Carryout the Renovation works in TNCSC godown campuses at Manalur, Kattumannarkoil, Neyveli, Cuddalore, Thittakudi, Virudhachalam and Veppur in Cuddalore District

Amount

CIVIL WORK

Carryout the Renovation works in TNCSC Godown campus at Manalur Village, in Chidambaram Taluk, Cuddalore District. Clearing Scrub jungle

Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. A Foundation and basement

B Ground floor

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corrugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 meter) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Plain surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facial, vertical wall etc.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Renewing the broken AIW and Ventilator / window glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Painting the walls with two coats of exixting plasted surface plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing Two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Kattumannarkoil Taluk in Cuddalore District Clearing scrub junggle

Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. Ground floor

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 meter) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Plain surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facial, vertical wall etc.

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of High profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Renewing the broken AIW and Ventilator /window glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Painting the walls with two coats of existing plasted surface plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing Two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by the departmental officers.

WBM Providing and laying WBM mm compacted thickness with grade II metal using 1.00 cum of 53-22.40 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification.

WBM Providing and laying WBM mm compacted thickness with grade III metal using 1.00 cum of 63-11.20 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification.

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Veppur Taluk in Cuddalore District Clearing scrub jungle

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by the departmental officers.

WBM Providing and laying WBM mm compacted thickness with grade II metal using 1.00 cum of 53-22.40 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification.

WBM Providing and laying WBM mm compacted thickness with grade III metal using 1.00 cum of 63-11.20 mm IRC size metal with 0.24 cum of gravel for bilndage per 10 sq.mm including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants empolyed barricading etc., complete as per clause 404 0f most specification.

Carryout the Renovation works in TNCSC Godown campus at Viruthachalum Taluk in Cuddalore District Clearing scrub jungle

Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. A.Foundation Basement

B.Ground Floor

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.specification.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Plain surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facial, vertical wall etc.

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of High profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Renewing the broken AIW and Ventilator / window glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Painting the old walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing Two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Thittagudi Taluk in Cuddalore District Clearing Scrub Jungle

supply and filling in basement with wet mix 250mm thick in layers not exceeding 250mm thick well watering ramming and consolidation including machineries for higher and running charges leader 5 cum capacity hire charges for tipper water sprinkler vibtory roller etc complete and all labour charges as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Semmandalam Taluk in Cuddalore District Clearing Scrub Jungle

Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Renewing the broken AIW and Ventilator /window glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Painting the Old walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing Two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

Carryout the Renovation works in TNCSC MRM campus at Neyveli in Kurinjipadi Taluk in Cuddalore District Clearing Scrub Jungle

Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. For Ground floor

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Plain surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facial, vertical wall etc.

Supplying and fabrication of M.S Angle iron section for vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat, and .for purlins with M.S square pipe has to be fabricated including cost of one coat of primer, bolt and nuts etc., complete complying with standard specification and as per the direction of corporation officers.

Supplying and laying of High profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Renewing the broken AIW and Ventilator glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Painting the old walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing Two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).

Kaliyamoorthy