SPECIAL REPAIR TO KITCHEN CABINETS IN 08 BLOCKS AND PROVN OF WPC FRAME WITH SHUTTER AND SHELVES IN LIEU OF TERMITE INFECTED WOODEN PARTICLE BOARD AND OTHER MINOR WORKS UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and as directed.

M&L for first quality coloured Non skid ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick Screed bed or bedding layer in cement mortar for laying floor finishes complete all as specified and directed.

M&L for first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border, of size 350x 450 x 7mm to 8 mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white cement with pigment to match with shade of tiles laid on over and including 10 mm thick rendering in cement mortar 1:3, complete all as specified and as directed. Note :- Pattern of the tiles shall be approved by GE at the time of execution.

M&L for cutting holes into or through brick walls exc 150 sqcm but not exc 400 sqcm built in cement mortar and making good in cement mortar 1:3 or cement concret 1:2:3 type B-1 (using 20 mm graded crushed stone aggregate) complete all as specified and directed.

Supply, fabrication & installation of box-type modular kitchen cabinets (below/above counter) up to 600 mm depth (or as per actual size at site) made of 18 mm thick HDHMR pre-laminated waterproof & termite resistant board for top, bottom, back, partitions, drawers, shelf etc. Shutters & exposed surfaces made of 18 mm thick HDHMR laminated with 3 mm thick acrylic high gloss sheet on one side and 0.8 mm balancing laminate on other side, factory pressed. Edges finished with PVC edge banding tape applied by edge bending machine etc including auto closing spring loaded hinges(hydraulic type), magnetic catchers, SS handles stainless, steel soft closing heavy type telescopic drawers channel etc complete all as per approved shop drawing and as directed. Note :- i) Fittings & fixtures shall be deemed to be included in rate quoted by the tenderer. ii) The measurement for payment shall be based on the superficial area of the modular kitchen cabinets.

S & F Modular Cabinet Kitchen accessories of Stainless Steel grade-304, 6mm thick rod including :- (i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) , (ix) Dust bin, (x) Cleaning kit rack of size as per site requirement all specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repair PVC waste pipe flexible type 25mm dia suitable for couplings 32mm & 40mm dia 600mm long complete all as specified and as directed.

S&F in repair PVC (SWR) pipes, 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for Cast iron nahani trap, 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including taking out old complete all as specified and as directed.

M&L for preparing of plastered surfaces of walls and ceiling applying two coat of OBD paint including one coat of putty complete all as specified and as directed.

M&L for preparing of old decorative surface of wall and applying two coats of oil Bound distemper including cost of removal of vegitaton plants, filling crack and holes complete all as specifed and as directed.

S&F 20 mm outer dia CPVC pipes SDR 11 including Brass threaded & Plain CPVC SDR 11 fittings (Brass threaded Tee, Brass threaded elbow Brass theaded male female adaptor, MTBA etc) as in wall, floor including taking down of 15 mm bore steel tubing and connection including cleaning for refixing or removed to store,complete all as specified and as directed.

M & L for cutting/chassing for stone/ Brick wall to conceal the GI pipes into the walls and including the finishing with cement mortar in 1:4 and not exceeding 10 cm girth complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed.

S&F as in repair 15 mm bore CP fancy type sink mixer long body tab (wall mounted) with 150mm (6") long swivel spout, wall flange and provision for water Point connection, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule.complete all as specified and directed.

Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of mud in roof, any thickness, including plastering and leeping upto two storey bldg incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area complete all as specified and as directed.

M&L for 75 mm thick (average thickness) plain cement concrete 1:2:4 type B-0 (using12.5 mm graded aggregate) mixed with water proofing compound, as in roof padding to maintain the uniform slope complete all as specified and directed. Note :- Liquid water proofing compound will be mixed as per manufacturer's instruction and rate will deemed to be included in the quoted rate.

M & L for rendering 10 mm thick plaster on concrete surfaces in cement mortar 1:4 on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement all as specified and as directed Note :- Liquid water proofing compound will be mixed as per manufacturer's instruction and rate will deemed to be included in the quoted rate.

M&L for priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified and as directed:-

Applying oil bound bituminous primer at the rate of 0.30 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.

Laying 3mm thick APP polymeric water proofing membrane of weighing not less than 3.6 Kg/Sqm, black finish reinforced with non woven polyster matt, (weight not less than 160 gm/Sqm) with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface.

Note:- The water proofing treatment shall be got carried out by the manufacturer or by their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment and 2.5% of work done amount for srl item No 21.00 or Rs 5000/- which is more shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work or in lieu, contractor may deposit FDR issued from bank for the said amount for 10 years, which shall be released by GE on expiry of satisfactory completion of 10 years period.

S & F Heat Resistant Terrace/roof Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid over and including 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner complete all as specified and as directed.

M & L for cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered and hold fast, on edge including necessary form work complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering with Ready Mix Plaster, 15mm thick on faces of brick work or concrete surfaces, including necessay scaffolding of building upto 4th story complete all as specified and directed.

Disconnecting existing tanks, exceeding 500ltr but not exceeding 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning complete all as specified and as directed.

Disconnecting existing tanks, exceeding 250ltr but not exceeding 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning complete all as specified and as directed.

M&L for preparation of new plaster surfaces of wall and applying water proof wall care putty 2 mm thickness over plaster surfaces to prepare the surfaces even and smooth and finishing walls with acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer @ 2.20 Kg/10Sqm) complete all as specified and as directed.

THE LOTUS BUILDTECH (BID ID -3385190)

M/S Davinder Kumar (BID ID -3385246)

J Construction (BID ID -3384943)

aggarwal engineers contractors (BID ID -3385111)

MS BUILDTECH (BID ID -3384662)

A R construction (BID ID -3384904)

M/S Parmod Johar (BID ID -3392358)