A/R M/O to HPPWD Rest House at Sungri in tehsil Rohru

Amount

Cutting in earth work by manual means in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 ( one thousand nine hundred ninety)volum-i (one) and sorting out useful and unuseful materials and transporation of the unuseful material for disposing at dumping site (to be arranged by the contractor) to the satisfcation of Engineer-in-Chargethrough all modes of transporation including head load, animal load or mechnical means alongwith its leveling fine dressing and with all kind of labour, machineries , tools equpmentsand safety measures and incidentals necessary to complete the work by mechnical means and labour (if required). All usefull materials, such as stones, shingles, aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads lifts through all modes of transportation and used/ removed as per the direction of the Engineer-in -Charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidental charges.

Excavation in earht work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock, with chiseling and wedging out of rock;(where blasting is prohibited) and their intermediate classification of soils including ,dewatering wherever required, setting out to required lines, levels as shown on the drawing and as directed by the Engineer-in- Charge at site, according to the H.P.PWD. specification of 1990 ( one thousand nine hundred ninety)volum-i (one) and sorting out useful and unuseful materials and transporation of the unuseful material for disposing at dumping site (to be arranged by the contractor) to the satisfcation of Engineer-in-Chargethrough all modes of transporation including head load, animal load or mechnical means alongwith its leveling fine dressing and with all kind of labour, machineries , tools equpmentsand safety measures and incidentals necessary to complete the work by mechnical means and labour (if required). All usefull materials, such as stones, shingles, aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads lifts through all modes of transportation and used/ removed as per the direction of the Engineer-in -Charge. Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects, including all incidental charges.

Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling to any floor height and removal of the same for in situ-reinforced concrete and plain concrete work including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts, including all incidental charges.

Lintels bemans plinth beams girders bressumers and cantilevers

Providing and laying cement concrete 1:6:12 (one cement :six sand twelvel graded broken /crushed aggregate 40mm (forty milimetre nominal size)mechnicaly mixed and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per directions of Engineer in charge

Random rubble masonry with hard stone in foundation and plin th including leveling up with cement concrete 1:6:12(1cement :6course :12graded stone aggregate 20mm nominal size upto plinth level (a)cement Mortor 1:6(1cement :6sand)within all leads and li

Stone maonsry cement mortar for sub structure complete as per drawing and tecnhnical spefication clause 702.704,1202 and 1204 Radn rubble masonry in cement motor 1:6 (1cement :6sand)within all leads and lifts as per directions of Engineer in charge

Brick masonry using common burnt clay building bricks in cement mortar(1:6)1cement :6sand)within all leads and liftsd as per directions of Engineer charge

Half brick masonry in common burnt clay building bricks in super structure in all floor levels in cement Mortar 1:4(1cement :4sand)including carrige of materials in all leads and lifts as per direction of Engineer in chrge aboe plinth upto all floor level

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centring shuttering, strutting and propping etc. with wooden /steel battens and ballies, height of propping and centring below supporting floor to ceiling in all heights in all floors and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. in :-Fl;at surface such soffits of suspended floors roofs landings and the floor etc upto 200 mm in thickness

Eges of slab and breaks in floor an esll within all leads and lifts as per direction of Engineer in charge

Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) michamically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforced concrete work. including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.suspended floor roofs landing and shelves and their support balcones beams girders bressumers and cantileve

Providing tor steel rfeinforcement cement concrete work including bending binding and placing in position complete including cost of binding work complete and other incidneital due fo to completion for all floor within all leads and lifts as per directions of Engineer in charg above plinth le

Providing wood work in frame of door window clreastory windows etc within all leads and lifts as per directions of Engineer in charge

Providing and fixing panelled glaed and glazed shutters for door windows and clreasty windows including black enamelled iron butt hin ges with necessary screws

Providing and fixing wire gague shutter using glalvanised MS wire gauge of IS gauge designastion 85 G with a wire of dia 0.50 (zero dcimal fifty six milimette for door and windows clreastory windows including bright finished back enameled iron hinges with necessary 40mm (forty milimetre)thick 2nd class deodar wood within all leads and lifts as per directions of Engineer in charge

Providing under layer plinth protection 75mm (seventy five melimetres)thick (un-consolidated)bed of dry brick/stone aggregate 40mm(forty milmetres Nominal size well rammed and consolidated and grouted with fine sand including preparation of ground within all leads and lifts materials and other incidentials

Providing plinth protection 50mm(fifty milimetre)thick cement concrete 1:3:6 (one cement three sand six graded crushed stone aggregate 20(twenty milimtre)nominal size)Incluing finishing the top surface of concrete smooth within all leads and lift as per directions of Engineer in charge

construction course rubble humer dressed U shape open surface drain with side wall 15x22 cm in cement mortar 1:6(1cement :6sand)and inside plastering 1:3 (1cement :3sand)including earth work and laying 10cm cement 1:5:10 (1cement :5sand:10 graded stone aggregate of 40mm nominal size)and 7.5cm cement concrete cement 1:2:4 (1cement :2 sand :4graded stone aggregate of 20mm nominal size)and finished with a floating coat of neat cement complete as per standared design

Stone soling propery hand packed filling instrstics with spals and consolidating including spreading water complete within all leads and lifts as per directions of Engineer in charge

Providing and laying cement conrete 1:4:8(1cement :4sand :8 graded stone aggretate 40mm nominal size)and curing complete excluding cost of form work 099130100 foundation and plinth within all leads and lifts as per directions of Engineer in charge

Providing and laying spartic cermix tiles 5.5 thick in floor(300x30mm size)treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cment :3sand )finished with flushing pointing in white cement within all leads and lifts as per directions of Engineer in charge

White glazed tiles 6mm(six milimetre)thick in skirting risers of steps and dado 12mm(twelve milmtre)thick cement mortar 1:3(one cement is to three sand and jointed with cement slurry the rate is inclusive for carrige of materials within all leads and lifts as per directions of Engineerin charge

15mm (fifteen milimetre)thick cement plaster in single coat on fair side of brick/concrete stone wall for interio0r plastering upto all floor level including arrises internal rounded angles chamfer and or rounded angles not exceeding80mm (eigfhty mimetre)in girth and finished even and smooth with cement mortar 1:6(one cement six sand)within all leads and lifts as per directions of En gineer in charge

Providing wood work frame of false ceiling partitions etc sawan and put up in position within all leads and lifts as per directions of Engineer in charge

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws(frame work and cover illets to be measured and paid for seprately)within all leads and lifts as per directions of Engineer in charge

Applying white cement based wall care putty over plaster surface after throughly brushing the siurface free from mortar droips dust loose material and other foreign matter sand papred smooth to give final matter finish to the surface complete within all leads and lifts as per directions of Engineer in charge

Distempering (two coats)with oil bound washable distemper of approved brand and manfuacture and of required on undecorated wall surface on all floor to give andeven shade over and including priming coat of whiting after thoiurhgly brushing the surface free from mortar dropping and othyer foreign materials including preparing the surface even and sand parpared smooth including carrige of materials within all leads and lifts as per directions of Engineer in charge

Finishing wall with weather prrof exterior grade emulsion of approved design (Apexultima)or its equarlied on undecorated wall surface(two coats)to give and eveh shade and final finish after throughly cleaning the surface to remove all dirt dust and other foreign matter etc including sand paper smooth complete with all leads and lifts as per directions of Engineer in charge

Applying priming coat over new wood and wood based surface after and including preparing the surface by throughly cleaning oil,grease dirt and other foreign matter sand papring and knotting with ready mixed paint brushing wood priming pink the rate in incluslve for carrige of materials within all leads and lifts as per direcitons of Eng8ineer in charge

Painting two coat (excluding priming coats on new wood and wood based surface witn enamel paint brushing to given an any shade including cleaning the surface of all dirt dust and other foreign matters sand cleaning and stopping within all leads and lifts as per directions of Engineer in charge

Providing and fixing C.P sliding door bolts anodized trannsparent or dyed to required coloured and shade with necessary screws etc completed within all leads and lifts as per directions of engineer in charge 300.x16

Providing and fixing aluminium tower bolts andozed transparent or dyed to required colour and shade and colour with screws etc complete The rate is inclusive for carige of materials within all leads and lifts as per directions of Engineer in charge 200x10

Providing and fixing aluminium handle anodized transparent or dyed to required colour and shade with njecessary screws etc complete within all lds and lifts

WATER SUPPLY AND Sanitary installation

Providing and fixing wall ceiling floor glananised mild steel tubes (medium grade)tube fitting (earth work in trenches to be measured and paid for spreately)including carrige of materials within all leads and lifts

15mm fifteen milimetre nominal bore

20mm(Twenty milimetre)bore

Making conntion of galvanized steel distrbution branch with galvanised mild steel main 20mm to 40mm(twenty milmetre to forty milimetre)nominal bore by Providing and fixing tree including cutting and threading the pipes complete including carrige of materials within all leads and liftsa as per directions of Engineer in charge

Providng and fixing PVC water storage tank of ISI marked G.I inlet and outlet connection 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto a height of 10 metres above ground level within all leads and lifts as per directions of Engineer in charge 1000 litre net capacity tank

Fixing water metre stop cock in glavnaised mild steel including necessary fittings such as mild steel galvanised jam out socket etc,cutting and making long screws complete (water metre and stop cock to be measured and paid for serpately within all leads and lifts as per directions of engineer in charge 110mm(one hundred and ten)15nominal size

Providing and fixing ISI marked high pressure PVC (finolex)of working pressure not less than 4.5 kg/sqm waste and ventilting pipe including fixing with approved adhesive complete (i)100mm (one hundred and ten)nominal size

75mm dia

Providing and fixing PVC (finolex)door bend with oval acess door,insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive tc complete 100mm nominal size

Providing and fixing PVC (finolex)plain bend ISI marked including fixing with approved adhesive etc comnplete (I)100mm dia

Providing and fixing PVC floor trap(Finolex)ISI marked of self cleaning design includinhg fixing with approved adhesive cost of cutting and making good the wall and floors etc complete

Providing and fixing vitrious china wash down water close(European type WC pan )with internbal Por S trap including jointing the trap with soil pipe in cement mortar 1:1(1cement:1sand)seat and cover to be measured and paid srepately includinhg carrige of materials within all leads and lifts Anglo Indian universl closet

Providing and fixing 100mm size P or S trap for water closet(Squatting pan)including joiinting the trap with the pan and soil pipe in cement 1:1(1cement :1sand)including carrige of materials and leads and lifts sand cast iron

Providing and fixing 10.00 ltr capacity PVC how level flushing cistern Hind ware sleek ultra design No 186575 size 42x39x14cm or equalvainent withih a pair of brackets with fittting such as lead valve syphon,15mm nominal size PVC ball valve with polytehene float,with push button coplings for connection with intlet outlet and over flow pipe 40mm dia C.P flush bend including cutting holes in wall and making good the same and conneting the flush bend with cistern and closet (over flow)pipe to be measured and paid for sperately inluding carrige of materials within all leads and lifts as per directions of Engineer in charge

Providing and fixing vitriuous china hand ware ISI marked Is No.2556 or equilvent wash basin with single hole for pillar tap with C.I or MS brfackets painted white including cutting holes and making good the same but including carrige of materials within all leads and lifts as per directions of Engineer in charge flat back 550x40mm

Providing and fixing locking mirrior of superiof glass with plastic frame including carrige of materials within all leads and lifts as per direcitons of Engineer in charge

Providing and fixing C.P brass towel rail complete C.P brass brackets fixed to wooden plugs with C.P brass screws including carrige of materials within all leads and lifts as per directions of Engineer in charge 600x20

Providing and chromium plated bass soap dish with C.P brass brackets to wooden cleats with C.P brass within all leads and lifts as per directions of Engineer in charge

Providing and fixing C.P brass bib tap with capstan head including carrige of materials within all leads and lifts as per directions of Engineer in charge 15mm nominal size

Providing and fixing CP brass pillar tap with capstan head including carrige m aterials head including carrige of materials within all leads and lifts as per direction of Engineer in charge 15mm nominal size

Providing and fixing C.P brass pillar tap with capstan head including carrige of materiasl 15mm nominal size within all leads and lifts as per directions of Engineer in charge

Providing and fixing connection pipe heavy duty with brass union including carriage of materials 15mm nominal bore within all leads and lifts as per directions of Engineer in charge

Providing and fixing brass full way valve with wheel including carrige of materials withn all leads and lifts as per directions of Engineer in charge

Constructing manhole with R.C.C. top slab in 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4;8 ( icement ; 4 sand : 8 graded stone aggregate 40 mm nomonal size), inside plastering 15mm thick with cement mortar 1:3 (1 cement : 3 sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing including carriage of materials within all leads and lifts :-

Inside size 800mmx800mm and 500 mm deep including C.I. cover with frame (Light duty single seal pattern -1) 455x610 internal dimensions total weight of cover frame to be not less than 38 kg.(Weight of cover23 kg and weight of frame 15 kg.)

with 200mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand) :-including carriage of materials within all leads and lifts .

Providing and fixing plastic seat (saoild/Hollow type and cover for wash down water closet with CP brass hinges and rubber buffers within all leads and lifts as per directions of Engineer in charge

Cost of Geazer

Ranvir Tegta