PROVN OF CERTAIN EXTERNAL ELECTRICAL AND WATER SUPPLY SERVICES INCLUDING EXHAUST FANS FOR OPS WORK SHELTER AT JALIPA AND PELMETS FOR WINDOWS AND DOORS OF BLDG NO. P-96 AND SPECIAL REPAIRS TO STREET LIGHTS IN D AREA AT JASAI UNDER GE (A) BARMER

Amount

Disconnecting and taking down old unserviceable 60/70/150/250 watt SV lamp street light fittings without taking down brackets fixed on HT/LT poles, complete all as specified and as directed .

Supply, fix ,connecting and testing of energy efficient, pressure die cast housing with heat resistant toughened glass and individual high power LEDs with secondary optics and IP-66 protection of street light luminaries 60 watt , impact resistance, fixed on pole including taking down unserviceable light fitting complete all as specified and as directed . Make : CROMPTON Cat Part No. TRP-409-60-57-SL-GL-NSG or techno commercially equivalent model of make Bajaj/Philips/Havells/Wipro

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plain area and not exceeding 1.5m deep in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point in soft / loose soil complete as specified and directed.

Returning filling including spreading levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified.

Supply and spreading clean dry sand ( tibba sand) in trenches for cushioning to PVC cable and punning to provide required cover to UG cable complete all as specified and directed . Note :- Punned thickness shall be measured for the purpose of payment.

M & L for 40 to 50 mm thick roughly hammer stone slab 25 to 30 cm wide & not less thean 60 cm long laid down in trenches connecting to each other with gaps between adjacent slab not exceessing 10 mm over under ground cable for protection complete all as directed at site.

Supply and laying un-reinforced pre-cast concrete cable cover, class LV, Type-1 flat, size 250mm x 150mm x 40mm as mechanical protection to underground cables laying with length of the cable cover perpendicular to axis of cable complete all as specified and directed.

Supply and lay cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core for connecting of main switch unit for street light including clamping accessories wherever required complete all as specified and as directed. Note :- Cable shall be drawn through existing GI (Cable protection) pipe where required.

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 3.5 core 25 sqmm complete all as specified and directed Note : Excavation, earth work, sand, bricks and PCC will be measured and paid under relevant items

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 3.5 core 50 sqmm complete all as specified and directed Note : Excavation, earth work, sand, bricks and PCC will be measured and paid under relevant items

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 3.5 core 95 sqmm complete all as specified and directed Note : Excavation, earth work, sand, bricks and PCC will be measured and paid under relevant items

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 3.5 core 240 sqmm complete all as specified and directed Note : Excavation, earth work, sand, bricks and PCC will be measured and paid under relevant items

M&L plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roads/pavings/Hardstanding exceeding 10cm thick and including cutting/dismantling exisitng raods/pavings/Hardstanding disposal of debris complete all as specified and as directed. Note : Excavation require beneath the road cutting shall be measured and paid separately.

S&F GI tubing 40mm bore light grade with all fittings and laid in trenches under road / paving portions etc, for protection of cable complete all as specified and as directed.

S&F GI tubing 80mm bore light grade with all fittings and laid in trenches under road / paving portions etc, for protection of cable complete all as specified and as directed.

S&F GI tubing , light grade of 40mm bore with fittings fixed to wall / pole protection including clamping of pipe with GI flat of size 25X3mm including nut, bolt & washers of size 25X12mm whereever required complete all as specified and as directed.

S&F GI tubing , light grade of 80mm bore with fittings fixed to wall / pole protection including clamping of pipe with GI flat of size 25x3mm including nut, bolt & washers of size 25X12mm whereever required complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 60cm X 60cm X 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized GI earth strip 32mm x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron mild steel all as shown in Electrical Plate No. 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanized iron 40mm bore light grade pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal / salt, funnel etc complete including taking down the existing unserviceable earthing all as specified and as directed.Note : - (i) The concrete pit shall be PCC 1:3:6 type C-1, 40mm thick pre-cast cover slab of RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate, reinforced with 8mm TMT bars @ 10 cm c/c on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in Electrical Plate No. 3 of MES SSR Part-I, (ii) Item includes the cost of GI pipe up to 7.50m for protection of earth wire/strip, (iii) Item includes the cost of earth lead wire/strip up to7.50m & (iv) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate quoted.

Earthing complete with galvanized steel earth plate electrode 60cm X 60cm X 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized GI earth strip 32mm x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron mild steel all as shown in Electrical Plate No. 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth strip protected by galvanized iron 40mm bore light grade pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal / salt, funnel etc complete all as specified and as directed.Note : - (i) The concrete pit shall be PCC 1:3:6 type C-1, 40mm thick pre-cast cover slab of RCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate, reinforced with 8mm TMT bars @ 10 cm c/c on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in Electrical Plate No. 3 of MES SSR Part-I, (ii) Item includes the cost of GI pipe up to 7.50m for protection of earth wire/strip, (iii) Item includes the cost of earth lead wire/strip up to7.50m & (iv) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate quoted.

Supply, install, commission and testing facory made sheet metal enclosure TPN copper bus bar box, outdoor type made out of CRCA sheet of 3.15mm thick , outdoor canopy type, CPRI approved , conform to IS-8623, IP-54 class protection, floor mounted, dust and vermin proof,front and rear operated door, mounted on MS angle iron frame work of size 40X40x6mm ,with necessary locking arrangement and duly painted with two coats of powder coated paint of approved shade after seven tank treatment process both internally and externally and fixed 0.5m above ground level and 0.3m grouted in ground / floor including necessary excavation/ earth work in any type of soil, foundation PCC 1:4:8 type D2 and the panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete with suitable capacity of copper bus bar 200Amp TPN with suitable size of PVC insulated copper conductor, thimbles glands complete all as specified and directed with the following accessories :- (a) MCCB 100 Amp FP, 10 KA (Incoming control) (b) MCB 40 Amp SPN -04 Nos (Outgoing control)

Fixing only exhaust fans 250mm sweep, plastic body, 230 V, 50 Hz, BEE 5 star rating including provision of fixing accessories complete with louvers at existing opening complete all as specified and directed; Note : Exhaust fan 250mm sweep will be issued under Sch 'B' as "free for fixing".

Supplying, laying , jointing and testing of 40 mm bore GI tubing, medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etc and connecting complete all as specified and directed by Engineer-in-charge.

Supplying, laying , jointing and testing of 20 mm bore GI tubing, medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etc and connecting complete all as specified and directed by Engineer-in-charge.

Supplying, laying , jointing and testing of 20 mm bore GI tubing, medium grade (ISI marked) laid in fixed to wall/Ceilings/pillars or laid in floors with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etc and connecting complete all as specified and directed by Engineer-in-charge.

Supply & Fixing of 40 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing of 20 mm bore gun metal, globe or gate valve, heavy duty confirming to IS-778 with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed by Engineer-in-charge.

S&F float / ball valve for 20mm bore pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed. (minimum weight 210 gms)

Drilling & tapping to 20mm bore GI tubing for branch connections of the 20/25mm bore GI tubing necessary welding, clamps, rubber gasket etc complete all as specified & directed by Engineer-in-charge.

M&L construction of valve pit / chamber suitable for 80mm dia valve of inner sizes 600 x 600 x 600mm with stone masonry construction on PCC 1:4:8 type D2 foundation concrete 15 cm thick complete with mild steel sheet cover 3 mm thick and angle iron frame of size 40 x 40 x 6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and including locking arrangement and lifting handle all as specified . All internal surface and external surface upto 15 cm below normal ground level of stone masonry shall be plastered 15mm thick in cement mortar 1:4, finish fair and even including necessary excavation and earth work in any type of soil complete all as specified and as directed .

M&L 24mm thick plywood grade BWR, type BB, as in palmets box , etc complete all as specified and directed.

M&L 24mm wide and 6mm thick external teak wood lipping, fixed with nails on palmet box edges, etc complete all as specified and directed.

S& F Harrison rails 20mm dia, mild steel, chromium plated with fixing brackets, stops rollers, etc complete all as specified and directed.

M&L for preparing wood or wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and as directed.

M&L steel palmet patti for hanging pelmet, made out of galvanised iron 12mm long and 15mm wide and 1mm thick complete all as specified and as directed.

National Rewinding Works

M/s Malinath Electricals

M/S JOGARAM SUJARAM JASSAI

M/S TANUSHREE CONSTRUCTION COMPANY