Loading
Loading…
Loading…
Tender Value
₹20.3 Cr
EMD Value
₹11.6 L
Closing Date
31 Mar 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
S AND T
14 conditions · 2 needing a document upload
Financial Eligibility Criteria ( para 10.2 of GCC 2022 )The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Ref:GOI, Ministry of Railways, Railway Board, New Delhi. Advance Correction Slip No.1 of IRGCC ,April 2022 Lr.No.2022/CE- I/CT/GCC-2022/Policy Dt:14.07.2022 )
Technical Eligibility Criteria ( 10.1 part 1 of GCC 2022) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be sub letted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Definition of Similar Nature of work : Execution of Panel Interlocking or Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Alteration to Existing Panel Interlocking /Electronic Interlocking with MACLS either Indoor or Outdoor works or Both. OR Provision of IBS works in panel Interlocking or Electronic Interlocking sections. OR Provision of Automatic signalling with Axle counter/Track circuits or both together. OR Provision of UFSBI/BPACs/Digital Axle counters at Panel Interlocking stations/Electronic interlocking stations.
15 conditions · 7 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/We have visited the works site and I/ We am/ are aware of the site conditions and IRGCC 2022,Correction slips of the GCC.
1. Signalling arrangements at byepass cabin and at Parli station in connection with proposed byepass cabin at Parli station for connecting Latur Road-Parli vaidyanath & Parli vaidyanath- Parbhani Main lines. 2. Signalling arrangements at Y connection cabin and at Laturu Road station in connection with proposed Y connection at Latur Road station for connecting Latur Road-Parli vaidyanath & Laturu Road - Kurudwadi Main lines. 3. Signaling arrangements at proposed new crossing station between KMNR-UDGR stations.
C_SG_36_595
C_SG_36_595
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹11.6 L
31 Mar 2026
10 Mar 2026
17 Mar 2026
280 items across 5 schedules · ₹13,65,57,045.44 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of GKP type Location Boxes Full size as per drg. No. S&T/MFT/2378 (Single) (To be inspected by RITES) | Numbers | 180.00 | 16,216 | 29,18,880 |
| 2 | Supply of GKP type Location Boxes Half size drg. No. S&T/MFT/T.2378 (To be Inspected by RITES) | Numbers | 70.00 | 8,083 | 5,65,810 |
| 3 | Supply of Universal Locks with one steel key for every ten locks or part there of (Forexample, if locks ordered is 10,1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19).(To be Inspected by Consignee) | Numbers | 440.00 | 195 | 85,800 |
| 4 | Supply of relay fixing frame for Full location box, the frame should be made out MS angle of 25mm X 25mm X 3mm and approximate size of 940mm X 150mm with suitable holes to fix the same in the box.(To be Inspected by Consignee)) | Numbers | 100.00 | 853 | 85,300 |
| 5 | Supply of relay fixing frame for half location box. The frame should be of approximate size 470mmx150mm and made out with powder coated MS angle of 25mmx25mmx3mm. The frame should have suitable holes to fix in half location box.(To be Inspected by Consignee) | Numbers | 22.00 | 427 | 9,394 |
| 6 | Supply of CLS post 140mm dia 3.5 Mtr.long to Specn.No.IRS-S/6-81 or latest (To be Inspected by RITES) | Numbers | 24.00 | 4,442 | 1,06,608 |
| 7 | Supply of CLS ladder set of 3.5 Metre long complete with staging, supports, signal number plate, cast iron ladder base to suite 3.5 mtr post ,as per drg.no.SA.23153.S.2033. or latest(To be Inspected by RITES) | Numbers | 24.00 | 5,226 | 1,25,424 |
| 8 | Supply of CLS post 140mm dia 4.5 Mtr.long to Specn.No.IRS-S-6.81 or latest (To be Inspected by RITES) | Numbers | 44.00 | 4,710 | 2,07,240 |
| 9 | Supply of CLS ladder set of 4.5 Metre long complete with staging, supports, signal number plate, cast iron ladder base to suite 3.5 mtr post ,as per drg.no.SA.23153.S.2033. or latest (To be Inspected by RITES) | Numbers | 44.00 | 6,432 | 2,83,008 |
| 10 | Supply of Surface base of 140mm dia to suit signal post as per Drg.No.S-2011/M. or latest(To be Inspected by RITES) | Numbers | 68.00 | 3,476 | 2,36,368 |
| 11 | Supply of Colour Light Signal Unit - 2 Aspect complete to Drg.No.SA 23003/A/M with Spec IRS.S 26-64 latest amendment.32Nos32681 (To be Inspected by RITES) | Numbers | 32.00 | 32,681 | 10,45,792 |
| 12 | Supply of Colour Light Signal Unit - 3 Aspect complete as per DRG. No. SA 23002/AIM with Latest amendment(To be Inspected by RITES) | Numbers | 30.00 | 35,227 | 10,56,810 |
| 13 | Supply of Offset Bracket to suit 140mm dia CLS post with two numbers of U bolts and nuts complete.16Nos4938 (To be Inspected By RITES) | Numbers | 16.00 | 4,938 | 79,008 |
| 14 | Supply of Post type position light shunt signal with hoods, arrow mark and offset bracket to suit 90mm sockets (CLS) with two numbers of 'U' bolts and nuts complete to fix shunt signal below main stop signal as per ROSO DRG. No. SA 23840 or latest (To be Inspected by RITES) | Numbers | 42.00 | 3,502 | 1,47,084 |
| 15 | "Supply of Junction type / Direction type route indicator as per specification IRS:S 66-84 Amd. 1 or latest. One way to drawing no.SA.23404"(To be Inspected by RITES) | Numbers | 2.00 | 15,187 | 30,374 |
| 16 | Supply of Route Indicator Jn. Type 2 Way complete to specification .No.IRS-S-66/84 amendment No.1&to Drg.No.SA 23402,with hoods or Latest(To be Inspected by RITES) | Numbers | 14.00 | 20,490 | 2,86,860 |
| 17 | "Supply of Junction type / Direction type route indicator as per specification IRS:S 66-84 Amd. 1 or latest. Three way as per DRG. No. SA 23403"(To be Inspected by RITES) | Numbers | 2.00 | 24,051 | 48,102 |
| 18 | Supply of Ground type position light shunt signal complete with base, pipe, arrow mark and hoods as per RDSO ORG. No. SA 23840 or latest.(To be Inspected by RITES) | Numbers | 10.00 | 6,083 | 60,830 |
| 19 | Supply of Insulations for the Ground connection for Pt. Machine COMPRISING OF Switch extension piece insulation - 1 set(Each set comprising of S-3265-1 No,S- 3266-1 No,S-23199-2 Nosand S-8640- 4Nos). Stretcher bar insulation - 3 sets(Each set consisting of T-10367-1No.T- 10368-2Nos.T-10371-4Nos.), Gage Tie plate insulations - 4 sets(Each set consisting of T-10372-1No,T-10368- 3Nos.and T-10371-6Nos.), Drive Lug insulation -1 set (each set consisting of S- 8804-1No.S-8813-2.and S-8640-4 Nos)complete with Bushes. Note : The type of insulation required will be specified by engineer incharge of the work depending on the type of machine proposed.(Universal/ PTJ Make) as per spec.(To be Inspected by CONSIGNEE) | Set | 36.00 | 2,203 | 79,308 |
| 20 | Ground connections for universal point machine143 mm with 'D' type clamp for 52kg/ 60kg/ 90R rail as per Org. No. RDSO/S3267-74(To be Inspected by CONSIGNEE) | Set | 36.00 | 8,670 | 3,12,120 |
| 21 | Insulations for D' clamp switch extension bracket to suit to universal point machine as per drawing RDSO/S3361-62 supplied by railways. One set consists of D' clamp insulation-2nos, Nylon insulation bushes- 4nos., and Nylon insulation washers- 8Nos.)(To be Inspected by CONSIGNEE) | Set | 36.00 | 729 | 26,244 |
| 22 | Drive lug insulation for universal point machine as per drawing RDSO/ S 3361-62 (One set consists of one number central insulation plate, bushes-2 no's and washer-4 Nos.) (To be Inspected by CONSIGNEE) | Set | 36.00 | 160 | 5,760 |
| 23 | Supply of GI termination box (10 SWG) for point machine of size 45 cmx23 cmxl2 cm with double coat of enamel paint (outside: Black & inside: white) along with 2no's of MS angle of size 50x50x6mm of length 1000mm each, 2 numbers of 40mm GI pipe of length 450 mm & 150 mm with nuts/ bwashers and teak wood plank of size 40 mmx25 mm for fixing of terminals. (To be Inspected by CONSIGNEE) | Numbers | 36.00 | 2,902 | 1,04,472 |
| 24 | Supply of Track feed battery charger to work on 11OV AC for charging br 2 or 3 014 lead acid cell of 8OAH (1 DAmps) used in track circuit as per RDSO Specn. No. IRS.S.89/2013 Ver 1.0 latest.(To be Inspected by RDSO) | Numbers | 104.00 | 8,294 | 8,62,576 |
| 25 | Supply of Track Feed Regulating Resistance disk type 00 to 300 as per ORG. No. SA 20161 66/M or latest. To be procured from RDSO approved firms.(To be Inspected by RDSO) | Numbers | 104.00 | 358 | 37,232 |
| 26 | Supply of B type chokes to specification no.IRS-S.65/83 to amendment no.2 or latest for RE Track circuit.(To be Inspected by RDSO) | Numbers | 208.00 | 2,313 | 4,81,104 |
| 27 | Supply of Track lead junction boxes fibre glass as per DRG.No.CWM-00597 of F.R.P material to and specification IRS:S 23 along with fixtures i.e., one MS angle 50mmx50mmx5mm, 0.9m long, two numbers of G.l pipes of 25 mm dia, 500 mm long along with nuts and bolts and 500 mm long (grommet bushes, 60 mm ARA terminals-2 No's).(To be Inspected by RITES) | Numbers | 1040.00 | 1,546 | 16,07,840 |
| 28 | "Supply of Electric Track Drilling machine shall be suitable for operating on 110V, 50Hz AC / DC fully insulated and no-load RPM shall be 1900 / 1000 and the power input is 550W. Machine with suitable inter changeable track mounting stand and drilling to be designed with adjustable facility and along with a set of 20 no's of 7.2 mm dia Bosch MSS drill bit, Drill check dia. 13 mm and drilling dia in steel 8 mm/13 mm along with packing accessories."(To be Inspected by CONSIGNEE) | Numbers | 5.00 | 22,602 | 1,13,010 |
| 29 | Supply of Channel bond pins 7mm dia single grove as per RDSO Drg.No.S- 69/M.&IRS S17-75 amendment No.1 (To be Inspected by CONSIGNEE) | Numbers | 20000.00 | 3 | 60,000 |
| 30 | Supply of titanum coated 7.2mm drill bits of Bosch/Addision make (To be Inspected by Consignee) | Numbers | 400.00 | 146 | 58,400 |
| 31 | Supply of Single Section Digital Axle Counter (SSDAC) asper specification No. RDSO/SPN/177/2012 Ver. 3.0 or latest within built event logger card.(To be Inspected by RDSO) | Set | 28.00 | 6,74,335 | 1,88,81,380 |
| 32 | Supply of Transformer - Rectifier as per specification IRS: S 91-2014 Ver. 1.0 or latest.Transformer-rectifier set with 110V AC input, 24V-30V DC output, 1A.(To be Inspected by RDSO) | Numbers | 8.00 | 19,740 | 1,57,920 |
| 33 | Supply of Transformer-rectifier set with 230V AC input, 24V-30V DC output, 5A.(To be Inspected by RDSO) | Numbers | 8.00 | 25,960 | 2,07,680 |
| 34 | Supply of Battery Charger 230V AC /110V DC 30 Amps single phase ,signalling/Telecom instrument as per RDSO Specification No.IRS.S.86- 2000.amdt No.1 or latest To be procured from RDSO approved firms(To be Inspected by RDSO) | Numbers | 4.00 | 1,10,464 | 4,41,856 |
| 35 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable) QNA1- 8F/8B, Interlocking Code: ABDGH as per Spec BRS 931 A or Latest(To be Inspected by RDSO) | Numbers | 200.00 | 4,738 | 9,47,600 |
| 36 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable)QNA1-12F/4B, DC Neutral Line Relay, Interlocking Code: ABDFH as per Spec BRS 931 A or Latest(To be Inspected by RDSO) | Numbers | 200.00 | 4,413 | 8,82,600 |
| 37 | Supply of AC immune, plug-in type, Style 'QTA2', 2F/1B DC Neutral track relay for railway signalling track circuits with coil resistance 9 ohm, complete with plug board, retaining clip and connectors as per specifications: BRS 939A & 966 or Latest, IRS:S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable) with interlocking code FGHKX (To be Inspected by RDSO) | Numbers | 104.00 | 4,806 | 4,99,824 |
| 38 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable) QSPA1- 8F/4B, The interlocking code: ABDEJ, Spec BRS 933A or latest.(To be Inspected by RDSO) | Numbers | 104.00 | 6,465 | 6,72,360 |
| 39 | Supply of 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable) QNA1K-6F/6B, Interlocking Code: CDEKY as per Spec BRS 931 A or Latest and RDSO letter No.STS/E/Relays/UEA (PI) dated 30/05/97 (Annexure-II).(To be Inspected by RDSO) | Numbers | 80.00 | 5,062 | 4,04,960 |
| 40 | Supply of ECR 4F/4B' for 110V AC lit LED signals, complete with plug board, retaining clip and connectors as per RDSO specification No.STS/E/Relays/AC Lit LED Signal/09-2002 Amd. 1 or latest, BRS 941A, IRS: S 23-88 Amd. 1 or latest, IRS: S34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). The interlocking code for this unit shall be ABDHK (with ATC clips) (To be Inspected by RDSO) | Numbers | 40.00 | 5,841 | 2,33,640 |
| 41 | Supply of PVC insulated Wire Coils Multi- strand, single core, copper conductor 16/0.2 (16 wires, diameter of each wire is 0.20mm) (0.5sq.mm) wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour of coil to be specified by Engineer in charge.(To be Inspected by RDSO/RITES)(Units Per Coil) | Numbers | 400.00 | 1,153 | 4,61,200 |
| 42 | Supply of PVC insulated wire, Multi-strand, single core, copper conductor 28/0.3 (28 wires, diameter of each wire 0.30mm) flexible wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour to be specified by Engineer in charge.(Units Per Coil)(To be Inspected by RDSO/RITES) | Numbers | 96.00 | 2,908 | 2,79,168 |
| 43 | Supply of Supply of 10 Sq.mm PVC insulated, multi-strand, single core, copper conductor 140/0.3 (140 wires, diameter of conductor 0.3mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil.(To be Inspected by RDSO/RITES) | Metre | 4000.00 | 124 | 4,96,000 |
| 44 | Supply of 35 Sq.mm PVC insulated multi- strand, single core, copper conductor 277/0.4 (277 wires, diameter of each wire is 0.4mm) cable as per IS:694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100-meter coil. Colour: Green(To be Inspected by RDSO/RITES) | Metre | 400.00 | 391 | 1,56,400 |
| 45 | Supply of 16 Sq.mm PVC insulated, multi- stand, single core, copper conductor 127/0.4 (127 wires, diameter of each wire is 0.4mm) cable as per IS: 694 or latest, IRS: S 76-89 Amd. 3 or latest. Cable to be supplied in 100 meter coil. Colour: Green(To be Inspected by RDSO/RITES) | Metre | 400.00 | 178 | 71,200 |
| 46 | Supply of non-deteriorating type of fuse holders 240V AC/DC as per specification IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A) Fuse holder 20A capacity (To be Inspected by RDSO) | Numbers | 2000.00 | 220 | 4,40,000 |
| 47 | Supply of non-deteriorating type of fuse links 240V AC/DC as per specification IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A)Fuse link 1A / 2A / 6A / 10A / 16A / 20A as specified by Engineer In charge.(To be Inspected by RDSO) | Numbers | 6000.00 | 31 | 1,86,000 |
| 48 | Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre to centre) as per RDSO DRG. No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest.(To be Inspected by RDSO) | Numbers | 1800.00 | 406 | 7,30,800 |
| 49 | Terminal block: 1 way Poly butylene Terephthalate (PBT) of size 60mm (link centre to centre) as per RDSO DRG. No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747/Alt.5 and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest.(To be Inspected by RDSO) | Numbers | 6000.00 | 97 | 5,82,000 |
| 50 | "Supply of modular terminal block (WAGO or similar) as per RDSO specification RDSO/SPN/189/2004 Ver. 3.0 or latest consisting the following parts: a) 2 conductor disconnect terminal block - 6 numbers b) End / intermediate plate suitable for 2 conductor disconnect terminal - 1 number c) Screw less end stop similar to WAGO Model No. 249-117 - 2 numbers d) Insulated jumper WAGO Model 280-402 - 5 numbers e) Din Rail - 0.1 metre per set (in length of 1 metre for every ten set)(To be Inspected by RDSO/RITES) | Numbers | 1000.00 | 703 | 7,03,000 |
| 51 | Supply of mini WSB markers for modular terminals WAGO Model No. or similar - 100 Nos.(To be Inspected by Consignee) | Set | 16.00 | 64 | 1,024 |
| 52 | Supply of powder coated Relay rack universal type 1 Way as per DRG. No. S&T/MFT/291. The relay rack shall be supplied with scaffolding, stainless steel nuts and bolts for fixing the rack, supporting angles, frame mounting triangle base with 'J' bolts, insulation of required numbers and suitable inner frames to suit Q style relays / K50 pre wired tag blocks.(To be Inspected by Consignee) | Numbers | 16.00 | 7,474 | 1,19,584 |
| 53 | Supply of hylam sheet, resin bonded, 6mm thick ,grade P3, to IS specification IS: 2036 of 1974 or latest and size 2400mm X 1200mm of colour approved by the site in- charge. (To be Inspected by Consignee) | Numbers | 20.00 | 7,124 | 1,42,480 |
| 54 | Supply of hylam sheet, resin bonded, 6mm thick, grade P3, to IS specification IS: 2036 of 1974 or latest and size 2400mm X 600mm of colour approved by the site in- charge (To be Inspected by Consignee) | Numbers | 20.00 | 3,430 | 68,600 |
| 55 | Supply of hylam , resin bonded, 3 mm thick, grade P3, to IS Specification IS: 2036 of 1974 or latest and size 2400mmX600mm of colour approved by site in-charge.(To be Inspected by Consignee) | Numbers | 20.00 | 1,888 | 37,760 |
| 56 | "Supply of basic material to construct unit Maintenance Free Earth as per specification RDSO/SPN/197 Ver. 1.0 or latest consisting of the following: a) Copper bonded steel electrode 3m long, 17mm diameter with copper bonding thickness mini 250 micron and UL listed and marked - 1 No. b) Earth enhancement compound of RDSO approved brand supplied in sealed bags of minimum 10kg - 3 Nos. c) Copper strip with dimensions 150 x 25 x 6mm to terminate earth rod - 1 No. d) Copper strip with dimensions 300 x 25 x 6mm Main Equi- potential Earth Bus bar (MEEB) - 1 No. e) Copper strip of with dimensions 150 x 25 x 6mm Sub Equi- potential Earth Bus bar (SEEB) - 1 No. f) 35 Sq.mm multi-strand PVC insulated Copper Cable (15 meter). "(To be Inspected by RDSO/RITES) | Set | 40.00 | 16,837 | 6,73,480 |
| 57 | "Supply of Data Logger of following capacity for remote monitoring of signalling parameters and power supply arrangements with network as per specification IRS: S 99- 2006 Amd. 3 or latest with 64 input digital card as a spare and fuse monitoring PCBs for monitoring at least fifty 2A fuses with inbuilt modem cards for networking. Data Logger with 512 digital inputs and 32 analog inputs." (To be Inspected by RDSO) | Set | 4.00 | 4,97,388 | 19,89,552 |
| 58 | Supply of Protocol Converter for Electronic Interlocking including software required for networking.(To be Inspected by RDSO) | Numbers | 4.00 | 49,373 | 1,97,492 |
| 59 | Supply of Safety Point Alarm unit to alert ASM to set the points against the blocked line.4(To be Inspected by Consignee) | Numbers | 4.00 | 69,582 | 2,78,328 |
| 60 | Supply of 80 column Dot Matrix Printer Model No. Epson LQ300/LX300 or similar with serial port.(To be Inspected by Consignee) | Numbers | 4.00 | 13,177 | 52,708 |
| 61 | Supply of Printer for maintenance terminal at station - HP LaserJet 1020 Plus or similar.(To be Inspected by Consignee) | Numbers | 4.00 | 16,135 | 64,540 |
| 62 | "Supply of Earth Leakage Detector (ELD) with configuration specified by Engineer In charge and as per specification RDSO/SPN/256/2002 or latest with insulated tester, test probes, Mounting stand and Fuse board to isolate from distribution board as per requirement of channels. 12 channel Earth Leakage Detector."(To be Inspected by RDSO) | Numbers | 4.00 | 1,90,261 | 7,61,044 |
| 63 | Automatic media changeover of Modems working on redundant channels for data transmission on OFC/Quad compatible with existing UFSBI(To be Inspected by Consignee) | Pair | 4.00 | 35,326 | 1,41,304 |
| 64 | Supply of MODEM compatible with existing UFSBI system to work on backup media (either VF-channel on OFC P/Mux or 2 MBPS El channel from STM or direct dark single mode 1- Core, optic fiber cable up to 30 Km distance). The required type must be mentioned while ordering.(To be Inspected by RDSO) | Pair | 4.00 | 78,970 | 3,15,880 |
| 65 | Supply of 50mm x 6mm GI tape for interconnecting earth electrodes.(To be Inspected by Consignee) | Metre | 1000.00 | 546 | 5,46,000 |
| 66 | Supply and wiring of Polymeric Positive Temperature Co- Efficient Device self resetting type (PPTC) of 2A rating suitable for railway applications of reputed make. The PPTC fuse shall be wired by soldering suitable flexible wire on both ends (all material except flexible wire has to be arranged by contractor).(To be Inspected by Consignee) | Numbers | 800.00 | 87 | 69,600 |
| 67 | Supply and fixing of Fire Extinguisher CO2 type (Capacity 4.5 KG)(To be Inspected by Consignee) | Numbers | 16.00 | 8,171 | 1,30,736 |
| 68 | Supply of Cable Route locator consisting of Cable Avoidance Tool XD(ST CAT 33XD),SGV Signal Generator(ST-SGV33) and Signal Clamp Accessory(ST-SC) in a carrying bag (ST-CB) .(To be Inspected by Consignee) | Numbers | 4.00 | 3,77,600 | 15,10,400 |
| 69 | "Supply of Tool Kit as under - 1. Standard Tool Bag (CANAVAS) - 1 No. 2. Soldering Iron (Make Soldern / Philips) - 60W / 230V - 1 No. 3. Digital Multimeter - True RMS Meter (Philips / Fluke / Rishabh Rish 18S) Upto 20M, 10A, 5kHz, 2mV to 750V AC, 200V DC - 1 No. 4. Screw Driver set of 6 pieces (Taparia Make) - 1 No. 5. Cutting plier 6" (Taparia Make) - 1 No. 6. Side Cutter (Wire cutter) 6" (Taparia Make) - 1 No. 7. Nose plier 6" (Taparia Make) - 1 No. 8. Wire stripper (Taparia Make) - 1 No. 9. Fiber tape 3m length - 1 No. 10. Scale 6" (for measuring tongue rail opening) - 1 No. (Transparent Plastic Material) 11. Pop spanner wrench 6mm to 22mm (Auto adjustable spanner) of Taparia make - 1 No. 12. Pop spanner wrench 10 mm to 30 mm (Auto adjustable spanner) of Taparia make - 1 No. 13. Pop spanner wrench 15mm to 41mm (Auto adjustable spanner) of Taparia make - 1 No. " (15) Hammer 3.0 LBs with handle -1Nos (16) Chisel 5'' (For cutting bond wire --1Nos) (17)Poker 8'' (for removing bond wire and bond pins) - 1Nos (18) Screw driver Heavy duty 12'' with plastic handle (For opening of dection contacts (Taparia) - 1 Nos (19) Test piece (PB wedge piece) - 2 Nos (20) high power torch light -1Nos (21) Universal Key Steel - - 2 Nos (22) Insulated Box Spanner for 6 Way terminals (13mm) for opening ARA terminals-- 1Nos) (23) nylon brush --1 Nos (24)Sealing plier ---1Nos ( 2 5 ) Crimping Tools (1.5 to 16sq mm ) - 1Nos (26) 11 nos Feeler Guage --1Set (27) TSR Meter (For testing condition of track circut) --1Nos (28)Wooden Block (60mm X 60mm )for providing between toung rail & stock rail during mainteance--1Nos (29) Track Shorting clips --1 Nos (30) Tester-1 No (31) Flat file 12 '' length X 1''Width -1 Nos (32) Insulated Spanner Set 6mm-20mm ten nos (To be Inspected by Consignee) | Set | 4.00 | 46,332 | 1,85,328 |
| 70 | Supply of Feather lite table of Model No. V- MT 1890 & V- 2D 1F or similar12No29573 (To be Inspected by Consignee) | Numbers | 12.00 | 29,573 | 3,54,876 |
| 71 | Supply of steel stools 18 inches height neatly finished and painted.(To be Inspected by Consignee) | Numbers | 32.00 | 489 | 15,648 |
| 72 | Supply of Fibre table of 4 Feet x 2 Feet one number and fibre chairs two numbers. They should be of standard make and quality like Neelkamal or Similar.(To be Inspected by Consignee) | Set | 12.00 | 2,099 | 25,188 |
| 73 | Supply of Godrej PCH 5002T model or similar(To be Inspected by Consignee) | Numbers | 12.00 | 10,671 | 1,28,052 |
| 74 | Supply of Double key lock for relay room. (To be Inspected by Consignee) | Numbers | 16.00 | 1,233 | 19,728 |
| 75 | Supply of Godrej shelf storage of 916 x 486 x 1981 mm or similar(To be Inspected by Consignee) | Numbers | 16.00 | 26,479 | 4,23,664 |
| 76 | Supply of HDPE jerry can of 20 litres capacity. The jerry can shall be supplied at site as per the requirement of site in- charge.(To be Inspected by Consignee) | Numbers | 16.00 | 154 | 2,464 |
| 77 | Supply of Godrej Navtal Locks with diameter of 50mm with 3 keys.(To be Inspected by Consignee) | Numbers | 80.00 | 563 | 45,040 |
| 78 | Printing, Binding & supply of registers with latest proforma given by in-charge officer each register of 100 pages..(Units Per Register)(To be Inspected by Consignee) | Numbers | 320.00 | 358 | 1,14,560 |
| 79 | Supply of Electrostatic Rubber Matting of thickness 2mm as per IS-15652/2006 with suitable adhesive material.(To be Inspected by Consignee) | Sqm | 160.00 | 2,390 | 3,82,400 |
| 80 | Supply of key chains with ring and plastic name plate of dimensions 60mm x 20mm x 3mm. The plastic name plate shall be engraved with station name on one side and key particulars on the other as specified by the site in-charge.(To be Inspected by Consignee) | Numbers | 110.00 | 34 | 3,740 |
| 81 | Desk type 2 wire, 12 way DTMF selective calling group telephone (Selective Calling / Group Telephone) complete as per specification IRS: TC 80-2000 Amd. 1 or latest with suitable power supply unit.(To be Inspected by Consignee) | Numbers | 28.00 | 6,282 | 1,75,896 |
| 82 | Supply of Thermo shrinkable jointing kit suitable for loading coil joint/condenser joint/derivation joint for 6 quad cable with transformers using thermoshrinkable.as per RDSO Spec.No.IRS.TC.77-2006(rev-1) wiith Amdt.1 or latest.(To be Inspected by RDSO) | Numbers | 200.00 | 3,715 | 7,43,000 |
| 83 | Supply of emergency socket box made of FRP material to RDSO spec TC/44/2002 ver-2 or latest to be supplied by RDSO approved vendors. (To be Inspected by RDSO/RITES) | Numbers | 120.00 | 5,195 | 6,23,400 |
| 84 | Supply of 10pair PVC switch board cable twisted in pairs PVC sheathed copper conductor 0.5mm dia (Delton/Krishna udyog or similar) and laying/drawing the cable in the PVC casing/PVC pipe(To be Inspected by Consignee) | Metre | 2000.00 | 35 | 70,000 |
| 85 | Supply of 20pair PVC switch board cable twisted in pairs PVC sheathed copper conductor 0.5mm dia (delton/krishna udyog or similar) and laying/drawing the cable in the PVC casing/PVC pipe.(To be Inspected by Consignee) | Metre | 2000.00 | 88 | 1,76,000 |
| 86 | Supply of 10 pair cable termination box of WAGO make:containing part no:280- 870(20nos),280-374(1 nos),249-116(2 nos),210-229/pw11-0000(1nos) and metallic box for out door use with locking facility(1nos)(To be Inspected by Consignee) | Numbers | 40.00 | 1,817 | 72,680 |
| 87 | Supply of 20 pair cable termination box. make: WAGO: containing part no:280- 870(40 nos),280-374(1nos),249- 116(2nos),210-229/PW11-0000(1nos) and Box(1nos).(To be Inspected by Consignee) | Numbers | 40.00 | 3,240 | 1,29,600 |
| 88 | Supply of Push Button Telephone with CLIP facility with a) Volume control, b )Incoming & outgoing call memory, c) music on hold, d) selectable ringer melodies. Make : BEETEL, Model : M77 or similar(To be Inspected by Consignee) | Numbers | 20.00 | 1,495 | 29,900 |
| 89 | Supply and installation of 12V / 100 AH maintenance free batteries as per RDSO Specification No. IRS:S - 93/96(A). Make AMAR RAJA / HBL NIFE. Should be supplied by a RDSO approved firm.(To be Inspected by Consignee) | Numbers | 20.00 | 11,167 | 2,23,340 |
| 90 | Supply of 42U floor standing rack with width 600mm, depth 650mm. Specifications: 90 CFM AC 220V fans-2 Nos, Vertical power manager 5 Amps X 12 Socket with miniature circuit breaker-1, Horizontal cable manager clamp type 1U size - 1 No, Vertical cable manager clamp type 1 No, Heavy duty tray with full depth - 5 Nos, Earth strip copper 2-3 mm X 482 mm -1 No, Hardware for mounting pack of 20 -1 No, Make: HCL, VALRACK / Basenet. Note: Front section with glass door and lock facility.(To be Inspected by Consignee) | Numbers | 4.00 | 41,962 | 1,67,848 |
| 91 | Blowing of armoured optic fibre cable (OFC Cable supplied by Railways) into the duct supplied vide other NS item of supply portion by using blowing machine and associated works. 10% of OFC length to be blown extra on both ends of Duct i.e. total 20% of Duct length. Before blowing the duct integrity shall be tested. If any defect is found during duct integrity test, the entire length of HDPE duct from one chamber to another chamber is to be replaced by the contractor at his own cost. Payment will be made as per the length of Duct from which OFC is Blown.(To be Inspected by Consignee) | Kilometre | 16.00 | 10,956 | 1,75,296 |
| 92 | Laying of HDPE duct in trenches. Supply and pulling of nylon rope through it.(To be Inspected by Consignee) | Kilometre | 16.00 | 7,410 | 1,18,560 |
| 93 | Supply of Optical fiber splicing ( joint ) enclosure (24F) for loose tube complete with all accessories as required.(To be Inspected by Consignee) | Numbers | 80.00 | 9,398 | 7,51,840 |
| 94 | Supply of 24F SC FDMS Complete set rack mounted 24F FMS fiber part no.fms-1u 24FS 24FP Raychem make including 24Nos 0.2db FC/PC adaptors and 24numbers 900 micron 1.5 meter FCPC pigtails. RDSO Spec No.: RDSO/ SPN/TC- 037-2000 (Ver.3) or latest.(To be Inspected by Consignee) | Numbers | 20.00 | 23,712 | 4,74,240 |
| 95 | "Supply of TEJAS 1400 STM-1 SDH equipment with following cards and fully wired for all e1s (i) XA-20G card - 2 nos (ii) 63 e1 card -1 nos (iii) PSU cards (DP -23) - 2 nos (iv) CEL-1 for ethernet"(To be Inspected by RDSO) | Numbers | 4.00 | 3,11,694 | 12,46,776 |
| 96 | Supply of HDPE telecom duct with outer diameter of 40mm and inner diameter of 33mm permanently lubricated as per specification TEC GR No.G/CDS-08/02,NOV 2004 or latest . HDPE pipe shall be supplied along with 4mm dia polypropylene rope of approved quality inside wherever required. The length of HDPE telecom duct should be 1 KM. End plugs to be provided along with drum (free of cost) (2 No. per Km.).(To be Inspected by RITES) | Kilometre | 16.00 | 66,223 | 10,59,568 |
| Schedule total | ₹5,36,01,490 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ListofAnnexures.pdf
ATTACHMENT
SpecialConditionsofContractforBYPASSPARLIANDLATURT.NO.595.pdf
ATTACHMENT
MAKEININDIA1_compressed1.pdf
ATTACHMENT
MAKEININDIA2.pdf
ATTACHMENT
DRAWINGS.pdf
ATTACHMENT
Correctionslips.pdf
ATTACHMENT
GCC_April-2022__1.pdf
ATTACHMENT
Tele_Cir_9-2023.pdf
ATTACHMENT
SIPPARLIVAIJANTHIPU.1424B_SRDSTE-SC_P7.pdf
ATTACHMENT
NEWXINGSTNBETKMNR-UDGR.pdf
ATTACHMENT
Technical_SpecificationsT.NO.595.pdf
ATTACHMENT
LaturRoadByepassLine-Model.pdf
ATTACHMENT
MasterTenderDocumentT.NO.595.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .