General Fund 2023-24 Improvement of Community Hall at Ward No. 7, Mathiyalagan Nagar in Sulur Town Panchayat, Coimbatore District

Amount

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC slabs, Rectanular beams, Lintels and Stair case waist slabs conopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over country wood joists of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed by departmental Engineers.

Beams and slab First floor

B. Columns

Supplying, fabricating and placing in position mild steel/Ribbed for steel roads for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specifications.

Reinforced Cement Concrete 1: 1 1/2: 3 ( one cement, one and half sand and three aggregate) mix using machine crushed / hand broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding centering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherver necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers.

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

A.First Floor

Special Ceiling Plastering and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, conopies, staircase steps , etc., with cement mortar 1:3 (one cement three sand) mix to 10mm thick and including hacking the surfaces and providing necessary cement mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standard specifications.

Plasteringwith cement mortar 1:5 (one cement three sand) mix to 12mm thick and including hacking the surfaces and providing necessary cement mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standard specifications.

Dadooing of walls with colour glazed tiles of size 300x200x6 mm finished thickness with c.m 1:2- and polished with same color cement including all cost and convene of all materials etc.,complete

Paving the floor with vitirified tiles size 600 x 600 x 8mm of approved quality and colour of any size in all floors over 20mm thick cment mortar 1:3 (one cement and three sand) mix base above the existing bed concrete and pointing with same colour cement added with colouring pigments etc., complete complying with standard specification.

Supplying and fixing in position best white glazed earthenware Indian water Closet of approved quality of size 580mm x 440mm. with 'P' or 'S' trap and embedding the closet with trap to shape in position with 40mm brick jelly concrete 1:2:5( one lime ,two sand and five brick jelly) and finishing the top to the required slope and including giving connection to the C.I. soil stracks by dismantling the masonry floor or RCC works and redoing the same to the original condition without anyleakage etc., complete as directed by the departmental officers, ( The water closet should be got approved by the Department Officers before use on work).

Supply and fixing of PVC panelled door with frame shutters hollow type 200mm x 20mm panels with 1mm wall thickness for panels and styles and rails of suitable size with 2mm wall thickness suitabley reinforced using MS angle/ Flat including cost of necessary aluminium hinges and other furniture fittings with frame etc.,complete.,

Supply and Delivery of MS doors and Windows with Outer frame and Shutter frame in MS angle of size 40mmx40mmx6mm with MS flat 25mmx25mmx6mm and Ms sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamelpaint over one coat of red oxide including cost of angles, plates,sheets , fabrication charges, cost of hold fast and transportatiion charges etc.,complete

Supplying and fixing in position of Steel windows in position including labour charges for fixing furniture fittings for windows with standard drawings , etc., complete complying with standard specifications.

Supplying and fixing of push and pull type Rolling shutter confirming to IS 6248/1979 and as amended from time to time. With ISI make of approved size and section using 18 gauge G.I.sheet.The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of Hood covers , transportation charges etc., and as directed by Engineer incharge.

Supplying and fixing in position of Steel Ventilatore in position including labour charges for fixing furniture fittings for Ventilatore with standard drawings , etc., complete complying with standard specifications.

Supply, and fixing of Galvalum sheet ( pre painted )6mm thick including 15 cm lapping necessary 'J' bolt and nut ,bitumen washer and screws if wooden baterns including cost and conveyance of all materials and labour charges etc complete complying with standard specifications

Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Wring with 2 x 1.5 sq.mm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5A F.T. switch in flush wall with 3mm Tk hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light Point.(SD.NO:24)

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW box. Plug point( SD 136 )

Supply and fixing of single box type 4"40W flu fittiing complete with copper choke and condensor with TW round blocks on wall or ceiling with PVC unshealthed copper leads from terminals to the fitting. (S.D.88)

Supply and fixing of WT bulk head fitting with guard (phillips/Bajaj/Crompton/K.Life) suitable for lamp with 11 W CFL bulb.(SD .83)

Supply and fixing of 1400 mm (56") /sweep AC ceiling fan complete with stepped 300W regulator, with the existing down rod on the existing clamps.(SD 108)

Supply and fixing of 16A D P switch with metal clad of 500V with fuse and neutral (sidehandle) on suitable Twbox PWD earthing SD 141

Supply and fixing of horizontal type 4way triplepole neutral MCB distribution board in sheet steel enclosure doubledoor (metal) with 40A 4pole MCB isolateras incoming and 12Nos.6A to 32ASPMCB as out going in flush with wall and making good of the concealed portion with earth connection.The MCB DB and MCB' s should be with the ISI mark (like standard make) SD 179

Painting iron works for doors, windows and ventilators, iron bars, weldmesh, wiremesh screen, steel bars , flats and other similar works etc., with Two coats of approved first quality of synthetic enamel paint over the existing red oxide primer in all floors it inclusive of cost of materials and labour, brushes and scaffolding etc., complete complying with standard specifications.

Emulsion paint two coats using best approved colour and quality cement paint in all floors including cost of lime and other materials, brushes, scafolding charges etc., complete complying with standard specifications and as directed by departmental officers.

KSK CONSTRUCTIONS