PROVIDING AND LAYING OF RMC M-40 GRADE ON ROAD FROM HARDWARE CHOWK TO PYALI CHOWK IN WARD NO.02. ALONG WITH 5YEAR MAINTENANCE GUARANTEE.

Amount

P/L in position separation Membrane on 125 micron thick plastic sheet complete as per specification.

Providing & Fixing of 1- 1/4” dia (32mm) PVC pipe for bar.

Providing and laying in position machine batched, machine mixed cement concrete vibrated ready mixed cement concrete (R.M.C.) of grade M-40 with cement content not less than 420 kg./ Cum imparting minimum flexural strength of 4.0 mpa at 28 days. The slump value will be in the range of 30+15 mm for laying on road including the cost of steel form work with sturdy M.S. Channel section including cost of admixture in recommended proportions (as per IS 9103) to accelerate/ retard-setting of concrete improve workability without effecting strength and durability including pumping concrete with pumps if required and curing and protection with curing compound, finishing to line grades as per MORT&H specification clause 600. The RMC is to be procured from plants of ACC RMC plant, Nuvoco Mangla Redimix Pvt. Ltd, Radha Cement Products, J P & Bro. RMC & Shree Ram Concrete at Faridabad & Gurgaon. The finishing of the laid cement concrete with surface vibrator and mechanical trowel including cost of curing for 28 days, barriers, diversion of traffic, lighting arrangement and chowkidar etc. complete in all respects to the entire satisfaction of the Engineer-In-Charge. Along with 5 Year Maintenance guarantee.

Providing and making saw cut transverse joint/construction joint as per approved drawing provided at a maximum distance of 4.5m including the cost of covering of dowel bars with thin plastic sheath for at least 60% of the length made up to depth 20mm before sealing the joint 5mm before sealing the joint 5m thick compressible de-bounding strips with paper bock shall be filled with polysulphide/silicon sealant. The sealant shall be applied slightly to a lower level than the slab with a tolerance to the entire satisfaction of the engineer-in-charge.

Providing and making saw cut longitudinal joints between two lanes including cost of providing protective coating and bituminous paint for 75mm on each side of joint on tie bars. Initially 3-4mm vide cut shall be made up to 1/3 depth of slab and sealed temporarily with a jute rope. At the time of sealing of the joint temporary seal shall be taken out before sealing the joint 2mm thick compressible de-bounding strips with paperback shell be inserted to the bottom of the groove. The groove shall be filled with poly sulphide / silicon sealant. The sealant shall be applied slightly to a lower level than the slab with a tolerance of 2+1 mm complete in all respect as per approved drawing to the entire satisfaction of the Engineer-in-charge.

Extra for making rough surface of the concrete pavement complete as per specification.

Providing, laying, spreading and compacting close graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to work site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired field density.

Providing/Making Road Marking with hot applied Thermoplastic compound with reflectorising Glass Beads on Bituminous Surface. Providing & Laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gms/sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be leveled, uniform and free streaks and holes.

Bidder Name

Amount

RK GANDHI(GSTN-06ALIPG1659G1Z7)

HCK Infratech Pvt. Ltd.(GSTN-07AADCH2266D1ZW)

RK GANDHI

RK GANDHI