REPAIR TO DRAIN FOOTPATH AND CULVERTS UNDER AGE B R II OF GE AF ADM AREA KHERIA AGRA

Amount

Demolition of cement concrete (unrinforced) in ground floor and paving n.exc 15cm thick below or above GL complete all as specified and directed.

M&L for 100 mm thick cement concrete type C-2 (1:3:6) (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2 (1:3:6) (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2 (1:3:6) (using 40mm graded stone aggregate) as in plinth protection/ paving etc finished the surface even and fair complete all as specified and directed.

M&L for cement concrete type B-0 1:2:4, (using 12.50 mm graded stone aggregate) as in coping including necessary formwork complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickess in any position, laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine made, precast, coloured, cement concrete interlocking tiles of any shape and size with grey cement and pigment confirming to IS-15658 of 2006 of 60 mm thcik M 35 grade laid, jointed over & including 50 mm thick sand cusion and preperation of formation bed complete all as specified and directed.

M&L for chequred cement concrete tiles of size 250 mm x 250 mm x 22 mm thick, laid with cement slurry, jointed and pointed with grey cement and pigment as in floor/ path etc over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 30 mm thick sand stone slab over drain foot path complete all as specified & directed.

M&L for 40 mm thick PCC type B-1, 1:2:4, (using 20 mm graded stone aggregate) as in floor, laid in panels, finished the surface even and smooth with using extra cement including glass dividing strips 3 mm thick and 38 mm wide completeall as specified & directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work not exceeding 200mm thick fair finished complete all as specified and directed.

M&L for reinforced cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls,beams and colunms in floors and in shelves and the like complete all as specified and directed.

M&L for providing precast cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cover slab, shelve, bed plates set in CM 1:4, including chamfers, weatherings, throating etc. complete all as specified and directed.

S&F TMT steel bars 10 mm dia and over, cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking with and inlcuding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of brick work built in cement mortar or cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class 'B', old size bricks, in full brick thick wall, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster of any thickness on walls including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

Dismantling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs,aprons,etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for bricks, sub class 'B' laid flat on floors, old size bricks bedded jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.

M&L for bricks, sub class 'B' laid on edge in floors, old size bricks bedded jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.

M&L for flush pointing to brick tiles, bricks laid flat or on edge in CM 1:3 including racking out joints complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and directed.

M&L for moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 150 mm thick, 800 mm wide concrete type D-2 (using 40 mm graded stone aggregate) bed to drain pipes and tested, for 450 mm bore pipe, complete all as specified and directed.

M&L for 450 mm bore reinforced concrete pipes, class NP2 (ISI marked), laid and jointed complete with collars complete all as specified and directed.

S&F for 16-18 mm thick dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade - 202) of flat 30mm X 2mm, 150 mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment over & including 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

Dismantling of asbestos cement (corrugated/ semi corrugated) sheets including ridges in roof covering complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Surface exavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 40mm thick cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in footpath finished the surface even and fair complete all as specified and directed.

Dismantling of chain link fencing of any type & size complete all as specified and directed.

S&F chain link fencing of 50 mm x 50 mm x 3 mm and fixed to angle iron posts including line wires, and type to any type of standard, rails, straining bolts, etc & provn of winding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mess, size and type to any type of standard, rails, straining bolts, etc including provn of winding wire complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good natural ground disturbed ground complete all as specified and directed.

S&F mild steel angle iron posts and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, exc.10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending for weaving of chain link fencing complete all as specified and directed.

Excavation for post holes (or similar holes) in soft /loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates,rails braces, etc, conforming to Fe-290 Gde Fe-165 complete, drilled for fixing of steel sheeting or other covering Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastering and fixing complete all as specified and directed.

B K Construction Company

deva engineers

M/S SUMESH FURNITURE

GIRENDRA SINGH AND CO

Asha Construction

HARI CONSTRUCTION CO.

M/s M S Sharma and Co.

Rakesh kumar