with haps staple bolt type and fixing clips of sheet etc complete all as specified and directed.

Supply and fixing for 150mm long aluminium handles cast type anodized complete all as specified and directed.

Supply and fixing for 300mm mild steel ordinary rat rail rod pattern spring incl roller & roller plate complete all as specified and directed.

S&F Box type steel window comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc as including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame complete all as specified and directed.

Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane incl one coat of synthetic enamel paint to oil putty complete all as specified & directed.

All as per item No. 26.00 here-in-before but pin headed glass 3 mm thick complete all as specified and directed.

Supply & fix galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

Supply & fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

S&F facroty Made 20mm thick 100% Solid WPC (Wood polymer Composite) plain Board of required size comprising of virgin PVC resin of K valve 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood powder/rice husk/ wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650Kg/cbm manufactured by as ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge), minimum compressive strength of 50 n/Sq.mm, modulus of elasticity 850N/Sq.mm and resistance of spread of flame of class A category with property of being Termite/Borer Free. Water/Moisture proof, Fire Retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. Material test certificate and authentication should be complusary provided by the manufacturing company for Cabinate/Kitchen cupboard including 35mm necessary frame complete all as spd & directed.

Material and labour for preparation of new wooden surface of any desciption over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface incl preparation of surface over having 10cm width or girth complete all as specified and directed.

Supply and fixing in repair 20 mm dia mild steel powder coated curtain rods with wall thickness 1 mm including mild steel powder coated, bracket, holding and funnel on ends as fixed in repairs complete all as specified and directed.

Supply and fixing in repair 15mm bore bib taps. Standard of PTMT any colour high pressure screwed for iron pipe (minimum weight of pillar tap 90 gms) complete all as specified and directed.

Supply and fixing in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed.

Supply and fixing in repair 15mm bore stop valve/angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed.

Supply and fixing PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed.

All as per item No 39.00 here-in-before but length 600mm complete all as specified and directed.

Supply and fixing in repair 125mm cast copper alloy chromium plated shower rose fancy type fixed to 15mm bore pipe complete all as specified and directed.

Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia ‘D’ type 60 cms long between flanges complete all as specified and directed.

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan white orissa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including plastic water closet seat white/black, connection to out going pipe and flushing pipe complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan single piece wc with including PP soft close slim seat cover with complete accessories of size 365x675x740mm S Trap 220mm white complete all as specified and directed by Engineer-in-Charge (Code: ECS-WHT-851S220SPPSM. Make:CERA or equivalent in Jaquar & Prayag as approved by GE.

S&F in repair plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply and fixing in repair vitreous china wash hand basin white flat back size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed.

Supply and fixing in repair vitreous china wash basin white oval type size 580x 450mm excluding taps but incl 32mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed.

Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wasters incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) complete all as specified and directed.

Supply and fixing 15 mm bore GI tubes medium grade with all fittings and fixtures complete to walls and ceilings or laid in floors of any length including taking down old unserviceable GI tubing complete all as specified and directed.

All as per item No 51.00 here-in-before but for 20 mm dia complete all as specified and directed.

Refixing old steel tubing 15mm bore and connections in new or old position (Walls, ceiling, floors, etc.) including taking down old unserviceable complete all as specified and directed.

Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.) including taking down old unserviceable complete all as specified and directed.

Supply & fix in repair PVC waste pipe 32mm dia for wash hand basin complete all as specified and directed.

Supply & fix in repair glass self assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets complete all as specified and directed.

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

Supply & fix in repair chromium plated, ABS plastic with stainless steel tube with PVC holder jet health faucet fixed in WC seats complete all as specified and directed.

Supply & fix in repair brass chromium plated wall mixer suitable for both telephonic shower and overhead shower with long bend pipe complete all as specified & directed.

Supply & fix in repair 15mm dia single lever one hole basin mixture of superior quality with capstan heads, cromium plated cast copper alloy with hot and cold arrangements with long shank and cup , screws for iron pipe fixed complete all as specified and directed.

Supply & fixing in repair steel CP grating 100/125 mm dia incl waste hole where required at site complete all as specified and directed.

Supply and fix non skid glazed ceramic tiles(any shade) 400mmx400mmx7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor laid over & including 15mm thick screed bed in CM 1:6 (including dismantling of old unserviceable tiles) complete all as specified and directed.

Supply & fix Light shade vitrified tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor laid over & including 10mm thick screed in CM 1:4 and all as per manufacturer's instruction (including dismantling of old unserviceable tiles) complete all as specified and directed.

Supply & fix Light shade vitrified double charged tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor laid over & including 10mm thick screed in CM 1:4 and all as per manufacturer's instruction (including dismantling of old unserviceable tiles) complete all as specified and directed.

All as per item No. 64.00 here-in-before but in skirting / dado and laid over & including 10 mm thick screed bed CM1:6 complete all as specified and directed.

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4 (including dismantling of old unserviceable tiles) complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing (including dismantling of old unserviceable tiles) complete all as specified and directed.

M&L for Udaipur Green Stone polished 16 to 18mm thick(table rubbed &polished) in steps, jambs, window cills, cooking platforms, sink and the like in CM 1:4 incl pointing in white cement mixed with pigment to match shade of stone incl rounding of edges and making holes for gas pipe complete all as specified and directed.

Supply and fixing in repair stain less steel plate rack of size and design as approved of GE made out of 1.00mm thick stainless steel (Salem sheet) and having weight between 9.0 Kg to 9.5 Kg each complete all as specified and directed.

M & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection including taking down old unserviceable PCC complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 including demolition of old brickwork complete all as specified and directed.

M&L brick work with sub class' B' bricks (except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 including demolition of old brickwork complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L for applying 15mm thick rendering using ready mix plaster bags on brick or concrete surface of external/external wall finished even and smooth. Note: contractor is required to deposite ready mix bags for 100% CA quantity to Engr-in-Charge with in 15 days of issue of work order No 1 of contract complete all as specified and directed.

M&L for applying 5mm thick rendering using ready mix plaster bags on brick or concrete surface of ceiling finished even and smooth. Note: contractor is required to deposite ready mix bags for 100% CA quantity to the office of Engr-in-Charge with in 15 days of issue of work order No 1 of contract complete all as specified and directed.

Materials & labour for preparation of new plastered surface of walls etc and applying two coats of OBD over and including 2mm thick Birla/JK wall care putty to match the existing surfaces of wall as required complete all as specified & directed.

Materials & labour for preparation of old plastered surface of walls etc and applying two coats of OBD over and including 2mm thick Birla/JK wall care putty to match the existing surfaces of wall as required complete all as specified & directed.

Materials & labour for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified & directed.

All as per item No. 80.00 here-in-before but one coat on old ceiling surface complete all as specified and directed.

M & L preparation of new plastered surface of wall and applying two coat of cement base paint over & including one coat of chalk whiting primer on wall complete all as specified and directed.

M & L preparation of old plastered surface of wall and applying two coat of cement base paint over & including one coat of chalk whiting primer complete all as specified and directed.

Supply and fixed in repair double action floor spring hydraulically door closer regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed.

S&F in repair 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes complete all as specified and directed.

All as per item No 85.00 here-in-before but 75mm dia bore pipe complete all as specified and directed.

Suply and fix in repair 75mm bore PVC (SWR) bends any redious complete all as specified and directed.

Supply & fix in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Suply and fix in repair 110mm bore PVC (SWR) bends any redious complete all as specified and directed.

Supply & fix in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 110 PVC (SWR) vent cowl complete all as specified and directed.

Dismantling of old RCC water tank exc 250 Ltrs & n.exc 500 Ltrs capacity and Supplied, hoisted and fixed inposition rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity three layered with and including 20mm dia with brass float valve assembly complete all as specified and directed.

Dismantling of old RCC water tank exc 500 Ltrs & n.exc 1000 Ltrs capacity and Supplied, hoisted and fixed inposition rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity three layered with and including 20mm dia with brass float valve assembly complete all as specified and directed.

Supply & fixing in repair 20mm bore, PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 15mm/20mm bore complete all as specified & directed.

M&L for precast reinforcement cement cement comcrete (1:2:4) type B-1 using 20mm graded stone aggregate as in landings, chullah hoods, chajjas, water troughs, mangers shelves and similar articles set in CM (1:6) incl all necessary form works and finishing exposed concerete surface including demolition of old reinforced cement concrete of any description and in any position complete all as specified and directed.

VIRAT CONSTRUCTIONS

jitendra AND Co

M/S AMAR ELEKTRO CENTRE

Tayal Builders

vibha associates

AMBEY CONSTRUCTION

Madan Lal Jain and Sons

Shikha Enterprises

SA construction co.