Bituminous re-carpeting of all the internal bituminous roads at the estate area such as R3, R4, R8, R9, R10, R11, R12, R13, R14, R15, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26 and R27, etc. along with repairing of pot-holes within the roads by

Amount

Bituminous re-carpeting of all the internal bituminous roads at the estate area such as R3, R4, R8, R9, R10, R11, R12, R13, R14, R15, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26 and R27, etc. along with repairing of pot-holes within the roads by filling water and bituminous macadam, etc. at O. F. estate, Bhusawal.

7.5 cm thick (compacted thickness) WBM with coarse aggregates of grading 2 (63 to 40mm size) spread, rolled and consolidated to gradient and camber required, type of aggregate Granite, trap or Basalt.

7.5 cm thick (compacted thickness) WBM with coarse aggregates of grading 3 (50 to 20mm size) spread, rolled and consolidated to gradient and camber required, type of aggregate Granite, trap or Basalt.

Preparing surfaces by brushing with wire brushes For BBM of removing caked, mud, etc. sweping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt, etc, on unsurfaced water bound macadam surface.

Surface dressing by spraying evenly paving bitumen at 20 kg per 10 Sq M, blinding with 12.5 mm stone chipping @0.14 Cu.M per 10 Sq.M and rolling to required gradient and camber, M & L.

Coarse aggregates, grading 3, 50 to 20mm size, type of aggregate granite, trap or basail.

Preparing black top surfaces by brushing with wire |brushes for removing caked, mud, etc. sweping with rooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt, etc. on black top suface

M&L applying evenly a Tack coat with paving bituminous primer at 10 kg per 10 Sq.M.

Premix paving bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness less than 75mm). Binder content Paving bitumen any penetration.

Bituminous premix asphaltic dense concrete 25mm consolidated thickness with 5.5% paving bitumen binder content by weight of total mix, rolled and compacted to required camber and gradient complete.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per |sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) Spec. No.: As directed

M&L applying evenly a Tack coat with paving bituminous primer at 5 kg per 10 Sq.M.

PARAG BUILDCON LLP (BID ID -772778)