SITC of 7.5 HP Submersible pump in the existing 150 mm bore well at BSF campus Koirengei of 182 Bn BSF campus under SHQ BSF CIOps Manipur

Amount

Earthing with GI earth pipe 4.5 meter long ,40mm dia including accessories and providing masonry enclosure with cover plate locking arrangement and watering pipe etc with charcoal/coke and salt as required

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring /cable as required

Supplying installation testing and commissioning of 7.5 HP/5KW submersible motor pump set of 65mm outlet size , 12 stage,(head-132-12 Mtr,0-440 LPM) suitable for 3 phase ,415 volt 50 HZ etc as required(with 3 meter submersible cable)

Supplying and lowering /laying of 65mm dia medium class ISI mark GI pipes with 65mm socket at both end connection etc as required

SITC out door type double door distribution panel made of 2 mm thick CRCA sheet of size 1000mm X 600mm X 300mm deep having 100 Amp 4nos Aluminium bus bar and following accessories mounted thereon. The panel shall be openable from front side and also consists of angle iron frame of size 1000mm X 600mm X 300mm with 4 legs of 600mm long made of angle 35 X 35 X 4mm thick angle iron . the inside and outside painting should be done with supper quality smoke grey synthetic enemelled paint with two or more coats (i) 100 Amp ,4pole,25 ka MCCB ,415 Volt, 50 Hz - 01 nos (ii) Automatic star delta starter for 3 phase ,415 Volt 50 Hz 7.5 HP /5 KW submersible motor pump set

Supplying and laying of 3 core 4sq mm flat copper cable for the motor and starter connection connection etc as required

Supplying and laying of 3.5 X 35 sq mm XLPE insulated and PVC Sheathed armoured cable aluminium conductor 1.1 KV Grade conf to IS: 7098/1998, direct in ground including excavation ,sand cushioning, protective covering and refilling the trench etc as required but excluding sand cushioning and protective covering

Supplying and lowering /laying of 40 mm dia medium class ISI GI pipes for submersible cable protection under ground as required

Providing and fixing of 8 mm dia steel rope for support of submersible pump