General Repairing of room no. 101A at Dr. Ram Manohar Lohiya Parikalp Bhawan, Telibagh, Lucknow.(Lot No.37)

Amount

Dismantling doors, windows and clerestory window(steel or wood) shutter including chowkhats, etc, complete and stacking within 50 meters lead of Area beyond 3 sqm

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of amulba/rubbish to the nearest municipal dumping ground , all complete as per direction of Engineer-in-charge. for door/window/ clerestory window

Dismantling tile work in floors and roofs laid in cement mortar including stacking of material within 50m lead for thickness of tiles 10mm to 25mm.

Brick work with common burnt clay ( Non Modular) bricks of class 150 in Foundation and plinth in cement mortar 1:4( 1 Cement : 4 Coarse sand)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

15 mm dia cpvc pipe

20 mm dia cpvc pipe

100 mm dia pipe

12 mm cement plaster of mix 1:4 ( 1 cement 4 coarse sand)

Providing and laying in position Cement concrete of specified grade excluding the cost of centring and shuttering all work up to plinth level 1:3:6 (Cement : 3 coarse sand : 6 graded stoe aggregate 40 mm)

Providing wood work in frames of doors, window, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) Sesond class teak wood

Providing of fixing ISI marked flush door shutters conforming to IS 2202 (Part i) non decorative type core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply venneering with vertical grains or cross bands and face veneers of both faces of shutters 35 mm thick including ISI marked stainless steel but hinges with necessary

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 1200 mm

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Two Track panels sliding window made of (small series) frame 52x44 mm & sash 32x60 mm both having wall thickness of 1.9+ 0.2 mm and single glazing bead of appropriate dimension. (Area of window Upto 1.75 sqm) (2 track slider window)

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to entre,drawings and as directed by Engineer-in-Charge.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyserpoint of approved quality conforming to IS:8931.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Supply and Fixing of 55 watt indoor recess mounting LED Square fitting for Armstr5ong ceiling having powder coated die cast aluminium housing with body with extended heat sink and diffuser of polycarbonate meterial and driver set complete in all respect.

KISHORI (BID ID -5440828)