REPAIR AND MAINT OF BLDGS OF WCLU 42 MVH KOI SPORTS COMPLEX STN HQ 876 AT COY STN WKSP FD WKSP, DDGSI PNR COY AGE BR I AT CHANDIMANDIR

Amount

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed.

Material and labour for non skid, joint free ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for joint free non skid ceramic coloured tiles,of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, superior quality as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:4) complete all as specified & directed by Engineer-in-charge.

Material and labour for glazed ceramic coloured tiles of size 350mmx250mmx7mm or 350mmx450mmx7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick backing coat in CM (1:4) all as specified and directed by Engineer-in-charge.

Material and labour for coloured vitrified ceramic tiles light shade 9 to 10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for coloured vitrified ceramic tiles light shade 9 to 10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, on vertical surfaces as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Material and labour PCC 1:2:4, nominal mix, type B-1, using 20 mm graded mechanically crushed stone aggregate as in floor, 40mm thick, finished even and smooth without using extra cement complete all as specified. (Note:- Rates quoted includes the cost of labour for fixing glass dividing strips as required).

Supply only 38mm wide and 3mm thick glass dividing strip complete all as specified & directed by Engineer-in-charge.

Material and labour for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed by Engineer-in-charge.

Material and labour for 50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-charge.

Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified & directed by Engineer-in-charge.

Material and labour for brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Material and labour for brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6, except bricks complete all as specified & directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.

Material and labour for 15mm thick rendering cement plaster in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and fair complete all as specified and directed

Material and labour for 15mm thick rendering cement plaster in cement and sand mortar 1:4 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour for 10mm thick rendering plaster in Cement and Sand mortar 1:3 over brick work or concrete surfaces , finished fair and even without using extra cement, as in ceiling, chajjas, facias, at any position upto 10 meter height, including taking down old cement plaster and including necessary scaffolding complete all as specified & directed.

Material and labour for preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of Chalk whiting on plastered surfaces, preparatory to distempering complete, all as specified.

Material and labour for three coats of white wash on plastered or unplastered wall surfaces including preparation of new surfaces complete all as specified and directed

Material and labour for three coats of white wash on plastered or unplastered ceilng surfaces including preparation of new surfaces complete all as specified and directed

Demolition of reinforced cement concrete, reinforcement cut as required to facilitate, of any description as in parapet, roof wall, slab, chajjas, shelves and similar work in any position not otherwise specifically provided for, complete all as specified and directed.

Material and labour for reinforced cement concrete 1:2:4, nominal mix, type B-1 using 20mm graded crushed stone aggregate as in Chajja and similar works, all as specified. Note : Reinforcement and form work shall be measured and paid separately

Material and labour for form work to, chullah hoods, chajjas, troughs and similar items including edges and similar items including edges for fair finished surface of concrete flat complete all as specified and directed.

Material and labour for reinforced cement concrete 1:2:4, nominal mix, type B-1 using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. Note : Reinforcement and form work shall be measured and paid separately

Taking down chowkhats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down chowkhats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down shutters of any description exceeding 1.00Sqm but not exceeding 2.00Sqm each complete all as specified & directed by Engineer-in-charge.

Refixing shutter in same opening of any description exc 1sqm and n exc 2 sqm each including taking down, easing and adjusting ,renewal of unserviceable screws and also refixing builders hardware as required etc complete all as specified & directed by Engineer-in-charge.

Supply and fixing rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 290 (Gde -E-165 with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing complete all as specified & directed by Engineer-in-charge.

Supply and fixing for factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing on Page No. 160 of SSR-2010 (Part II) all as directed by Engineer-in-Charge.

Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

Supply and fixing for 35 mm thick second class hard wood factory made plain, framed, panelled shutters (Two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.

Supply and fixing glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.

Supply and fixing for glavanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tack or galvanised wire stapples complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repair factory made steel windows (Box type) with side hung shutters ,without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified & shown in drawings.

Supply and fixing in repair factory made steel windows (Box type) with side hung shutters ,with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified & shown in drawings.

Supply and fixing steel ventilator factory made with top hung shutter including hinges, steel peg stay, a shop coat of red oxide zinc chrome primer, fixed as in repair complete all as specified and directed.

Supply and fixing for 100mm size, butt hinges, medium weight, cold rolled mild steel fixed to PVC / wooden chowkhats fixed complete all as specified & directed.

Material and labour for 150mm aluminum anodized barrel tower bolts (ISI Marked) of extruded section, complete all as specifie

Supply and fixing for 150 mm size aluminium handle (ISI Marked), cast type, anodised complete all as specified & directed by Engineer-in-charge.

Supply and fixing 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, fixed as in repair complete all as specified and directed.

Supply and fixing aluminum alloy, anodized, sliding door bolt (ISI Marked),250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, complete all as specified and directed.

Supply and fixing 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed by Engineer-in-charge.

Supply and fixing for 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia & PVC connection 15mm size, 450 mm long with PTMT nuts in repairs complete all as specified & directed by Engineer-in-charge.

Supply and fixing for PVC connections 450mm long, 15mm size with PTMT nuts for WHB, flushing cistern, geysers etc fixed as in repair complete all as specified & directed by Engineer-in-charge.

Material and labour for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.

Material and labour for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Hacking out old broken glasses (any thickness, size, quality or description)from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, all as specified & directed by Engineer-in-charge.

Supply and fixing for 3mm thick, sheet glass ordinary quality and glazing with oil putty or beading in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge.

Supply and fixing 3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fixing in repair, vitreous china squatting pan "orissa" pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) and making good to the floor complete all as specified & directed by Engineer-in-charge.

Supply and fixing cast iron traps 'P' or 'S' suitable for 100mm bore cast iron pipe, fixed as in repair, complete all as specified & directed by Engineer-in-charge.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 20 mm bore complete all as directed by Engineer-in-charge.

Supply and fixing for mild steel galvanised iron water tubing 20mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, Bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Refixing old steel 20mm bore tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15 mm bore complete all as directed by Engineer-in-charge.

Supply and fixing for mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, Bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Refixing old steel 15mm bore tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar including disposal of demolished material n.exc 1.5 km complete all as specified and directed.

Material and labour 15mm thick granite slab (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed on cooking platform, counter slab etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 15mm thick in cement mortar 1:4including cutting / rounding of edges where requried complete all as specified and directed.

Material and labour 15mm thick granite slab (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed for wall lining (veneering to wall) and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 12mm thick in cement mortar 1:3 complete all as specified and directed.

Material and labour for machine cut Kota Stone Slab flooring, 15 to 18mm thick, best quality (minimum size 58cm x 58cm) over and including cement screed bed 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, complete all as specified and directed.

Material and labour machine cut kota stone slab flooring 15-18mm thick of size not less than 55cmx55cm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as in in skirting, dados, risers to steps, pillar etc, laid over and including 10mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing complete, all as specified.

Material and labour for CI floor trap 75mm dia with grating including jointing to waste pipe with run led jointed and seting in cement concrete type B-1 (1:2:4) , fixed as in repair complete all as specified and directed.

Supply and fixing fancy type bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-105gms), fixed as in repairs complete all as specified and directed.

Material and labour for 60mm thick, coloured ,factory made , prepolished rubber moulded precast concrete interlocking paver block, with grey cement and pigment,approved colour, design, any shape and size made by block making machine with strong vibratory compaction ,confirming to IS 15658-2006 of, M-35 grade, including jointed with neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles,laid over and including 20mm thick screed bed in cement mortar 1:6, including dismantling of old broken tiles or paver of any description complete all as specified and directed

Material and labour for 60mm thick, factory made , prepolished rubber moulded precast concrete interlocking paver block, with grey cement and no pigment, design, any shape and size made by block making machine with strong vibratory compaction ,confirming to IS 15658-2006 of, M-35 grade, including jointed with neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles,laid over and including 20mm thick screed bed in cement mortar 1:6, including dismantling of old broken tiles or paver of any description complete all as specified and directed

Material and labour for 80mm thick, coloured ,factory made , prepolished rubber moulded precast concrete interlocking paver block, with grey cement and pigment,approved colour, design, any shape and size made by block making machine with strong vibratory compaction ,confirming to IS 15658-2006 of, M-40 grade, including jointed with neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles,laid over and including 20mm thick screed bed in cement mortar 1:6, including dismantling of old broken tiles or paver of any description complete all as specified and directed

Supply and fixing 100mm bore cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed in walls, including taking down existing pipe and MS clamps complete all as specified and directed.

Supply and fixing 75mm bore cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed in walls, including taking down existing pipe and MS clamps complete all as specified and directed.

Supply and fixing ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) for 20mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gm) for 25mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing in repairs 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fixing stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) for 15mm bore pipe fixed as in repairs complete all as specified and directed.

Supply and fixing grating doom 140mm dia of PTMT (Minimum weight 50gms) fixed as in repair complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repair, stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repair for vitreous china wash basin white, flat back of size 550 x 400 mm white including waste fittings, brass chromium plated coupling, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repairs viterous china bowl urinal flat back, size of 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing & fixing plugs, waste pipe , bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified & directed by Engineer-in-charge.

Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified & directed by Engineer-in-charge.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

Material and labour for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets as in roofs, walls etc. and fixed with 'L' type or 'J' type hook or cranked bolts complete all as specified & directed by Engineer-in-charge.

Material and labour for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets as in roofs, walls etc. and fixed with 'L' type or 'J' type hook or cranked bolts but except sheet complete all as specified & directed by Engineer-in-charge.

Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.

Material and labour for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in padding over roof, mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (water proofing compound to be measured and paid separately)

Material and labour for rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC on concrete roof surfaces and finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).

Material and labour for 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid over a coat of oil based bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc having 75mm side lap joint and 100m end lap joint after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.

Material and labour for 40mm thick brick tiles are bedded in cement mortar (1:6) or lime mortar (1:3), 15mm thick and joints grouted and pointed flush in separate operation in cement mortar 1:3 mixed with crude oil @ 5% by weight of cement ,complete all as specified and directed.

Material and labour for 40mm thick brick tiles are bedded in cement mortar (1:6) or lime mortar (1:3), 15mm thick and joints grouted and pointed flush in separate operation in cement mortar 1:3 mixed with crude oil @ 5% by weight of cement ,except tiles complete all as specified and directed.

Material and labour for door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg , complete all as specified and directed.

Supply and fixing in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

Supply and fixing in repair 500ltrs capacity rotational moulded polythene water storage tanks ,white coloured, double layered (Cylinderically vertical with closed top) hoisted and fixed in postion including fixing arrangement for inlet, outlet, over flow and vent pipe of standard size complete including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fixing in repair 1000ltrs capacity rotational moulded polythene water storage tanks ,white coloured, double layered (Cylinderically vertical with closed top) hoisted and fixed in postion including fixing arrangement for inlet, outlet, over flow and vent pipe of standard size complete including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fixing for in repair 2000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including tank nipple, float valve, ball valve of PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Material and labour for lime concrete with 40 mm graded brick aggregate with lime mortar 1:3 all as specified & directed by Engineer-in-charge.

Demolition of lime concrete unreinforced in sunken portion of tiolet not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.

Material and labour for rendering 15mm thick plaster in cement mortar 1:3 mixed with WPC on fair faces of brick wall or on concrete surfaces in sunken portion of toilet and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).

Supply only Integral waterproofing compound, all as specified.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified & directed by Engineer-in-charge.

Supply and fixing PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc and taking down of existing pipe any type , complete all as specified and directed

Supply and fixing 110mm bore PVC (SWR) bends any radius, complete all as specified and directed

Supply and fixing PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, and taking down of existing pipe any type , complete all as specified and directed

Supply and fixing 75mm bore PVC (SWR) bend any radius, complete all as specified and directed

Material and labour for providing and fixing Gypsum Board 12mm thick in ceiling on and including standard GI snap grid powder coated, framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm (GI snap grid consisting of 1mm thick standard GI sections i.e. channel, angle, tee etc for intermediates, parameters etc) supported with 1mm thick standard GI section, fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, fixed as in repair complete all as specified and directed.

Taking down steel rolling shutters, push and pull type (area of opening n.exc 10 sqm each) complete all as specified and directed.

Supply and fixing steel rolling shutters (1.25mm thickness of lath), without ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push pull type with ball bearing including a shop coat of red oxide primer, fixed as in repair complete all as specified and directed

Taking down and re-fixing in same position steel rolling shutters, push and pull type (area of opening exc 15 sqm but n.exc 36 sqm each) after necessary repair including welding / riveting broken parts, tightening all the components, setting right the shutter, greasing / oiling and making fully functional complete all as specified and directed.

Supply and fixing lathe of rolling shutter 1.25mm thickness complete all as specified and directed

Supply only MS Springs of size 300mm to 450mm suitable for rolling shutter of size upto 3.50m wide complete all as specified and directed

Supply only MS Springs of size 600mm suitable for rolling shutter of size upto 5.50m wide complete all as specified and directed

Supply and fixing for 25mm dia mild steel pipe suitable for shaft pipe of rolling shutters,all as specified and directed.

Supply and fixing gear box with suitable crank handle suitable for operating of rolling shutter in up and down ward motion, fixed as in repair complete all as specified and directed.

Material and labour for providing 1.0mm to 1.5mm thick dune/ grit finish ready mixed product with natural stone granules / minerals in particle size of 400-600, 600-800, 1000-1200 micros consisting of excellent synthetic /acrylic binder anti cracking, anti foaming, anti fungal, anti rusting agents and applied directly over the cement plaster / stone surface over a coat of base coat including necessary steel scaffolding work, complete all as per manufacturer instructions complete all as specified and directed.

Material and Labour for 25mm dia coloured drapery rod including brackets, end caps etc fixed as in repair, complete all as specified & directed.

Material and labour for rendering 15mm thick plaster in cement mortar 1:4 mixed on brick wall or on concrete surfaces including dubbing coat if required on internal and external faces of parapet on roof top, RCC facia, RCC parapet wall, cornices, ceiling and finishing the surface even and smooth without using extra cement at height exceeding 6 metre but not exceeding 12 metre and applying 2 Coats cement base paint over a coat of white wash including taking down old plaster and removal of debris upto a distance of 1.50KM and providing necessary form work and scaffolding as per site requirement and carriage of all material all as specified and directed by Engineer-in-charge.

Supply and fixing PVC cover suitable for water storage tank capacity exc 500 ltrs but n.exc 1000 ltrs, including necessary tightening with screw etc complete all as specified and directed.

Cutting tree , plants and Grubbing up bushes and small tree trunk , girth of tree not exceeding 30cms , protruding from Brick Wall , RCC slab or beam,in shaft height upto 12 metre ,digging out roots,treating with herbicide chemical as per manufacturer's instructions, filling holes and leveling off ground with PCC 1:2:4 type B-0 , finishing the surfaces by plastering in CM 1:3 to match the existing surface and removing of unserviceable material to a distance n exc. 50 m and clearing site and providing necessary form work and scaffolding as per site requirement all as specified and directed

Material and labour for cleaning removing of all waste material, sludge, silt , mud and garbage and vegitation etc from shafts of toilet block sewerage shaft and removing of all waste materials exc 250 Mtrs but not exc 500 Mtrs and repair of plaster, flooring, pointing brick work ad plumbing work etc in shaft in fowl condition as directed . NOTE : Plumbing, flooring, plastering etc will be measured and paid extra in respective items)

Material and labour for welding work as in welding to butt hinges to old / new angle iron frame / pressed steel door frame / steel windows make smooth as required complete all as specified and directed.

Supply and fixing in repair, 32mm/40mm dia, 800 mm long PVC waste pipe for wash basin, sink , urinal etc complete all as specified & directed by Engineer-in-charge.

Refixing shutter in same opening of aluminium shuttter exc 1sqm and n exc 2 sqm each including taking down, easing and adjusting ,renewal of unserviceable screws and also refixing builders hardware as required etc complete all as specified & directed by Engineer-in-charge.

Supply and fixing factory made aluminum frame for door openings windows, partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading (wall thickness of aluminum section not less than 2mm), complete all as specified and directed (Glazing and aluminum hardware shall be measured and paid separately)

Supply and fixing factory made powder coated aluminum frame for doors, windows, partition wall etc including styles & rails with standard anodized aluminum section, power coated with one or more rebates including necessary joining cleats, glazing clips, anodized aluminium snap beading, screws etc (wall thickness of aluminum section not less than 2mm), complete all as specified and directed (Glazing, rubber beading and hardware shall be measured and paid separately)

Supply and fixing rubber beading for fixing glass panes in aluminum frames of size and shape as per site requirement complete, all as specified.

Supply and fixing 5mm thick tinted sheet glass fixed to aluminum frame work with standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Sqm in each pane, complete all as specified & directed. Note : anodized aluminum bead, rubber packing, aluminum screws etc, not included in this item and shall be paid under respective items.

Supply and fixing in repair for 100mm size 4 Levers, brass, mortice Lock, vertical type complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repairs for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of MS heavy duty complete all as specified & directed by Engineer-in-charge.

Supply and fixing vitreous china, wash down water closet pan, Pedestal pattern, starwhite colour with ‘P’ or ‘S’ trap, including flushing cistern with lid, fitting and seat cover, complete set, fixed as in repair complete all as specified and directed. MAKE : HINDWARE Constellation Cat Part No 20024 (S-10/P-19) cist -21038 or equivalent in PARRYWARE/CERA

Material and labour for vitreous China wash down water closet (pedestal pattern), coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and CP jet including PVC connection, fixed complete including demolition of old unservicable WC and provision of PCC 1:2:4, type B-I all as specified. Make: Cat Part No. 2008 for EWC, 2308 for seat cover, 2201/B for internal fittings of 'Cera' or equivalent in makes mentioned in Appx 'C'

Supply and fixing in repairs central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fixing wash hand basin, vitreous china, flat back , coloured , of size 1100X490mm with CP waste coupling / waste fitting, 32mm size PVC waste pipe, angle brackets, PVC connection 15mm size, 450mm long of make Prayag/ polytuf, fixed as in repair complete all as specified and directed.

Supply and fixing in repair, angular stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified & directed by Engineer-in-charge.

Supply and fixing for fancy type tubular towel rail Brass CP, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws fixed in repair complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repair health CP faucet with 1.0m long tube & hook complete all as specified & directed by Engineer-in-charge.

Supply and fixing corner glass shelf 300mm (with CP brass bracket) complete all as specified and directed.

Supply and fixing soap dish of cast copper alloy, chromium plated (CP), fixed as in repair complete all as specified and directed.

Supply and fixing toilet paper holder, cast copper alloy, chromium plated fixed in position, fixed as in repair, complete all as specified and directed.

Material and labour for preparing old wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (Ordinary tint) complete all as specified & directed by Engineer-in-charge.

Material and labour for preparation of old painted steel surface of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified & directed by Engineer-in-charge.

Material and labour for 18-19mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, including 6mm thick teak wood lipping fixed with nails after taking out/dismantling existing damaged articles complete all as specified and directed .

Material and labour for 12mm thick pre laminated particle board , exterior grade, pre laminated both side with decorative choice lamination fixed to aluminum frame work etc, complete all as specified and directed .

Supply and fixing for CP pressure jet for western type water closet with PVC connections 600 to 900mm long including brass head screw and suitable washer complete all as specified & directed by Engineer-in-charge.

Supply and fixing bib taps, 15mm bore,fancy type with wall flange, chromium plated, ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, all as specified.

Material and labour for preparation of old decorated plastered or unplastered surfaces of walls , applying two coats of exterior acrylic emulsion paint complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls and applying two coats of interior acrylic emulsion paint complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surfaces of ceiling and applying two coats of interior acrylic emulsion paint complete all as specified and directed.

Material and labour for preparation of old surface and applying one coat of texture (altex)/sand due (madrasi dana) etc of colour & pattern as approved by Engineer-in-Charge complolete all as specified and directed.

Material and labour for two coats of white wash on wall surfaces including preparation of old decorated surfaces complete all as specified and directed

Material and labour for preparation of old decorated plastered or unplastered surfaces of walls including cornices , pilasters etc , applying two coats of oil bound distemper complete all as specified and directed.

Material and labour for preparing previously decorated wall surfaces and applying a coat of cement base paint complete all as specified & directed by Engineer-in-charge.

Supply and fixing sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm fixed as in repair complete all as specified and directed.

Supply and fixing plate rack of stainless steel of size 900mmx 750mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed.

Material and labour for factory made prepolished rubber moulded cement concrete type A-1 chequered tiles made by block making machine with strong vibratory compaction of approved colour, design, of size 300mm x 300mm x 25mm thick laid over and including 20mm thick screed bed in cement mortar 1:4, including jointed with neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and dismantling of existing tiles complete all as specified and directed.

Supply and fixing, factory made coloured chequered cement concrete tiles 300mm x 300mm x 25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

Supply and fixing for Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 with one shop coat of zinc chromate primer paint complete all as specified & directed by Engineer-in-charge.

Material and labour 18-20mm thick baroda green marble stone slabs, width and length as ordered, best quality machine cut and granite polished to be fixed on flooring etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab over and including screed bed 15mm thick in cement mortar 1:4 complete including rubbing and granite polishing complete all as specified and directed.

Supply and fixing for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as directed by Engineer-in-charge.

Supply and fixing for 5mm thick PVC sheet fillet of width for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as directed by Engineer-in-charge.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Supply and fixing towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repairs complete all as specified and directed.

Supply and fixing urinal spreader, of PTMT (Minimum weight 60gms) white , suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.

Supply and fixing for swivel shower of PTMT any colour with shower arm 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weght 40 gms), fixed as in repair complete all as specified & directed by Engineer-in-charge.

Supply and fixing vitreous china urinal partition of size 310mm x 710mm terminating about 40cm above floor line complete all as specified and directed.

Material and labour for 150mm long mild steel helical door springs including roller and roller plate fixed to angle iron door frame including welding etc, complete all as specified and directed.

Supply and fixing Powder coated aluminum grill of standard section including ‘F’ type alumimium anodized beading and complete fixing accessories complete all as specified. MAKE : DECO GRILL, DG-104 OR EQUIVALENT FIXED WITH U OR H SECTION

Gunjan and Gunjan Associates

N.N.CONSTRUCTION

aggarwal contractors and engineers

Standard Const. Co.