Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
5 Feb 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engineering Wing of Health and Family Welfare Department
Sri. Harish
Upgradation and Infrastructure development works for PHC 1)Chilluru, 2) Belaguthi in Honnalli Taluk in Davanagere District Package 11
EWHFWD/2023-24/BD/WORK_INDENT252
EWHFWD/2023-24/BD/WORK_INDENT252
Reserved
Buildings
Electronic Documents, First(One Cover)
EWHFWD Executive Engineer Office Bengaluru
5 documents required · 5 mandatory
₹1,000
₹40,000
29 Jan 2024
29 Jan 2024
30 Jan 2024
Upgradation and Infrastructure development works for PHC 1)Chilluru Civil works
Clearing and Grubbing Road Land.Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlie...
Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dr...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, onsolidating each deposited layer by ramming and w...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to rick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Direction and Place Identification Signs with size more than 0.9 m2 size Board.Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2012 made of high intensi...
Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting as per IRC:67:2012 with vertical and latera...
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m² and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white c...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and fo...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing Coursed rubble masonry (first sort) with hard stone in foundation
and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).(P.No.9, I.No. 5.2,of PWD SR 2023-24 Vol-2) ---- ---- etc., com...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand).(P.No.9, I.No. 5.4,of PWD SR 2023-24 Vol-2) ---- ---- etc., complete as per specif...
Upgradation and Infrastructure development works for PHC 1) Belagutti Civil works
Clearing and Grubbing Road Land.Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlie...
Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dr...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, onsolidating each deposited layer by ramming and w...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Extra for providing formwork Foundation & Superstructure@ 5% (P.No.17, I.No. 2.5.1 of PWD SR 2023-24 Vol-1) ---- ---- etc., complete as per specification with all lead and lift and as per direction...
Extra for providing formwork Vertical walls & Roof@ 20% (P.No.17, I.No. 2.5.1 of PWD SR 2023-24 Vol-1) ---- ---- etc., complete as per specification with all lead and lift and as per directions of t...
Supplying, Fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straighting,cutting, bending, hooking, lapping/welding joints,tying w...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to rick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as requi...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Direction and Place Identification Signs with size more than 0.9 m2 size Board.Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2012 made of high intensi...
Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting as per IRC:67:2012 with vertical and latera...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing Coursed rubble masonry (first sort) with hard stone in foundation
and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).(P.No.9, I.No. 5.2,of PWD SR 2023-24 Vol-2) ---- ---- etc., com...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand).(P.No.9, I.No. 5.4,of PWD SR 2023-24 Vol-2) ---- ---- etc., complete as per specif...
Upgradation and Infrastructure development works for PHC 1) Belagutti watersupplyworks
Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain & brass thraded fittings. This includes jointing of pip...
Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain & brass thraded fittings. This includes jointing of pip...
Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain & brass thraded fittings. This includes jointing of pip...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore (P.No.117, I.No. 13.5.3 of PWD SR 2023-24 Vol-2) ---- Complete with ...
Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Vertical (P.No.118, I.No. 13.6.2.1 of PWD SR 2023-24 Vol-2) ---- Complete with all lead and lift ...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931(P.No.119, I.No. 13.12 of PWD SR 2023-24 Vol-2) ---- Complete with all lead and lift loading and unloading charges etc...
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.(P.No.119, I.No. 13.14 of PWD SR 2023-24 Vol-2) ---- Complete with al...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, wi...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long ...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing Single Phase Submersible Pump Sets of 100mm dia (4inch) suitable for bore well confirming to IS 8034- 2000 specifications, to work site with testing of as per instructions of engineer incha...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-2-252-Chilluru-Belaguthi (SC).docx
Tender Document • 0.53 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .