COMPREHENSIVE MAINT PERIODICAL SERVICES AND REAPIR / REPLACEMENT OF INTERNAL ELECTRIFICATION OF OTM MD ACCN FOR CMP C S, DCA COMPLEX AND RMS UNDER GE(SOUTH) BANGALORE

Amount

Dismantling floor hearth/ stone slabs/mosaic tile flooring or wall tiling including cement mortar bedding (but not backing) and removing servicebale tiles to stores and rubbish off rubbish off the same out side the MD land complete all as specified and as directed.

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 20mm thick in CM 1:6 etc complete all as specified and as directed..

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 20mm thick in CM 1:6 etc complete all as specified and as directed..

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge.

S&F Virified Coloured Ceramic tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 20mm thick in CM 1:6 etc complete all as specified and as directed..

S&F Virified coloured ceramic tiles (light shade) 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge.

S&F coloured glazed ceramic tile in verticle surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick CM 1:4 backing coat complete all as specified and as directed.

M&L 35 mm thick Granite Telephonic black including round cutting work for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade o granite including cutting for securing of slab etc complete all as specified and as directed.

M& L for rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor)

M&L for 75 mm thick cement concrete 1:3:6 type C-2 finishing the cement concrete surface even and smooth without using extra cement is used for plinth protection complete all as specified and directed

M&L for 40 mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregates) as in floor even and smooth using extra cement complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth

S & F in repair of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified.

S & F in repair of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed.

S&F of 20 mm dia female/male brass threaded adapter complete all as specified and as directed.

S&F of 15 mm CP extension nipple complete all as specified and as directed.

Cleaning of air lock in GI/CPVC/UPVC pipe 15/20/25 mm and making the water supply available upto water taps including taking down and refixing of pipes attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified.

S & F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 50 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC bends any radius 75mm dia

S& F in repair PVC bends any radius 110mm dia

S&F in reapir PVC bends any radius 110 mm dia with access door

S&F in repair PVC bends any radius 75 mm dia with access door

S&F in repair PVC Single T any radius 110 mm dia with access door

S&F in repair PVC Single T any radius 110 mm dia

S&F in repair PVC (SWR) 75 mm vent cowl

S&F in repair PVC (SWR) 110 mm vent cowl

Cutting holes into or through brick walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area n. exc 150 Sqcm but n.exc 400 Sqcm complete all as specified and as dircted.

Cutting holes into or through Stone walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area n. exc 150 Sqcm but n.exc 400 Sqcm complete all as specified and as dircted.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed..

M&L for rendering 15 mm thick in cm 1:4 on fair faces of brick work or concrete surfaces such as wall finished even and smooth with out using extra cement complete all as specified and directed.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc

M&L rendering 5mm thick in CM (1 :4) with WPC of 3% over 10 mm thick CM (1:6) on fair faces of brick work or concrete surfaces finshed even and smooth without using extra cement.

M&L for rendering 10 mm thick in cm 1:3 on fair faces of concrete surfaces such as ceiling finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces such as wall finished even and smooth with out using extra cement complete all as specified and directed.

M &L for preparation of new plastered surface and applying two coats of cement base paint on walls.

M & L for applying three coats of white wash on newly plastered surfaces incl preparing the surfaces.

M & L for applying two coats of oil bound distemper on newly plastered surfaces incl preparing the surfaces and applying one coat of alkali resistant priming paint complete all as specified and directed .

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm etc complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but n. exc 2.00 Sqm.

Cutting holes in brick walls built in cement mortar exc half brick wall but n exc one brick wall for incerting hold fast and securing bolts etc and making good dismenteled portion in cement mortar 1 : 3 or cement concrete 1 :2 :3 type B1 as required

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought frame rebated on the solid, rounded or chamfered put together with glue pinned at joints

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S&F 35 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc divided in to squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered

S&F 35mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified

S&F galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Resecuring or Easing and adjusting without taking down of shutter exc 1 Sqm and n.exc 2.0 Sqm complete all as specified and as directed

S&F stainless steel 100 mm butt hinges for doors complete all as specified.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

S&F 150 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified.

S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.

Taking down of shutter exc 1.0 sqm but n.exc 2.0 Sqm

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed by Engr-in-Charge.(Cost of hold fast included in the unit rate of this item.)

M &L factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame wedded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at side,including two Nos tower bolts/ Handles for each shutter as per specification and drawing

S&F stainless steel 75 mm butt hinges for doors complete all as specified.

S&F 100 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified.

S&F 100 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

Taking down of shutter n.exc 1.0 sqm

S&F 30 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc, but divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, any number sto squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered

S&F galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples.

S&F sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.

Resecuring or Easing and adjusting without taking down of shuttern. exc 1 Sqm complete all as specified and as directed

S&F stainless steel 75 mm butt hinges for doors complete all as specified.

S&F 75 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified.

S&F 75 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.

S&F in repairs steel windows with side hung shutters including projecting type hinges with steel handle of size 100mm, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.

S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed

Repairs to existing steel window / Ventilator hinges by means of replacing the old hinge with box type and welded to steel shutter and frame , easing the shutter,and making good the suface finsh to match extg wall surface complete all as specified and directed

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zincchrome primer complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.

S&F anodised aluminium frame for doors, windows vetilators with one of more rebates incl joining cleat for fixing etc, with powder coating complete all as specified.

S&F 4 mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.

M&L II class hard wood plain fillets exc 13 & n exc 25 sqcm square,rectangular or triangular in section,clean sawn se-cured with nails/screws including two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified.

Taking down of shutter n.exc 1.0 sqm

S&F in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated one sides with decorative choice lamination and balancing white lamination including PVC edge lipping fixed with screws to timber frame work complete all as specified.

M&L 12 mm ply wood,grade BWR,type BB,fixed with screws to timber frame work complete all as specified and directed.

M&L 12 mm ply wood,grade BWP,type BB,fixed with screws to timber frame work complete all as specified and directed.

S&F stainless steel 75 mm butt hinges for doors complete all as specified.

S&F 75 mm brass handles,cast type polished bright complete all as specified and directed.

S&F magnetic catch for cabinets/cub board shutters of approved quality and of suitable size, complete all as specified and directed by Engineer-in-Charge.

S&F soft closing kitchen cabinet hinges, stainless steel, bright finish or electrogalvanised, of approved quality, complete all as specified and directed

S&F powder coated MS telescopic channel with roller for drawer complete all as specified and directed.

S&F continuous (Piano) hinges, mild steel, bright finish or electro galvanised width of flaps 30 mm when open complete all as specified.

S&F MS 40mm dia, drawer/cupboard knobs fixed with nut, screw and washer of brass polished, bright finished complete all as specified.

S&F 100 mm long Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all specified.

S & F in repair anodise aluminium alloy curtain rod with fixing brackets, stop, etc complete all as specified and sample approved by GE.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples.

S&F 2nd class hard wood /Aluminium plain fillets, Square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads , sectional area exc 3 Sqcm and not exc 6 Sqcm including two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified.

Hacking out old broken glass exc.1.5 sqm (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F in repairs sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frameand wooden beading in wooden frame complete all as specified.

S&F in repairs 2mm thick acrylic sheet in square n.exc 0.50 Sqm in each pane fixed with screws in steel windows of G+3 Storey bldgs complete all as specified.

S&F in repairs 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.

S&F in repairs 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F in repairs stainless steel 100 mm butt hinges for doors complete all as specified.

S&F in repairs continuous (Piano) hinges, mild steel, bright finish or electro galvanised width of flaps 30 mm when open complete all as specified.

S&F in repairs 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified.

S&F in repairs MS pressed handles , oval type, stove enameled black 150 mm size complete all as specified and directed.

S&F in repairs 100 mm long Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all specified.

S&F in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.

S& F in repair Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

S&F in repairs floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified

S&F brass 4 levers mortice lock, vertical type, size 100mm complete all as specified & directed by Engineer-in-Charge.

S&F in repairs fancy type brass bracket with screw 25 mm dia including wooden plugs

S&F in repairs fancy type brass bracket with screws for wall corners 25 mm dia including wooden plugs

S&F in repairs fancy type aluminium powder coated curtain rods 25 mm dia

S&F in repairs peg set of 06 Nos mild steel chromium plated 45 cm long fixed with Mild steel screws fixed in repair complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed.

S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete in all respect all as specified

S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bendetc. complete all as specified and directed

S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type/ Pedstal type WC complete all as specified.

Petty repairs to leaking low level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC siphons, leaking PVC bends/GI pipes etc. complete all specified and directed by Engineer in charge

S&F in repairs PVC internal fittings (ie syphon) for low/high level flushing cistern complete all as specified.

S&F in repairs PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for hot water complete all as specified.

S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repair 32 mm dia PVC waste pipe for WHB/Kitchen sink complete all as specified.

S&F sink made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 24x18 inches , including PVC waste pipe 40 mm dia complete all as specified and directed.

S&F in repairs angle iron brackets/rack bolt for WHB & kitchen sink including making good to existing surface including taking down WHB/ Sink and refixing the same complete all as specified.

M&L in repairs 32mm dia Waste coupling, brass, chromium plated for SS Kitchen sinks, WHB etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

S&F in repairs Bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe.

S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F 15 mm bore diameter brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule.

S&F 15 mm bore diameter brass CP washing machine tap complete all as specified and as directed.

S&F 15 mm bore diameter brass CP wall mixture any type complete all as specified and as directed.

S& F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms).

S&F pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.

S&F in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with overhead shower with bend pipe complete all as specified.

S&F in repairs stop valves male/female threaded 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed both ends for iron/CPVC pipes or for unions complete, fixed in repairs, all as specified and directed .

S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed .

S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed .

S&F in repair brass spindle for pillar taps, stop valves, bib taps, angle valves, concealed stop cocks & wall mixer cock for 15mm by changing jumper valves, washers etc complete all as specified

S&F in repairs shower rose 15mm of brass chromium plated 125 mm dia round with shower arm of 190mm Long Light Body complete all as specified and directed.

S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed.

S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified.

S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs Glass corner shelf including CP railing, radius 300 mm complete all as specified and directed by the Engr-in-Charge, fixed in repairs.

S&F in repair tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S&F in rapairs SS soap dish 100mm Complete all as specified and directed."

S&F in rapairs SS Towel ring 150 mm Complete all as specified and directed."

S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 1200 x 900mm x 200mm width of trade pattern complete all as specified.

S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismatling and removing to store all as specified

S&F CPVC ball valve 20 mm dia complete all as specified and as directed

S&F Tank union 20 mm dia complete all as specified and as directed

S&F Tank adapter 20 mm dia complete all as specified and as directed

S&F 20 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete, fixed in repairs, all as specified.

S&F 20 mm bore nipple suitable for HDPE water tank. (Min wt 45 gms).

S&F in repairs HDPE PVC lid (cover) for 500 ltrs/1000 ltrs capacity PVC tank complete all as specified.

Materials and labour for cleaning of water tanks of capacity exceeding 250 litres and not exceeding 500 litres including cleaning of bottom and internal surfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed.

Materials and labour for cleaning of water tanks of capacity exceeding 500 litres and not exceeding 1000 litres including cleaning of bottom and internal surfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed.

Dismantling of old water proofing treatment and roof tiling including screed bed and cleaning the surface with wire brushes removing dust, foreign material and rubbish off the same out side the MD land complete all as specified and as directed.

M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof/Chajjas kerb or mud stops, rounded or chamfered as pading concerete.

M&L for 40 mm thick cement concrete (1:2:4) type B-0 (using 20mm graded stone aggregates) as in floor even and smooth using extra cement complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 on floor/roof /Chajjas surfaces mixed with WPC @ 200 ml per bag of cement finished the surfaces even and smooth without using extra cement all as specified and as directed.(WPC will be measured and paid separetly)

Supply only liquid Integral water proofing compound complete all as specified and as directed.

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017 3mm thick and weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified.

Removal of vegetation/tree growth etc on external surface of walls or on roof top in two/four storey building by taking all necessary precaution to the workers and also the adjacent govt properties including digging out of filling holes with PCC 1:2:4 type B1 using (20 mm graded stone aggregate) and finishing the surface to match adjacent surfaces after application of suitable chemical using " break" manufactured by M/S denocil company or equivalent to avoid re growth of the vegetation and removing the debris to outside the MD land complete all as specified and directed(Any damage to the adjacent govt properties like glass windows , pipes lines etc to be made good without any extra cost for plants girth not exc 5 cm

All as above item No for plants girth exc 5 cm and n.exc 15 cm

M&L for preparation of old decorated/painted surfaces of ceiling and applying one coat of white washing including cleaning of splashes of white wash on floor/objects etc all as specified and directed.

M&L for preparation of old decorated /painted surfaces of ceilng and applying one coat of oil bound distemper all as including cleaning splashes of distmeper on floor/objects etc all as specified and directed.

M&L for preparation of old decorated /painted surfaces of ceilng and applying one coat of oil bound distemper over a coats of 1mm thick wall care putty all as including cleaning splashes of distmeper on floor/objects etc all as specified and directed.

M&L for preparation of old decorated/paintedsurfaces of walls and cornices and applying one coat of white wash including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / dropping all as specified and directed.

M&L for preparation of old decorated/painted surfaces of walls and cornices and applying two coat of white wash including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / dropping all as specified and directed.

M&L for preparation of old decorated/painted surfaces of walls and applying one coat of Oil bound distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, all as specified and directed.

M&L for preparation of old decorated/painted surfaces of walls and applying Two coat of Oil bound distemper over a coat of 1mm thick wall care putty including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, all as specified and directed.

M&L for preparation of old distempered surfaces of walls and applying two coat of Oil bound distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, all as specified and directed.

M&L preparation of old decorated surfaces of walls externally and applying one coat of cement based paint including cleaning all window panes from splashes / dropping of all as specified

M&L for complete removal of existing treatment by wire brushing, rubbing down with water of old painted surfaces of walls and applying two coats of cement based paint over a coat primer , including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and directed.

M&L for complete removal of existing treatment on old plastered surface of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L preparation of old painted surfaces of wood work and joinery exceeding 10 cm width or girth and applying one coat synthetic enamel paint all as specified

M&L preparation of old painted surfaces of steel and iron work exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge fixed with J- hook bolt and nut complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Fe-290 Gde E-165 mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

S&F mild steel for wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Cutting chases, pinning in making good to facings where required and pointing in CM 1:3 to edges of sunshades/walls etc complete, cutting not exc 10 cm girth

M&L for clean sawn Second class hard-wood in timber framed scantlings complete all as specified and as directed.

Petty repair to leakage of BIb taps, Piller taps, Angle cock, Wall mixture, Flushing cistern, Shower rose, Flush pipe by changing jumper valves , washers, No water supply Complaints (Including down and refixing of pipes), removal of airlock and making functional, ensuring proper water supply. complete all as Specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation oards/slabs/ blankets, any thickness, including cover fillets

M&l for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted timber/GI/Aluminium framework with screws

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials and making good disturbed surfaces of walls, floors etc.

M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS)including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, and fixed in existing sunk boxes and covered with new 3.00 mm thick ISI marked laminated sheet cover and brass screw with cup washers for fixing switches/sockets/regulators etc.

(a) One light/CB point controlled by one switch

(b) One fan point controlled by one switch.

(c ) One 3 pin 5 Amps socket outlet point on independent board

(d) One 3 pin 5 Amps socket point on the same board with other switches

(e) One light point controlled by two two way switches

All as per srl item no 205 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket.

M&L for point wiring with surface type with PVC insulated, unsheathed, single core multistandard copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through PVC conduit and fixed in sunk boxes and covered with 3.0mm thick ISI marked laminated sheet cover and brass screw with cup washers for switches/sockets/regulators etc.

(a) One light /CB point controlled by one piano type switch single pole one way.

(b) One fan point controlled by one switch.

(c) One 3/2 Pin 5 Amp socket out let point on the independent board.

(d) One socket outlet 3/2 pin, 5 Amp, point on the same board with other switches.

(e) One light point controlled by 2 way switch 5 amp single pole.

All as per srl item no 207 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket.

Taking down old unserviceable switch, socket 5/15 Amps, ceiling rose, regulator, bell push and call bell etc

M & L in replacement switch piano, flush type single pole, one way 5 Amps

M & L in replacement switch piano, flush type single pole, two way 15 Amps

M&L in replacement switch socket outlet 2in1, 3pin,5A

M&L in replacement switch socket outlet 2 in 1, 3 pin, 5 Amps and 15 Amps flush type.

M&L in replacement ceiling rose surface bakelite 65x50 mm two to three terminals.

Supply and fix stepped type electronic fan regulator flush type, 230 volt, AC complete.

M&L in replacement of bell push, flush type, 5 Amps.

M&L in replacement of call bell AC, 230 volts single pole

Taking down old unserviceable MCB DB 4/8 way from site sheet metal enclosure

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 10 Amps all as specified and directed .

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.

S&F MCB DB for 8 way, double door 240 Volts 200Amps rated bus bar 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.

Taking down old unserviceable MCB TPN, SPN/SP any size any capacity

Supply and fixing in replacement MCB TPN 415 Volt 63 Amps

Supply and fixing in replacement MCB SPN 6 -40 Amps, 240 Volts

Supply & fixing in replacement MCB SP 06-40 Amp, AC, 240 volts,

Taking down old unserviceable Sub main wiring 4/6 Sqmm from site

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through existing conduit complete all as specified and as directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through existing conduit complete all as specified and as directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

Taking down old unserviceable light fittings any size any capacity

Supply and fixing surface mounted Mini Mirror light LED batten 2 feet with extruded aluminium housing and robust construction 10 W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose all as specified and directed by Engr-in-Charge.Make- Crompton cat part No- CCS-103-10-65-SL-DP-NWH or equivalant of Baja/Philips

Supply and fixing surface & wall mounted LED batten 4 feet with extruded aluminium housing and robust construction 20 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and directed by Engr-in-Charge. Make- Crompton cat part No- CCS-103-20-65-SL-DP-NWH or equivalant of Wipro/Philips

S&F LED Bulkhead light fitting 10 Watt Environmental friendly , ultra modern , energy saving , surface mounted , decorative oval bulk haed edge lit LED luminarie comprising of high brightness LEDs including connetcion of fllexible copper wire 2 core from fitting ceiling rose/connection point Make- Crompton cat part No- LBHP-10-CDL 10W LED or equivalant of Wipro/Philip

Supply and fixing LED recess mounting 2x2 fittings full fit luminarie with glare free uniform illumination with longer life and less maintainance 36 Watt Make- Crompton cat part No LCTLRF7-36-CDL or equivalent of Wipro/Philips

M&L for opening , cutting and taking out complete winding coils of ceiling fan of 1200/1400mm sweep of any make , rewinding the same with super enamaled copper winding wire as per original pattern including varnishing complete and asembly after oiling greasing and replacing the worn out nut bolts and washers bearings etc and testing the ceiling fans on load for two hours complete all as specified and directed.

All as per item No-26 here in before but exaust fan of sweep 250/300mm

Taking down old unserviceable earth plate and accessories from site

M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed

Supply and fix of ceiling fan complete with electronic type regulator and accessories 230 V, 1200mm sweep, BEE 5 star rated, ISI standards, RPM1200,340 Air Delivery 200CMM, down rod length 267mm, rust - free powder coated finish and pre-wired and including connecting up with twin core twisted flexible copper conductor cable with connector including dismatling old one deposit to AGE E/M Store yard complete. Make - Bajaj Kassels 50 ISI Product code 250468 or equivalent make of Havells/CG

Supply and PVC Body sound proof Exhuast fan 250 mm size with single phase 230 Volt 900 RPM with louvers complete.making a hole in wall or exsinting windo grill cutting and 12mm plywood suitable size of exaust fan make hole and fixing the window nutr bolt washers and after finishing work distrubed surface of wall complete all as specified and directed by E-in-C including dismatling old metal body & deposit to AGE E/M Store yard complete. Make - Bajaj Product code 70049 or equivalant to Havells/CGUsha /Baja/CG

S&F in replacement Modular Switch 1 Way 6 Amps 1 Module

S&F in repplacement of Modular Fan Regulator 120 Watt 2 Module

S&F in replacement of Modular Socket 2/3 pin combined 2 Module

S&F in replacement metal flush box 8 Module

S&F in replacement white cover plate with frame 8 Module

S&F in replacement Plug top 3 pin 5Amps ISI marked Make- Anchor /Plaza/Kinjal

S &F in replacement Plug top 3 pin 15Amps ISI marked Make- Anchor /Plaza/Kinjal

S& F in replacement Capacitor of rating 2.5/3.15 mfd 230 V

Taking down old unserviceable water heater element/ thermostat

S&F in replacement Heating element 1500/2000Watt round Type complete

S&F in replacement Heating element 1500/2000Watt triangular type complete

S&F in replacement Thermostat for 25/50 Ltr cap geyser and making connection .

Taking down old unserviceable hot and cold water pipe from water heater 450/600 mm size

S&F PVC connection 15 mm bore with PTMT nuts of length 450mm

S&F PVC connection 15 mm bore with PTMT nuts of length 600mm

Dismantling of old unserviceable switch 5/15 Amps, socket 5/15 Amps, Socket combine 5/15 Amps, gangbox 5/15 Amps, fan regulator switch/ socket type etc

S&F in replacement of Switch Piano Type 5 Amps Make- Anchor /Plaza/Kinjal

S&F in replacement of Switch Piano Type 15 Amps Make- Anchor /Plaza/Kinjal

S&F in replacement of Socket outlet 5 Amps Make- Anchor /Plaza/Kinjal

S&F in replacement of Socket outlet 15 Amps Make- Anchor /Plaza/Kinjal

S&F in replacement of Socket combine 5 Amps Make- Anchor /Plaza/Kinjal

S&F in replacement of Socket combine 15 Amps Make- Anchor /Plaza/Kinjal

S&F in replacement of 5 Amp Gang box complete Make- Anchor /Plaza/Kinjal

S&F in replacement of 15 Amp Gang box complete Make- Anchor /Plaza/Kinjal

S&F in replacement of Fan Regulator switch type Make- Anchor /Plaza/Kinjal

S&F in replacement of Fan Regulator socket type Make- Anchor /Plaza/Kinjal

Insulation Tape 20Mtr length

Dismantling of Old unserviceable copper cable 1.5 / 4 Sqmm

S&F in replacement PVC copper cable 1.5 sqmm 180 RM length Make- Anchor

S&F in replacemnt PVC copper cable 2.5 sqmm 180 RM Length Make- Anchor

S&F in replacement PVC flexible twin core 1.5 Sqmm copper cable 45 RM Length Make- Anchor

Dismantling of Old unserviceable Service cable 6/10 Sqmm

S&F in replacement Service cable PVC aluminium straned conductor cable 2 core 6 sqmm 100 rm length

S&F in replacement Service cable PVC aluminium straned conductor cable 2 core 10 sqmm 100 rm length

PRAGATHI BUILDERS