WBPWD/SEHEC/SKHED/NIQ21/19-20

Amount

SUB STATION WORK

SUB-HEAD 1--SITC OF 6 KV VCB PANEL & 6/0.415 KV TRANSFORMERS & MAIN PANEL

Supply & delivery of Oil type Indoor type Corrugated Tank design 630 KVA 6kV/433V, 3 phase, 50 Hz, Dyn11, KNAN type Sealed type Copper wound Transformer with all accessories i/c first filling of filtered dehydrated K Class natural Ester Oil bioTransol (as per IS 16659) as per detailed specification attached . [Make : SCHNEIDER/ CGL/ VOLTAMP (Baroda)]

Installation & commissioning of 6 KV/ 433 volt, 630 KVA distribution transformer incl. carriage to the substation building within a lead of 30mtr by placing in position and fixing after leveling fitting all components, connecting, checking & set of all instrument, relays according to requirement as instructed by the EIC incl. S&F base channels etc.

Making testing arrangement and submitting the test report for high voltage testing of specified voltage incl. checking & testing of all HT / LT equipments by authorized firm of Directorate of Electricity & commissioning the installation after obtaining the Approval of Directorate of Electricity.The scope shall be also included the necessary approval from Authority also.

Supply & fixing 75x45 mm "C" channel having length of 2 mtr. each channel incl. nuts, bolts and washer etc.

Modification & Rectification with overhauling & Servicing of 3 Panels H. T. Gear & Replacement of Controll wiring defective spare parts as required as per direction of E. I. C. including supply and fixing with connection of triple ratio 200-100-100/5-5Amps 3 Nos. and 100-50-50/5-5Amps 15VA resin cast CT - 6 Nos with 3 core Metering: Class 0.5 Protection: Class 1 instead of existing CT's. Testing of relay tripping, timing synchronising & proper tripping by primary/Secondary injection set etc as required for 3 nos. HT VCB switch gear for O/C, E/F and master trip relays.

Disconnection & dismantling the HT / LT cable from transformers at sub-station and dismantling the existing 2 nos 150 KVA Transformer from its position and shifting from Sub station to other place as per direction of EIC as required.

SITC of floor mounted Indoor type extensible cubical MV switchboard,fabricated by CPRI approved panel maker having compartmentalized design, fabricated out of 14 SWG ( 2.0 mm ) nominal thickness CRCA sheet steel,front and back openable, hinged, single shuttered, with incoming ACBs & Outgoing MCBS and all accessories as per size, design & drawing to be approved by EIC and conforming to IS with latest modification and as per detail specification attached ( uploaded in the specification section) [LT MAIN PANEL IN THE SUBSTATION]

SUB HEAD II - HT/ LT CABLING IN SUBSTATION

Supplying of 11KV (UE) Grade XLPE Aluminium conductor, PVC sheathed, armoured cable conforming to IS 7098, of earthed system of following size.[ From Supplier HT Gear to Consumer HT Gear and to Transformer]. [ Make : Nicco / Gloster/Polycab/Havells/RR Kable/Crystal ]

3 Core x 300 Sq.mm

Making heatshrinkable joints indoor type to the ends of the following XLPE HT cable at the transformer end as well as at the VCB ends supplying with necy. jointing kits (Raycham), sockets, sleeves, anti-corrossive paste, wires, solders, jointing compounds, rubber sheets etc. incl. supplying of necy. tools & tackeles for crimping the end sockets, soldering irons & making of glands at the both end of the cable as per directions of EIC

3 Core x 300 Sq.mm

Laying of 1 No. 11KV (UE) Grade XLPE Aluminium conductor, PVC sheathed, armoured cable confirming to IS 7098, of earthed system of following size in the existing Masonary Open Duct as required.

3 Core x 300 Sq.mm 11KV XLPE HT cable

Supply & Drawing 1.1 KV Grade 7 Core 1.5 sq.mm PVC Armoured Copper Cable from Transformer WT relay to VCB WT relay for Power & Control Supply as per direction of EIC

S & F suitable angle/flat iron bracket for holding the HT/LT cables in proper place with all necy. materials as required and rigidly fixed as per direction of the EIC.

Supplying of one number 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable ( Armoured ) conforming to IS: 7098 / 1988 with its latest amendment of following size. [ Make Nicco / Gloster/ Finolex/Crystal/Polycab / RR Kabel]

4Core 25 Sq. mm [ MAIN LT PANEL TO SUBSTATION TPNDB]

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish including removing the rubbish

From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below including finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

a) 4Core 25 Sq. mm

SUB HEAD III - EARTHING

S& laying 240 sq. mm. single core multistrand PVC insulated flexible Cu wire in suitable size of PVC flexible pipe (reinforced) from nutral earth busbar to transformer point as required (for Transformer /Generator neutral earthing) including Socketing both sides by Cu Socket.

Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe

Extra treatment of soil by using salt & charcoal for plate electrode as to G.S.

Supply & fixing earth busbar of galvanized (Hot dip) MS flat 65 mm x 8 mm on wall having clearence of 6 mm from wall incl. providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Insulating the 65 x 8 mm M.S. flat incl. S&F black heat shrink PVC sleeves etc. The PVC tube sleeve to be inserted on the GI flat and heat shrinked by heating apparatus by skilled technician carefully without damaging the PVC sleeve as per direction of the EIC

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar incl. S & F 50 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

S & F special type earth electrode clamp made of GI flat with nuts, bolts,, washer etc. suitable for 80 mm dia GI pipe earth.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

50mm dia

Supplying & fixing reinforced PVC flexible pipe Protection with necessary fittings and jointing metarials as required

50mm dia

SUB HEAD - IV ( SAFETY EQUIPMENT )

Providing & fixing danger plates made of mild steel at least 2mm thick & vitreous enameled white on both sides & with inscription in signal red colour on front side as required.

a) High Voltage - size 250mm x 200mm

b) Medium Voltage - size 200mm x 150mm

Providing and fixing carbon dioxide (CO2) type fire extinguishers conforming to IS 15222-2002 and cylinders fully charged of following capacity(4.5 Kg ) [Make - Fire Shield/ Ceasefire]

Supply and fixing of foam fire extinguishers conforming to IS 4989-2006, Portable type 9 lit capacity hanged on wall with bracket complete as required. [Make - Fire Shield/ Ceasefire]

Supply and fixing safety instruction chart in word duly framed with 5mm thick glass as required (approx. Front area 1.20 sq.mt.)

Providing of set of 4 nos. 9.5 litre capacity GI bucket painted in post office red colour with prior coat of red-oxide paint and written with white paint 'FIRE' and mounted on MS angle iron frame with bracket and suitable base of appropriate size & capacity I/c filling sand etc.

Providing First Aid Box as approved by St. John Ambulance Brigade / Indian Red Cross conforming to IS 13115-1991.

Supply and fixing shock treatment chart duly mounted on a wooden frame with 5mm thick glass as reqd. (approximate front area 1.20 sq.metre).

Providing of rubber mat 2 mtrs Length x 1 m. wide and 12mm thick to withstand 15 KV dielectric strength as per IS 15652-2006.

Providing of rubber mat 2 mtrs Length x 1 m. wide and 6mm thick to with stand 3.3 KV dielectric strength as per IS 15652-2006.

SUB-HEAD VI--DISTRIBUTION WIRING for SUB STATION

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand )

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS.

2+10 Way[ Legrand ]

2+6 Way[ Legrand ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [ Make -Legrand ]

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [Finolex/ Polycab/ Havells/ RR Kabel] partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal &vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] [Finolex/ Polycab/ Havells/ RR Kabel] in 19 mm bore, 3 mm thick polythen pipe with all accessories embedded in wall (through rigid PVC pipe on ceiling) to light / fan / call bell points as per GS with following average run

Ave run 10 Mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish

On Board

Cutting Channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipe of following diameter as per GS. [Dalda/Dolly/AKG/Bardia/Narayani]

19 mm dia 3 mm thick

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire [Finolex/ Polycab/ Havells/ RR Kabel] of the following sizes in the prelaid polythene pipe as per GS. [Finolex/ Polycab/ Havells/ RR Kabel]

2x(2.5 sqmm)+1x(1.5 sqmm)[ for 16 A Power plug ]

2x (6 sqmm) + 1x (4 sqmm) [ For 32 A Outlet ]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc including supplying sockets, tapes. [ 9 / F 5 ]

2x(2.5 sqmm)+1x(1.5 sqmm)

2x (6 sqmm) + 1x (4 sqmm)

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes(in mm ) flushed in wall as per GS

Supply & Fixing 240 V, 16A, plug socket with separate 16 A Piano key type switch on sheet metal switch board embedded in wall as per GS

Supply & Fixing Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board as per GS

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification as per GS.

Supply of Exhaust fans complete with all accessories having the following Model / Cat No. ( Make -EPC Heavy Duty)

12"( 300mm ) Speed 920 RPM

Fixing only exhaust fan after making holes in wall as per GS

Supply & Fixing louver shutter ( Aluminum)on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS

Supply & Fixing Timer for controlling of exhaust fan fixed on wall in MS Box with top cover (L&T Micon225/equivalent Legrand).

S&D of 240V LED luminaire complete with all accessories as follows:-

Single industrial box (thick ness of box should not be less than 22 SWG) type luminaire with CRCA body (Make :- Philips -TMC 501P 1xT-LED22W P3241/ Equivalent product of Crompton/Wipro having similar specification in all respect). incl S&D 1x 18 watts 4 ft LED tube lamp (Make:- Philips, Cat - Mas LED tube 1200 mm 18W865 T8 I 2100 Lumen PC Body/ Equivalent product of Crompton/Wipro having similar specification in all respect)

Twin industrial box (thick ness of box should not be less than 22 SWG) type luminaire with CRCA body (Make :- Philips -TMC 501P 2xT-LED22W P3241/ Equivalent product of Crompton/Wipro having similar specification in all respect). incl S&D 2x 18 watts 4 ft LED tube lamp (Make:- Philips, Cat - Mas LED tube 1200 mm 18W865 T8 I 2100 Lumen PC Body/ Equivalent product of Crompton/Wipro having similar specification in all respect)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp incl. S&F EI conduit “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting by S&F 2x24/0.20 mm flexible copper wire of 1.10 mtr. length and mending good damages to original finish and painting etc.

DIFFERENT PANEL, SFU OF BUILDING

[NORMAL LT PANEL FOR CASUALTY BUILDING] SITC of floor mounted Indoor type extensible cubical MV switchboard,fabricated by CPRI approved panel maker having compartmentalized design, fabricated out of 14 SWG ( 2.0 mm ) nominal thickness CRCA sheet steel,front and back openable, hinged, single shuttered, with incoming ACBs & Outgoing MCCB, SFU and all accessories as per size, design & drawing to be approved by EIC and conforming to IS with latest modification and as per detail specification attached ( uploaded in the specification section)

[DG PANEL FOR CASUALTY BUILDING] SITC of floor mounted Indoor type extensible cubical MV switchboard,fabricated by CPRI approved panel maker having compartmentalized design, fabricated out of 14 SWG ( 2.0 mm ) nominal thickness CRCA sheet steel,front and back openable, hinged, single shuttered, with incoming & Outgoing ACB,MCCB, SFU etc and all accessories as per size, design & drawing to be approved by EIC and conforming to IS with latest modification and as per detail specification attached ( uploaded in the specification section)

[SUB PANEL FOR HDU & ITU AREA] SITC of floor mounted Indoor type extensible cubical MV switchboard,fabricated by CPRI approved panel maker having compartmentalized design, fabricated out of 14 SWG ( 2.0 mm ) nominal thickness CRCA sheet steel,front and back openable, hinged, single shuttered, with incoming & Outgoing MCCB, SFU etc and all accessories as per size, design & drawing to be approved by EIC and conforming to IS with latest modification and as per detail specification attached ( uploaded in the specification section)

[SUB PANEL FOR OT AREA] SITC of floor mounted Indoor type extensible cubical MV switchboard,fabricated by CPRI approved panel maker having compartmentalized design, fabricated out of 14 SWG ( 2.0 mm ) nominal thickness CRCA sheet steel,front and back openable, hinged, single shuttered, with incoming & Outgoing MCCB and all accessories as per size, design & drawing to be approved by EIC and conforming to IS with latest modification and as per detail specification attached ( uploaded in the specification section)

[SUB PANEL FOR 3 NOS LIFT] SITC of floor mounted Indoor type extensible cubical MV switchboard,fabricated by CPRI approved panel maker having compartmentalized design, fabricated out of 14 SWG ( 2.0 mm ) nominal thickness CRCA sheet steel,front and back openable, hinged, single shuttered, with incoming & Outgoing M/S and all accessories as per size, design & drawing to be approved by EIC and conforming to IS with latest modification and as per detail specification ( uploaded in the specification section)

[FEEDER PILLER BOX] SITC of Double door outdoor type Distribution Feeder Pillar box conforming to Indian Standard IS : 5039-1969 with latest amendments,suitable for use on 3 phase 4 wire, 400/440 Volts 50 Cycles A.C. as per detailed specification ( uploaded in the specification section).

S&F of 415V.,32A. TPN Main Switch in S.S. enclosure with 3 nos. 32A. HRC Fuse fixed on angle iron frame on wall as per direction of EIC

&F of 415V., 250A. TPN Main Switch in S.S. enclosure with 3 nos. 250A. HRC Fuse incl S&F 2 nos. cable end box on angle iron frame on wall as per direction of EIC

S&F of 415V., 315A. TPN Main Switch in S.S. enclosure with 3 nos. 315A. HRC Fuse incl S&F 2 nos. cable end box on angle iron frame on wall as per direction of EIC

S/F 415V, 315A 4-Pole ON load C/O Switch in SS enclosure on angle iron frame on wall incl necessary connection by suiltible copper wires as per direction of E.I.C

SUPPLY & LAYING OF CABLES

Supply of 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Nicco / Gloster/ Finolex/Crystal/Polycab / RR Kabel]

4 Core 150 Sq. mm ( For AC Chiller panel)

4 Core 185 Sq. mm (From Main panel to Feeder panel)

4 Core 240 Sq. mm (For DG AMF panel to Emergency panel)

4 Core 300 Sq. mm (For Main cable)

Laying of the following Cables in existing covered masonery trench incl. taking out RC covers, setting them in order as and mending good the damages to GS.

2 nos 4 Core 300 Sq. mm

2 nos 4 Core 240 Sq. mm

2 nos 4 Core 185 Sq. mm

2 nos 4 Core 150 Sq. mm

Laying of the following Cables on existing cable tray including binding by S&F binding materials as per direction of the EIC

2 nos 4 Core 300 Sq. mm

2 nos 4 Core 240 Sq. mm

2 nos 4 Core 185 Sq. mm

2 nos 4 Core 150 Sq. mm

Laying of the following Cables through prelaid UPVC / G.I. protection pipe as to GS.

2 nos 4 Core 300 Sq. mm

2 nos 4 Core 240 Sq. mm

2 nos 4 Core 185 Sq. mm

2 nos 4 Core 150 Sq. mm

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS.

4 Core 300 Sq. mm

4 Core 240 Sq. mm

4 Core 185 Sq. mm

4 Core 150 Sq. mm

Supply and grouting Legrand make cablofil wire-mesh type heavy duty cable trays ( 300 MM CABLE TRAY) made of 8 SWG anodized steel wires both for cross-members and longitudinal members (4 nos.) to form a tray having 12” width for cradling portion 3” crowning at both end. (Make - Legrand, Cablofil cable tray)

Horizontal run

ladder type for vertical run

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

50mm dia

80mm dia

SUPPLY OF LIGHT FITTINGS

(FOR CB BLOCK)

S&D of 240V LED luminaire complete with all accessories as follows:-

Single industrial box (thick ness of box should not be less than 22 SWG) type luminaire with CRCA body (Make :- Philips -TMC 501P 1xT-LED22W P3241/ Equivalent product of Crompton/Wipro having similar specification in all respect). incl S&D 1x 18 watts 4 ft LED tube lamp (Make:- Philips, Cat - Mas LED tube 1200 mm 18W865 T8 I 2100 Lumen PC Body/ Equivalent product of Crompton/Wipro having similar specification in all respect)

Twin industrial box (thick ness of box should not be less than 22 SWG) type luminaire with CRCA body (Make :- Philips -TMC 501P 2xT-LED22W P3241/ Equivalent product of Crompton/Wipro having similar specification in all respect). incl S&D 2x 18 watts 4 ft LED tube lamp (Make:- Philips, Cat - Mas LED tube 1200 mm 18W865 T8 I 2100 Lumen PC Body/ Equivalent product of Crompton/Wipro having similar specification in all respect)

Supply of recess mounted 2' x 2' LED luminaries .

Philips Model RC 380B LED 36S-6500 G4 L60W60 PSU OD/ Equivalent product of Crompton/ Wipro/ Jaquar having similar specification in all respect

Supply of recess mounted round LED luminaries.

Philips Model Ultima DN092B LED10S 6500 PSU WH/ Equivalent product of Crompton/ Wipro / Jaquar having similar specification in all respect

Supply of surface mounted round LED luminaries.

Jaquar Model Neve Surface LNVE02R0125C/ Equivalent product of Crompton/ Wipro/ Philips having similar specification in all respect

SUPPLY OF FAN

(FOR CB BLOCK)

Supply of 240 V 1200 mm (48") sweep A.C. ceiling fan (Five Star rated) without regulator having safety wire , P2 type capacitor incl. down rod, canopy & fan blades etc. complete in all respect. [Make: Crompton HS+ or HB+ / Orient Energy star (wood finish) / USHA Striker ]

Supply of 240V, 56" (1400 mm) Sweep, A.C. Ceiling Fan (Make -Crompton -Aura metalic / Orient- Gratia) without Regulator, having safety wire, P2 type capacitor incl. Down Rod, Canopy, Fan Blades etc. complete in all respect.

Supply of 230 V 85W 18" (450mm) 4 (four) Blades Industrial type Air-Circulator Pedestal Fan complete with all accessories such as P2 type capacitor, Regulator, Cord and 15 Amp. 3-pin Top (Make - EPC Electrical Pvt. Ltd., Heavy Duty)

Supply of 230V AC, 18" (450 mm) sweep whole metal-body wall bracket fan (Make- EPC Electricals Pvt. Ltd.) complete with all accessories with P-2 type burst-proof capacitor.

Supply of 230V, 85W 18" (450mm) 4 (four) Blades Industrial type Bracket Fan complete with all accessories grouted on wall incl. Making necy. Connection as per direction of the EIC (Make - E.P.C. Electrical Pvt. Ltd., Heavy Duty) for lift m/c room & waiting area.

Supply of Exhaust fans complete with all accessories having the following Model / Cat No. ( Make -EPC Heavy Duty)

12"( 300mm ) Speed 920 RPM

9"( 225mm ) Speed 920 RPM

Fixing only exhaust fan after making holes in wall as per GS

Supply & Fixing louver shutter ( Aluminum)on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS

SITC OF UPS

SITC of 10KVA True Online Double Conversion IGBT based UPS system with Advanced DSP based Technology having minimum output power factor 0.8 with 415V Three phase input & 240V single phase output and following minimum accessories. a) Inbuilt / Separate isolation Transformer with cabinet at input side. b) Paralleling kit with patch cord c) Modbus card d) Suitable size Battery rack e) Total minimum 12096VAH SMF battery for each UPS to provide 30mins. Battery backup at Full load. Make : Amararaja Quanta / Exide Power Safe. [ The Agency should provide 3 (three) years warranty & regular maintanance from the date of completion for UPS with isolation Transformer & Batteries.] [ VERTIV make Liebert ITA 10KVA / APC Model No. Easy UPS 3S 10KVA / Numeric Digital HP MAX 10 KVA]

SITC of 20KVA True Online Double Conversion IGBT based UPS system with Advanced DSP based Technology and having minimum output power factor 0.8 with 415V Three phase input & 415V Three phase output, minimum Efficiency 90% and following minimum accessories. a) in built/Separate isolation Transformer with cabinet b) Paralleling kit with patch cord c) Modbus card d) Suitable size Battery rack e) Total minimum VAH 24000 (SMF battery) for each UPS to provide 30mins. Battery backup at Full load. Make : Amararaja Quanta / Exide Power Safe [ The Agency should provide 3 (three) years warranty & regular maintanance from the date of completion for UPS with isolation Transformer & Batteries.] [ VERTIV make Liebert ITA 20KVA / NUMERIC make Digital HP i33 20KVA/ APC Model No E3SUPS20KVA ]

SITC of 40KVA True Online Double Conversion IGBT based UPS system with Advanced DSP based Technology and having minimum output power factor 0.8 with 415V Three phase input & 415V Three phase output, minimum Efficiency 90% and following minimum accessories. a) in built/Separate isolation Transformer with cabinet b) Paralleling kit with patch cord c) Modbus card d) Suitable size Battery rack e) Total minimum VAH 45240 (SMF battery) for each UPS to provide 30mins. Battery backup at Full load. Make : Amararaja Quanta / Exide Power Safe [ The Agency should provide 3 (three) years warranty & regular maintanance from the date of completion for UPS with isolation Transformer & Batteries.] [ VERTIV make Liebert ITA 40KVA / NUMERIC make KEOR T 40KVA/ APC Model No E3SUPS40KVA ]

COMPOUND LIGHTING

Supply of 3 Core 6 mm² XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts and laying the same incl mending good damages to original finish as to G.S. as follows:- [ Make Nicco / Gloster/ Finolex/Crystal/Polycab]

Concealed in wall

Surface on wall by MS saddle

Through PVC / G.I.pipe

S&F compression type gland & Finishing the end with dowells solderless socket by crimping method for 3 Core 6 sqmm XLPE Ar./Al. Cable.

S&F of following road lighting luminaire ( IP 66 ) with peanut lens and high power LED and to ensure uniform distribution, higher spacing between poles and maintenance free system and suitable for use with 230Volt 50Hz AC supply & suitable for mounting on 50 mm dia (OD) Arm bracket

i. Make: Philips, Type BRP410 LED 092 CW HE MR FG S2 PSU GR / Equivalent product of Crompton/Wipro having similar specification in all respect.

ii. Make: Philips, Type BRP410 LED 110 CW HE MR FG S2 PSU GR / Equivalent product of Crompton/Wipro having similar specification in all respect

iii. Make: Philips, Type- BRP 322 LED 137 CW NR FG S4 XTFC L GR / Equivalent product of Crompton/Wipro having similar specification in all respect.

S&F 40 mm dia GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded copper wire and making connections as required for fixing outdoor street light type LED light fittings and mending good damages to wall incl. painting etc.

S&F 2 mm thick 200 x 150 x 100 mm GI water proof loop box with 4 way connector/ stud, 15A porcelain kitkat fuse on porcelain chair, rubber gasket, mechanical locking arrangement fixed on wall with earthing attachment complete.

S&F 2 mm thick 250 x 250 x 100 mm GI water proof loop box with 4 way connector/ stud, 15A porcelain kitkat fuse on porcelain chair, rubber gasket, mechanical locking arrangement fixed on wall with earthing attachment complete.

S & F 1.5 M long 50 mm dia GI detachable type Double Arm Bracket with sleeve, GI set bolts & nuts, through bolts with nuts, MS pole Cap etc. as required to be fixed on top of ST pole as per direction of EIC

Providing C.C. (6:3:1 ) muffing 600 x 600 x 760 mm in size above ground level around the pole base complete with 3 mm thick neatly finished cement plastering after dismantling the unserviceable muffing as to G.S.

Painting of 12 Mtr long Steel Tubular Pole with two coats of Al. paint over one coat of red lead/Zinc chromate primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint.

S&Drawing 1.1kV Gr. 3 core 2.5 sq. mm. stranded FRLS PVC unurmared Cu cable in PVC Rigid conduit pipe and existing arm bracket from loop Box to fittings for necessary connection.

S&Drawing 1.1kV Gr. 3 core 2.5 sq. mm. stranded FRLS PVC unurmared Cu cable through pole or Arm bracket from loop Box to fittings for necessary connection.

Finishing the end of 3 x 2.5 mm² copper wire with dowells solderless socket by crimping method as pre GS.

Supply & drawing of 40 mm. GI (ISI-M) pipe for cable protection with all fittings etc in UG trench as per GS.

S&F of 250V, 25A timer controller in SS double door 12-way DB enclosure (L&T/ABB/Hager make, enclosure cat no DBSPN012DD or eqv.) with S&F following electrical accessories & front door locking arrangement with all connections by finishing the ends of 2 x 4 & 1 x 2.5 mm² copper wire with dowells solderless socket by crimping method as to GS, earthing attachment on wall incl. necessary connections as per direction of EIC:-

i) 25A DPMCB (LT make cat no B20250C) -- 1no

ii) 24Hr programmable Digital dial timer (L&T,Cat no 67DDT0) -- 1no

iii) 3 pole power contactor (LT make cat no MNX22/230V) -- 1no

iv) 2 Moduler AC motor starter (Legrand/Myrius Cat no 673031) -- 1no

v) 1 moudle 10A Moduler switch (Make Legrand /Myrius) -- 1no

vi) 3 moudle plate with cover (Make Legrand /Myrius) -- 1no

vii) 25A Auto-Off-Bipass DPDT toggle switch (approved make) - 1no

viii) LED indication lamp (approved make) -- 1 no

ix) Outgoing connector make ELMAX (approved make) -- 2 nos

Shifting of Panel & Hiring of DG Set

Hiring of 500 KVA Silent DG Set.

Hiring of Temporary Panel consisting of 630A SFU as incoming, 800A BBC and 2 x 400A SFU as outgoing.

Operation of 500/ 250 KVA Silent DG Set by skilled manpower for 8 hours.

Supply and pouring of Diesel including transportation upto worksite.

Withdrawing existing different sizes 1.1 K.V Grade 4/3.5 core PVC / XLPE cable from existing under ground trench very carefully one by one and shifting the above cable in proposed masonery cable trench incl. S & F MS clamps as required and mending by cavation of earth soil to original finish as per direction of EIC as follows.

One no cable upto 185 sq. mm. Cable

One no cable above 185 sq. mm. Cable

Two nos cable upto 185 sq. mm. Cable

Dismantling & taking out existing old unnecessary LT panels very carefully after complete commissioning of the new panels from corridors of diffrent floors of Main Block after duly testing & disconnection of all sources of power one by one and shifting the panels to designated location in the campus of SSKM Hospital incl mending good the damages to original finish as per direction of EIC.

SITC OF Lightning conductor

S & Fixing of Lighting Conducter Air terminals made of 15 mm dia 1500 mm long GI pipe ( ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick G I base plate at bottom incl necessary holes etc duly grouted on parapet etc in CC morter (4:2:1)

Cutting cornices/steps etc including cutting recess in buildings etc & supply & fixing 15 mm bore ( ISI Medium) GI pipe protection as below and mending good damages to the building works.

Length upto 0.5 Mtr

Length above 0.5 Mtr

Making soldered joints between conducters, conducters & air terminals for 4 SWG GI ( Hot Dip) wire incl supply of jointing materials and painting with 2 (two) coats bituminous paint.

Making soldered joints between conducters and down pipes / other metalic objects for 14 SWG GI (Hot Dip) wire including supply of necessary 4 SWG GI (Hot Dip) wire, jointing materials and painting with 2 (two) coats bituminous paint.

Hiring charges for scaffolding arrangement including dismantling at the end of work & carriage, for L C installation per storey of building per vertical run.

S & Fixing of GI ( Hot Dip) strips 20mm x 3mm thick for horizontal run on the parapet / roof / wall with GI saddles 1100 mm apart incl mending good the damages to building work

S & Fixing of GI (Hot Dip) strips 20 mm x 3mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl good damages to building work

S & Fixing of Testing Joints by 20 mm x 3 mm thick GI (Hot Dip) strip with 125 mm long grouted on wall having clearance of 6 mm from wall for making connection with thimbles at the end of 7/10 SWG GI (Hot Dip) stranded wire & 4 SWG GI (Hot Dip) wire of vertical conductor & Conductor from earth electrode complete with S & F thimbles, GI bolts, nuts,check-nuts, spring washers etc as required.

Earthing installation with 50mm dia (ISI-Medium) G.I. pipe x 3.04 Mtrs. Long incl. bolt, double nuts & washers for Soft Soil incl. excavation of soil as to GS.

SITC OF DG SET

Supply & delivery at site incl. installation on foundation and commissioning of 600 KVA 415V 50 Hz 3-Ph Silent DG set comprising of engine, alternator, separate AMF panel, base frame, fuel tank, battery, CPCB -II approved Engine and acoustic enclosure having given specifications (up loaded in specification section)

Installation of DG Set

a) S&F exhaust black pipe line (thickness 4 mm.) including S&F flange, nuts, bolts & washers etc. as required from the nearest building wall to top of the building roof. (Vertical run) with suitable high temperature painting.

ii) S&F 250 mm MS heavy type black pipe.

iii) S&F 300 mm MS heavy type black pipe.

v) S&F 250 mm MS heavy type Yee of standard size .

vii) S&F 250 mm MS heavy type long bend .

viii) S&F 250 mm MS Plug incl socket with short piece.

Making insulation by 3" thick glass wool including netting arrangement and covered with 26 SWG aluminium clading as per direction of the EIC.

a) 250 mm dia exhaust pipe.

b) 300 mm dia exhaust pipe.

c) Residential type silenser pipe for 600 KVA.

S&F special type MS angle iron bracket support made of 40x40x6 mm. MS angle with flat iron clamp with nuts, bolts & washers etc. for 250 mm. dia (Vertical Run).

S&F rain protection canopy suitable for 300 mm dia MS exhaust pipe.

S& delivery of 200 ltrs. Capacity barrel made of 2 mm thick MS Sheet.

Supply & delivery of best quality oil hand pump with 1" dia PVC flexible pipe (12' ft. approx.) (Brand approved by EIC)

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts (Neutral earthing for 600 KVA DG Set & Body & AMF panel earthing).

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Extra for connecting the neutral of Transformer/Earth busbar to earth electrode including S & F Galvanized (Hot Dip) Steel strip 65 mm x 8 mm on wall/floor with GI saddles & insulating the same by one layer of PVC strip over one layer of ampere tape

Extra for connecting the neutral of Transformer/Earth busbar to earth electrode including S & F 50 mm x 6 mm Galvanized (Hot Dip) steel strip on wall/floor with GI saddles & insulating the same by one layer of PVC strip over one layer of ampere tape

Hiring charges for scaffolding by bamboo, coir rope by square type arrangement for smooth working and lifting of MS black pipe for vertical installation including dismantling after completion of work.

Supply & laying of 1.1 KV grade 19 core 2.5 sq.mm. PVC copper conductor control cable partly recessed and partly by shaddle on wall to interconnect DG set with AMF panel

Supply & laying of 1.1KV GR. 4 nos (3 x 185 sq. mm.) single core PVC/XLPE Ar/Copper cable from 600 KVA DG alternator to AMF panel through reinforced pipe incl. S&F of reinforced pipe in UG trench or concrete floor as per direction of EIC. (Make :- Havells/ Polycab/ RR Kable )

Supply & laying 1.1 Kv grade 2 x 95 sq. mm. single core flexible copper wire in suitable size flexible PVC pipe on wall / floor from neutral earth bus to DG set neutral point including both side socketing. as per direction of EIC. (Make :- Havells/ Polycab/ RR Kable )

S&F compression type metal gland for 100 mm dia flexible pipe.

S & F compression type brass cable gland & finishing the cable end for 19 core 2.5 sq. mm. PVC/A copper cable.

Finishing the ends of single core . Ar / copper cable & S&F of copper socket , colour maching tape etc.

a) 95 sq. mm

d) 185 sq. mm

S & F EI danger board. (size : 20 cm. x 30 cm.)

S&F 2 Kg capacity Gas pressure (DPC) fire extinguisher on wall by suitable size of iron bracket (Make - Fire Shield / Surex)

Supply, transporation & pouring of HSD Oil.

Supply,transporation & pouring of Mobil Oil.

Terms and condition

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.

If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liability period 1 (One) Year

(Rates should be Quoted inclusive of all taxes & duities and L.W.C. @ 1% as applicable)

SIMPSON AND FERRIS PVT LTD

PARTHA SARKAR

RELIABLE CONSTRUCTION