Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹8.0 CrAdmitted-Finance | -12.78% | ₹8.0 Cr | L1 | Admitted-Finance |
| 2 | L2₹8.2 CrAdmitted-Finance 560 SADAR BAZAR JHANSI UTTAR PRADESH 284001 UDYAM UP 39 0009380 09AACFT8755H1ZP R M | JHANSI | UTTAR PRADESH | 284001 | -10.00% | ₹8.2 Cr | L2 | Admitted-Finance |
| 3 | L3₹8.4 CrAdmitted-Finance | -8.00% | ₹8.4 Cr | L3 | Admitted-Finance |
| 4 | Rejected-Technical | - | - | - | Rejected-Technical Documents incomplete as per tender checklist |
Tender Value
₹9.1 Cr
EMD Value
₹18.3 L
Closing Date
7 Apr 2026, 10:30 amClosed
Superintending Engineer, Electrical Circle, UPAVP,
Office of the Superintending Engineer, Electrical Circle, UPAVP, Office Complex, Sector-9, Vrindavan Yojna, Lucknow.
Construction of 11 KV Line for Sector- 8A, Sector-9A and 9B From 33/11 KV Substation Sector-9A Green Field Township Yojna, Ayodhya
2026_UPHDB_1129823_1
237/M-6 ED-I/44 Dt 20-03-2026
Open Tender
Electrical Works
180 days
Green Field Township Yojna
Please refer Tender documents.
3 documents required · 3 mandatory
₹8,850
Executive Engineer, ED-I, U.P.A.V.P., Lucknow
₹18.3 L
18 Apr 2026
25 Mar 2026
7 Apr 2026
25 Mar 2026
7 Apr 2026
25 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Supply, installation, testing and commissioning of 11kV Outdoor type Fuse type 4 way Ring Mains Unit consisting of 2Nos. 11kV 630A Load Break Switches only for Incoming & 2 Nos. 11kV 630A Load Break Swithes with suitable 11kV HRC Fuses along with suitable Terminal arrangement ( With 1 Set Spare 11 KV HRC Fuses) to connect atleast 300sqmm 3 Core 11kV HT Cable. The RMU shall be Extendible type suitable for Outdoor Installations & Fabricated out of 2mm thick CRCA Sheet Steel duly painted with PowderCoated Paint, The Bus Bar shall be 630A Auminum & shall duly supported by 12kV Grade Epoxy Inulators suitable to bear teh jerks of Shorth Circuit 25kA for 1 Sec. The job shall be completed in all respect including suitabe Foundation for Installation of RMU Complete with all required meterial and T&P etc. as per direction of E/I. | ||||||
| 2Supply, installation, testing and commissioning of 11kV Outdoor type Fuse type 5 way Ring Mains Unit consisting of 2Nos. 11kV 630A Load Break Switches only for Incoming & 3 Nos. 11kV 630A Load Break Swithes with suitable 11kV HRC Fuses along with suitable Terminal arrangement ( With 1 Set Spare 11 KV HRC Fuses) to connect atleast 300sqmm 3 Core 11kV HT Cable. The RMU shall be Extendible type suitable for Outdoor Installations & Fabricated out of 2mm thick CRCA Sheet Steel duly painted with PowderCoated Paint, The Bus Bar shall be 630A Auminum & shall duly supported by 12kV Grade Epoxy Inulators suitable to bear teh jerks of Shorth Circuit 25kA for 1 Sec. The job shall be completed in all respect including suitabe Foundation for Installation of RMU Complete with all required meterial and T&P etc. as per direction of E/I. | ||||||
| 3Supply of aluminum conductor 11 KV(E) XLPE cross linked polythene) over all served cable with flat galvanized steel strip armouring at a depth of 2 to 3 mtr. Below ground level in laid HDPE Pipe on surface the cable run shall be fixed on M.S. clamp etc. of suitable size proper completion work. Make (Polycab/ Gloster/Sterlite/Torrent/L.S. Cable/ Havells) | ||||||
| 3.01 | 300 Sqmm 3 core | 16,544 | RM | - | - | BI01010001010000000000000515BI0100001123 |
| 4S/F and jointing of Indoor11 KV jointing kit (Heat Sink) per XLPE cable including cost of all material Labour and T & P as per proper completion of work as per direction of E/I. Make (Raychem/3M) as per DSR 2022 S.No.10.4.4 | ||||||
| 4.01 | 300 Sqmm3core | 132 | Nos. | - | - | BI01010001010000000000000515BI0100001125 |
| 5 | Laying of H.T. Cable in Existing RC.C. Multiutility duct of Size 1.00 x 1.20 mt and making suitable size hole by core cutting machine in the duct wall for Cable(Inlet/Outlet) and after the laying of cable, hole must be completely packed with suitable material for avoiding water filling in duct complete with required all material T&P etc. as per Direction of E/I. as per PWD SOR 2024 S.I. No. 20e | 16,544 | RM | - | - | BI01010001010000000000000515BI0100001112 |
| 6 | Supply and Burring of Safe Earthing Electrode T-39 Zn-Zinc Coated, Length 3000 mm, outer pipe 76.30 mm x 3.2 mm inner pipe 42.40 mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square CI frame with hinged cover & masonary housing UPPWD SOR-2018 item no. 726 (D) | 60 | Nos. | 14,850 | ₹8,91,000 | BI01010001010000000000000515BI0100001113 |
| 7 | Supply & Laying of 32mm x 6mm G.I. Strip from earth electrode directly in the ground as required complete in all respect as per PWD SOR 2018 S.No. 717 | 300 | Rm | - | - | BI01010001010000000000000515BI0100001118 |
| 8 | S/F of danger board of size 200 x 250 x 1.6 mm of M.S. sheet fixed with clamp of 20 x 3 mm M.S. flate including bolts, nuts and washerduly painted completed with all material, labour and T&P etc. for proper completion of work. | 120 | Nos. | - | - | - |
stage.html
html • 0.03 MB
technical_2107570.pdf
techsummary_2107570.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.61 MB
Biddocumentayodhya.pdf
Tender Documents • 17.27 MB
BOQ_2107570.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid