Transportation, installation, necessary fabrication, commissioning trial run including extension of one no. 1000mm width, 1x90kW, 550V, single drive belt conveyor along 5R from 80L to 74L after dismantling of 80L Tandem belt for development of Trunk

Amount

Part A. Dismantling of 207 mtr. 1000mm width 1X90kW, 550V single drive 80L Tandem belt conveyor complete from 8D to 14D at Panel-9, R-VIIA seam

Dismantling of the 1000mm width, 1x90kW, 550V, single Drive Head unit Complete with Drive Drum, Driven Drum, Gear Box, Motor, Couplings, Bearing Blocks, baseplate, fencing etc. of 80L Tandem belt conveyor from 80L/9D

Dismantling of the complete Discharge Unit with strike plate & chute plate of 1000mm width 80L Tandem belt conveyor from 80L/8D

Dismantling of the complete loop take up unit of 1000mm width 80L Tandem belt conveyor from 80L/(9D-10D)

Dismantling of the complete tail end unit of 1000mm width 80L Tandem belt conveyor from 80L/22D

Dismantling of 207 mtr. 1000mm width 80L Tandem belt conveyor structure complete with stringer, foot stool, top bracket, top roller, bottom roller, decking plate, scrapper etc. from 80L/8D to 80L/14D

Unlapping & pulling out of 432 mtr. 1000mm width PVC belting of 80L Tandem belt conveyor from 80L/8D to 80L/14D

Dismantling of pull cords with cable, communication devics with cable for a length of 207 belt conveyor of 80L Tandem belt from 80L/8D to 80L/14D

B. Transportation & installation of one no. 1000 mm width, 1x90kW, 550V, single drive belt conveyor for a length of 103.5 mtr. from 5R/80L to 5R/77L in R-VIIA seam at 3&4 Incline, J.P.Colly.

Transportation of the 1000mm width, 1x90kW, 550V Drive Head complete including gear box, motor, couplings, bearing blocks, fencing etc. from 80L Tandem belt dismantling site and installation at 5R/(79-78)L with necessary fabrication job

Transportation of Discharge Unit complete with girders, strike plate, chute plates, scrappers etc. from 80L Tandem belt dismantling site and installation at 5R/80L with necessary fabrication job

Transportation of Loop Take Up Unit complete with motorized winch from 80L Tandem belt dismantling site and installation at 5R/(79L-78L) with necessary fabrication job

Transportation of Tail End Unit complete from 80L Tandem belt dismantling site and installation at 5R/77L with necessary fabrication job

Transportation of 103.5 mtr. 1000 mm belt conveyor structure complete with stringer, foot stool, top bracket, top & bottom roller etc. from 80L Tandem belt dismantling site to 5R belt installation site and installation from 5R/80L to 5R/77L in R-VIIA seam

Loading, transportation and unloading of one ACB (550V/200A), starter (550V/90kW), LS unit, Winch starter from 80L Tandem belt, 80L/9D to 78L/4R with help of haulages & 30 mtr. Manually

Transportation of 100 mtr. 3.3kV grade 70 sq.mm. PVCDWA cable from 80L Tandem belt to 79L/3D with help of haulages

Laying-hanging of 100 mtr. 3.3kV grade 70 sq.mm PVCDWA cable from 79L/3D TSU to 78L/4R ACB manually

Transportation of 225 mtr. 1000mm width PVC belting from 80L Tandem belt dismantling site to 5R belt installation site with help of haulages & 30 mtr. manually

Laying, lapping, jointing & tensioning of this 225 mtr. 1000mm width PVC belting in proposed 5R belt

Transportation of pull cords with its cable, communication devices with its cable, signalling system from 80L Tandem Belt dismantling site to 5R belt installation site with help of haulages for 103.5 mtr. and laying-placing them from 5R/80L to 5R/77L

Testing, trial run, alignment & commissioning of this belt conveyor from 5R/80L to 5R/77L

Supply of DA cylinder

Supply of Oxygen cylinder

Supply of MS Nut&Bolt of 5/8" X 2"

Supply of 5 Ton turn buckle

Part C. Three times extension of the proposed 5R belt conveyor from 5R/77L to 5R/74L length of 103.5 mtr. in R-VIIA seam

Three times dismantling of tail end unit complete for three times belt extension of proposed 5R belt

Three times transportation and installation of tail end unit complete for three times belt extension of proposed 5R belt from 5R/77L to 5R/74L

Transportation of 1000mm belt structures (i.e. foot stools, channels, brackets, top and bottom rollers etc.) for a length of 103.5 mtr. from 80L Tandem belt dismantling site to belt extension site by haulages and installation them from 5R/77L to 5R/74L in R-VIIA seam during three times belt extension (each time belt extension will be for a length of 34.5 mtr.)

Transportation of 207 mtr. 1000mm PVC belting from surface through haulages & 30 mtr. manually to 5R belt extension site

Laying, Lapping, Jointing & Tensioning of this 207 mtr. 1000mm belting from 5R/77L to 5R/74L in R-VIIA seam during three times belt extension and trial run

Transportation of pull cords with its cable, communication devices with its cable for 103.5 mtr. belt from 80L Tandem belt to 5R belt extension site and laying & fitting them during three times belt extension

Supply of MS Nut&Bolt of 5/8" X 2"

Part D. Civil foundation works for installation of 1X90kW, 550V, 1000mm wide belt conveyer drive head, discharge unit, loop take-up unit and platform for ACB, Starter for 5R belt conveyor of 3&4 incline, JPC.

Recess cutting in stone

Muck debris cleaning

Sand filling

Brick work with Fly ash bricks of class design 75 in foundation and plinth in: CM 1:6 (1 cement : 6 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).

12 mm cement plaster of mix

Loading material into tub and unloading at site

Part E.Roof heightening by drilling blasting in stone, cleaning, roof bolting including cost of drill rod, drill bit for installation of proposed 5R belt conveyor in R-VIIA seam of 3&4 incline under JPC.

Roof heightening by drilling, blasting in stone including dressing, Cleaning & cost of drill rod and drill bit. (Excluding cost of explosive & detonator).

Roof bolting including carrying of materials, drilling, grouting & cost of drill rod and drill bit

Total impact of GST for the purpose of CTC

BABLU SINHA (BID ID -1099588)

RINA ENTERPRISE (BID ID -1099983)