ADDN/ALTN AND SPECIAL REPAIRS FOR RENEWAL AND IMPROVEMENT OF E/M SERVICES AT NAVAL AREA, GOA

Amount

SURVEY MAPING

Provision for GIS based survey using attribute and data collection of utilities and certain civil structures above ground etc.by visual inspection, maps and drawings available with the department, free to use sites like Google maps, data provided by the departmental engineers, maintenance records etc. in entire area (approx.3212 acres) under Concerned GE for creation of base map to cover the below described features;

Buildings / Misc. structures (relevant to utilities viz. Pump houses, sumps. OHTs, Power houses, sub stations etc.), Water bodies, Land parcels, boundary walls, roads, culverts, storm water drains, fencing, vegetation (numbered trees) etc.

GE NW Vasco

GE Gmk

GE (P) Mandovi

Electrical utilities above ground viz Power Houses ( including creating schematic drawings to cover VCBs, OCBs, load break switches, capacitor panels, battery banks etc present inside power house) , Sub stations ( including creating schematic drawings to cover VCBs, OCBs, load break switches, capacitor panels, battery banks etc present inside power house ) , DG SETS, RMUs, 2/3/4/6 Pole structures, Overhead HT cables, Feeder Panels, Transformers and street lights

GE NW Vasco

GE Gmk

GE (P) Mandovi

Water supply network and Sewage Network above ground viz. Pump houses (including creating schematic drawings to cover pump sets, starter Panels, Chlorination plants etc. present inside the Pump house), valves and pipelines (up to 80 mm dia).

GE NW Vasco

GE Gmk

GE (P) Mandovi

HT cable network below ground and LT Cable network below ground up to the primary feeder after the distribution transformer using Cable and Pipe locators

GE NW Vasco

GE Gmk

GE (P) Mandovi

Water Pipeline and Sewage pipeline (greater than and including pipes of 80 mm dia) network below ground using Cable and Pipe locators

GE NW Vasco

GE Gmk

GE (P) Mandovi Note for Item no 1 to 5.03 : The scope of work includes acquiring attributes of all the sub systems viz. specifications, makes, year of installation, type, model no. material of construction, size, capacity etc. (and any other attribute as required by the engineer in charge) from the concerned engineer in Charge / by visual inspection / interaction with the manufacturer of the equipment's / maintenance records / user manuals of equipment's etc.

Mapping the survey results & creation of digital base maps for Area of Interest as per the below described features

Buildings / Misc. structures (relevant to utilities viz. Pump houses, sumps. OHTs, Power houses, sub stations etc.), Water bodies, Land parcels, boundary walls, roads, culverts, storm water drains, fencing etc.

GE NW Vasco

GE Gmk

GE (P) Mandovi

Electrical utilities above ground viz. Power houses , Sub Stations, DG sets, RMUs, 2/3/4/6 Pole structures, OH HT cables, feeder panels, Transformers and street lights.

GE NW Vasco

GE Gmk

GE (P) Mandovi

Water supply network and Sewage network above ground viz. Pump houses , valves and pipelines (greater than and including pipes of 80 mm dia).

GE NW Vasco

GE Gmk

GE (P) Mandovi

HT cable network below ground and LT Cable network below ground up to the primary feeder after the distribution transformer

GE NW Vasco

GE Gmk

GE (P) Mandovi

Water Pipeline and Sewage (greater than and including pipes of 80 mm dia) network below ground

GE NW Vasco

GE Gmk

GE (P) Mandovi

Development, Supply, Installation, testing and commissioning of GIS software including Customization of software interface and creation of editable platform for Naval Area under GE. The software shall have the following features. 1. Navigation tools (Zoom in, Zoom out, pan) 2. Identifier tool 3. Table of content 4. Feature or attribute search 5. Overview map 6. Editing of all the existing features (Point, line, Polygon) 7. Create new feature tool 8. Delete feature tool 9. Save changes tool 10. Data Model All the mapped sub systems e.g. cables, Pipes, pump houses, sub stations, transformers, valves, electric poles etc. shall have detailed attributes like, type, model no. material of construction, size, capacity, make, vintage etc. attached, in the form of user friendly drop down menus. a. There should be a facility to add maintenance related info like last date of repairs, cost of repairs. Nature of repairs carried out etc. to these sub systems. b. All the data of these sub systems should be easily retrievable in the form of simple drop down menus / any other manner. c. Updating the Digital maps by way of addition of pipelines, cables, transformers etc. should be easily possible. Make of GIS Software: ESRI - ArcGIS (Basic - Desktop Version)

GE NW Vasco

GE Gmk

GE (P) Mandovi

Supply, Installation Testing & Commissioning of COMPUTER having the following specifications: Processor: INTEL i7 processor, RAM: 8 GB RAM, Hard Disk: 1TB, 40" colour Monitor, Keyboard, Mouse and LAN port. Inbuilt software: Anti virus software and Windows 10 pro or better. Make: DELL / IBM / HP / Compaq /Samsung /Lenovo GE (NW) - 01, GE Gmk - 01, GE (P) Mandovi - 01

UPS of 1 KVA for back up of computer up to 30 mi. minimum. Make: APC / Luminous GE (NW) - 01, GE Gmk - 01, GE (P) Mandovi - 01

Making test pits in soft soil and then closing them again with the same soil for verification of utilities as per the requirement of the Engineer in Charge GE (NW) - 50, GE Gmk - 25, GE (P) Mandovi - 25

Creation of database Layers; attribute structure & designing the database for Area of Interest as per the below described features

(a) Buildings and Misc. structure (relevant to utilities viz. Pump houses, sumps. OHTs, Power houses, sub stations etc.), Water bodies, Land parcels, boundary walls, roads, culverts, storm water drains, fencing etc.

(i) GE NW Vasco

(ii) GE Gomantak

(iii) GE (P) Mandovi

(b) Electrical utilities above ground viz. Power houses , Sub Stations, DG sets, RMUs, 2/3/4/6 Pole structures, OH HT cables, feeder panels, Transformers and street lights.

(i) GE NW Vasco

(ii) GE Gomantak

(iii) GE (P) Mandovi

( c) Water supply network and Sewage network above ground viz. Pump houses , valves and pipelines (greater than and including pipes of 80 mm dia).

(i) GE NW Vasco

(ii) GE Gomantak

(iii) GE (P) Mandovi

(d) HT cable network below ground and LT Cable network below ground up to the primary feeder after the distribution transformer

(i) GE NW Vasco

(ii) GE Gomantak

(iii) GE (P) Mandovi

(e) Water Pipeline and Sewage (greater than and including pipes of 80 mm dia) network below ground

(i) GE NW Vasco

(ii) GE Gomantak

(iii) GE (P) Mandovi

Supply, Installation, testing and Commisioning of A3 size Colour Laser Printer Make: CANON/HP/Xerox/Samsung GE (NW) Vasco -01, GE Gomantak-01, GE (P) Mandovi-01

Creation of Central Command and Control Station

Supply, Installation, Testing & Commissioning of Engineering Control / Monitoring and Server System comprising of; HARDWARE 1) Air conditioned Rack mounted CENTRAL (REDUNDANT) SERVER SYSTEM having; a. Base Workstation INTEL Xenon processor E3-1220 v5(3.0GHz, 8MB/80W), 4 DIMMS / 2x8GB RAM / 2x1TB SATA 3.5” 7200Rpm/ 16x DVD +/-RW Drive - 02 nos, b.USB Optical Mouse / USB Keyboard / Windows 12 Server version OS/ Anti virus software / Restore software / 3 years Pro Support c.Monitor 24" d. Rack 18 U x 600Wx1000D with side panel - 02 Nos. / Front - rear Door - 02 Nos./ Caster - 01 set / Fans - 02 Nos. / Cable Manager - 01 No. e.VPN Router - 2 WAN and 4 LAN ports f. Accessories: LAN Cable, KVM Cable, connectors etc. g, UPS 3 KVA for minimum back up of 60 minutes along with powder coated sheet metal stand for batteries if required. SOFTWARE 2) Supply of Integrated Smart Station platform (multiple access) having modules for monitoring and / or control of various services viz. (i) Dual hot Redundant Scalable Integrated Smart Station platform (multiple access) having modules for monitoring and / or control of various services viz. a. Water Supply - Pumping & Distribution b. Electric Supply (i) HT and LT distribution (ii) Diesel Gensets (iii) Street Light

Supply, Installation, Testing and Commissioning of Ethernet Switch –24 port GBPS layer 2 manageable switch . Make: CISCO / HP/D-Link

Supply, Installation, Testing and Commissioning of Firewall Router with minimum 2 WAN ports and 4 LAN ports ,4 10/1000 RJ-45 ports, 2 10/1000 RJ-45 Internet port,Make: CISCO / HP/D-Link

Supply, Installation, Testing and Commissioning of a suitable OPC server for unlimited tags with MODBUS TCP/equivalent driver having provision for IOT gateway to exchange data between the PLC based panels and the system Make: Kepware, Matrikon

Supply, Installation, Testing and Commissioning of MQTT broker at the central server to service publish and subscribe requests from the OPC server and the web clients , Make : Hive, Mosquito, Eclipse, kepware

Supply, Installation, Testing and Commissioning of Apps for Android Operating Systems along with the design and development of APIs at server side using JAVA / dotnet technologies to provide data to Android apps required to fetch and display data like (a) Status of Level Sensors, Motorised Valves, Level Sensors (b) Energy Parameters of Pumps (c) Pressure Transducers (d) Any other parameter available in the system and as required by the Engineer in Charge (e) Facility to operate pumps and motorised valves either over GPRS network or by directly connecting to the serial / Ethernet port of the PLC using On The Go / any other suitable cable. With login and password facility and a minimum of 80 screens and having 25 concurrent licenses.

Supply, Installation, Testing and Commissioning of HTML Application connected to the Smart Stn Platform server having the following features i) 25 client licenses ii) Monitoring Platform in boot strap to create representation of existing infrastructure iii) JavaScript code to subscribe and publish to the MQTT broker at the server iv) Parse the response and display the data using HTML,CSS, Bootstrap v) Create online graphical trends . vi) Create database and use the database to create historical trends, dashboards and reports

Supply, Installation, Testing and Commissioning of Google Earth Interface including the following a) Design and development of KML/KMZ files on Google earth platform clearly marking the locations of all the Pump houses, Buildings, tanks and outdoor valves etc, which shall be visible to only those who are authorised to view the KML files. b) Design and development of HTML code to display important parameters like Pump Type, Mfr, valve size, attach image etc of each element c) Design and development of Web service in Dotnet/Java/Php at the main server to link to the Smart Stn Platform Database. d) Display the live status of elements by calling the web service through html code associated with each location. e) Authentication/sharing access to be granted by the admin of the system

Supply, Installation, testing and Commissioning of new wired broad band internet connection along with static IP on the Server computer including all expenses for communication, internet charges during entire liability period after the certified date of completion.

Local Control Center

Supply, Installation, Testing and Commissioning of Operator/Client Station with the following specifications; a.Intel Core i7, 8 GB DDR4 RAM, 1 TB Hard Disk Drive, Window 10 Pro / Windows operating system as recommeded by the Smart station Platform developer b.4 USB 2.0, 1 GB Ethernet, 1 HDMI, 1 VGA c.32 inch LED monitor, keyboard, mouse , anti virus software ( For Management and Control of Various Services under GE(NW) Vasco) (GE NW-02 JOB, GE GMK- 02 JOB, AGE(I) MANDOVI-1 JOB) Make: Dell/ HP/Lenovo

Supply, Installation, Testing and Commissioning of 75 inch LED monitor suitable for 24x7 application. Power: AC 100 - 240 V~ (+/- 10 %), 50/60 H Resolution: UHD (3840 x 2160) Operating temperature: 0 - 40 deg centigrade Humidity: 10-80% Built in Speakers Ports: HDMI 2.0, USB 2.0 x 2 Make NEC, Samsung, Panasonic, LG.

Supply, installation, testing and commissioning of A3 size monochrome Laser Printer; Print speed black: Up to 23 ppm (A4), upto 12 ppm (A3) Print technology: Laser, Processor speed: 600 MHz Connectivity: Hi-Speed USB 2.0 port Memory: 128 MB Functions: Print, Scan, Copy Power: AC 220 - 240V: 50/60Hz Make: HP / Epson / Cannon

EXTERNAL WATER SUPPLY

Provision Services for programming, configuration, tagging and Customisation of the Smart Station Platform with respect to Water Supply Management and Control of Various Services under GE(NW) Vasco, GE Gomantak and GE (P) Mandovi (GE NW-01 JOB, GE GMK- 01 JOB, AGE(I) MANDOVI-1 JOB) Note: The scope of work includes; 1. Configuring suitable username and password based security protocols for establishing privileges to restrict access / control of various modules of the system as required by the Engineer in Charge. 2. Making pre commissioning modifications, changes, alterations, amendments to UX/UI, screens, soft keys, logic of operation, report formats at site as per requirement of the engineer in charge. 3. Hands on, ON SITE Training on operation and report generation of Officers / site engineers / operators for period of 3 weeks after commissioning (during the first month of manning and operation). 4. Making any change, alteration, amendment, modification to the UX/UI, soft keys, logic of operation, report formats for a period of entire defect liability period from the date of trials, commissioning . These changes shall have to be carried out at site. 5. The above work shall be carried out by authorised representative of the Smart Station Platform developer.

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 02 Nos. Pumps, 02 Nos. Ultrasonic level sensors, 02 Nos. Pressure transmitter, 02 Nos. Priming valves, 02 Nos. Solenoid valves, 02 nos. flow meters, 01 no. Residual Chlorine sensor and transmitter, 01 no. pH and Turbidity sensor and transmitter and 04 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a) 36 nos Digital inputs / Outputs and 8 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 02 Nos. Pumps, 02 Nos. Ultrasonic level sensors, 02 Nos. Pressure transmitter, 02 Nos. Priming valves, 02 Nos. Solenoid valves and 14 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 72 nos Digital inputs / Outputs and 4 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 10 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 04 Nos. Pumps, 02 no CL dosing pumps, 02 Nos. Ultrasonic level sensors, 04 Nos. Pressure transmitter, 04 Nos. Priming valves, 04 Nos. Solenoid valve, 01 nos. flow meter and 05 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a) 56 nos Digital inputs / Outputs and 8 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 02 Nos. Pumps, 03 Nos. Ultrasonic level sensors, 02 Nos. Pressure transmitter, 02 Nos. Priming valves, 02 Nos. Solenoid valves, 01 no. flow meters, 01 no. Residual Chlorine sensor and transmitter, 01 no. pH and Turbidity sensor and transmitter and 25 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a).a) 100 nos Digital inputs / Outputs and 8 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 10 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 07 Nos Pumps, 05 Nos.2 nos Cl dozing pump,3 nos ultrasonic senser,6 nos Pressure transmitter, 05 Nos. Priming valves, 06 Nos Solenoid valves, 03 no. flow meters, 01 no. Residual Chlorine sensor and transmitter, 01 no. pH and Turbidity sensor and transmitter and 15 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a) 104 nos Digital inputs / Outputs and 12 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 10 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 02 Nos. Pumps, 01 Nos. Ultrasonic level sensors, 02 Nos. Pressure transmitter, 02 Nos. Priming valves, 02 Nos. Solenoid valves, 01 no. Flow meter and 04 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). a) 36 nos Digital inputs / Outputs and 4 Nos. analog inputs b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 02 Nos. Pumps, 02 no CL dosing pumps, 02 Nos. Ultrasonic level sensors, 02 Nos. Pressure transmitter, 02 Nos. Priming valves, 02 Nos. Solenoid valves, 01 no. Flow meter and 10 Nos. motorised valves.. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a) 64 nos Digital inputs / Outputs and 4 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 04 Nos. Pumps, 02 no CL dosing pumps, 05 Nos. Ultrasonic level sensors, 04 Nos. Pressure transmitter, 04 Nos. Priming valves, 04 Nos. Solenoid valves, 04 nos. Flow meters and 16 Nos. motorised valves... The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 96 nos Digital inputs / Outputs and 10 Nos. analog inputs..b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (i) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 10 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 02 Nos. Pumps, 02 no CL dosing pumps, 03 Nos. Ultrasonic level sensors, 02 Nos. Pressure transmitter, 03 Nos. Priming valves, 02 Nos. Solenoid valves, 01 no. Flow meter and 10 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 64 nos Digital inputs / Outputs and 6 Nos. analog inputs..b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 03 Nos. Pumps, 02 no CL dosing pumps, 01 Nos. Ultrasonic level sensors, 03 Nos. Pressure transmitter, 03 Nos. Priming valves, 03 Nos. Solenoid valves, 01 no. Flow meter and 13 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a).80 nos Digital inputs / Outputs and 4 Nos. analog inputs..b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 10 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 03 Nos. Pumps, 02 no CL dosing pumps, 02 Nos. Ultrasonic level sensors, 03 Nos. Pressure transmitter, 03 Nos. Priming valves, 03 Nos. Solenoid valves, 01 no. Flow meter and 14 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 84 nos Digital inputs / Outputs and 6 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 10 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 04 Nos. Pumps, 01 Nos. Ultrasonic level sensors, 04 Nos. Pressure transmitter, 04 Nos. Priming valves, 04 Nos. Solenoid valves, 01 no. Flow meter and 14 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 84 nos Digital inputs / Outputs and 6 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 10 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 02 Nos. Pumps, 02 no CL dosing pumps, 01 Nos. Ultrasonic level sensors, 02 Nos. Pressure transmitter, 02 Nos. Priming valves, 02 Nos. Solenoid valves, 02 nos. flow meters and 06 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 48 nos Digital inputs / Outputs and 4 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 02 Nos. Pumps, 01 Nos. Ultrasonic level sensors, 02 Nos. Pressure transmitter, 02 Nos. Priming valves, 02 Nos. Solenoid valves and 04 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 36 nos Digital inputs / Outputs and 2 Nos. analog inputs).b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 02 Nos. Pumps, 01 Nos. Ultrasonic level sensors, 01 No. Pressure transmitter, 02 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 24 nos Digital inputs / Outputs and 2 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 02 Nos. Pumps, 01 Nos. Ultrasonic level sensors, 02 Nos. Pressure transmitter, 02 Nos. Priming valves, 02 Nos. Solenoid valves, 01 Flow meter and 04 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 36 nos Digital inputs / Outputs and 4 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 02 Nos. Pumps, 02 Nos. Ultrasonic level sensors, 02 Nos. Pressure transmitter, 02 Nos. Priming valves, 02 Nos. Solenoid valves, 01 no. Flow meter and 06 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 42 nos Digital inputs / Outputs and 4 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 03 Nos. Pumps, 01 Nos. Ultrasonic level sensors, 03 Nos. Pressure transmitter, 02 Nos. Priming valves, 02 Nos. Solenoid valves, 01 no. Flow meter and 05 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 42 nos Digital inputs / Outputs and 4 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v)Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 04 Nos. Pumps, 02 no CL dosing pumps, 02 Nos. Ultrasonic level sensors, 04 Nos. Pressure transmitter, 04 Nos. Priming valves, 04 Nos. Solenoid valves, 01 no. Flow meter, 01 no. Residual Chlorine sensor and transmitter, 01 no. pH and Turbidity sensor and transmitter and 08 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 66 nos Digital inputs / Outputs and 10 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 03 Nos. Pumps, 02 Nos. Ultrasonic level sensors, 03 Nos. Pressure transmitter, 03 Nos. Priming valves, 03 Nos. Solenoid valves and 12 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 70 nos Digital inputs / Outputs and 6 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 10 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based outdoor type automation and Protection Panel suitable for control & monitoring the function of 01 Ultrasonic level sensor and 09 Nos.motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . ( c) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 42 nos Digital inputs / Outputs and 2 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based outdoor type automation and Protection Panel suitable for control & monitoring the function of 05 Nos.motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Operation of Motor Actuated Butterfly Valves (b) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a). 26 nos Digital inputs / Outputs b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installation, testing and commissioning of Programmable Logic Controller based outdoor type automation and Protection Panel suitable for control & monitoring the function of 01 Ultrasonic level sensor and 05 Nos.motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems (i) 01 no. PLC with follwing specifications; a).26 nos Digital inputs / Outputs and 2 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

Supply, Installing,Testing and Commissioning of Ultrasonic Level Transmitter Range : 0-5 metres Accuracy : 0.5 % minimum Supply Voltage : 24V dc Output : 4-20 mA Ultrasonic Frequency:75 kHz burst, rep. rate 96 ms Delay at Power-up: 1.5 seconds Temperature Effect: Uncompensated: 0.2% of distance/°C &Compensated: 0.02% of distance/°C Delay at Power-up: 1.5 seconds Resolution: 1.0 mm Output Response Time: 100 ms to 2300 ms Minimum Window Size: 20 mm Environmental Rating: Leakproof design is rated IEC IP67; NEMA 6P Operating Conditions: Temperature: –20 °C to 70 °C (–4 °F to 158 °F) Maximum relative humidity: 100% Indicators Green Power On LED: Indicates power is ON Red Signal LED: Indicates target is within sensing range, and the condition of the received signal Teach/Output indicator (bicolor Amber/Red): Amber – Target is within taught limits; Flashing Amber – Target is outside taught window limits; Red – Sensor is in TEACH mode Makes: Endress+Hauser / Banner / Krohne Marshal / Siemens Note: The scope of work includes supply and fixing of suitable mounting enclosure made out of MS, duly powder coated for safe and proper installation of the sensor.

Supply, Installation Testing & Commissioning of pressure Transmitter with following specification including necessary power pack for supply of DC : Power supply: 10-36 V DC Process connection: G ½ “ Enclosure: whether proof IP 65 Process temperature: -30 to 120 celcius Accuracy: 0.25 % Make: Danfoss / Siemens / E & H

Supply, Installation Testing & Commissioning of motor actuated ball valve suitable for 25 mm GI pipe for priming of pump including all necessary GI fittings with following specifications: Size: 25 mm Pressure rating: 10 kg / sq. cm. Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation Testing & Commissioning of direct acting type release solenoid valve for air release during priming; with follwing specifications : Size: 10 mm Pressure rating: 10 kg / sq. cm. Type: Normally closed Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation, Testing and Commissioning of Float type Point Level Sensor with the following specifications; Type: Magnetic Magnet: Ring type Switch: Reed Switch (Epoxy sealed) Connecting Cable: Teflon Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation, Testing & Commissioning of Motor Actuated Ball Valve consisiting of suitable single phase Actuator and ball valve of size 50 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Material of Ball: Stainless Steel Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Direct on valve Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation, Testing & Commissioning of Motor Actuated Ball Valve consisiting of suitable single phase Actuator and ball valve of size 50 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Material of Ball: Stainless Steel Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required. Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation, Testing & Commissioning of Motor Actuated Ball Valve consisiting of suitable single phase Actuator and ball valve of size 80 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Material of Ball: Stainless Steel Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Direct on valve Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation, Testing & Commissioning of Motor Actuated Ball Valve consisiting of suitable single phase Actuator and ball valve of size 80 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Material of Ball: Stainless Steel Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required. Make: EMTORK / HASEL HOFENER / SIEMENS/ HONEY WELLMake for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve made of SS- 304 , stem material SS-410, EPDM seat in butterfly valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 100 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Direct on valve Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve made of SS- 304 , stem material SS-410, EPDM seat in butterfly valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 100 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart phone to download logge data. Mounting :Extended type SS rod made out of SS-304 with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required. Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve made of SS- 304 , stem material SS-410, EPDM seat in butterfly valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 150 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Direct on valve Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve made of SS- 304 , stem material SS-410, EPDM seat in butterfly valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 150 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart honeto download logged data. Mounting :Extended type SS rod made out of SS-304 with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required. Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve made of SS- 304 , stem material SS-410, EPDM seat in butterfly valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 200 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Direct on valve Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve made of SS- 304 , stem material SS-410, EPDM seat in butterfly valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 200 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Extended type SS rod made out of SS-304 with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required. Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve made of SS- 304 , stem material SS-410, EPDM seat in butterfly valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 250 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required. Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply, Installation Testing & Commissioning of Motor Actuated Butterfly Valve made of SS- 304 , stem material SS-410, EPDM seat in butterfly valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 300 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater In built blue tooth transceiver with capability of pairing with any android based smart phone to download logged data. Mounting :Extended type SS rod made out of SS-304 with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required. Make for Actuator :Rotork / Honeywell / Rotex / Siemens/Schneider /Emtork (The torque of actuator shall be atleast 25% higher than the valve). Make for Valve: L&T / Honeywell / Siemens / Kirloskar / Schneider / Emtork.

Supply & fixing on wall/ laying in trench 2 x 2.5 sq mm PVC sheathed and PVC insulated, armoured, FRLS, copper cable. (Make: POLYCAB/FINOLEX/RR CABLE) ( for Panel supply)

Supply & fixing on wall/ laying in trench 4 x 2.5 sq mm PVC sheathed and PVC insulated, armoured, FRLS, copper cable. (Make: POLYCAB/FINOLEX/RR CABLE) (for solonide valve,pressure trasmitter,utrasonic senser)

Supply & fixing on wall/ laying in trench 6x 2.5 sq mm PVC sheathed and PVC insulated, armoured, FRLS, copper cable. (Make: POLYCAB/FINOLEX/RR CABLE)(for motorised valve)

Supply & fixing on wall/ laying in trench 5 pair 0.5 sq mm PVC sheathed and PVC insulated, armoured, FRLS, copper cable. (Make: POLYCAB/FINOLEX/RR CABLE/FSC) (for magnetic senser)

Supply and Laying / fixing on wall GI pipe light grade of 50 mm dia including all necessary nipples, bends, sockets, elbows etc. for cable protection. Make: Jindal / Swastik

Excavation in trenches not exceeding 1.5 Mtr wide and n.exc 1.5 Mtr in depth in hard/dense soil getting out and leveling of bottom surface to required level for laying of new pipeline all as specified.

Excavation in trenches not exceeding 1.5 Mtr wide and n.exc 1.5 Mtr in depth in soft/disintegrated rock getting out and leveling of bottom surface to required level for laying of new pipeline all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil all as specified.

Removing excavated material of any type of soil/soft rock from site to a distance not exceeding 50 Mtr away and depositing where directed not exceeding 1.5 Mtr above the starting point all as directed.

Supplying & Laying in trenches Clear Sand/m- Sand for cushioning under ground cable 8 cm below and 15 cm above complete in level all as specified. Note: Punned thickness only will be measured and paid.

Supplying & Laying precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm in trenches for protect to under ground cable complete all as specified.

Road cutting/ hard rock and not exceeding 1.5 Mtr wide and n.exc 1.5 Mtr in depth for laying of new pipe including making good the disturbed surface of road with PCC/Bituminous for same finish to match the original finish all as specified and directed by Engineer-in-charge.

Consrution of brick masonry valve chambe of size 1.2m x 1.2m x 1.2m (internal dimensions) (above GL 0.30m) suitable for fixing sluice valve, 15mm thick foundation using PCC 1:4:8 type D2 using 40mm graded stone aggregate over 15cm thick hard core of broken stone, 23cm thick brick walls built in CM (1:4), 15mm thick internal & external plaster finished even and smooth without using extra cement, 5mm thick MS cover plate on 50mm x 50mm x 6mm angle iron frame work embedded in PCC arrangement, hold fasts, suitable locking arrangement etc applying one coat of red oxide primer & two coats of sysnthetic enamel paint on steel surfaces including earth work & excavation in any type of soil including diposal of debris outside MD land complete all as specified and directed by Engineer-in-Charge.

Consrution of brick masonry valve chambe of size 1.0m x 1.0m x 1.0m (internal dimensions) (above GL 0.30m) suitable for fixing sluice valve, 15mm thick foundation using PCC 1:4:8 type D2 using 40mm graded stone aggregate over 15cm thick hard core of broken stone, 23cm thick brick walls built in CM (1:4), 15mm thick internal & external plaster finished even and smooth without using extra cement, 5mm thick MS cover plate on 50mm x 50mm x 6mm angle iron frame work embedded in PCC arrangement, hold fasts, suitable locking arrangement etc applying one coat of red oxide primer & two coats of sysnthetic enamel paint on steel surfaces including earth work & excavation in any type of soil including diposal of debris outside MD land complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing UPS / Inverter along of capacity 1.0 KVA with suitable battery bank with weatherproof enclosure with locking arrangement complete including electric connection from tapping and to PLC based control panel with armoured copper wire. Note: i) The scope of work includes integrating the UPS with the PLC based Panel so as to ensure that the Motorised valves are functional even in case of a power failure for a minimum of 6 hours Make: APC / Luminous / Numeric

Supply and Fixing UPS / Inverter along of capacity 1.5 KVA with suitable battery bank with weatherproof enclosure with locking arrangement complete including electric connection from tapping and to PLC based control panel with armoured copper wire. Note: i) The scope of work includes integrating the UPS with the PLC based Panel so as to ensure that the Motorised valves are functional even in case of a power failure for a minimum of 6 hours Make: APC / Luminous / Numeric

Supply and Fixing UPS / Inverter along of capacity 2.0 KVA with suitable battery bank with weatherproof enclosure with locking arrangement complete including electric connection from tapping and to PLC based control panel with armoured copper wire. (Installed at the slave Panels) Note: (i) The scope of work includes integrating the UPS with the PLC based Panel so as to ensure that the Motorised valves are functional even in case of a power failure for a minimum of 6 hours Make: APC / Luminous / Numeric

Supply and Fixing UPS along of capacity 3.0 KVA with suitable battery bank consisting with weatherproof enclosure with locking arrangement complete including electric connection from tapping and to PLC based control panel with armoured copper wire. (Installed at the slave Panels) Note: i) The scope of work includes integrating the UPS with the PLC based Panel so as to ensure that the Motorised valves are functional even in case of a power failure for a minimum of 6 hours Make: APC / Luminous / Numeric

Supply, Installation, testing and Commissioning of Wireless network IR Bullet Camera (Outdoor type) Main features: 1/2.9" 2MP CMOS image sensor Max 25/30fps @ 1080p H.264/H.264 Video compression Day/Night(ICR), AWB, AGC, BLC 3.6mm foxed lens IR ramge of 50 meters, IP 66, 64GB SD Card Class 10 Supports 3G/4G wireless Operating temperature: -10 to +60 degress centigrade Humidity: 10% to 90% RH Powwer Source 12V Dc (+/- 10%) Power consumption: Max 5W Make: CP Plus / SONY / AVtech

Supply, Installation, Testing and Commissioning of Full Bore Electro magnetic Flow Meter with 4-20 mA output on modbus, convertor and digital display along with Flow totaliser suitable for Line size of 80mm dia. Flow Sensor:, Type: Pulse DC excitation, Electrode : SS 316/Ha-C,Electrode type: Round Head Electrodes Meter Tube: SS Liner: Hard Rubber, Accuracy : ±0.5 % of MV inclusive of linearity, Flow Transmitter / Converter :Type : Micro processor based & Modular, Display language : English, Display Two line back lit LCD for indication of actual flow rate, forward, reverse &sum totalizer., Output : One current output (4 – 20 mA),Enclosure: Die cast Al. with polyurethane finish, Power Supply : 240 V AC, 50 Hz, The work includes modification of pipeline including for installation of flow meter such that the section of pipeline in which the flow meter is installed is always full., Note: The Flow meter shall be calibrated at FCRI / any Laboratory accredited by NABL or equivalent Make: Ritmeyer/ Krohne Marshall/Siemens/ ABB

Supply, Installation, Testing and Commissioning of Full Bore Electro magnetic Flow Meter with 4-20 mA output on modbus, convertor and digital display along with Flow totaliser suitable for Line size of 100mm dia. Flow Sensor:, Type: Pulse DC excitation, Electrode : SS 316/Ha-C,Electrode type: Round Head Electrodes Meter Tube: SS Liner: Hard Rubber, Accuracy : ±0.5 % of MV inclusive of linearity, Flow Transmitter / Converter :Type : Micro processor based & Modular, Display language : English, Display Two line back lit LCD for indication of actual flow rate, forward, reverse &sum totalizer., Output : One current output (4 – 20 mA),Enclosure: Die cast Al. with polyurethane finish, Power Supply : 240 V AC, 50 Hz, The work includes modification of pipeline including for installation of flow meter such that the section of pipeline in which the flow meter is installed is always full., Note: The Flow meter shall be calibrated at FCRI / any Laboratory accredited by NABL NABL or equivalent Make: Ritmeyer/ Krohne Marshall/Siemens/ ABB

Supply, Installation, Testing and Commissioning of Full Bore Electro magnetic Flow Meter with 4-20 mA output on modbus, convertor and digital display along with Flow totaliser suitable for Line size of 200mm dia. Flow Sensor:, Type: Pulse DC excitation, Electrode : SS 316/Ha-C,Electrode type: Round Head Electrodes Meter Tube: SS Liner: Hard Rubber, Accuracy : ±0.5 % of MV inclusive of linearity, Flow Transmitter / Converter :Type : Micro processor based & Modular, Display language : English, Display Two line back lit LCD for indication of actual flow rate, forward, reverse &sum totalizer., Output : One current output (4 – 20 mA),Enclosure: Die cast Al. with polyurethane finish, Power Supply : 240 V AC, 50 Hz, The work includes modification of pipeline including for installation of flow meter such that the section of pipeline in which the flow meter is installed is always full., Note: The Flow meter shall be calibrated at FCRI / any Laboratory accredited by NABL or equivalent Make: Ritmeyer/ Krohne Marshall/Siemens/ ABB

Supply, Installation, Testing and Commissioning of Full Bore Electro magnetic Flow Meter with 4-20 mA outpu on modbus, convertor and digital display along with Flow totaliser suitable for Line size of 250/300 mm dia. Flow Sensor:, Type: Pulse DC excitation, Electrode : SS 316/Ha-C,Electrode type: Round Head Electrodes Meter Tube: SS Liner: Hard Rubber, Accuracy : ±0.5 % of MV inclusive of linearity, Flow Transmitter / Converter :Type : Micro processor based & Modular, Display language : English, Display Two line back lit LCD for indication of actual flow rate, forward, reverse &sum totalizer., Output : One current output (4 – 20 mA),Enclosure: Die cast Al. with polyurethane finish, Power Supply : 240 V AC, 50 Hz, The work includes modification of pipeline including for installation of flow meter such that the section of pipeline in which the flow meter is installed is always full., Note: The Flow meter shall be calibrated at FCRI / any Laboratory accredited by NABL or equivalent Make: Ritmeyer/ Krohne Marshall/Siemens/ ABB

Supply and fixing of Mechanically Actuated Diaphragm based liquid Chlorine dosing pump with follwing specifications: MOC of Head : PP Max Flow: 160 LPH Min Flow: 16 LPH Max injection pressure: 8 KG/CM2 Max Suction capacity: 1.5 MWC Drive: 0.5 HP, 415 V, 3 Phase, 50 Hz, Class 'F', IP55, 1440 RPM, Non-FLP, IE2 ( energy efficient ) Motor The cope of work includes all staandard accessories in PVC: Pressure Relief Valve, Antisyphon Valve, "Y" Strainer etc. as required Make: Milton Roy / Declibac / Grundfos

Supply and fixing 300 liters PVC tank with inbuilt mixer / agitataor, shaft etc. for mixing if the additive (Sodium Hypochlorite / Altoch GP granules etc.).Consumables i.e. additivesviz. Sodium hypochlorite / Altoch GP etc. not included in the scope of work.)

Supply, Installation, testing and commissioning of Programmable Logic Controller based indoor type automation and Protection Panel suitable for control & monitoring the function of 04 Nos. Pumps, 02 no CL dosing pumps, 03 Nos. Ultrasonic level sensors, 04 Nos. Pressure transmitter, 04 Nos. Priming valves, 04 Nos. Solenoid valves, 02 nos. Flow meters, 01 no. Residual Chlorine sensor and transmitter, 01 no. pH and Turbidity sensor and transmitter and 22 Nos. motorised valves. The panel shall be fabricated with 1.6 mm thick CRCA sheet and properly powder coated to operate the water supply system and act as a user control and audiovisual indication system. It shall be floor mounted on properly powder coated sheetmetal stand. The Panel shall be capable of controlling and carrying out the below mentioned activities. (a) Water Level Sensing & Display. (b) Operation of Motor Actuated Butterfly Valves . (c) Single Phasing Prevention (d) Manual Mode Operation The PLC based Panel shall consist of the follwing sub systems

(i) 01 no. PLC with follwing specifications; a). 112 nos Digital inputs / Outputs and 10 Nos. analog inputs.b). 4 serial ports supporting open communication protocol. c). Programming software based on IEC to facilitate building of custom built function blocks. d. Expandable upto 256 DI / DOs (ii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features (a). 02 nos. serial ports and 01 no. USB port (b). Floating Point support (c). Built in RTC (d). Bar Graph and image (bmp, jpeg files) (e). Realtime and historical Trending, (f). Realtime and historical alarms, (iii) 01 no. SMPS of 10 A rating (Make: TELEMECANIQUE / NHP) (iv) 01 no. Suitable Surge Protection device suitable for 230V incoming supply . (Make: PHOENIX / TRINITY TOUCH) (v) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY)

EXTERNAL ELECTRIC SUPPLY

Provision of Services for programming, configuration, tagging and Customisation of the Smart Station Platform with respect to Electric Supply (HT, LT, DG Sets) Note: The scope of work includes; 1. Configuring suitable username and password based security protocols for establishing privileges to restrict access / control of various modules of the system as required by the Engineer in Charge. 2. Making pre commissioning modifications, changes, alterations, amendments to UX/UI, screens, soft keys, logic of operation, report formats at site as per requirement of the engineer in charge. 3. Hands on, ON SITE Training on operation and report generation of Officers / site engineers / operators for period of 3 weeks after commissioning.(during the first month of manning and operation). 4. Making any change, alteration, amendment, modification to the UX/UI, soft keys, logic of operation, report formats for a period of during entire defect liability period from the date of trials and commissioning . These changes shall have to be carried out at site. 5. The above work shall be carried out by authorised representative of the Smart Station Platform developer. (GE NW-01 JOB, GE GMK- 01 JOB, AGE(I) MANDOVI-1 JOB)

Supply, Installation, Testing, Commissioning & Programming of Floor Mounted powder coated Single Phase PLC based Outdoor type Panels of suitable size with powder coated metal stand for Remote Monitoring Control Panel suitable for Remote Monitoring of 26 nos. 11 KV VCBs, 04 nos. HT transformers (33/11 KV), and 01 no. distribution transformer The PLC Panel shall aquire the below mentioned signals from the VCB Panel; a. Circuit Breaker (ON & OFF status) b. Trip Circuit Healthy c. Spring charged d. Auto Tripped e. R,Y, B - indications f. Analog value of current for all three phases for all Modules. g. Analog value of voltage from the PT (wherever PT exists) The scope of work includes providing and installing Additional hardware / accessories in each VCB as per site requirement. The PLC based Panel shall consist of the follwing sub systems (i) 26 Nos.Energy meters with inbult mod bus communication port (Make: RISHABH/CONZERVE/L&T/SELEC) (ii) 01 no.PLC with follwing specifications; a. 198 nos Digital inputs / Outputs and 10 Nos. analog inputs b. 4 serial ports supporting open communication protocol c. Programming software based on IEC to facilitate building of custom built function blocks d. Expandable upto 256 DI / DOs (Make: GE Fanuc / Mitsubishi / Allen Bradley / Siemens / ABB) (iii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features a. 02 nos. serial ports and 01 no. USB port

b. Floating Point support c. Built in RTC d. Bar Graph and image (bmp, jpeg files) e. Realtime and historical Trending, f. Realtime and historical alarms, (iv) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (v) 01 no. Suitable Surge Protection device suitable for 230V incoming supply (Make: Phoenix / Trinity touch) (vi) Suitable no. of interposing relays of 2 A contact rating and suitable voltage rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY) (vii) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of during entire defect liability period from the date of completion. (ix) Communication between PLC Panel and Smart Station Platform shall be using DNP 3.0 protocol To be installed at 33 KV S/S at INS HANSA & 33 KV S/S NOFRA

Supply, Installation, Testing, Commissioning & Programming of Floor Mounted powder coated Single Phase PLC based Outdoor type Panels of suitable size with powder coated metal stand for Remote Monitoring Control Panel suitable for Remote Monitoring of 05 Nos of VCBs, 01 no distribution transformer and 01 no. LT panel consisting of 13 nos feeders and 2 nos transformers The PLC Panel shall aquire the below mentioned signals from the VCB Panel; a. Circuit Breaker (ON & OFF status) b. Trip Circuit Healthy c. Spring charged d. Auto Tripped e. R,Y, B - indications f. Analog value of current for all three phases for all Modules. g. Analog value of voltage from the PT (wherever PT exists) The scope of work includes providing and installing Additional hardware / accessories in each VCB as per site requirement. The PLC based Panel shall consist of the follwing sub systems (i) 17 Nos.Energy meters with inbult mod bus communication port (Make: RISHABH/CONZERVE//L&T/SELEC) (ii) 01 no.PLC with follwing specifications; a. 42 nos Digital inputs / Outputs and 4 Nos. analog inputs b. 4 serial ports supporting open communication protocol c. Programming software based on IEC to facilitate building of custom built function blocks d. Expandable upto 256 DI / DOs (Make: GE Fanuc / Mitsubishi / Allen Bradley / Siemens / ABB) (iii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features a. 02 nos. serial ports and 01 no. USB port

b. Floating Point support c. Built in RTC d. Bar Graph and image (bmp, jpeg files) e. Realtime and historical Trending, f. Realtime and historical alarms, (iv) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (v) 01 no. Suitable Surge Protection device suitable for 230V incoming supply (Make: Phoenix / Trinity touch) (vi) Suitable no. of interposing relays of 2 A contact rating and suitable voltage rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY) (vii)Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. (viii)GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of during entire defect liability period from the date of completion. (ix) Communication between PLC Panel and Smart Station Platform shall be using DNP 3.0 protocol To be installed at Varnapuri S/S

Supply, Installation, Testing, Commissioning & Programming of Floor Mounted powder coated Single Phase PLC based Outdoor type Panels of suitable size with powder coated metal stand for Remote Monitoring Control Panel suitable for Remote Monitoring of 03 nos VCB and 1 no. LBS The PLC Panel shall aquire the below mentioned signals from the VCB Panel; a. Circuit Breaker (ON & OFF status) b. Trip Circuit Healthy c. Spring charged d. Auto Tripped e. R,Y, B - indications f. Analog value of current for all three phases for all Modules. g. Analog value of voltage from the PT (wherever PT exists) The scope of work includes providing and installing Additional hardware / accessories in each VCB as per siterequirement. The PLC based Panel shall consist of the follwing sub systems (i) 04 Nos.Energy meters with inbult mod bus communication port (Make: RISHABH/CONZERVE//L&T/SELEC) (ii) 01 no.PLC with follwing specifications; a. 26 nos Digital inputs / Outputs b. 4 serial ports supporting open communication protocol c. Programming software based on IEC to facilitate building of custom built function blocks d. Expandable upto 256 DI / DOs (Make: GE Fanuc / Mitsubishi / Allen Bradley / Siemens / ABB) (iii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features a. 02 nos. serial ports and 01 no. USB port

b. Floating Point support c. Built in RTC d. Bar Graph and image (bmp, jpeg files) e. Realtime and historical Trending, f. Realtime and historical alarms, (iv) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (v) 01 no. Suitable Surge Protection device suitable for 230V incoming supply (Make: Phoenix / Trinity touch) (viii) Suitable no. of interposing relays of 2 A contact rating and suitable voltage rating (vi) Suitable no. of interposing relays of 2 A contact rating and suitable voltage rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY) (vii)Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of during entire defect liability period from the date of completion. (ix) Communication between PLC Panel and Smart Station Platform shall be using DNP 3.0 protocol To be installed at RMU Outdoor type & GE NW (VASCO)

Supply, Installation, Testing, Commissioning & Programming of Floor Mounted powder coated Single Phase PLC based Outdoor type Panels of suitable size with powder coated metal stand for Remote Monitoring Control Panel suitable for Remote Monitoring of 01 nos VCB and 03 no. LBS The PLC Panel shall aquire the below mentioned signals from the VCB Panel; a. Circuit Breaker (ON & OFF status) b. Trip Circuit Healthy c. Spring charged d. Auto Tripped e. R,Y, B - indications f. Analog value of current for all three phases for all Modules. g. Analog value of voltage from the PT (wherever PT exists) The scope of work includes providing and installing Additional hardware / accessories in each VCB as per site requirement. The PLC based Panel shall consist of the follwing sub systems (i) 04 Nos.Energy meters with inbult mod bus communication port (Make: RISHABH/CONZERVE//L&T/SELEC) (ii) 01 no.PLC with follwing specifications; a. 20 nos Digital inputs / Outputs b. 4 serial ports supporting open communication protocol c. Programming software based on IEC to facilitate building of custom built function blocks d. Expandable upto 256 DI / DOs (Make: GE Fanuc / Mitsubishi / Allen Bradley / Siemens / ABB) (iii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features a. 02 nos. serial ports and 01 no. USB port

b. Floating Point support c. Built in RTC d. Bar Graph and image (bmp, jpeg files) e. Realtime and historical Trending, f. Realtime and historical alarms, (iv) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (v) 01 no. Suitable Surge Protection device suitable for 230V incoming supply (Make: Phoenix / Trinity touch) (vi) Suitable no. of interposing relays of 2 A contact rating and suitable voltage rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY) (vii)Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. (viii)GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of during entire defect liability period from the date of completion. (ix) Communication between PLC Panel and Smart Station Platform shall be using DNP 3.0 protocol To be installed at Jivanti S/S & NAD S/S

Supply, Installation, Testing, Commissioning & Programming of Floor Mounted powder coated Single Phase PLC based Outdoor type Panels of suitable size with powder coated metal stand for Remote Monitoring Control Panel suitable for Remote Monitoring of 03 nos. VCBs and 02 nos. LBS Sub Station, 03 nos distribution Transformers and 03 nos. LT panel consisting of 05 nos feeders each The PLC Panel shall aquire the below mentioned signals from the VCB Panel; a. Circuit Breaker (ON & OFF status) b. Trip Circuit Healthy c. Spring charged d. Auto Tripped e. R,Y, B - indications f. Analog value of current for all three phases for all Modules. g. Analog value of voltage from the PT (wherever PT exists) The scope of work includes providing and installing Additional hardware / accessories in each VCB as per site requirement. The PLC based Panel shall consist of the follwing sub systems (i) 05 Nos.Energy meters with inbult mod bus communication port (Make: RISHABH/CONZERVE//L&T/SELEC) (ii) 01 no.PLC with follwing specifications; a. 52 nos Digital inputs / Outputs and 12 Nos. analog inputs b. 4 serial ports supporting open communication protocol c. Programming software based on IEC to facilitate building of custom built function blocks d. Expandable upto 256 DI / DOs (Make: GE Fanuc / Mitsubishi / Allen Bradley / Siemens / ABB) (iii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features a. 02 nos. serial ports and 01 no. USB port

b. Floating Point support c. Built in RTC d. Bar Graph and image (bmp, jpeg files) e. Realtime and historical Trending, f. Realtime and historical alarms, (iv) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (v) 01 no. Suitable Surge Protection device suitable for 230V incoming supply (Make: Phoenix / Trinity touch) (vi) Suitable no. of interposing relays of 2 A contact rating and suitable voltage rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY) (vii)Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. (viii)GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of during entire defect liability period from the date of completion. (ix) Communication between PLC Panel and Smart Station Platform shall be using DNP 3.0 protocol To be installed at INS Gomantak

Supply, Installation, Testing, Commissioning & Programming of Floor Mounted powder coated Single Phase PLC based Outdoor type Panels of suitable size with powder coated metal stand for Remote Monitoring Control Panel suitable for Remote Monitoring of 01 nos. VCBs and 01 no. distribution Transformers and LT panel consisting of 11 nos feeders The PLC Panel shall aquire the below mentioned signals from the VCB Panel; a. Circuit Breaker (ON & OFF status) b. Trip Circuit Healthy c. Spring charged d. Auto Tripped e. R,Y, B - indications f. Analog value of current for all three phases for all Modules. g. Analog value of voltage from the PT (wherever PT exists) The scope of work includes providing and installing Additional hardware / accessories in each VCB as per siterequirement. The PLC based Panel shall consist of the follwing sub systems (i) 12 Nos.Energy meters with inbult mod bus communication port (Make: RISHABH/CONZERVE//L&T/SELEC) (ii) 01 no.PLC with follwing specifications; a. 14 nos Digital inputs / Outputs and 04 Nos. analog inputs b. 4 serial ports supporting open communication protocol c. Programming software based on IEC to facilitate building of custom built function blocks d. Expandable upto 256 DI / DOs (Make: GE Fanuc / Mitsubishi / Allen Bradley / Siemens / ABB) (iii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features a. 02 nos. serial ports and 01 no. USB port

b. Floating Point support c. Built in RTC d. Bar Graph and image (bmp, jpeg files) e. Realtime and historical Trending, f. Realtime and historical alarms, (iv) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) 01 no. Suitable Surge Protection device suitable for 230V incoming supply (Make: Phoenix / Trinity touch) (vi) Suitable no. of interposing relays of 2 A contact rating and suitable voltage rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY) (vii)Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. (viii)GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of during entire defect liability period from the date of completion. (ix) Communication between PLC Panel and Smart Station Platform shall be using DNP 3.0 protocol To be installed at 2DT HT S/S

Supply, Installation, Testing, Commissioning & Programming of Floor Mounted powder coated Single Phase PLC based Outdoor type Panels of suitable size with powder coated metal stand for Remote Monitoring Control Panel suitable for Remote Monitoring of 1 no VCB The PLC Panel shall aquire the below mentioned signals from the VCB Panel; a. Circuit Breaker (ON & OFF status) b. Trip Circuit Healthy c. Spring charged d. Auto Tripped e. R,Y, B - indications f. Analog value of current for all three phases for all Modules. g. Analog value of voltage from the PT (wherever PT exists) The scope of work includes providing and installing Additional hardware / accessories in each VCB as per site requirement. The PLC based Panel shall consist of the follwing sub systems (i) 03 Nos.Energy meters with inbult mod bus communication port (Make: RISHABH/CONZERVE//L&T/SELEC) (ii) 01 no.PLC with follwing specifications; a. 14 nos Digital inputs / Outputs and 04 Nos. analog inputs b. 4 serial ports supporting open communication protocol c. Programming software based on IEC to facilitate building of custom built function blocks d. Expandable upto 256 DI / DOs (Make: GE Fanuc / Mitsubishi / Allen Bradley / Siemens / ABB) (iii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features a. 02 nos. serial ports and 01 no. USB port

b. Floating Point support c. Built in RTC d. Bar Graph and image (bmp, jpeg files) e. Realtime and historical Trending, f. Realtime and historical alarms, (iv) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (v) 01 no. Suitable Surge Protection device suitable for 230V incoming supply (Make: Phoenix / Trinity touch) (vi) Suitable no. of interposing relays of 2 A contact rating and suitable voltage rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY) (vii)Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. (viii)GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers.The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Communication between PLC Panel and Smart Station Platform shall be using DNP 3.0 protocol To be installed at MANDOVI

Supply, Installation, Testing, Commissioning & Programming of Floor Mounted powder coated Single Phase PLC based outdoor type Panels of suitable size with powder coated metal stand for Remote Monitoring of LT Panel with 3 feeders and transformer The PLC Panel shall aquire the below mentioned signals from the LT Panel; b. Analog value of current for all three phases of each feeder c. Analog value of voltage for all three phases of each feeder The scope of work includes providing and installing Additional hardware / accessories in each LT Panel as per site requirement. The PLC based Panel shall consist of the follwing sub systems (i) 03 Nos.Energy meters with inbult mod bus communication port (Make: RISHABH/CONZERVE//L&T/SELEC) (ii) 01 no.PLC with follwing specifications; a.25 nos Digital inputs / Outputs and 02 Nos. analog inputs b. 4 serial ports supporting open communication protocol c. Programming software based on IEC to facilitate building of custom built function blocks d. Expandable upto 256 DI / DOs (Make: GE Fanuc / Mitsubishi / Allen Bradley / Siemens / ABB) (iii) 01 no. HMI - 7" (min) Graphical Touch screen mluticolour having following minimum features a. 02 nos. serial ports and 01 no. USB port b. Floating Point support c. Built in RTC dt Bar Graph and image (bmp, jpeg files) e. Realtime and historical Trending, f. Realtime and historical alarms, (iv) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP)

(v) 01 no. Suitable Surge Protection device suitable for 230V incoming supply (Make: Phoenix / Trinity touch) (vi) Suitable no. of interposing relays of 2 A contact rating and suitable voltage rating (Make: OEN / OMRON / IDEC / ALLEN BRADLEY) (vii)Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Communication between PLC Panel and Smart Station Platform shall be using DNP 3.0 protocol To be installed at various distribution transformers

Note: (for Item no 15.01 to 15.17 ) 1.PLC shall be provided with conformal coating on internal components for protection against effects of coastal area. 4. PLC based Panels shall be provided with suitable cooling fan and tubelight. 5. All PLC Panels shall have 10% extra digital Inputs / Outputs prewired in the Panel as spares / future expnsion. Make of Control Panel: GE Fanuc/Siemens/Schneider/ABB Automation / Emerson / Mitsubishi.

Supply, Installation, Testing and commissioning of CLAMP ON TYPE Current Transformers with suitbale primary rating as per site requirment and secomdary rating of 1A/5A as per site requirement Make: Veritek / YHDC / Automatic Electric / CG

Supply, Installation, Testing and commissioning of temperature sensor with thermocouple for Transformer Oil and transformer winding suitable for mounting on exsiting transformer. Technical Specifications:Input 24VDC / 12 VDC, Output 4-20mA / 0-10V / 0-5V DC . Make: CALCON / RADIX / RDS / SIEMENS / HONEYWELL

Supply, Installation, Testing and commissioning of discrete Oil level sensor and Transmitter with minimum 03 levels to generate user settable crtitical level alarms"critical" per the requirement of the Engineer in charge and with suitable mounting bracket for exisitng transformer. Technical specifications:Input 24 VDC / 12 VDC, Sensor type - Magnetic Make: SPINK / VEGA / CALCON / RDS / SIEMENS / TECHTROL

Supply and Fixing of 4* 0.5 sq mm PVC sheathed and PVC insulated Cu flexible unarmored Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 4* 1.5 sq mm PVC sheathed and PVC insulated Cu flexible unarmored Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 6* 0.5 sq mm PVC sheathed and PVC insulated Cu flexible unarmored Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 6* 2.5 sq mm PVC sheathed and PVC insulated Cu flexible unarmored Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 12* 0.5 sq mm PVC sheathed and PVC insulated Cu flexible unarmored Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of flexible PVC conduit 25 mm for Cable protection Make: Asian / Precision / Diamond

Rigid non-metallic PVC conduit inclusive of junction boxes (junction/terminal), tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.Make: Asian / Precision / Diamond

M&L for Plain cement concrete 1:3:6 Type C1 using 20mm graded aggregate laid in foundations/valve chamber filling, support of pipe laying and mass concrete etc all as specified and directed.

Dismantling of existing Manual / AMF Panel for repair/addition/alteration & Refixed at sme location after repair complete as directed by the Engineer in charge ( ref item no- 15.63 )

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick, over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 625 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 1000A,4 Pole with add on block and Mechanical interlock, MCCB 1000A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase ; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE(NW) - 01 (H1 Hanger)

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick, over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 400 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 630 A,4 Pole with add on block and Mechanical interlock, MCCB 630 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE(NW) - 01 (Magzine & Missile Bay), GE GMK-01

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick, over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 380 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 630 A,4 Pole with add on block and Mechanical interlock, MCCB 630 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE(GMK) - 01NAD

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick,, over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 350 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 630 A,4 Pole with add on block and Mechanical interlock, MCCB 630 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence to be installed at GE(NW) - 01 (EHU AC Plant NAYJ)

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick, over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 320 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 500 A,4 Pole with add on block and Mechanical interlock, MCCB 500 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE(NW) - 02 (S.H.Simulator Power House 02)

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick,over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 250 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 400 A,4 Pole with add on block and Mechanical interlock, MCCB 400 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence to be installed at GE(NW) - 01 (OLD BSF Sonobuoy)

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted, double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick, over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 200 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 320 A,4 Pole with add on block and Mechanical interlock, MCCB 320 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE(NW) - 02 (NAYJ TU Hanger, Nofra Power House) GE GMK 01 (JIvanti)

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick,over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 160 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 320 A,4 Pole with add on block and Mechanical interlock, MCCB 320 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE(NW) - 01 (BSF Area)

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick, over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 125 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 200 A,4 Pole with add on block and Mechanical interlock, MCCB 200 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE (NW) - 02 (Area power House, Nofra Power House, GE (P) Mandovi 01 (NWC)

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted, double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick,, over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 100 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 200 A,4 Pole with add on block and Mechanical interlock, MCCB 200 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. To be installed at GE (NW) - 02 (Mangoor PH, Varnapuri PH), GE GMK-04 (Jivanti 04), GE (P) Mandovi 01 (Mandovi Power House)

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick,over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 75 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 125 A,4 Pole with add on block and Mechanical interlock, MCCB 125 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE (NW) - 01 (BMF PH)

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted, double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick,over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 60/65 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 125 A,4 Pole with add on block and Mechanical interlock, MCCB 125 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE(NW) - 06, GE Gmk - 05, GE (P) Mandovi - 01

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick,over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 35/40 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 63 A,4 Pole with add on block and Mechanical interlock, MCCB 63 A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE (NW) - 02 (33 KV PH, Hansa Vihar PH), GE Gmk - 01,

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted, double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick,over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 25/30 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 50 A,4 Pole with add on block and Mechanical interlock, MCCB 50A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE (NW) - 03 (200LDG PH, GCA PH, DCRA PH)

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick, over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 15/20 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 32 A,4 Pole with add on block and Mechanical interlock, MCCB 32A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE (NW) -10 Nos

Supply, Installation, testing, programming and Commissioning of SCADA compatible AMF panel, factory made outdoor type, free floor mounted , double door ,both side opening, totally enclosed fabricated out of CRCA steel 3.15 mm thick, over an angle iron base frame made out of suitable angle iron, hinged front panel door for easy accessibility duly powder coated complete, internal wiring with suitable size copper conductor cable lugs, ferrules and cable glands for external connection complete suitable for 7.5 KVA capacity DG set with bypass arrangement complete The PLC based Panel shall consist of the follwing sub systems

(i) Contactors (02 nos.) of 16 A,4 Pole with add on block and Mechanical interlock, MCCB 16A (03 nos.) with auxiliary contacts, to indicate tripping of respective phase; Make ABB/Schneider/Telemecanique, (ii) suitable no. of LED type indicating lamps 220 volts of make ABB/Schneider/Telemecanique (iii) Suitable No.of ON/OFF/Reset push buttons with element of make ABB/Schneider/Telemecanique (iv) Control MCB SP 4 amps C curve 10KA of make ABB/Schneider/Telemecanique (v) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (vi) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (vii) Customized Magnetic type point level discrete level sensor (02 levels) with suitable mounting arrangement compatible to diesel environment and existing Diesel Tank. (viii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability period from the date of completion. (ix) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (x) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the controller with a suitable PLC gateway and shall transmit data like electrical parameters, oil, in realtime to the central SCADA . Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 sec of its occurrence. to be installed at GE (NW) - 01 (cortalim)

Supply, Installation, testing and Commissioning of SCADA compatible Monitoring panel, factory made outdoor type, free floor mounted/ wall mounted , double door , totally enclosed fabricated out of CRCA steel 3.15 mm thick,,with below mentioned specifications:- (i) SCADA compatible Microprocessor based Gateway/PLC with suitable inputs/outputs, communication drivers for GPRS communication (communication shall be over DNP 3.0 protocol) RS 232 port etc. Make Schneider/Mitsubushi/GE Fanuc.. (ii)Customised Magnetic type point level discrete level sensors (02 levels) with suitable mounting arrangement compatible to diesel environment and exisiting Diesel Tank ( iii) GPRS enabled wireless dual SIM card based communication module supporting DNP 3.0 protocol with suitable antenna using 02 different service providers. The module should be programmed to automatically toggle between the two service providers based on the actual signal strength available. The quoted cost shall inlcude the cost of communication for a period of entire defect liability periods from the date of completion. (iv) Micro controller based intelligent AMF relay to monitor parameters viz. voltage, current, frequency, energy & all engine parameters (v) Battery with battery charger for powering the panel for a minimum 60 minutes in case of supply failure. Make: COMAP / WOODWARD. (vi) 01 no. SMPS of 5 A rating (Make: TELEMECANIQUE / NHP) (xi) Communication between Panel and Smart Station Platform shall be using DNP 3.0 protocol The modem shall be linked to the AMF controller with thorugh the GPRS gateway and shall transmit data like electrical parameters, at preset interval of time not less than 15 secs to the central SCADA station. Critical data like alarm conditions and event occurrence shall also be transmitted to the central SCADA within 15 secs of its occurrence. GE (NW) - 15, GE Gmk - 14, GE (P) Mandovi - 04

Supply and Fixing of 4* 1.5 sq mm PVC sheathed and PVC insulated, armoured, FRLS, copper cable. (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 6* 2.5 sq mm PVC sheathed and PVC insulated, armoured, FRLS, copper cable. (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 10* 1.5 sq mm PVC sheathed and PVC insulated, armoured, FRLS, copper cable. (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 25 sq mm X 4 core aluminum armoured Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 35 sq mm X 3.5 core aluminum armoured Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 50 sq mm X 3.5 core aluminum armoured Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 70 sq mm X 3.5 core aluminum armoured Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 95 sq mm X 3.5 core aluminum armoured Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 120 sq mm X 3.5 core aluminum armoured Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 150 sq mm X 3.5 core aluminum armoured Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 240 sq mm X 3.5 core aluminum armoured Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply and Fixing of 300 sq mm X 3.5 core aluminum armoured Cable (Make: POLYCAB/FINOLEX/RR CABLE)

Supply, Installation, testing and Commissioning of Wireless network IR Bullet Camera (Outdoor type) Main features: 1/2.9" 2MP CMOS image sensor Max 25/30fps @ 1080p H.264/H.264 Video compression Day/Night(ICR), AWB, AGC, BLC 3.6mm foxed lens IR ramge of 50 meters, IP 66, 64GB SD Card Class 10 Supports 3G/4G wireless Operating temperature: -10 to +60 degress centigrade Humidity: 10% to 90% RH Powwer Source 12V Dc (+/- 10%) Power consumption: Max 5W Make: CP Plus / SONY / AVtech

SERVICES FOR MANNING AND OPERATION

(a) Manning and operation of the SCADA based centralised monitoring and control water supply pumping and distribution system with trained manpower during 1st 11 months after completion of the work as described below. 1st Shift (04.00 Hrs to 12.00 Hrs) ,GE(Vasco) and GE(Gomantak) (i) 02 Nos ITI qalified SCADA operators with knowledge of operation of the system on SCADA (ii) 02 Nos ITI qalified techncians trained by manufacturer of the PLC based control panel with knowledge of operation of the system on SCADA and trouble shooting with respect to all sub sysytems viz., computers, all software, motorised and solenoid valves, pressure transmitters, ultrasonic and magnetic level sensors, communication equipment etc., of the automated system (02 nos helper at Local Command and control centre)

(b) 2nd 11 months after completion of the work of 16.01 above

(c) 3rd 11 months after completion of the work of 16.02 above

(d) 4th11 months after completion of the workof 16.03 above

(e) 5th 11 months after completion of the workof 16.04 above

(f) 6th 5 months after completion of the workof 16.05 above

(a) Manning and operation of the SCADA based centralised monitoring and control water supply pumping and distribution system with trained manpower during 1st 11 months after completion of the work as described below. 1st Shift (04.00 Hrs to 12.00 Hrs) AGE(I) Mandovi (ii) 01 Nos ITI qalified techncians trained by manufacturer of the PLC based control panel with knowledge of operation of the system on SCADA and trouble shooting with respect to all sub sysytems viz., computers, all software, motorised and solenoid valves, pressure transmitters, ultrasonic and magnetic level sensors, communication equipment etc., of the automated system (01 no helper at Local Command and control centre)

(b) 2nd 11 months after completion of the work of 16.07 above

(c) 3rd 11 months after completion of the work of 16.08 above

(d) 4th 11 months after completion of the workof 16.09 above

(e) 5th 11 months after completion of the workof 16.10 above

(f) 5th 5 months after completion of the workof 16.11 above

(a) Manning and operation of the SCADA based centralised monitoring and control water supply pumping and distribution system with trained manpower during 1st 11 months after completion of the work as described below. 2 nd Shift (12.00 Hrs to 20.00 Hrs) ,GE(Vasco) and GE(Gomantak) (i) 02 Nos ITI qalified SCADA operators with knowledge of operation of the system on SCADA (ii) 02 Nos ITI qalified techncians trained by manufacturer of the PLC based control panel with knowledge of operation of the system on SCADA and trouble shooting with respect to all sub sysytems viz., computers, all software, motorised and solenoid valves, pressure transmitters, ultrasonic and magnetic level sensors, communication equipment etc., of the automated system (02 nos helper at Local Command and control centre)

(b) 2nd 11 months after completion of the work of 16.13 above

(c) 3rd 11 months after completion of the work of 16.14 above

(d) 4th 11 months after completion of the workof 16.15 above

(e) 5th 11 months after completion of the workof 16.16 above

(f) 5th 5 months after completion of the workof 16.17 above

(a) Manning and operation of the SCADA based centralised monitoring and control water supply pumping and distribution system with trained manpower during 1st 11 months after completion of the work as described below. 2 nd Shift (12.00 Hrs to 20.00 Hrs) , AGE(I) Mandovi (i) 01 Nos ITI qalified techncians trained by manufacturer of the PLC based control panel with knowledge of operation of the system on SCADA and trouble shooting with respect to all sub sysytems viz., computers, all software, motorised and solenoid valves, pressure transmitters, ultrasonic and magnetic level sensors, communication equipment etc., of the automated system (01 no. helper at Local Command and control centre )

(b) 2nd 11 months after completion of the work of 16.19 above

(c) 3rd 11 months after completion of the work of 16.20 above

(d) 4th 11 months after completion of the workof 16.21 above

(e) 5th 11 months after completion of the workof 16.22 above

(f) 5th 5 months after completion of the workof 16.23above

(a) Manning and operation of the SCADA based centralised monitoring and control water supply pumping and distribution system with trained manpower during 1st 11 months after completion of the work as described below. 3 rd Shift (20.00 Hrs to 04.00 Hrs) ,GE(Vasco) and GE(Gomantak) (i) 02 Nos ITI qalified techncians trained by manufacturer of the PLC based control panel with knowledge of operation of the system on SCADA and trouble shooting with respect to all sub sysytems viz., computers, all software, motorised and solenoid valves, pressure transmitters, ultrasonic and magnetic level sensors, communication equipment etc., of the automated system (01 no. at each of the Local Command and control

(b) 2nd 11 months after completion of the work of 16.25 above

(c) 3rd 11 months after completion of the work of 16.26 above

(d) 4th 11 months after completion of the workof 16.27 above

(e) 5th 11 months after completion of the workof 16.28 above

(f) 5th 5 months after completion of the workof 16.29 above

Manning and operation of the SCADA based centralised monitoring and control water supply pumping and distribution system with trained manpower during 1st 11 months after completion of the work as described below. 3 rd Shift (12.00 Hrs to 20.00 Hrs) , AGE(I) Mandovi (i) 01 Nos ITI qalified techncians trained by manufacturer of the PLC based control panel with knowledge of operation of the system on SCADA and trouble shooting with respect to all sub sysytems viz., computers, all software, motorised and solenoid valves, pressure transmitters, ultrasonic and magnetic level sensors, communication equipment etc., of the automated system (01 no. at each of the Local Command and control

(b) 2nd 11 months after completion of the work of 16.31 above

(c) 3rd 11 months after completion of the work of 16.32 above

(d) 4th 11 months after completion of the workof 16.33 above

(e) 5th 11 months after completion of the workof 16.34 above

(f) 5th 5 months after completion of the workof 16.35 above

SERVICES OF COMPREHENSIVE MAINTENANCE

Comprehensive maintenance comprising of routine, preventive & breakdown maintenance of Scada water supply & Electric supply installed , comprising of all devices and accessories through out 12 months on all days including sundays & holidays for a period of 02 years after expiry of defects liability period (i.e. 36 months after certified completion of main work) all as specified and directed and as shown below: at Vasco Area

(a) 1st year after expiry of defect liability period.

(b) 2 nd year after completion of the work of 17.02 above

(b) The Contractor shall Employ minimum ITI qualification from Govt Recognised institute with adequate knowledge & minimum 2 years experience in maint/operation of Scada system. The operator must competent to carry out the minor maint all as directed.

(c) Contractor shall pay the wages to the employees through e-payment i.e Adhaar linked bank accounts (credit to their bank account). Engineer-in-charge shall ensure that e-payment made to employees and their wages shall not be less than minimum wages fixed by state Govt or Central Govt whichever is more. Monthly e-banking statement shall be furnished by the contractor to the Engr-in-charge and the same shall be kept in record duly verified.

(e) The contractor shall maintain all the registers under various labour law rules, 2017 and shall be produced to the Engineer-in-Charge as well as officers detailed by central labour department.

(f) Each shift duration shall be 8 hours & duty timing will be decided by Engr-in-Charge.

(g) The unit rate quoted shall deemed to be included for cost of labour for daily routine maintenance for trouble free functioning of installation.

(h) In case of any abnormal noise/ complaint the plant should be put off and same should be brought to the notice of Engr-in-charge.

(i) The operator employed by the contractor shall be capable of carrying out minor repair/ maintenance & should have well experience in installation as applicable.

(l) The rate quoted shall deemed to be inclusive of safety gear & required tools for minor maintenance. In case of failure to provide tools kit & safety kit (spanner sets, hand gloves), a penalty of Rs 3000/- per area of Vasco/ Mandoi/ Gomantak will be recovered and levied

(m) The Contractor shall not employ same tradesman continuously for more than 11 months during the Contract period.

(n) The contractor shall provide 02 uniforms to each operator and design of uniform shall be got approved. In case of failure, a penalty of Rs 2000/- per uniform per month till compliances will be levied and recovered from their dues.

(p) The Contractor shall maintain proper records of all kinds of daily, weekly, monthly, quarterly, half yearly and yearly or whatsoever maintenance is carried out during contract period in a binded book / register and shall obtain the signature of Engineer-in-Charge every fortnightly.

(q) The contractor shall provide board at proper location near each installations duly writting the name of operators and Mobile Numbers shifwise.

(r ) In case of non function of Scada system panel recovery @ 3000 per day shall be effected 24 hrs after the defect is noticed or notified either in writing or through a social media message by GE or his rep.

(s) Any defect in to a programmable logic controller (PLC) i.e., changes in ladder logic of programme, changes in operational timing etc., Any changes in Command control station software and related software i.e., change in report format, changes in operational screens, creation of soft keys ,broadband with static IP at Central Command Control Centre, broadband at the local Command Control Centre and GPRS enabled data cards used in all PLC based panel related to scope of work. etc. shall be considered as outstanding defect & Panel charge will be applicable as above in note (r ) multiple defect occuring at different pump houses , substations , sewage installations ,DG sets shall be charged seperately @ Rs 3000/- per day

(t) Contractor shall provided 01 No Graduate Service Engineer trained by manufacturer/OEM of the PLC based control panel with knowledge of operation of the system on SCADA and trouble shooting as and when required with respect to all sub sysytems viz., computers, all software, motorised and solenoid valves, pressure transmitters, ultrasonic and magnetic level sensors, communication equipment etc., of the automated system.(at Central Command and Control Center)

Mechatronics Systems Private Limited

Laxmi Civil Engineering Services Pvt Ltd