REPAIRS TO FENCING AT VARIOUS LOCATIONS AT ARAKKONAM

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work, masonry etc including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh, any type, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed

Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Surface dressing in soft/ loose soil n exc 15 cm deep complete all as specified and as directed.

M & L for plain cement concrete type D2 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for plain cement concrete type C1 1:3:6 (20 mm graded aggregate) as in foundations, filling and mass concrete for embedding the fencing posts complete all as specified and as directed.

M & L for providing precast cement concrete type B0 1:2:4 (using 12.5 mm graded aggregate) set in cement mortar 1:4 as in columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rageblocks, bonders(for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers,weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and as directed.

S & F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S & F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for walling random rubble, brought upto courses well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.

All as per item No.11 here-in-before but except stone.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, with maximum depression on face from straight edge held against the dressed surface n exc 40 mm, as specified, of random rubble walling, uncoursed or brought upto courses; complete all as specified and as directed.

Material and labour for flush pointing to random rubble mansonry, uncoursed or brought upto courses in CM 1:3 complete all as specified and as directed.

Material and labour for old size brick work with sub class 'B' bricks straight or curved on plan exc 6m mean redius built in CM 1:4 complete all as specified and as directed.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed..

Material and labour for cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregates) for edging/coping complete all as specified and as directed.

S & F mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed..

All as per item No.18 here-in-before but except steel

S & F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed..

All as per item No.20 here-in-before but except steel

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type n exc 4 kg/sqm complete all as specified and as directed.

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Fixing only Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

S & F Mild steel bars 6 to 8 mm dia round bars Fe 410 (Gde E-250) quality A, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, dia of neck 5 to 10 mm complete all as specified and as directed.

Taking down cement plaster or concrete etc., including racking out joints hacking for key scrubbing down with water etc., complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in floors, aprons etc complete all as specified and as directed.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and as directed.

Supply and fix in repairs 600mm dia razor blade galvanised barbed concertina coil having minimum weight of 8Kg (+) or (-) 5% per coil of 2.6mm dia wire streched to a length of 5m to 6m as in fencing to steel posts and to another coil/ MS nibs including fixing with special galvanised fasterners such as J clips, C clips, U clips complete all as specified and as directed. Note: After streching the coil, the length of the compound wall on which it has been streched shall be considered for measurement.

Supply and fix in repairs 1050mm dia razor blade galvanised barbed concertina coil having minimum weight of 15Kg (+) or (-) 5% per coil of 2.6mm dia wire streched to a length of 6m to 8m as in fencing to steel posts and to another coil/ MS nibs including fixing with special galvanised fasterners such as J clips, C clips, U clips complete all as specified and as directed. Note: After streching the coil, the length of the compound wall on which it has been streched shall be considered for measurement.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted over a coat of primer complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide prime complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description,n exc 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide prime complete all as specified and as directed.

Material and labour for preparing old decorated surfaces of walls and applying one coat of colour wash complete all as specified and as directed.

Material and labour for one coat of synthetic enamel painting on old painted steel surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed.

R.P.TRADERS

RK CONSTRUCTION

D.KUMAR

N SRINIVASAN

CRJ ENTERPRISES

Green Ray Technologies

D Subramani and Sons